Notification No. 17/2017-Customs (ADD) Date 11/05/2017
Seeks to levy definitive anti-dumping duty, on Hot Rolled Flat Products of alloy or non-alloy steel originating in or exported from China PR, Japan, Korea RP, Russia, Brazil or Indonesia for a period of five years (unless revoked, superseded or amended earlier) from the date of imposition of the provisional anti-dumping duty, that is, 8th August, 2016..
G.S.R. (E).- Whereas in the matter of ‘Hot-rolled flat products of alloy or non-alloy steel’ (hereinafter referred to as the subject goods) falling under chapter headings 7208, 7211, 7225 or 7226 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) {hereinafter referred to as the Customs Tariff Act}, originating in, or exported from China PR, Japan, Korea RP, Russia, Brazil or Indonesia (hereinafter referred to as the subject countries), and imported into India, the designated authority in its preliminary findings vide notification number 14/09/2016-DGAD, dated the 1st August, 2016, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 1st August, 2016, had recommended imposition of provisional anti-dumping duty on the imports of subject goods, originating in, or exported from the subject countries;
And, whereas, on the basis of the aforesaid findings of the designated authority, the Central Government had imposed provisional anti-dumping duty on the subject goods with effect from the 8th August, 2016 vide notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 44/2016-Customs (ADD), dated the 8th August, 2016, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i) vide number G.S.R. 778
(E), dated the 8th August, 2016, read with Corrigendum dated the 7th September, 2016, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i) vide number G.S.R. 865 (E);
And, whereas the Central Government had extended the anti-dumping duty imposed on subject goods originating in, or exported from the subject countries vide notification No.05/2017-Cus (ADD), dated the 7th February, 2017, published in the Gazette of India, Part II, Section 3, Sub-section (i) vide number G.S.R. 109 (E), dated the 7th February, 2017 up to and inclusive of 7th April, 2017;
And, whereas, the designated authority in its final findings vide notification number 14/09/2016-DGAD dated the 10th April, 2017, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 10th April, 2017, while confirming the preliminary findings dated the 1st August, 2016, has come to the conclusion that–
(i) the subject goods have been exported to India from subject countries below its normal value, thus resulting in dumping of the product;
(ii) the domestic industry has suffered material injury due to dumping of the subject goods;
(iii) the material injury has been caused by the dumped imports of the subject goods originating in or exported from the subject countries,
and has recommended imposition of definitive anti-dumping duty on the imports of subject goods, originating in, or exported from the subject countries and imported into India, in order to remove injury to the domestic industry.
Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs Tariff Act, read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Anti-dumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the aforesaid final findings of the designated authority, hereby imposes definitive anti-dumping duty on the subject goods, the
description of which is specified in column (3) of the Table below, falling under chapter heading of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the country as specified in the corresponding entry in column (4), exported from the country as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), exported by the exporters as specified in the corresponding entry in column (7), and imported into India, an anti-dumping duty at the rate equal to the amount as specified in the corresponding entry in column (8), in the currency as specified in the corresponding entry in column (10) and as per unit of measurement as specified in the corresponding entry in column (9), of the said Table, namely :-
Table
| S. No | Chapter heading | Description of Goods | Country of Origin | Country of Export | Producer |
Exporter | Duty Amount | Unit of measure
-ment | Currency | |
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | |
| 1. | 7208, 7211, 7225 or 7226 | Hot-rolled flat products of alloy or non-alloy steel in coils of a width upto 2100 mm and thickness upto 25 mm | Korea RP | Korea RP | M/s Hyundai Steel Company | 1. M/s Hyundai Steel Company, Korea RP2. M/s GS Global Corp., Korea RP3. M/s Hyundai Corporation, Korea RP4. M/s Main Steel Co. Ltd., Korea RP 5. M/s P&A Corporation, Korea RP
6. Ohmi Industries Ltd., Japan | 478 | Metric Ton | United
States
Dollar | |
| 2. | 7208, 7211, 7225 or 7226 | Hot-rolled flat products of alloy or non-alloy steel in coils of a width upto 2100 mm and thickness upto 25 mm | Korea RP | Korea RP | M/s POSCO | 1. M/s POSCO, Korea RP
2. M/s POSCO Daewoo Corporation, Korea RP
3. M/s GS Global Corp, Korea RP
4. M/s Hyundai Corporation, Korea RP
5. M/s Samsung C&T Corporation, Korea RP
6. M/s POSCO Asia, Hong Kong
7. POSCO P&S, Korea RP | 489 | Metric Ton | United
States
Dollar | |
| 3. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Korea RP | Korea RP | | Any combination other than S. No. 1 & 2 | 489 | Metric Ton | United
States
Dollar | |
| 4. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Korea RP | Any country other than those subject
to anti
dumping duty | Any |
Any | 489 | Metric Ton | United
States
Dollar | |
| 5. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those
subjec
t to anti
dumpi ng duty | Korea RP | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 6. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in coils of a width upto 2100 mm and thickness upto 25 mm | Japan | Japan | JFE Steel Corporation | 1. Honda Trading Corporation, Japan
2. JFE Shoji Trade Corporation, Japan
3. Metal One Corporation, Japan
4. Mitsui & Co. Ltd,
5. Ohmi Industries Ltd., Japan
6. Uttam Galva International Pte. Ltd.,
Singapore
7. Uttam Galva International FZE, UAE
8. Toyota Tshusho Corporation, Japan
9. Marubeni-Itochu Steel Inc., Japan | 489 | Metric Ton | United
States
Dollar | |
| 7. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Japan | Japan | M/s. Nippon
Steel &
Sumitomo
Metal
Corporation | 1. Hanwa Co., Ltd, Japan
2. Honda Trading Corporation, Japan
3. Kanematsu Corporation Ltd, Japan
4. Marubeni-Itochu Steel Inc., Japan
5. Metal One Corporation, Japan
6. Mitsui & Co. Ltd, Japan
7. Nippon Steel &Sumikin Bussan Corporation, Japan
8. Sumitomo Corporation, Japan
9. Toyota Tshusho Corporation, Japan
10. Ohmi Industries Ltd, Japan | 489 | Metric Ton | United
States
Dollar | |
| 8. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Japan | Japan | | Any combination other than S. No. 6 & 7 | 489 | Metric Ton | United
States
Dollar
|
| 9. | 7208,
7211, 7225 or
7226 | Hot-rolled flat
products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Japan
| Any
country otherthan those subject to anti
dumping duty | Any | Any | 489 | Metric
Ton | United
States Dollar | |
| 10. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those
subjec
t to anti
dumpi ng duty | Japan | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 11. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | China PR | China PR | 1. M/s Zhan gjiaga ng GTA Plate Co., Ltd.
2. M/s Zhan gjiaga ngHo ngcha ng Plate Co., Ltd.,
3. M/s Zhan gjiaga ngSha jing Heavy Plate Co., Ltd., | 1. M/s Jiangsu Shagang International Trade Co., Ltd., China PR
2. M/s Shagang International (Singapore) Pte LTD., Singapore
3. M/s Xinsha International PTE Ltd., Singapore,
4. M/s Burwill Resources Limited, BVI 5. M/s Future Materials Industry (Hong Kong) Co. Ltd., Hong Kong
6. M/s Lu Qin (Hong Kong) Co. Ltd., Hong Kong
7. M/s Ningbo Cimei Import & Export Co. Ltd., China PR
8. M/s Steelco Pacific Trading Limited, Hong Kong
9. M/S GS Global Corp., Korea R | 489 | Metric Ton | United
States
Dollar | |
| 12. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | China PR | China PR | | Any combination other than S. No. 11 | 489 | Metric Ton | United
States
Dollar | |
| 13. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | China PR | Any country other than those subject
to anti
dumping duty | Any | Any
| 489 | Metric Ton | United
States
Dollar | |
| 14. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those subjec
t to anti
dumpi ng duty | China PR | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 15. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Russia
| Russia
| Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 16. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Russia | Any country other than those subject to anti
dumping duty | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 17. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those
subjec
t to anti
dumpi ng duty | Russia
| Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 18. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Brazil
| Brazil | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 19. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in coils of a width upto
2100 mm and thickness upto 25
mm | Brazil | Any country other than those
subject
to anti
dumping duty | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 20. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those subjec
t to anti
dumpi ng duty | Brazil | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 21. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Indone
sia | Indonesi a | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 22. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Indone
sia | Any country other than those subject to anti
dumping duty | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 23. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel in
coils of a width upto
2100 mm and thickness upto 25
mm | Any countr y other than those
subjec
t to anti
dumpi ng duty | Indonesi a | Any | Any | 489 | Metric Ton | United
States
Dollar | |
| 24. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Korea RP | Korea RP | M/s Hyundai
Steel
Company
| 1. M/s GS Global Corp., Korea RP
2. M/s Hyundai Corporation, Korea RP | 561 | Metric Ton | United
States
Dollar | |
| 25. | 7208,
7211, 7225 or
7226 | Hot-rolled flat
products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Korea
RP | Korea
RP | M/s POSCO | 1. M/s POSCO Daewoo Corporation, Korea RP
2. M/s GS Global Corp, Korea RP
3. M/s Hyundai Corporation, Korea RP
4. M/s POSCO Asia, Hong Kong
5. POSCO P&S, Korea RP | 561 | Metric
Ton | United
States Dollar | |
| 26. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Korea RP | Korea RP | | Any combination other than S. No. 1 & 2 | 561 | Metric Ton | United
States
Dollar
|
| 27. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Korea RP | Any country other than those subject to anti
dumping duty | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 28. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Any countr y other than those subjec
t to
anti
dumpi ng duty | Korea RP | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 29. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel not in coils (commonly known as sheets and plates) of a width upto 4950 mm and thickness upto 150 mm | Japan | Japan | JFE Steel Corporation | 1. JFE Shoji Trade Corporation, Japan
2. Metal One Corporation, Japan
3. Mitsui & Co. Ltd, Japan
4. Ohmi Industries, Ltd., Japan
5. Toyota Tshusho Corporation, Japan
6. Shinsho Corporation, Japan
7. Marubeni-Itochu Steel Inc., Japan
8. Kyusho Co. Ltd., Japan | 561 | Metric Ton | United
States
Dollar | |
| 30. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Japan | Japan | M/s Nippon
Steel &
Sumitomo
Metal
Corporation | 1. Hanwa Co. Ltd, Japan
2. Mitsui & Co. Ltd, Japan
3. Nippon Steel &Sumikin Bussan Corporation, Japan
4. Sumitomo Corporation, Japan
5. Ohmi Industries Ltd, Japan | 561 | Metric Ton | United
States
Dollar | |
| 31. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Japan | Japan | | Any combination other than Sl. No. 6 & 7 | 561 | Metric Ton | United
States
Dollar
|
| 32. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Japan | Any country other than those subject to anti
dumping duty | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 33. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Any countr y other than those subjec
t to anti
dumpi ng duty | Japan | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 34.
| 7208,
7211, 7225 or
7226
| Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | China PR
| China PR
| 1. M/s Zhangj iagang GTA Plate Co., Ltd.
2. M/s Zhangj iagang Hongc hang Plate Co., Ltd.,
3. M/s Zhangj iagang Shajin g Heavy Plate Co., Ltd | 1. M/s Jiangsu Shagang International Trade Co. Ltd., China PR
2. M/s Shagang International (Singapore) Pte Ltd., Singapore
| 561
| Metric Ton
| United
States
Dollar | |
| | | | | | | | | | | |
| 35. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel not in coils (commonly known as sheets and plates) of a width upto 4950 mm and thickness upto 150 mm | China PR | China PR | 1. M/s Wuyan g New Heavy & Wide Steel Plate Co. Ltd
2. M/s Wuyan g Iron and Steel Co. Ltd | 1. M/s Wuyang Iron and Steel Co. Ltd., China PR
2. Hebei Iron & Steel (Hong Kong) International Trade Co. Ltd, Hong Kong
3. Hebei Iron & Steel (Singapore) PTE. Ltd, Singapore
4. Salzgitter Mannesmann International GmbH, Germany
5. Burwill Resources Limited, BVI | 561 | Metric Ton | United
States
Dollar | |
| 36. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | China PR | China PR | | Any combination other than S. No. 12 & 13 | 561 | Metric Ton | United
States
Dollar
|
| 37. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | China PR | Any country other than those subject
to anti
dumping duty | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 38. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Any countr y other than those subjec t to anti
dumpi ng duty | China PR | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 39.
| 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or non-alloy steel not in coils (commonly known as sheets and plates) of a width upto 4950 mm and thickness upto 150 mm | Russia
| Russia
| Any
| Any
| 561
| Metric Ton
| United
States
Dollar | |
| | | | | | | | | | | |
| 40. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Russia | Any country other than those subject
to anti
dumping duty | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 41. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Any countr y other than those subjec
t to anti
dumpi ng duty | Russia | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 42. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Brazil | Brazil
| Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 43. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Brazil | Any country other than those subject
to anti
dumping duty | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 44. | 7208,
7211,
7225 | Hot-rolled flat products of alloy or non-alloy steel not in | Any countr y other | Brazil | Any | Any | 561 | Metric Ton | United
States
Dollar | |
| | or
7226 | coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | than those subjec
t to anti
dumpi ng duty | | | | | | | |
| 45. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Indone
sia | Indonesi a
| Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 46. | 7208,
7211, 7225 or
7226 | Hot-rolled flat products of alloy or
non-alloy steel not in coils (commonly
known as sheets and plates) of a width
upto 4950 mm and thickness upto 150
mm | Indone
sia | Any country other than those subject to anti
dumping
duty
| Any | Any | 561 | Metric Ton | United
States
Dollar | |
| 47. | 7208, 7211, 7225 or 7226 | Hot-rolled flat products of alloy or non-alloy steel not in coils (commonly
known as sheets and plates) of a width upto 4950 mm and thickness upto 150 mm | Any country other than those subject to anti dumping duty | Indonesi a | Any | Any | 561 | Metric Ton | United
States
Dollar | |
Note: The description of the subject goods excludes the following:-
(a) Hot-rolled flat products of stainless steel;
(b) Hot-rolled flat products of steel which are electrolytically plated or coated with zinc;
(c) Hot-rolled flat products of steel otherwise plated or coated with zinc; or
(d) Cladded steel.
2. The anti-dumping duty imposed under this notification shall be effective for a period of five years (unless revoked, superseded or amended earlier) from the date of imposition of the provisional anti-dumping duty, that is, the 8th August, 2016, and shall be payable in Indian currency:
Provided that the said anti-dumping duty shall not be levied for the period commencing from the date of the lapse of the provisional anti-dumping duty, that is, the 8th April, 2017 upto the publication of this notification in the Official Gazette.
Explanation.- For the purposes of this notification, rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Act.
[F.No.354/119/2016-TRU]
(Mohit Tewari)
Under Secretary to the Government of India
Presented by eximkey.com