APPENDIX- 10 B
APPLICATION FORM FOR GRANT OF ADVANCE LICENCE UNDER THE DUTY EXEMPTION SCHEME
1. Please see paragraph 4.1.1 of the Policy and Paragraph 4.4, 4.42, 4.5, 4.7 of this Handbook (Vol.I).
2. Please read the general instructions given at Appendix 1 before filling this application.
3. Please submit 2 copies of this application (10 copies if no Standard input-output norms are fixed).
FOR OFFICIAL USE
|
File No........................... | Date......................... |
|
1. | Name and address of the applicant | : | ...........................
...........................
........................... |
| 2. | I.E.Code No. | : | ........................... |
| 3. | (a) | Name and address of the manufacturer/ supporting/co-manufacturer: | | .........................
.........................
.........................
|
| (b) | Type of unit ......... | Registration No.......... | Date ........ |
| 4. | Total FOB value of exports including commission. | Rs..........
of exports | In currency of exports | ........... | In US$ .... |
| 5. | Total CIF value of imports: | Rs..........
of exports | In currency of exports | ........... | In US$ .....
|
| 6. | VALUE ADDITION | : | | | |
| 7. | Application fee: | a) Bank Receipt/D.D No.and date: | .......................... |
| b) Issued by: | .......................... |
| 8. | Port of Registration: | : ................................................... |
| 9. | Sr.No. of Standard Input-Output Norms: | : |
| 10. | Supply Order No | : | ............. date : ................ |
| 11. | Name and address of the Project Authority/Ultimate Exporter | : | |
| 12. | Delivery period of supply | : | |
(Column 11 and 12 are applicable for Advance Licence for intermediate supply and Advance Licence for deemed exports)
|
13. | If the application is for Advance Licence for deemed export; indicate: |
| i) | Credit under which Project is financed | : .................................... |
| ii) | Method by which the order is procured.
(International Competitive Bidding etc.) | : .................................... |
14. Details of outstanding export obligation against Advance Licence including Annual Advance Licence/pre-export DEPB issued under Duty Exemption Scheme.
| S.No. | Licence No. and Date | CIF value(Rs.) | FOB value(Rs.) | Percentage of export obligation fulfilled | Date of expiry of export obligation period |
| | | | | Quantity wise | Value wise | |
| | | | | | | |
15. Details of the products to be exported/supplied (Resultant Products).
| S.No. | Resultant product(s) | Total quantity | Unit of measurement | FOB value
|
| | Name, Technical Characteristics and quality | ITC(HS) Code | | Name | Code | In rupees | In freely convertible currency (FCC) |
| | | | | | | | |
16. Details of Items sought to be Imported Duty free (Arranged Item wise)
|
S.No. | Import item | Total quantity | Unit of measurement | Total CIF value | Total exemption from Customs duty
|
| | Name, Technical characteristics and quality | ITC(HS)Code | | Name | Code | Rs. | In free foreign exchange | |
| | | | | | | | | |
17. Export Performance during the preceding three years:
| S. No | Year | FOB value of exports (in Rs crores) |
|---|
| 1 | | |
| 2 | | |
| 3 | | |
(S.No 17 has been inserted in Appendix 10 B vide
PN. No. 12(RE-02), Dt. 2/5/2002)
18. Details of other materials to be used in resultant product and sought to be imported/procured from sources other than the licence on which drawback benefits is to be availed.
(This column need not be filled if benefit of drawback is not being sought)
|
S.No | Resultant product(s) (Name, Technical characteristics and quality) | Total quantity | Imported item | Indigenously procured item |
| | | | Name, Technical Characteristics and Quality | Quantity and unit of measure-ment | CIF value | Name, Technical Character-istics and Quality | Quantity and unit of measurement | Value |
| | | | | | | | | |
DECLARATION/UNDERTAKING
1. I/We hereby declare that the particulars and the statements made in this application are true and correct to the best of my/our knowledge and belief and nothing has been concealed or held therefrom.
2. I/We fully understand that any information furnished in the application if proved incorrect or false will render me/us liable for any penal action or other consequences as may be prescribed in law or otherwise warranted.
3. I/We undertake to abide by the provisions of the Foreign Trade (Development and Regulation) Act, 1992, the Rules and Orders framed thereunder, the export and Import Policy and the Handbook of Procedures.
4. I/We further declare that no export proceeds are outstanding beyond the prescribed period as laid down by the RBI, or such extended period for which RBI permission has been obtained.
5. I hereby certify that I am authorised to verify and sign this declaration as per Paragraph 9.9 of the Policy.
| Place : | Signature of the Applicant:........................ |
| Date : | Name: ........................ |
| | Designation:........................ |
| | Official Address:........................
....................... |
| | Tele No: ........................ |
| | E-Mail Address........................ |
Documents to be enclosed with the application form:
1. Bank Receipt (in duplicate)/Demand Draft evidencing payment of application fee in terms of Appendix-29
2. Project Authority Certificate in case of application for Advance Licence for deemed export excepting
a. in cases of supplies to an EPCG licence holder wherein an invalidation letter would suffice,
b. supplies against advance licence and
c. supplies to EOU/ EPZ/ EHTP/ STP/ SEZ ;
and a copy of invalidation letter in case of application for Advance Licence for intermediate supply.
(Sl. No. 2. has been amended vide
PN. No. 39/2002-07, Dt. 08/10/2002)
[OLD - 2. Project Authority Certificate in case of application for Advance Licence for deemed export (except in the case of supplies to an EPCG licence holder wherein the invalidation letter would suffice) or a copy of invalidation letter in case of application for Advance Licence for intermediate supply.
]
(Above SL. No. 2. has been amended vide
PN No. 21/2002, Dt. 01/07/2002)
[OLD -
2. Project Authority Certificate in cases application for Advance Licence for deemed export and a copy of invalidation letter in case of application for Advance Licence for intermediate supply.
]
3. In cases where import of fuel has been sought for the grant of Advance Licence (excluding applications for adhoc norms and those under para 4.7 of Handbook ) , the applicant would be required to submit the following additional documents:
(a) Copy of the permission issued to the manufacturer exporter by the competent authority (concerned State Electricity Board or Power Corporation or Regulatory Commission of the concerned State) under Section 44 of the Electricity (Supply) Act, 1948 for the installation of captive power plant based on the specified fuel unless the permission is specifically waived by the State Electricity Board.
(Above Sl. No. 3(a) has been amended vide PN No. 65/2002-03, Dt. 28/02/2003)
[OLD -
a) Copy of the permission issued to the manufacturer exporter by the competent authority (concerned State Electricity Board or Power Corporation or Regulatory Commission of the concerned State) under Section 44 of the Electricity (Supply) Act, 1948 for the installation of captive power plant based on the specified fuel. ]
b) Copy of the letter intimating the date of commissioning of the Captive Power Plant to the concerned authority which issued the permission letter.
Note: The import of only such fuel(s) shall be allowed which have/ has been specified in the said permission.
(Above Sl. No. 3) has been added vide
PN NO. 18/2002, Dt. 14/06/2002)
Annexure to Appendix- 10B
Note: To be submitted only in cases where Standard Input Output Norms are not fixed and application is preferred under paragraph 4.42 and 4.7 of Handbook (Vol.1).
1. Details of Items required for manufacture of one Unit of Export Product:
(a) Imported inputs:
|
S.No. | Required import item | Quantity required per unit of resultant product | Purpose of requirement * | Wastage claimed (%age)on net content basis. | Recoverable wastage/by product |
| | Description | Technical Character-istics | ITC(HS) Code | | | | Name | Quantity | value |
| | | | | | | | | | |
* Purpose of requirement should be indicated against each item whether the same is required as raw material, components, consumables solvents, catalysts, packing material etc.
(b) Indigenous inputs
|
S.No. | Required import item | Quantity required per unit of resultant product | Purpose of requirement * | Wastage claimed (%age)on net content basis. | Recoverable wastage/by product |
| | Description | Technical Characteristics | ITC(HS) Code | | | | Name | Quantity | value |
| | | | | | | | | | |
2. Production and consumption data of the manufacturer/supporting manufacturer (of preceding three licensing years duly certified by the Chartered Accountant/Cost and Works Accountant):
|
Year | Total production of the resultant product | Quantity of different Items consumed | Quantity consumed/unit production |
| (1) | (2) | (3) | (4) |
| | | | |
3. Particulars of the licences obtained in the past and ratified by ALC (with or without modification) for the same export product covered under this application.
| S.No | Licence No & Date | Description of export product | Description of import items | Import item qty per unit of export product (as applied for) | Import item qty per unit of export product (as approved by ALC while ratifying licence) | ALC Meeting No & Date when approved |
| | | | | | | |
(S. No. 3 of above Annexure has been amended vide
PN No. 48/2002-07, Dt. 14/11/2002)
[OLD -3. Details of earlier licences obtained (if any) for the resultant product during the preceding two licensing years.
|
S.No. | Licence no. date and issuing authority | Whether based on ALC/SALC norms (please specify enclosing a copy of licence | Norms adopted per unit resultant product (items No.in the same order as in S.No.4 above |
| (1) | (2) | (3) | (4) |
| | | | |
]
4. Please furnish technical details as per Annexure-I of Appendix-10 depending upon the resultant product. Please confirm.
c
| 5. | a) FOB value of exports in the preceding licensing years | : |
| b) CIF value of licences already obtained under paragraph 4.7: | : |
| c) Balance entitlement as per paragraph 4.71. | : |
CHARTERED ENGINEER CERTIFICATE
I have examined the applicant company"s import requirements of raw materials, components etc with regard to their technical description/ specification and the quantity against each item of import and having regard to proper technical norms of consumption and after technical scrutiny of relevant designs and drawings, I hereby certify that they are correct in all respects and are actually required for the execution of the export/supply contracts for .........................The list of Items covers _________ pages and contains __________ items for a total value of Rs._____________ (in free foreign exchange __________ )
Signature...........................
Name in Block letters................
Designation..........................
Address..............................
|
Place: ............. | Name and Address of the Institution under which Chartered | : ............... |
| Date: .............. | Ref No. and date of Corporate Membership | : ............... |
DECLARATION/UNDERTAKING
I/We hereby declare that in respect of product for which Standard Input Output norms are not fixed, we shall abide by the final fixation of norms by ALC and shall pay to the Government Customs duty together with 15% interest on the unutilised inputs as per norms fixed by ALC.
|
Place : | | Signature of the Applicant: | ........................ |
| Date : | | Name: | ........................ |
| | | Designation: | ........................ |
| | | Official Address: | ......................
........................ |
| | | Tele No: | ........................ |
| | | E-Mail Address | ........................ |