|
S. No. |
RS2 ECCNs |
Description |
|
1. |
0A606.b. |
Ground vehicles, parts and components, as follows:
1. Unarmed vehicles that are derived from civilian vehicles and that have all of the following:
a. Manufactured of fitted with materials or components other than reactive or electromagnetic armour to provide ballistic protection to level III (National Institute of Justice Standard 0108.01, September 1985) or better;
b. A transmission to provide drive to both front and rear wheels simultaneously, including those vehicles having additional wheels for load bearing purposes whether driven or not;
c. Gross vehicles weight rating (GVWR) greater than 4,500 kg; and
d. Designed or modified for off-road use.
2. Parts and components having all of the following:
a. Specially designed for vehicles specified in paragraph b.1 of this entry; and
b. Providing ballistic protection to level III (National Institute of Justice Standard 0108.01, September 1985) or better
|
|
2. |
0A918 |
Bayonets |
|
3. |
0E918 |
“Technology” for the “development”, “production” or “use” of bayonets. |
|
4. |
1A004 |
Protective and detection equipment and components, not specially designed for military use, as follows (see List of Items Controlled).
a. Gas masks, filter canisters and decontamination equipment therefore designed or modified for defence against any of the following, and specially designed components therefor:
a.1. Biological agents ‘adapted for use in war’;
a.2. Radioactive materials ‘adapted for use in war’;
a.3. Chemical warfare (CW) agents; or
a.4. ‘Riot control agents’,
b. Protective suits, gloves and shoes, specially designed or modified for defense against any of the following:
b.1. Biological agents ‘adapted for use in war’;
b.2. Radioactive materials ‘adapted for use in war’; or
b.3. Chemical warfare (CW) agents;
c. Nuclear, biological and chemical (NBC) detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:
c.1. Biological agents ‘adapted for use in war’;
c.2. Radioactive materials ‘adapted for use in war’; or
c.3. Chemical warfare (CW) agents;
d. Electronic equipment designed for automatically detecting or identifying the presence of “explosives” residues and utilizing ‘trace detection’ techniques (e.g. Surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).
|
|
5. |
1D003 |
“Software” specially designed or modified to enable equipment to perform the functions of equipment controlled under 1A004.c. and 1A004.d. |
|
6. |
1E001 |
“Technology” according to the General Technology Note for the “development” or “production” of items controlled by 1A004.d. |
|
7. |
2A983 |
Explosives or detonator detection equipment, both bulk and trace based, consisting of an automated device, or combination of devices for automated decision making to detect the presence of different types of explosives, explosive residue, or detonators; and parts and components, n.e.s. |
|
8. |
2A984 |
Concealed object detection equipment operating in the frequency range from 30 GHz to 3000 GHz and having a spatial resolution of 0.5 milliradian up to and including 1 milliradian at a standoff distance of 100 meters; and parts and components, not elsewhere specified. |
|
9. |
2B018 |
Equipment as follows: Specialized machinery, equipment, gear and specially designed parts and accessories therefor, including but not limited to the following, that are specially designed for the examination, manufacture, testing and checking of arms, appliances, machines and implements of war:
a. Armor plate drilling machines, other than radial drilling machines;
b. Armor plate planing machines;
c. Armor plate quenching presses;
d. Centrifugal casting machines capable of casting tubes 6 feet (183 cm) or more in length, with a wall thickness of 2 inches (5 cm) and over;
e. Gun barrel rifling and broaching machines, and tools therefor;
f. Gun barrel rifling machines;
g. Gun barrel trepanning machines;
h. Gun boring and turning machines;
i. Gun honing machines of 6 feet (183 cm) stroke or more;
j. Gun jump screw lathes;
k. Gun rifling machines;
l. Gun straightening presses;
m. Induction hardening machines for tank turret rings and sprockets;
n. Jigs and fixtures and other metal-working implements or accessories of the kinds exclusively designed for use in the manufacture of firearms, ordnance and other stores and appliances for land, sea or aerial warfare;
o. Small arms chambering machines;
p. Small arms deep hole drilling machines and drills therefor;
q. Small arms rifling machines;
r. Small arms spill boring machines;
s. Tank turret bearing grinding machines.
|
|
10. |
2D983 |
Software specially designed or modified for the development, production, or use of equipment controlled by 2A983. |
|
11. |
2D984 |
Software required for the development, production, or use of concealed object detection equipment controlled by 2A984. |
|
12. |
2E983 |
Technology specially designed or modified for the development, production, or use of equipment controlled by 2A983, or the development of software controlled by 2D983. |
|
13. |
2E984 |
Technology required for the development, production, or use of equipment controlled by 2A984 or required for the development of software controlled by 2D984. |
|
14. |
6A003.b.4.b |
Uncooled thermal imaging cameras |
|
15. |
6A998.c. |
Millimetre wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following:
1. Operates at a frequency of 94 GHz;
2. An average output power of less than 20 mW;
3. Radar beam width of 1 degree; and
4. Operating range equal to or greater than 1500 m
|
|
16. |
6A999.c. |
Seismic intrusion detection systems that detect, classify and determine the bearing on the source of a detected signal. |
|
17. |
6D991 |
Software not elsewhere specified specially designed for the development, production, or use of commodities controlled by 6A998.c. |
|
18. |
6D993.b. |
Software specially designed for seismic intrusion detection systems controlled by 6A999.c. |
|
19. |
9A515.e. |
Microelectronic circuits (e.g. integrated circuits and micro-circuits) that are rated, certified, or otherwise specified or described as meeting or exceeding all the following characteristics and that are specially designed for defence articles controlled by Unites States Munitions List. |