CHAPTER-48

Paper and paperboard; articles of paper pulp, of paper or of paperboard

Notes :

1. For the purposes of this chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m2’

2. This chapter does not cover :

(a) Articles of Chapter 30;

(b) Stamping foils of heading 3212;

(c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33);

(d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 3401), or with polishes, creams or similar preparations (heading 3405);

(e) Sensitised paper or paperboard of headings 3701 to 3704

(f) Paper impregnated with diagnostic or laboratory reagents (heading 3822);

(g) Paper-reinforced stratified of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter consituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 4814 (chaper 39);

(h) Articles of heading 4202 (for example, travel goods);

(ij) Articles of chaper 46 (manufactures of plaiting material);

(k) Paper yarn or textile articles of paper yarn (Section XI);

(l) Articles of Chapter 64 or Chapter 65;

(m) Abrasive paper or paperboard (heading 6805) or paper or paperboard-backed mica (heading 6814) (paper and paperboard coated with mica powder are, however, to be classified in this chapter);

(n) Metal foil backed with paper or paperboard (generally Section XIV or XV) [OLD(Section XV)];

(o) Articles of heading 9209; or

(p) Articles of Chapter 95 (for example, toys, games, sports requisites) or Chapter 96 (for example, buttons).

3. Subject to the provisions of Note 7, headings 4801 to 4805 include paper and paperboard which have been subjected to calendering, super-calendering, glazing or similar finishing, false water-marking or surface sizing , and also paper, paperboard, cellulose wadding and webs of cellulose fibres, coloured or marbled throughout the mass by any method. Except where heading 4803 otherwise requires, these headings do not apply to paper, paperboard, cellulose wadding or webs of cellulose fibres which have been otherwise processed.

4. In this chapter the expression “newsprint” means uncoated paper of a kind used for the printing of newspaper, of which not less than 50% [OLD65%] by weight of the total fibre content consists of wood fibres obtained by a mechanical or chemi-mechanical process, unsized or vey lightly sized, having a surface roughness parker print surf (1 Mpa) on each side exceeding 2.5 micrometres (microns), weighing not less than 40 g/m2 and not more than 65 g/m2

5. For the purposes of heading 4802, the expressions “paper and paperboard, of a kind used for writing, printing or other graphic purposes” and “non perforated punch-cards and punch tape paper” means paper and paperboard made mainly from bleached pulp or from pulp obtained by a mechanical or chemi-mechanical process and satisfying any of the following criteria:

For paper or paperboard weighing not more than 150 g/m2 ;

(a) Containing 10% or more of fibres obtained by a mechanical or chemi-mechanical process, and

1. Weighing not more than 85 g/m2 , or

2. Coloured throughout the mass; or

(b) Containing more than 8% ash, and

1. Weighing not more than 80 g/m2 , or

2. Coloured throughout the mass; or

(c) Containing more than 3% ash and having a brightness of 60% or more, or

(d) Containing more than 3% but not more than 8%, ash, having a brightness less than 60%, and a burst index equal to or less than 2.5Kpa. m2g; or

(e) Containing 3% ash or less, having a brightness of 60% or more and a burst index equal to or less than 2.5 Kpa.m2/g: For paper or paperboard weighing more than 150 g/m2 :

(a) Coloured throughout the mass; or

(b) Having a brightness of 60% or more, and

1. a caliper of 225 micrometres (microns) or less, or

2. a caliper more than 225 micrometres (microns) but not more than 508 micrometres (microns) and an ash content more than 3%; or

(c) having a brightness of less than 60%, a caliper of 254 micrometres (microns) or less and an ash content more than 8%.

Heading 4802 does not, however, cover filter paper or paperboard (including tea-bag paper) or felt paper of paperboard;

6. In this chapter “Kraft paper and paperboard” means paper and paperboard of which not less than 80% by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes.

7. Except where the terms of the headings otherwise require, paper, paperboard , cellulose wadding and webs of cellulose fibres answering to a description in two or more of the headings 4801 to 4811 are to be classified under that one of such headings which occurs last in numerical order in this schedule.

8. Headings 4801, and 4803, to 4809, apply only to paper, paperboard, cellulose wadding and webs of cellulose fibres :

(a) In strips or rolls of a width exceeding 36cm; or

(b) In rectangular (including square) sheets with one side exceeding 36 cm and the other side exceeding 15 cm in the unfolded state.

9. For the purposes of heading 4814, the expression “wall paper and similar wall coverings” applies only to :

(a) Paper in rolls, of width of not less than 45 cm and not more than 160 cm suitable for wall or ceiling decoration :

(i) Grained, embossed, surface-coloured, design-printed or otherwise surface-decorated (for example [OLDe.g.], with textile flock), whether or not coated or covered with transparent protective plastics ;

(ii) With an uneven surface resulting from the incorporation of particles of wood, straw etc. ;

(iii) Coated or covered on the face side with plastics, the layer of plastics being grained, embossed, coloured, design-printed or otherwise is decorated ; or

(iv) Covered on the face side with plaiting material, whether or not bound together in parallel strands or woven ;

(b) Borders and friezes, of paper, treated as above whether or not in rolls, suitable for wall or ceiling decoration ;

(c) Wall coverings of paper made up of several panels, in rolls or sheets, printed so as to make up a scene, design or motif when applied to a wall.

Products on a base of paper of paperboard, suitable for use both as floor coverings and as wall coverings, are to be classified in heading 4823 [OLD4815]

10. Heading 4820 does not cover loose sheets or cards, cut to size, whether or not printed, embossed or perforated.

11. Heading 4823 applies, inter alia, to perforated paper or paperboard cards for Jacquard or similar machines and paper lace.

12. Except for the goods of heading 4814 or 4821 , paper, paperboard, cellulose wadding and articles thereof, printed with motifs, characters or pictorial representations, which are not merely incidental to the primary use of the goods, fall in Chapter 49.

(Note 2, 4 & 9 has been substituted vide NOTIFICATION NO. 94/2008, DT. 02/03/2009)

Sub-Heading Notes :-

1. For the purposes of sub-headings 4804 11 and 480419, “Kraft-liner” means machine-finished or machine glazed paper and paperboard, of which not less than 80% by weight of the total fibre content consists of wood fibre obtained by the chemical sulphate or soda processes, in rolls, weighing more that 115 g/m2 and having a minimum Mullen bursting strength as indicated in the following table or the linearly interpolated or extrapolated equivalent for any other weight.

Weight g/m2	Minimum Mullen bursting strength Kpa
115	393
125	417
200	637
300	824
400	961

2. For the purposes of sub-headings 480421 and 480429, “sack kraft paper” means machine-finished paper, of which note less than 80% by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes, in rolls, weighing not less than 60 g/m2 but not more than 115 g/m2 and meeting one of the following sets of specifications :

(a) Having a Mullen burst index of not less than 3.7 kPa m2/g and a stretch factor of more than 4.5% in the cross direction and of more than 2% in the machine direction.

(b) Having minimum for tear and tensile as indicate in the following table or the linearly interpolated equivalent for any other weight :

Weight g/m2	Minimum tear mN		Minium tensile kN/m
	Machine Direction	Machine direction plus Cross direction	Cross direction	Machine direction plus Cross direction
60	700	1,510	1.9	6
70	830	1,790	2.3	7.2
80	965	2,070	2.8	8.3
100	1,230	2,635	3.7	10.6
115	1,425	3,060	4.4	12.3

3. For the purposes of sub-heading 480511, ‘semi-chemical fluting paper” means paper, in rolls, of which not less thatn 65% by weight of the total fibre content consists of unbleached hardwood fibres obtained by a semi-chemical pulping process, and having a CMT 30 (Corrugated Medium Test with 30 minutes of conditioning) crush resistance exceeding 1.8 newtons/g/m2 at 50% relative humidity, at 230C.

4. Sub-headings 480512 covers paper, in rolls, made mainly of straw pulp obtained by a semi-chemical process, weighing 130 g/m2 or more, and having a CMT30 (corrugated medium test with 30 minutes of conditioning) crush resistance exceeding 1.4 newtons/g/m2 at 50% relative humidity, at 230 C.

5. Sub-heading 480524 and 480525 cover paper and paperboard made wholly or mainly of pulp of recovered (waste and scrap) paper or paperboard. Testliner may also have a surface layer of dyed paper or of paper made of bleached or unbleached non-recovered pulp. These products have a Mullen burst index of not less than 2kPa.m2/g.

6. For the purposes of sub-heading 480530, “sulphite wrapping paper” means machine-glazed paper, of which more than 40% by weight of the total fibre content consists of wood fibres obtained by the chemical sulphite process, having an ash content not exceeding 8% and having a Mullen burst index of not less that 1.47 kpa. M2/g.

7. For the purposes of sub-heading 4810 22, “light-weight coated paper” means paper, coated on both sides, of total weight not exceeding 72 g/m2, with a coating weight not exceeding 15 g/m2 per side, on a base of which not less that 50% by weight of the total fibre content consists of wood fibres obtained by a mechanical process.