Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
After the existing entry at Sl.No.A-2515, the new entries from Sl.No.A-2516 to A-2525 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1577, the new entries from Sl.No.C-1578 to A-1582 shall be added as per Annexure ”C” to this Public Notice.
After the existing entry at Sl.No.E-89, the new entries Sl.No.E-90 to E-93 shall be added as per Annexure ”D” to this Public Notice.
After the existing entry at Sl.No.H-434, the new entry Sl.No.H-435 shall be added as per Annexure ”E” to this Public Notice.
| 5. | 294 | Chemicals & Allied
Products
Sl.No.A2205 | - The description of import item at Sl. No. 1
(without any change in quantity) shall be
amended to read as under:-
“Bleached Soft Wood Pulp”
- The quantity of import item Nos. at Sl. 4 &
5 shall be amended to read as under:-
“4. 0.079 kg
5. 0.007 kg”.
|
| 6. | 295 | Chemicals & Allied
Products
Sl.No.A2206 | - The description of import item at Sl. No. 1
(without any change in quantity) shall be
amended to read as under:-
“Bleached Soft Wood Pulp”
- The quantity of import item Nos. at Sl. 4 &
5 shall be amended to read as under:-
“4. 0.103 kg
5. 0.009 kg”.
|
| 7. | 295 | Chemicals & Allied
Products
Sl.No.A2207 | - The description of import item at Sl. No. 1
(without any change in quantity) shall be
amended to read as under:-
“Bleached Soft Wood Pulp”
- The quantity of import item Nos. at Sl. 4 &
5 shall be amended to read as under:-
“4. 0.055 kg
5. 0.005 kg”.
|
| 8. | 295 -
296 | Chemicals & Allied
Products
Sl.No.A2208 | - The description of import item at Sl. No. 1
(without any change in quantity) shall be
amended to read as under:-
“Bleached Soft Wood Pulp”
- The quantity of import item Nos. at Sl. 4 &
5 shall be amended to read as under:-
“4. 0.071 kg
5. 0.006 kg”.
|
| 9. | 10 | Electronics Products
Sl. No. B-131
Introduced Vide Public
Notice No. 38 Dated:
01/11/2000 | The Note below this entry shall be deleted. |
| 10. | 601 | Engineering Product
Sl.No.C791 | The description of import item at Sl. No. 1
(with quantity) shall be amended to read as
under:-
“1. Stainless Steel Bars/ - 2.0 MT
Billets/Blooms”. |
| 11. | 813-815 | Leather Products
Sl.No.G-3 | After the Note No. 1 the following Note shall
be added below this norm:-
“Note2:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 2.95 sq.ft. if item at sl.no. 1(a) & (b) are not asked for, (ii) 2.65 sq.ft. per pair if item at sl.no. 1(a) is not asked for, (iii) 1.7 sq.ft. per pair if item at sl.no. 1(b) is not asked for and (iv) 1.4 sq.ft. per pair if item at sl.no.1(a) &1 (b) are not asked for”. |
| 12. | 816 | Leather Products
Sl.No.G-6 | The following Note No. 1 shall be added below
this norm:-
“Note1:The average consumption of finished leather for ladies hand gloves will be 2 sq.ft./pair and that of gents 2.5 sq.ft./pair.”. |
| 13. | 819-820 | Leather Products
Sl.No.G-8 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 8 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) & (b) is asked for.”. |
| 14. | 820-822 | Leather Products
Sl.No.G-9 | After the Note No. 1 the following Note shall be added below
this norm:-
“Note2:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 8 sq.ft. if item 1(a) & 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) & (b) are asked for”. |
| 15. | 822-823 | Leather Products
Sl.No.G-10 | After the Note No. 1 the following Note shall be added below
this norm:-
“Note2:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 10 sq.ft. if item 1(a) & 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) & (b) are asked for”. |
| 16. | 824 | Leather Products
Sl.No.G-11 | The following Note No. 1 shall be added below
this norm:-
“Note1:-Requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather products’, shall be worked out taking into account the area of Finished Leather as 1.5 Sq. ft/pair of Gents Leather Sandle Upper.”. |
| 17. | 824-825 | Leather Products
Sl.No.G-12 | After the Note No. 2 the following Note shall be
added below this norm:-
“Note3:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required is 1.5 sq.ft. per pair.”. |
| 18. | 825-826 | Leather Products
Sl.No.G-13 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) & (b) is asked for.”. |
| 19. | 826-828 | Leather Products
Sl.No.G-14 | After the Note No. 1 the following Note shall be
added below this norm:-
“Note2:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) & (b) is asked for.”. |
| 20. | 828-829 | Leather Products
Sl.No.G-15 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 10 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) & (b) is asked for.”. |
| 21. | 831-832 | Leather Products
Sl.No.G-22 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 3.65 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.25 sq.ft. if item 1(b) is not asked for, (iii) 2.15 sq.ft. if item 1(c) not asked for, and (iv) 1.75 sq.ft. if 1(a) & (c) are asked for.”. |
| 22. | 840-841 | Leather Products
Sl.No.G-29 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9 sq.ft. if item 1(a) is not asked for, (iii) 5.15 sq.ft. if item 1(b) is not asked for, and (iv) 4.75 sq.ft. if 1(a) & (b) are asked for.”. |
| 23. | 844 | Leather Products
Sl.No.G-35 | The following Note No. 1 shall be added below
this norm:-
“Note1:-For requirement of processing Chemicals as per Note 7 under the ‘General Notes for Leather and Leather Products’, finished leather required per glove is 1.2 sq.ft..”. |
| 24. | 943 | Plastics Product
Sl.No.H-410 | The description of export item shall be
amended to read as under:-
“PVC Lace Table Mats/Coasters/Doileys”. |
| 25. | 17 | Miscellaneous Product
Sl.No.K-126 Vide
Public Notice No. 19
Dated: 03/07/2000 | The norm covered by this entry shall be deleted
from Miscellaneous Product Group and this
entry has been shifted to Food Products Group
with prior import condition. |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2516 | Metoclopramide HCL
BP | 1 kg | 1. Meta Amino Phenol
2. Potassium Carbonate
3. N,N, Diethyl Ethylene Diamine
4. Dimethyl Formamide | 1.73 kg
3.21 kg
0.51 kg
0.49 kg |
| A 2517 | Triclosan Oral Grade
conforming to the
following
specifications:-
2,3,7,8 Tetra Chloro
Dibenzofuran<1ppt,
2,3,7,8 Tetra Chloro
Dibenzo-p-
dioxin<1ppt, 2,4,4’
Trichloro-2-Nitro
Diphenyl
Ether<0.01%, 2,4,4’
Trichloro-2-Amino
Diphenyl Ether<0.01%. | 1 kg | 1. 2,4 Dichloro Phenol
2. Perchloro Ethylene
3. Sodium Nitrite
4. Isopropyl Alcohol | 3.00 kg
10.00 kg
0.63 kg
5.00 kg |
| A2518 | Fenvalerate 20% EC | 1 kg | 1. Fenvalerate Tech. 90%
2. Solvent C-9 | 0.227 kg
0.688 kg |
| A2519 | Prepared adhesives
based on Plastics
(Two component
Laminating Adhesives)
- Adhesive (Polyu-rethane solution containing 60% resin content and 40% solvent)
- Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)
|
1 kg
1 kg | 1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl Ketone (relevant)
1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl Ketone (relevant) | 0.094 kg
0.270 kg
0.050 kg
0.204 kg
0.016 kg
0.035 kg
0.400 kg
0.012 kg
0.037 kg
0.032 kg
0.060 kg
0.002 kg
0.372 kg
0.500 kg |
| A2520 | Prepared adhesives
based on Plastics
(Two components
Laminating Adhesives)
- Adhesive (Polyu-rethane solution containing 66% resin content and 34% solvent)
- Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)
|
1 kg
1 kg | 1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl
Ketone (relevant)
1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl Ketone (relevant) | 0.103 kg
0.297 kg
0.055 kg
0.224 kg
0.018 kg
0.038 kg
0.340 kg
0.012 kg
0.037 kg
0.032 kg
0.060 kg
0.002 kg
0.372 kg
0.500 kg |
| A2521 | Prepared adhesives
based on Plastics
(Two components
Laminating Adhesives)
- Adhesive (Polyu-rethane solution containing 25% resin content and 75% solvent)
- Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)
|
1 kg
1 kg | 1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl Ketone (relevant)
1. Adipic Acid
2. Isophthalic Acid
3. Mono Ethylene Glycol
4. Diethylene Glycol
5. 1,6-Hexane Diol
6. Toluene Di-iso-cyanate
7. Ethyl acetate/ methyl Ethyl Ketone (relevant) | 0.039 kg
0.113 kg
0.021 kg
0.085 kg
0.007 kg
0.015 kg
0.750 kg
0.012 kg
0.037 kg
0.032 kg
0.060 kg
0.002 kg
0.372 kg
0.500 kg |
| A2522 | Paranitro benzyl
bromide, 99% min.
purity | 1 kg | 1. Paranitrotoluene
2. Liquid Bromine
3. Carbon Tetrachloride
4. Methanol | 1.300 kg
1.300 kg
0.900 kg
1 kg |
| A2523 | Nylon Tyre Yarn
(Nylon-6) | 1 MT | 1. Nylon Chips (Nylon-6)
2. Spin Finish Oil
3. Cuprous Iodide
4. Tetra Methyl Thiuram
Disulphide (TT) | 1.078 MT
32.25 kg
0.44 kg
0.107 kg |
| A2524 | Ethyl 2, Methyl 3, 4
Penta dianoate | 1 kg | 1. Tri-ethyl orth propionate
2. Propargyl Alcohol | 1.782 kg
0.549 kg |
| A2525 | PVC Shower curtains | 1 kg | 1. Relevant PVC Film | 1.06 kg/kg
content in the
export product |