Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/2003 PUBLIC NOTICE NO. 15(RE-03), DT. 07/07/2003

PUBLIC NOTICE NO. 15(RE-03), DT. 07/07/2003

Fixation and modification of input and output norms

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-3187, new entries at Sl. No. A-3188 to A-3211 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1887, new entries at Sl.No.C-1888 to C-1900 shall be added as per Annexure ”C” to this Public Notice.

5. This issues in public interest.

Sd/-
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE

(S. N. DUBEY)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

(F.No. 01/87/44/00001/AM-04/DES-VIII)

Annexure “A” to the
Public Notice No. 15
Dated: 07/07/2003

AMENDMENTS/CORRECTIONS

Sl.No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	165	Chemicals & Allied Products Sl.No.A1335	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1335	Ethyl acetate with minimum 90% purity	1 kg	1. Acetic Acid Glacial	0.716 kg
			OR 1(a) Methanol (Purity 99.93% Minimum)	0.392 kg
			1(b) Rhodium Tri Iodide Catalyst	0.00036 kg
			OR 1. Denatured Ethyl Alcohol	0.716 kg
			2. Denatured Ethyl Alcohol (95%)	0.517 kg
2.	168	Chemicals & Allied Products Sl.No.A1376	The description of import item at SL. No. 3, (with quantity) shall be amended to read as under:-
2.	168	Chemicals & Allied Products Sl.No.A1376	3. Dehydrogenation Catalyst for Pacol process (DeH-7, DeH-11, DeH-101 & DeH-201, DHC-2 & NDC-4 & the like)	0.00035 kg
3.	168	Chemicals & Allied Products Sl.No.A1377	The description of import item at SL. No. 3, (with quantity) shall be amended to read as under:-
3.	168	Chemicals & Allied Products Sl.No.A1377	3. Dehydrogenation Catalyst for Pacol process (DeH-7, DeH-11, DeH-101 & DeH-201, DHC-2 & NDC-4 & the like)	0.00035 kg
4.	182	Chemicals & Allied Products Sl.No.A1524	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1524	Triethylamine Min. Purity 98.5%	1 kg	1. Denatured Ethyl Alcohol (Purity not more than 98%)	1.421 kg
A1524	Triethylamine Min. Purity 98.5%	1 kg	2. Ammonia Anhydrous	0.175 kg
5.	6	Chemicals & Allied Products Sl.No.A1677 (Notified vide Public Notice No.03 Dated:31/03/2003)	The description of import item at Sl. No. 2, (without any change in quantity) shall be amended to read as under:- “Natural Rubber /PBR/ Relevant Grade of SBR except SBR 1900 Series i.e. HSR”
6.	240	Chemicals & Allied Products Sl.No.A1872	The following note below this entry shall be added:- “Note: In case of export of Copper Insulated Wire EDC Detonators, Tin Ingots shall not be allowed”
7.	248	Chemicals & Allied Products Sl.No.A1939	The norm covered by this entry shall be revised by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1939	Terpeneol	1 kg	1. Gum Turpentine Oil containing Alpha Pinene 82.5%	1.352 kg
A1939	Terpeneol	1 kg	OR 1. Alpha Pinene	1.04 kg
8.	343	Chemicals & Allied Products Sl.No.A2709	The norm covered by this entry shall be corrected as follows:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2709	PTFE Wax Compound containing 61+/-1% PTFE Wax and 33+/-1% Refined Linseed Oil	1 kg	1. PTFE Wax	0.625 kg
			2. Petroleum Hydro Carbon Solvent (Distillation Range 240-330 Degree Centigrade)	0.056 kg
			3. Refined Linseed Oil	0.339 kg
9.	38	Chemicals & Allied Products Sl.No.A3169 (Notified vide Public Notice No. 03 Dated:31/03/2003)	The description of import item at Sl. No. 2, (without any change in quantity) shall be amended to read as under:- “EPDM/ Chloroprene Rubber except SBR 1900 Series i.e. HSR”
10.	37-38	Chemicals & Allied Products Sl.No.A3170 (Amended vide Public Notice No.03 Dated:31/03/2003)	The description of export item shall be amended to read as under:- “Conveyor and Elevator Textile Belting (Heat/ Fire resistant) of Synthetic Rubber / Relevant Grade of SBR”
11.	376	GENERAL NOTES FOR ELECTRONICS PRODUCTS	The General note No.1 for Electronics Products before the Electronic Group (SIONs) shall be added:- “1. For Import of components, in respect of Export product (a) where norms have not been standardized and published and the applicant seeks to import only Components (without any raw material, consumables etc.) or (b) where SION do not provide import of Components or (c) where additional Components in addition to those allowed in norms are sought, the Components as an input may be allowed for import on net-to-net basis, without any wastage, by the Licensing Authority. Import of components sought as Spares shall be governed by the Policy for Spares. In such cases, the import of Components allowed shall be permitted with accountability clause and the type, technical specifications (including part No. if any), etc. of the Components sought for import should conform to those utilized in the manufacturing of the resultant product, which should be reflected in export documents (Shipping Bills) also. A condition to this effect shall be imposed on the licence.”
12.	386	Electronics Product Sl.No.B19	After the import item at Sl. No. 9, the following import items (with quantity) shall be added:-
			10. Tin Solder	Upto 1% of FOB value of export
			11. Spacer(Pastilha)	Net to net
			12. Cut Pieces of Polyester Foil (Tira Mylar)	Net to net
			OR Polyester Foil	0.110 kg ”
13.	401	Electronics Product Sl.No.B53	After the import item at Sl. No. 1, the following import item (without any change in quantity) shall be amended to read as under:- “2. Super pure aluminium wire of purity 99.9% or above OR 2. Super pure aluminium wire of purity 99.9% or above AND 2. Zinc Rod of purity 99.9% or above”
14.	477	Electronics Product Sl.No.B256	After the import item at Sl. No. 10, the following import items (with quantity) shall be added:-
			“11. EMI Shilding Gasket OR Soft Shilding Gasket	Net to net
			12. Aluminium Die Cast Block	Net to net
			13. Hinge/Latch	Net to net
15.	479	Engineering Product Sl.No.C2	The description of import item at Sl. No. 1(a) (without any change in quantity) shall be amended to read as under:- “1(a) Aluminium Scrap/ Ingots/ T-bars, Sows”
16.	509-510	Engineering Product Sl.No.C189	The description of export item shall be amended to read as under:- “Electrical Fan with Table Stand/ Wall Bracket”
17.	558	Engineering Product Sl.No.C375	The note No. 2, below this entry shall be substituted by the following :- “Note : If the export product is painted / coated in addition relevant Paint/ coating Powder may be allowed to the extent of 4% of the FOB value”
18.	559	Engineering Product Sl.No.C380	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C380	Iron Casting (Rough), not elsewhere specified	1 MT	1. Major Input comprising of Pig Iron/ CI Scrap/Steel Melting Scrap	1100 kg
			2. Low Ash Met. Cocke (Ash: Below 15%)	110 kg
			3. Ferro Alloy comprising of FeSi & FeMn:	5 kg
			4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint	CIF value of all these items taken together restricted to 1% of FOB value of exports
			5. Packing material (MS Round bars/ Flats/Strips for crating and stuffing)	As per packing Policy
Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity.
19.	560	Engineering Product Sl.No.C383	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C383	Manhole Cover	1 MT	1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap	1100 kg
			2. Low Ash Met. Cocke (Ash: Below 15%)	110 kg
			3. Ferro Alloy comprising of FeSi & FeMn:	5 kg
			4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint	CIF value of all these items taken together restricted to 1% of FOB value of exports
			5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing)	As per packing Policy
Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity.
20.	562	Engineering Product Sl.No.C392	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C392	Sanitary Castings	1 MT	1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap	1100 kg
			2. Low Ash Met. Cocke (Ash: Below 15%)	110 kg
			3. Ferro Alloy comprising of FeSi & FeMn:	5 kg
			4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint	CIF value of all these items taken together restricted to 1% of FOB value of exports
			5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing)	As per packing Policy
Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity.
21.	592	Engineering Product Sl.No.C491	The description of export item shall be amended to read as under:- “High Chrome Castings for Cement Grinding Mills (Composition: Cr.30-32%, Moly-2.5-3%, Si 1.5-2.5% and C-1.5-2.5%, Balance-Iron)”
22.	599	Engineering Product Sl.No.C508	The description of import item at Sl. No. 1(b) & 1(c), (without any change in quantity) shall be amended to read as under:- “1(b).Energy Sources /Fuels (Natural gas/LNG, NGL (Condensate/ gaseous), Naptha, HSD Oil, Furnace Oil) (Only for plants having captive power plant with facilities installed for use of specific energy sources/Fuel)” “1(c).Energy Sources / Fuels (natural gas/LNG, NGL (condensate/ gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil) (for re-heating furnace in rolling mills, ladle heating and tundish pre-heating).”
23.	623	Engineering Product Sl.No.C570	The note below this entry shall be substituted by the following :- “Note : If the export product is painted / coated in addition relevant Paint/ coating Powder may be allowed to the extent of 4% of the FOB value”
24.	626	Engineering Product Sl.No.C597	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C597	CI Pipes and Fittings	1 MT	1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap	1100 kg
			2. Low Ash Met. Cocke (Ash: Below 15%)	110 kg
			3. Ferro Alloy comprising of FeSi & FeMn:	5 kg
			4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint	CIF value of all these items taken together restricted to 1% of FOB value of exports
			5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing)	As per packing Policy
Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity.
25.	635	Engineering Product Sl.No.C671	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C671	High Chromium Grinding Media Balls for Cement Grinding Mills (Composition: Cr.-16-17%, Mo-0.6-0.7%, Si-0.6-0.7%, C-1.5-2.5%, Fe-Balance)	1 MT	1. Mild Steel Scrap	0.90 MT
			2. HC Ferro Chrome	292 kg
			3. Ferro Moly (Mo-75%)	10 kg
			4. Ferro Silicon (Silicon 75%)	10 kg
26.	641	Engineering Product Sl.No.C707	The description of import item at Sl. No. 2 (without any change in quantity) shall be substituted by the following:- “2. Zinc OR Paint OR Coating Powder”
27.	646	Engineering Product Sl.No.C734	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C734(a)	Needle Rollers upto 4 mm Dia	1 kg	1. Steel wire to SAE 52100/100 CRG/ SUJ2/equivalent	1.45 kg
C734(a)	Needle Rollers upto 4 mm Dia	1 kg	2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda	Upto 5% of FOB value of exports
C734(b)	Needle Rollers above 4 mm to 8 mm Dia	1 kg	1. Steel wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent	1.28 kg
C734(b)	Needle Rollers above 4 mm to 8 mm Dia	1 kg	2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda	Upto 5% of FOB value of exports
C734(c)	Needle Rollers above 8 mm Dia	1 kg	1. Steel wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent	1.21 kg
C734(c)	Needle Rollers above 8 mm Dia	1 kg	2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda	Upto 5% of FOB value of exports
28.	654	Engineering Product Sl.No.C810	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C810	Snap Fastners consisting of Stud & Socket	1 kg	1. Brass Strips	1.15 kg/kg content in export product
C810	Snap Fastners consisting of Stud & Socket	1 kg	2. Phosphor Bronze Wire	1.04 kg/kg content in export product
29.	657	Engineering Product Sl.No.C831	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “ Seamless Stainless Steel Tubes/Pipes (Hot finished) (OD not less than 42 mm)
30.	733	Engineering Product Sl.No.C1125	In the description of export item the Word “SAE797” shall be substituted by the following:- “SAE792”
31.	756	Engineering Product Sl.No.C1292	The description of export item shall be amended to read as under:- “Carbon Steel Submerged arc welded Pipes with 3 Layer Polyethylene coating of 3.5 mm thickness and having coating weight of 4.20 kgs.+/-5% per Sq.Mtr.”
32.	781	Engineering Product Sl.No.C1385	The description of export item shall be amended to read as under:- “Plates for Lead Acid Storage Battery”
33.	8	Engineering Product Sl.No.C1392 (amended vide Public Notice No. 27 Dated:01/08/2002)	1. After the import item at Sl. No. 4(d) the following imports items (with quantity) shall be added:-
			“OR 4(a) PVC Resin	0.63 kg
			4(b) Plasticizer	0.315 kg
			4(c) Filler Material (Calcium Carbonate/ Alumina/Kolin	0.105 kg
			2. After note No. 1 below this entry, the following foot note shall be added:- Note: 2.In case PVC Stabilizer/ Tin Stabilizer is also opted for import, it can be permitted upto 3% of compound and equivalent reduction in PVC resin.
34.	795	Engineering Product Sl.No.C1469	The description of export item shall be amended to read as under:- “Cistern Side Inlet valve, Cistern Bottom Inlet Valve, Cistern Outflow Valve”
35.	799	Engineering Product Sl.No.C1492	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “Hot Rolled Silicon Electrical Steel Wide Coils of relevant Grade containing 2.5% - 3.5% Silicon”
36.	803-804	Engineering Product Sl.No.C1504	1. The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:-
			“1. Hot Rolled Silicon Electrical Steel wide Coils of relevant grade containing 0.60% to3.2% Silicon with varying quantity of ALuminium”	1125 kg
			2. After import item at Sl. No. 5, the following additional import item (with quantity) shall be added:-
			6. Cold Rolling Mill Rolls	1.00 kg
			7. Mineral Based Rolling Oil	0.35 kg”
			3. The note below this entry shall be added:- Note : Import item No. 2 will not be allowed if export product is CRNO in Semi processed state.
37.	828	Engineering Product Sl.No.C1577	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “hardened and Tempered Carbon Steel Strips (In Coils)/ Stainless Steel (Martensitic Grade) Strips (in Coils)”
38.	829	Engineering Product Sl.No.C1583	The following Note below this entry shall be added:- “Note: If the export product is galvanized zinc may be allowed as 4% of the weight of parts to be galvanised”
39.	868	Engineering Product Sl.No.C1733	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “Cold Rolled Decarburized, Magnesium Oxide (MgO) coated, Silicon Electrical Alloy Steel Strips/ Wide Coils of relevant grade containing 2.5% to 3.5% Silicon”
40.	19	Engineering Product Sl.No.C1799 (amended vide Public Notice No. 37 Dated:03.10.2002)	The description of export product shall be amended to read as under:- “Filter Cartridge: Cylindrical Air Intake Filter / Pulse Jet Air Filter/ Conical Filter Cartridge/ Cylindrical Filter Cartridge”
41.	22	Engineering Product Sl.No.C1809 (amended Vide Public Notice No.37 Dated: 03.10.2002)	The description of import item at Sl. No. 5(a), (without any change in quantity) shall be amended to read as under:- “5(a). Berlaclear CT Laquer OR Albrilac HB (for Electrophoretic Laquer)/ Polyester Powder for coating”
42.	42	Engineering Product Sl.No.C1815 (amended Vide Public Notice No. 44 Dated: 18.10.2002)	The description of export item shall be amended to read as under:- “Wax Impregnated Carbon Electrodes for Dry Cell Battery”
43.	19	Engineering Product Sl.No.C1834 (amended Vide Public Notice No.52 Dated: 05/12/2002)	The description of import items at Sl. No. 1, 2, 6 & 7shall be amended to read as under:- “1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound”
44.	20	Engineering Product Sl.No.C1835 (amended Vide Public Notice No.52 Dated: 05/12/2002)	The description of import items at Sl. No.1, 2, 6 & 7 shall be amended to read as under:- “1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound”
45.	20	Engineering Product Sl.No.C1836 (amended Vide Public Notice No.52 Dated: 05/12/2002)	The description of import items at Sl. No. 1, 2, 6 & 7 shall be amended to read as under:- “1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound”
46.	20	Engineering Product Sl.No.C1837 (amended Vide Public Notice No.52 Dated: 05/12/2002)	The description of import item at Sl. No. 9 (without any change in quantity) shall be amended to read as under:- “Bearing of relevant Type”
47.	24	Engineering Product Sl.No.C1868 (amended Vide Public Notice No.66 Dated: 04/03/2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1868	Electric Storage Water Heater	1 No.	1. Polypropylene Granules	1.05 kg/kg content in export product
			2. Heating Element	1 No.
			3. Polyol Resin	0.408 kg/kg of PU Foam contained in export product
			4. Isocyanate Hardner	0.612 kg/kg of PU Foam contained in export product
			5. Thermostate	1 No.
			6. Safety Valve	1 No.
			7. M.S. Sheet / Wide Coil/ Strips of relevant grade	1.05 kg/kg content in export product
			8. Nut & Bolt	Net to net
			9. Copper Sheet	1.02 kg/kg content in export product
			10. S.S. Sheet/ Wide Coil/ Strips of relevant grade	1.18 kg/kg content in export product
48.	44	Engineering Product Sl.No.C1880 (Notified Vide Public Notice No. 03 Dated: 31.03.2003)	After import item at Sl. No. 4 the following import items (with quantity) shall be added:-
			“5. Fiber Glass	1.05 kg/kg content in the export product
			6. Nylon Resin	1.05 kg/kg content in the export product”
49.	891	Engineering ProductTable No.6	In the Engineering Table No. 6 after Sl. No. 69 the following export items & imports (with quantities) shall be added:-

Sl. No.	Export Item	Import Item (in kgs)
Sl. No.	Export Item	1a	1b	2a	2b
70	1.5 SQ MM x 1 Core	13.6	4.2	6.5	-
71	0.5 SQ MM x 2 Cores	9.1	2.8	36	-

50.	10	Plastic Products Sl.No.H-461 (amended vide Public Notice No.61 Dated:03/02/2003)	The word “OR” mentioned between export product (A) and (B) against SION at SL. No. H-461 shall be deleted.
51.	1117	Textile Product Sl.No.J351	The quantity of import item at Sl. No. 1 shall be corrected to read as under:- “2.00 Sq. Mtr. Instead of 2.40 Sq. Mtr.”
52.	53	Food Products Sl.No.K-159 (Notified vide Public Notice No.03 Dated: 31.03.2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
K-159	Scented Candles assorted sizes, shapes and colours	1 kg	1. Paraffin Wax/ Microcrystalline Wax (Microcrystalline Wax if used should not be allowed more than 2.5% of he requirement of Wax)	0.970 kg
			2. Fragrances	0.03 kg (Subject to 20% FOB value)
			3. Wicks / Wicking	0.002 kg
			4. Colours / Dyes	0.005 kg
			5. Ultraviolet Stabiliser (UV sorb.)	0.006 kg
			6. Vybar Chemicals (Vybar 103)	0.011 kg
Note : The above SIONs shall be subject to actual user condition and the inputs allowed under the SIONs shall be relevant to the manufacture of scented candles.

Annexure “B” to the
Public Notice No. 15
Dated: 07/07/2003

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3188	Bisphenol Amino Ester {propane 2,2, Diphenyl-4’,4” Bis (2 Amino Phenyl-sulfonyloxy)}	1 kg	1. Bis-phenol	0.585 kg
			2. 2-Nitro Benzene Sulfonyl Chloride (95% Min.)	1.122 kg
			3. Ortho Dichloro Benzene	1.100 kg
A3189	1,3-Dichloroacetone	1 kg	1. Epichlorohydrin	1.31 kg
A3189	1,3-Dichloroacetone	1 kg	2. Sodium Dichromate	2.56 kg
A3190	5,5-Dimethyl Hydantoin	1 kg	1. Ammonium Bicarbonate	0.830 kg
			2. Acetone	0.609 kg
			3. Sodium Cyanide	0.515 kg
A3191	N-N’-Bis (1,4 Dimethyl Pentyl) Para Phenylene Diamine	1 kg	1. Methyl Isoamyl Ketone	0.838 kg
			2. Para Nitro Aniline	0.455 kg
			3. Platinum Catalyst (Platinium content 3% on carbon)	0.27 gm
A3192	Poly Isocyanate (Phenol Blocked Polyisocyanate)Isocyanate content: 14+/-1% Colour & appearance: Yellow Light Brown Solid Melting Point 80º - 95º	1 kg	1. Toluene-di-Isocyanate	0.590 kg
A3192		1 kg	2. Phenol	0.405 kg
A3193	Potassium Chlorate	1 kg	1. Potassium Chloride	0.640 kg
A3194	Potassium Superoxide	1 kg	1. Sodium Metal	1.321 kg
A3194	Potassium Superoxide	1 kg	2. Potassium Chloride	8.194 kg
A3195	Sodium Potassium Alloy	1 kg	1. Sodium Metal	1.524 kg
A3195	Sodium Potassium Alloy	1 kg	2. Potassium Chloride	7.904 kg
A3196	2 Chloro Ethyl Amine Hydrochloride (70% Solution)	1 kg	1. Mono Ethanol Amine	0.410 kg
A3197	Di Allyl Phthalate	1 kg	1. Phthalic Anhydride	0.718 kg
A3197	Di Allyl Phthalate	1 kg	2. Allyl Alcohol	0.698 kg
A3198	Flame Retardant High Impact Polystyrene (With MFI<6)	1 MT	1. Styrene Monomer	0.770 MT
			2. Polybutadiene Rubber	0.071 MT
			3. Mineral Oil	0.018 MT
			4. Flame Retardant Additive	0.140 MT
			5. Antimony Trioxide	0.046 MT
			6. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch	0.020 MT
A3199	Flame Retardant High Impact Polystyrene (With MFI>6)	1 MT	1. Styrene Monomer	0.714 MT
			2. Polybutadiene Rubber	0.066 MT
			3. Mineral Oil	0.017 MT
			4. Styrene Butadiene Copolymer	0.082 MT
			5. Flame Retardant Additive	0.123 MT
			6. Antimony Trioxide	0.041 MT
			7. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch	0.020 MT
A3200	Toughened Polystyrene (S.B. Copolymer)	1 MT	1. Styrene Monomer	0.371 MT
			2. Mineral Oil	0.006 MT
			3. Styrene Butadiene Copolymer	0.663 MT
A3201	Coloured High Impact Polystyrene	1 MT	1. Styrene Monomer	0.942 MT
			2. Mineral Oil	0.087 MT
			3. Styrene Butadiene Copolymer	0.022 MT
			4. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch	0.025 MT
A3202	Polyester Polyol (Expol PH 350)	1 kg	1. Phthalic Anhydride	0.3735 kg
			2. Di-Ethylene Glycol	0.5515 kg
			3. Pentaerythintol	0.031 kg
			4. Fascat 4100 (Catalyst)	0.00026 kg
			5. 12 Hydroxy Stearic Acid	0.0640 kg
A3203	Polyester Polyol (Expol PH 270)	1 kg	1. Phthalic Anhydride	0.380 kg
			2. Di-Ethylene Glycol	0.52 kg
			3. Adipic Acid	0.0803 kg
			4. Penta-Erythritol	0.0412 kg
			5. Fascat 4100 (Catalyst)	0.00025 kg
A3204	Compreg (Compressed and Impregnated) Sheets/ Components thereof	1 CBM	1. Relevant Wood Log	3.07 CBM
			OR Commercial Venner	1.53 CBM
			2. Phenol	52 kgs
			3. Formaldehyde	61.85 kgs
			4. Furnace Oil	81.2 Liters
A3205	Octadecyl-3-(3’,5-di-tert-butyl-4-hydroxy Phenyl Propionate	1 kg	1. 2,6 Di Tertiary Butyl Phenol	0.496 kg
			2. Methyl Acrylate	0.227 kg
			3. Stearyl Alcohol	0.525 kg
			4. Methanol	0.729 kg
			5. Di-butyl Tin Oxide	0.0021 kg
A3206	Penta-Erythritol Tetrakis (3, (3,5-ditertiary-butyl-4-hydroxy Phenyl Propionate	1 kg	1. 2,6 Ditertiary Butyl Phenol	1.073 kg
			2. Methyl Acrylate	0.448 kg
			3. Penta-erythritol	0.145 kg
A3207	Monomethyl Amine 40% Solution	1 kg	1. Methanol	0.434 kg
			2. Ammonia	0.188 kg
			3. Alumina Silica Catalyst	0.180 gram
A3208	Limotrigine	1 kg	1. 2, 3, Dichloro Benzoyl Chloride	2.05 kg
A3208	Limotrigine	1 kg	2. Amino Guanidine Bicarbonate	1.60 kg
A3209	Ornidazole	1 kg	1. Glyoxal 40%	2.50 kg
			2. Formic Acid 99%	4.09 kg
			3. Epichlorohydrin	5.33 kg
			4. Methyl Iso Butyl Ketone	1.55 kg
A3210	Diclofenac resinate	1 kg	1. Aniline	0.30 kg
			2. Perchloro Ethylene	2.30 kg
			3. Potassium Carbonate	0.63 kg
			4. Phenol	1.35 kg
			5. Sodium Methoxide	0.20 kg
			6. Caustic Potash	0.10 kg
			7. Cholestyramine	0.60 kg
			8. Iso Propyl Alcohol	0.88 kg
A3211	Ticlopidine Hcl	1 kg	1. Thienyl 2-Ethanol OR Thiophene-2- Ethanol	0.72 kg
			2. Ortho Chloro Benzylamine	0.80 kg
			3. Para Formaldehyde	0.443 kg
			4. Isopropyl Alcohol	0.85 kg
			5. Pyridine	0.33 kg
			6. Methylene Chloride	2.17 kg

Annexure “C” to the
Public Notice No. 15
Dated: 07/07/2003

ENGINEERING PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1888	Ball Pen Tips of Nickel Silver Wire	1.0 million numbers (176.4 kg)	1. Nickel Silver Wire Dia 2.3 mm of relevant grade	1.9 kg/kg content in the export product
C1888	Ball Pen Tips of Nickel Silver Wire	1.0 million numbers (176.4 kg)	2. Tungsten Carbide Balls	1.02 million Nos.
C1889	Carbon Electrode	1 kg	1. Copper Cathode	1.07 kg/.kg content in export product
C1890	Copper Bus Bars	1 kg	1. Copper Cathode / Copper Wire Bar	1.05 kg
C1890	Copper Bus Bars	1 kg	OR Copper Scrap	1.07 kg
C1891	Aluminium Radiator	1 kg	1. Aluminium Tube	1.02 kg./kg. content in export product
			2. Aluminium Foil	1.02 kg./kg. content in export product
			3. Aluminium Sheet/ Strips	1.03 kg./kg. content in export product
			4. Brazing Flux	5% of FOB value of export
			5. Plastic tanks (for Top & Bottom of Radiator)	Net to net
C1892	Welded Steel Link Chain	1 MT	1. Copper Electrode	2 kg
C1892	Welded Steel Link Chain	1 MT	2. Bandshaw Blade	2 Mtr.
C1893	Mica Heating Element (electrical heating element)	1 kg	1. Silicon bonded micanite/ Heater Plate- Electrical insulating material	1.05 kg./kg. content in export product
			2. Heating Tape/Wire- Generate Heat by current	1.02 kg./kg. content in export product
			3. Aluminized Steel Sheet-resistance to corrosion under high heat	1.05 kg./kg. content in export product
			4. Receptacle / Terminal connection between cable and end point	Net to net
C1894	Agricultural Tractor	1 No.	A. Assembly / Sub-Assembly/ Components: 1. Air Compressor 2. Air/Fuel/Oil Filter 3. Automotive battery 4. Bearing (All Types other than Engine Bearings) such as ball bearings and Taper/Cylindrical / Needle Roller Bearings 5. Brake Assembly (Primary / Secondary) or components thereof 6. Cab Assembly or Components thereof 7. Clutch Assembly (including Split / Torgue Type) or components thereof 8. Coupler 9. Electrical Equipment such as Alternator, Starter Motor, Dynamo, Regulator, Horns and Circuit Breakers 10. Electrical Switches/ Auto Lamps 11. IC Engine (Complete) or Components thereof 12. V Belt and Pulley 13. Fuel Tank 14. Front Axle Support 15. Front Axle (2 Wheel Drive/ 4 Wheel Drive) including Sleeves, Spline shaft 16. Hydraulic Pump (including Auxiliary Hydraulic Pump) 17. Hoses 18. Hydraulic Cylinder / Hydraulic Valves 19. Hardware items such as Nuts, Bolts, Pins, Washers, Spacers, Shims, Drain Plugs 20. Hood / Bonnet 21. Instrument Cluster 22. Oil Seals/ O-Rings 23. Oil Pump 24. Power Steering Unit or Components thereof 25. Power Lift Complete 26. radiator 27. Safety Equipment a) Mechanical (Rops, Safety Belt) b) Electrical (Safety Neutral Switches Safety Belt Indicator Switches) 28. Seat Assembly 29. Silencer 30. Tyre / Tubes 31. Wheel Rims 32. Transmission Complete (constant mesh/ synchro/ shuttle / creeper) or components thereof 33. Three Point Linkages (Front / Rear) 34. Turbo-Charger 35. Water Pump or components thereof 36. Wiring Harness including Plug Socket	Net to Net
			B. Raw Material: 1. Pig Iron	1.1 kg./ kg. content in export product
			2. Alloy Steel Rods / Rounds/ Billets	1.1 kg./ kg. content in export product
			3. Hot Rolled / Cold Rolled (Sheets / Coils)	1.1 kg./ kg. content in export product
			4. Terne Coated Steel Sheets	1.05 kg. / kg. content in export product
			5. Plastic / Nylon Formulation in granules / Powder form	1.05 kg. / kg. content in export product
Note: Net content of raw material as per SION shall be of the component manufactured out of this raw material and shall not include components allowed for import.
C1895	24” (600 mm) complete ceiling fan with Metal Blades	1 No.	1. Super Enamelled Copper Wire / Copper Wire Rod of 8 mm electrolytic Grade	0.214 kg
			2. CRNGO Sheet / Coil 0.5 mm thickness	1.381 kg
			3. Aluminium Alloy	0.776 kg
			4. Ball Bearing Oper Closed 6201 & 6202 or equipment	2 Nos.
			5. M. S. Sheet	0.341 kg
			6. Aluminium Sheet / CRCA Sheet (for Blades of fans)	0.257 kg
			7. Kraft paper	As per packing policy
C1896	Copper Bowls with Lids	1 No.	1. Copper Sheet	1.05 kg./kg. content in export product
C1896	Copper Bowls with Lids	1 No.	2. Copper Pipe of relevant Dimensions	1.01 kg. / kg. content in export product
C1897	Brazed Wheel Chair Components made out of Steel Tube / Section / profile e.g. Frames/ Cross Bar/ Leg Rest/ Arm rest	1 kg	1. Steel Tube / Section / Profile	0.978 kg
			2. Brazing Wire	0.05 kg
			3. Brazing Flux	0.012 kg
C1898	Valve for LPG Cylinder made of Brass Model NO. M 014 S R	1 No.	1. Brass Rod (Round)	1.23 kg/kg content in the export product
C1899	E.O.T. Crane	1 No.	1. Relevant Welding Wires	2% of Steel to be Welded
			2. Bearing Taper Roller/ Spherical Roller Ball Bearing	Net to net
			3. POG 10 D 1024 + FSL Digital Tacho Overspeed Switch combination	Net to net
			4. Twist knot wire wheel Brushes 5. DC Grinding Wheel	2% of FOB value
C1900	Fabricated Articles made of SS not elsewhere Specified	1 kg	1. SS Sheet/ wide Coil/ Strips of relevant grade	1.05 kg

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password