Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl. No.A-3332, new entries at Sl. No. A-3333 to A-3378 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1967, new entry at Sl.No.C-1968 to C-1975 shall be added as per Annexure “C” to this Public Notice.
After the existing entry at Sl.No.E-114, new entries at Sl.No. E-115 to E-117 shall be added as per Annexure “D” to this Public Notice.
After the existing entry at Sl.No.J-359, new entry at Sl.No.J-360 to J-361 shall be added as per Annexure “E” to this Public Notice.
5. This issues in public interest.
( GOPAL K. PILLAI )
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
| Sl.No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 39 | Chemical & Allied Product Sl.No.A177 | The description of import item at Sl. No. 5(d), (without any change in quantity) shall be amended to read as under:-“Methyl Aceto Acetate” |
| 2. | 3 | Chemical & Allied Product Sl.No.A366 (amended vide Public Notice No. 35 Dated:05/12/2003) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-“Iodine/Iodine Crude other than Pharma Grade” |
| 3. | 84-85 | Chemical & Allied Product Sl.No.A554 | The description of export item shall be amended to read as under:- “Carbazole Dioxazine Violet Pigment Crude (Pigment Violet 23) (C.I. No. 51319)” |
| 4. | 87 | Chemical & Allied Product Sl.No.A570 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A570 | Copper Phthalo Cyanine Green | 1 kg | 1. Copper Phthalo Cyanine Blue Crude | 0.537 kg. |
2. Aluminium Ingots
OR | 0.540 kg. |
| Aluminium Chloride Anhydrous | 2.016 kg |
| 3. Caustic Soda Lye on 100% basis | 0.760 kg. |
| 4. Cupric Chloride anhydrous | 0.063 kg. |
| 5. | 3 | Chemical & Allied Product Sl.No.A661 (amended vide Public Notice No. 23 Dated:10/09/2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A661 | Fast Red B Base (4-Nitro ortho Anisidine) | 1 kg | 1. Ortho anisidine | 1.190 kg. |
| 2. Acetic Anhydride | 0.977 kg. |
| 3. Caustic Soda Flakes | 1.005 kg. |
| 6. | 148 | Chemical & Allied Product Sl.No.A1096 | In the import item at Sl. No. 1, the following (without any change in quantity) shall be amended to read as under:-
“OR Cobalt Metal purity 99.3% Forms: Broken cathodes/ Briquttes/ Ingot/ Granules/ Powder ” |
| 7. | 151 | Chemical & Allied Product Sl.No.A1127 | The description of import item at Sl. No. 2, (without any change in quantity) shall be amended to read as under:-
“Iodine/Iodine Crude other than Pharma Grade” |
| 8. | 153 | Chemical & Allied Product Sl.No.A1166 | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
| 9. | 153 | Chemical & Allied Product Sl.No.A1167 | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
| 10. | 3 | Chemical & Allied Product Sl.No.A1170 (amended vide Public Notice No. 55 Dated:03/03/2004) | The foot note below this entry shall be amended to read as under:-
“Note: CIF value of item (5) & (6) together shall not exceed 10% of FOB value” |
| 11. | 155 | Chemical & Allied Product Sl.No.A1188 | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
| 12. | 168 | Chemical & Allied Product Sl.No.A1376 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1376 | Linear Alkyl Benzene (For HF Process)
OR | 1 kg | 1. Kerosene Oil | 1.000 kg |
| 2. Benzene | 0.400 kg |
| 3. Dehydrogenation catalyst for Pacoi Process (DeH-7, DEH-11, DeH-101 & DeH 201, DeH-2 & NDC-4 & the like | 0.00035 kg |
| 4. HF Acid | 0.002 kg |
| 5. KOH | 0.002 kg |
| 6. Normal Pentane | 0.007 kg |
| 7. Iso-Octane | 0.0001 kg |
| 8. Fuel Oil/ LSWR | 1.000 kg |
| 9. Heat transfer Oil | 0.0045 kg |
| Linear Alkyl Benzene (For Detal Process) | 1 kg | 1. Kerosene Oil | 1.000 kg |
| 2. Benzene | 0.400 kg |
| 3. Dehydrogenation catalyst for Pacoi Process (DeH-7, DEH-11, DeH-101 & DeH 201, DeH-2 & NDC-4 & the like | 0.00035 kg |
| 4. Detal Catalyst | 0.00081 kg |
| 5. PEP Adsorbent | 0.00017 kg |
| 6. Define Catalyst | 0.00004 kg |
| 7. Normal Pentane | 0.005 kg |
| 8. Iso Octane | 0.0001 kg |
| 9. Fuel Oil/ LSWR | 1.000 kg |
| 10. Heat Transfer Oil | 0.0045 kg |
| 13. | 3 | Chemical & Allied Product Sl.No.A1381 (amended vide Public Notice No. 55 Dated:03/03/2004) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Crude Fumaric Acid (Purity 90%)” |
| 14. | 183 | Chemical & Allied Product Sl.No.A1534 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1534 | Zinc salt of 2 mercapto Benzothiazole (Active content 93%) | 1 kg | 1. 2-Mercapto Benzothiazole (95%)
OR | 0.764 kg. |
| 1(i) Aniline | 0.527 kg. |
| 1(ii) Carbon Disulphide | 0.51 kg. |
| 1(iii) Sulphur | 0.203 kg. |
| 2. Zinc Chloride 40% | 0.897 kg. |
| 3. Ammonia | 0.032 kg. |
| 4. Caustic Soda Lye | 0.235 kg. |
| 15. | 207 - 208 | Chemical & Allied Product Sl.No.A1687 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1687 | General Purpose Metal Fitted/ Metal Bonded/ Metal Un-bonded Rubber parts (Moulded/ Extruded) including Engine Mounting & Automotive Parts | 1 kg | 1. Mild steel sheets/ coil/ plates/ rounds/ strips | 1.30 Kg./Kg. content in the export product. |
2. Relevant Rubber compound consisting of the following:
2(a) Relevant natural Rubber/ Relevant Synthetic Rubber namely, SBR/PBR of relevant grade except SBR 1900 series i.e. HSR, depending upon the description of the product to be exported. | 0.63 Kg/Kg. content of rubber compound in the export product |
| 2(b) Carbon Black | 0.126Kg/Kg. content of rubber compound in the export product |
| 2(c) Zinc Oxide | 0.0315 Kg./ Kg. content of rubber compound in the export product. |
| 2(d) Rubber Chemical viz. Antioxidants/ accelerators /Retarder and Pepitizer. | 0.012 Kg./ Kg. content of rubber compound in the export product. |
| 2(e) Misc. Chemicals viz. Stearic acid, insoluble sulphur, silicon oil | 0.042 Kg./ Kg. content of rubber compound in the export product. |
| 3. Bonding agent for metal bonded parts | 0.01 Kg/Kg. of steel in the export product. |
| 16. | 208 | Chemical & Allied Product Sl.No.A1688 | 1. The description of export product shall be amended to read as under:-
“General purpose Moulded goods of Synthetic Rubber only SBR/PBR”
2. The description of import item at Sl. No. 1, (with any change in quantity) shall be amended to read as under:-
“1. Relevant SBR/PBR of relevant grade except SBR 1900 series i.e. HSR”. |
| 17. | 211 | Chemical & Allied Product Sl.No.A1704 | 1. The description of export product shall be amended to read as under:-
“General purpose Relevant Natural Rubber/ Synthetic Rubber based Rubber compounded Sheets/ Rings/Gaskets”
2. The description of import item at Sl. No. 1, (with any change in quantity) shall be amended to read as under:-
“1.Natural Rubber/ Relevant Rubber namely, SBR/PBR of Relevant grade except SBR 1900 series i.e. HSR” |
| 18. | 211 - 212 | Chemical & Allied Product Sl.No.A1707 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1707 | General Purpose Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber | 0.382Kg. |
| 2. Synthetic Rubber namely, SBR/PBR of relevant grade except SBR 1900 series i.e. HSR. | 0.130Kg. |
| 3. Carbon Black | 0.358Kg. |
| 4. Zinc Oxide | 0.026Kg. |
| 5. Rubber Chemicals (Accelerator/Antioxidant/ Peptizers/ Retarders) | 0.020Kg. |
| 6. Miscellaneous Chemicals (Microcrystalline Wax) | 0.075Kg. |
| 19. | 240 | Chemical & Allied Product Sl.No.A1872 | 1. The description of export product shall be amended to read as under:-
“Tinned Copper Insulated Wire EDC Detonators Or Copper Insulated Wire EDC Detonator”
2. The following foot note below this entry shall be added:-
“Note: In case of export of Copper Insulated Wire, EDC Detonators Tin Ingots should not be allowed and instead the quantity of Copper Wire Rod may be allowed 6.1 kg. instead of 5.73 kg.” |
| 20. | 249 | Chemical & Allied Product Sl.No.A1946 | After the import item at Sl. No. 2, the following input item (with quantity) shall be added:-
“3. HSD/LDO - 0.510 litre/kg” |
| 21. | 271 | Chemical & Allied Product Sl.No.A2118 | After the description of import item at Sl. No. 21, the following additional import items (with quantity) shall be added:- |
| “22. Phosphorous Pentachloride | 0.99 kg |
| 23. Dimethyl Aniline | 0.66 kg |
| 24. Para Toluene Sulphonyl Chloride | 1.15 kg |
| 25. Acetic Acid | 1.59 kg |
| 26. Ethyl Acetate | 5.13 kg” |
| 22. | 271 - 272 | Chemical & Allied Product Sl.No.A2119 | After the description of import item at Sl. No. 17, the following additional import items (with quantity) shall be added:- |
| “18. Phosphorous Pentachloride | 1.30 kg |
| 19. Dimethyl Aniline | 0.794 kg |
| 20. Para Toluene Sulphonyl Chloride | 1.515 kg |
| 21. Acetic Acid | 2.09 kg |
| 22. Ethyl Acetate | 6.75 kg” |
| 23. | 283 | Chemical & Allied Product Sl.No.A2209 | The norm covered by this entry shall be deleted. |
| 24. | 307 | Chemical & Allied Product Sl.No.A2389 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2389 | U.V. Curable Printing Ink-Yellow, Flush Route (Pigment 10.2% +/- 1%) | 1 kg | 1. U.V. Flush Colour-Yellow (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate) | 0.351 kg |
2. Polyester Acrylate
OR | 0.412 kg |
2. Acylic Acrylate
OR | 0.412 kg |
2. Urethene Acrylate
OR | 0.412 kg |
2. Epoxy Acrylate (75% Resin content in the Relevant Mopnomer)
OR | 0.412 kg |
2. Raw Materials for Epoxy Acrylate (75% resin content in the Monomer)
2 A Epoxy Resin | 0.22248 kg |
| 2 B Acrylic Acid | 0.087344 kg |
| 2 C Mono ethyl Hydro Quinone | 0.00206 kg |
| 2 D Benzyl Dimethyl Amine | 0.00412 kg |
| 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.104236 kg |
| 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.103 kg |
| 4. Photo Initiator Combo | 0.103 kg |
| 5. P.E. Wax | 0.011 kg |
| 6. Fumed Silica / Additive | 0.51 kg |
| 25. | 308 - 309 | Chemical & Allied Product Sl.No.A2406 | The description of export item shall be amended to read as under:-
“Ketoconazole BP/USP/EP” |
| 26. | 309 | Chemical & Allied Product Sl.No.A2409 | The description of import item at. Sl. No. 4, (without any change in quantity) shall be amended to read as under:-
“N, N-Dimethyl Carbomyl Chloride” |
| 27. | 315 | Chemical & Allied Product Sl.No.A2452 | The quantity of import item “Liquid Bromine” to read as under:-
“OR Liquid Bromine - 0.192 kg/kg” |
| 28. | 11 & 5 | Chemical & Allied Product Sl.No.A2528 (Notified Vide Public Notice No. 03 Dated:31/03/2003) & (amended vide Public Notice No. 10 Dated;30/05/2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2528 | Linseed Oil Based Alkyd Resin (long Oil Length) having Solid content 100% | 1 kg | 1. Refined Linseed Oil | 0.81 kg |
| 2. Isophthalic Acid | 0.15 kg |
| 3. Pentaerythritol | 0.05 kg |
| 4. Trimethylol Propane | 0.03 kg |
| 29. | 5 & 7 | Chemical & Allied Product Sl.No.A2529 (Notified Vide Public Notice No. 10 Dated:30/05/2003) & (amended vide Public Notice No. 20 Dated;01/08/2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2529 | Flush Black base for Printing Ink (46 +/- 1% Carbon Black and 41 +/-1% Solid Resin) | 1 kg | 1. Carbon Black | 0.470 kg |
| 2. Relevant Alkyd Resin namely Soya Long Oil Alkyd Resin of 70% Oil Length having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100% | 0.300 kg |
| 3. Printing Ink Vehicle –Plain (Solid content 61 +/-1%) (linseed Oil Base OR Soyabean Oil Base) | 0.200 kg |
| 4. Petroleum Distillate (Distillation Range 240-330 Degree C) | 0.050 kg |
| 30. | 337 | Chemical & Allied Product Sl.No.A2653 | The description of export product shall be amended to read as under:-
“2,2’-Azobls (2 Amidino Propane) Dihydrochloride” |
| 31. | 337 | Chemical & Allied Product Sl.No.A2655 | After the import item at Sl. No. 3, the following additional input item (with quantity) shall be added:- |
| “4. Benzene Sulfonyl Chloride | 1.10 Kg/Kg.” |
| 32. | 340 | Chemical & Allied Product Sl.No.A2683 | The norm covered by this entry shall be deleted. |
| 33. | 340 | Chemical & Allied Product Sl.No.A2687 | The description of export product shall be amended to read as under:->
“C3/C4 Hydrocarbons Viz. Propane, Propylene, Butane, Butylene/ Butene (Various grades), Liquified Petroleum Gas (LPG) (Various grades) and mixtures thereof” |
| 34. | | Chemical & Allied Product Sl.No.A2704 (amended vide Public Notice No.23 Dated:10.09.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| 2704 | Printing Ink Vehicle-Gel (Solid content 59+/-1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | 1. Relevant Alkyd Resin namely Soya Long Oil Length Alkyd Resin having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100% | 0.1050 kg |
| 2. Relevant Oil namely Refined Linseed Oil/ Soyabean Oil | 0.0200 kg |
| 3. Texanol Isobutyrate | 0.0520 kg |
| 4. Petroleum Distillate (Distillation Range 240-330 Degree Celsius) | 0.3600 kg |
| 5. Phenol Modified Rosin Ester/Rosin Modified Phenolic Resin (Technical Specification Acid values 25 max. softening point (R & B) 110 Degree-120 Celsius) | 0.4600 kgs |
| 6. Antioxidant namely BHT and MEHQ | 0.0100 kg |
| 35. | 343 | Chemical & Allied Product Sl.No.A2707 | The description of import item at Sl. No. 2, (without any change in quantity) shall be amended to read as under:-
“Petroleum Distillate (Distillation range 240 centigrade-330 centigrade)” |
| 36. | 350 | Chemical & Allied Product Sl.No.A2765 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2765 | U.V. Flush Colour-Black containing 30% +/-1% Pigment and 60%+/-1% Polyester Acrylate/ Acrylic Acrylate/ Urethene Acrylate/ Epoxy Acrylate | 1000 kgs | 1. Pigment Carbon Black | 306 kgs |
2. Polyester Acrylate
OR | 612 kgs |
2. Acrylic Acrylate
OR | 612 kgs |
2. Urethene Acrylate
OR | 612 kgs |
2. Epoxy Acrylate (75% Resin content in the Relevant Monomer)
OR | 612 kgs |
2. Raw material for Epoxy Acrylate (75% Resin Content in the Relevant Monomer)
a) Epoxy Resin | 330.48 kgs |
| b) Acrylic Acid | 129.744 kgs |
| c) Mono Ethyl Hydro Quinone | 3.060 kg |
| d) Benzyl Dimethyl Amine | 6.120 kgs |
| e) Relevant reactive Monomers namely Tri Propylene Glycol Divrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate | 154.8360 kgs |
| 3. Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Acrylate/ Di Pentaerythritol Hexa Acrylate | 86.70 kgs |
| 4. U.V. Inhibitor namely Phenothiazine/ Flourostab | 15.30 kgs |
| 37. | 350 - 351 | Chemical & Allied Product Sl.No.A2766 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2766 | U.V. Flush Colour-Yellow (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / UretheneAcrylate/ Acrylic Acrylate/ Epoxy Acrylate) | 1000 kg | 1. Pigment Yellow-12
OR | 306.00 kg |
1. Raw materials for Pigment Yellow-12
1(a)Dichlorobenzidine Di- hydrochloride | 221.85 kg |
| 1(b) Acetoacetanilide | 243.27 kg |
| 1(c) Rosin | 29.99 kg |
| 1(d) Ammonium Sulphate | 55.08 kg |
| 1(e) Sulphamic Acid | 1.53 kg |
| 1(f) Acetic Acid | 137.70 kg |
| 1(g) Caustic Soda | 144.43 kg |
| 1(h) Sodium Nitrite | 95.17 kg |
2. Polyester Acrylate
OR | 612.00 kg |
2. Acylic Acrylate
OR | 612.00 kg |
2. Urethene Acrylate
OR | 612.00 kg |
2. Epoxy Acrylate (75% Resin content in the Relevant Monomer)
OR | 612.00 kg |
2. Raw Materials for Epoxy Acrylate (75% Resin content in the Relevant Monomer)
2 A Epoxy Resin | 330.48 kg |
| 2 B Acrylic Acid | 129.74 kg |
| 2 C Mono Ethyl Hydro Quinone | 3.06 kg |
| 2 D Benzyl Dimethyl Amine | 6.12 kg |
| 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 154.84 kg |
| 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 86.70 kg |
| 4. U.V. Inhabitor Pheno-thiazine / Flourostab | 15.30 kg |
| 38. | 351 | Chemical & Allied Product Sl.No.A2769 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2769 | U.V. Flush Colour-Cyan containing 30% +/-1% Pigment and 60%+/-1% Polyester Acrylate/ Acrylic Acrylate/ Urethene Acrylate/ Epoxy Acrylate | 1000 kgs | 1. Pigment Copper Phthalocyanine Blue (Pcb Free) C.I. No. 74610) (Pigment Blue 15)
OR | 306 kgs |
1. Raw material for Pigment Copper Phthalocyanine Blue (PCB Free) (C.I. No. 74160) (Pigment Blue15):
a) Urea | 457.164 kgs |
| b) Phthalic Anhydride | 336.600 kgs |
| c) Copper Scrap | 37.332 kgs |
| d) Dichloro Toluene DCT | 44.370 kgs |
| e) Ammonium Molybdate | 3.060 kgs |
2. Polyester Acrylate
OR | 612 kgs |
2. Acrylic Acrylate
OR | 612 kgs |
2. Urethene Acrylate
OR | 612 kgs |
2. Epoxy Acrylate (75% Resin content in Relevant Monomer)
OR | 612 kgs |
2. Raw material for Epoxy Acrylate (75% resin content in relevant Monomer)
a) Epoxy Resin | 330.48 kgs |
| b) Acrylic Acid | 129.744 kgs |
| c) Mono Ethyl Hydro Quinone | 3.060 kg |
| d) Benzyl Dimethyl Amine | 6.120 kgs |
| e) Relevant reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hex Acrylate | 154.8360 kgs |
| 3. Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hex Acrylate | 86.70 kgs |
| 4. U.V. Inhibitor namely Phenothiazine/ Flourostab | 15.30 kgs |
| 39. | 353 | Chemical & Allied Product Sl.No.A2793 | The norm covered by this entry shall be deleted. |
| 40. | 355 | Chemical & Allied Product Sl.No.A2800 | The norm covered by this entry shall be deleted. |
| 41. | 35 | Chemical & Allied Product Sl.No.A3160 (amended vide Public Notice No. 03 Dated: 31.03.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3160 | Offset Printing Ink- Cyan (Pigment content 17 +/-1% and Solid resin 44 +/-1% (Flush Route) | 1 kg | 1. Flush Cyan for Printing Ink (40+/-1% Pigment & 31+/-1% Solid resin) | 0.4170 kg |
| 2. Printing Ink Vehicle-Gel (Solid content 59 +/-1%) | 0.2575 kg |
| 3. Printing Ink Vehicle-Plain (solid content 61+/-1%) | 0.2575 kg |
| 4. Polyethylene Wax compound containing 43+/-1% Polyethylene Wax 28+/-1% Tung Oil, 28+/-1% refined Linseed Oil | 0.0310 kg |
| 5. PTFE Wax compound containing 61%+/-1% PTFE Wax 33%+/-1% refined Linseed Oil | 0.0020 kg |
| 6. Cobalt Magnesium combined Drier (Metal content 12%+/-0.2%) | 0.0103 kg |
| 7. Petroleum Distillate (Distillation range 240-330 degree C) | 0.0412 kg |
| 42. | 14 | Chemical & Allied Product Sl.No.A3216 (amended vide Public Notice No. 20 Dated: 01.08.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3216 | Flush Magenta/ Rubine for printing ink (37 +/- 1% Pigment and 33 +/- 1% Solid Resin) | 1 kg | 1. Pigment Magenta/ Rubine namely Pigment Red 57:1 (C.I.No. 15850:1)/ Pigment Red 53:1 (C.I.No. 15850:1) | 0.3890 kg |
| 2. Printing Ink Vehicle –Plain (Solid content 61+/-1%) (Linseed Oil base or soyabean oil base) | 0.3930 kg |
| 3. Alkyd Resin namely Soya Long Oil alkyd Resinof 70% Oil Length having solid content 100% /Linseed Oil based Alkyd Resin (Long Oil Length ) having Solid content 100% | 0.1000 kg |
| 4. Petroleum Distillate (Distillation Range 240-330 Degree C) | 0.1220 kg |
| 5. Oleyl Alcohol | 0.0120 kg |
| 6. Antioxidant | 0.0100 kg |
| 7. Texanol Iso Butyrate | 0.0230 kg |
| 43. | 16 | Chemical & Allied Product Sl.No.A3221 (amended vide Public Notice No. 20 Dated: 01.08.2003) | The quantity of import item at Sl. No. 1, shall be amended to read as under:- “0.531 kg per kg” |
| 44. | 18 - 19 | Chemical & Allied Product Sl.No.A3237 (amended vide Public Notice No. 23 Dated: 10.09.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3237 | Flush Cyan for springing ink (40 +/-1% Pigment and 34+/- 1% Solid Resin) | 1 kg | 1. Pigment Cyan namely Pigment Phthalo Cyanine Blue 1450 /Pigment Copper Phthalocyanine Blue/Copper Phthalocyanine Crude (PCB Free) C.I.No. 74160) Pigment Blue 15) | 0.4200 kg |
| 2. Printing Ink Vehicle –Plain (Solid content 61+/-1%) Linseed Oil Base OR Soybean Oil Base) | 0.4150 kg |
| 3. Alkyd Resin namely Soya Long oil Alkyd Resin of 70% Oil length having solid content 100% Linseed Oil based Alkyd Resin (Long Oil Length )having solid content 100% | 0.0950 kg |
| 4. Petroleum Distillate (Distillation Range 240-330 Degree C) | 0.0350 kg |
| 5. Oleyl Alcohol | 0.0210 kg |
| 6. Antioxidant | 0.0057 kg |
| 45. | 16 | Chemical & Allied Product Sl.No.A3257 (amended vide Public Notice No. 31 Dated: 05.11.2003) | After the import item at Sl. No. 1, the following additional input item (with quantity) shall be added:-
“2. Acrylic Polymer - 0.000262 kg/kg.” |
| 46. | 19 - 20 | Chemical & Allied ProductSl.No.A3285 (amended vide Public Notice No. 38 Dated: 09.01.2004) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3285 | U.V. Curable Printing Ink-Black (Flush Route) Pigment 16.7% +/-1% | 1 kg | 1. U.V. Flush Colour-Black (30% +/- 1% Pigment and 60%+/-2% Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate | 0.5760 kg |
2. Polyester Acrylate
OR | 0.1960 kg |
2. Acrylic Acrylate
OR | 0.1960 kg |
2. Urethene Acrylate
OR | 0.1960 kg |
2. Epoxy Acrylate (75% Resin content Resin content in the Relevant Monomer)
OR | 0.1960 kg |
| Raw material for EPOXY Acrylate (75% Resin content in the Relevant Monomer) | 0.1058 kg |
| 2(A) Epoxy Resin | 0.1058 kg |
| 2(B) Acrylic Acid | 0.0416 kg |
| 2(C) Mono Ethyl Hydro Quinone | 0.0010 kg |
| 2(D) Benzyl Dimethyl Amine | 0.0020 kg |
| 2(E) Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methyl Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.0496 kg |
| 3. Relevant Reactive Monomer namely, Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated, Tri Methylol Propane Tri Acrylate/ Di-Pentaerythritol Hexa Acrylate | 0.0730 kg |
| 4. Photo Initiator Combo | 0.1240 kg |
| 5. P.E. Wax | 0.0110 kg |
| 6. Fumed Silica / Additive | 0.0510 kg |
| 47. | 20 | Chemical & Allied Product Sl.No.A3286 (Notified vide Public Notice No. 38 Dated:09/01/2004) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3286 | U.V. Curable Printing Ink-Various Colours, Flush Route (Pigment 15% +/-1%) (Other than Black, Cyan, Magenta & Yellow | 1 kg | 1. U.V. Flush Various Colour (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate) | 0.5150 kg |
2. Polyester Acrylate
OR | 0.2470 kg |
2. Acrylic Acrylate
OR | 0.2470 kg |
2. Urethene Acrylate
OR | 0.2470 kg |
2. Epoxy Acrylate (75% Resin content in the Relevant Monomer)
OR | 0.2470 kg |
2. Raw Materials for Epoxy Acrylate (75% Resin content in the Monomer)
2 A Epoxy Resin | 0.1334 kg |
| 2 B Acrylic Acid | 0.0524 kg |
| 2 C Mono ethyl Hydro Quinone | 0.0012 kg |
| 2 D Benzyl Dimethyl Amine | 0.0025 kg |
| 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.0625 kg |
| 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.1030 kg |
| 4. Photo Initiator Combo | 0.1030 kg |
| 5. P.E. Wax | 0.0110 kg |
| 6. Fumed Silica / Additive | 0.0510 kg |
| 48. | 21 | Chemical & Allied Product Sl.No.A3287 (amended vide Public Notice No. 38 Dated: 09.01.2004) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3287 | U.V. Curable Printing Ink-Magenta/ Rubine (Flush Route) Pigment 17.4+/-1% | 1 kg | 1. U.V. Flush Colour-Magenta/ Rubine (30% +/-1% Pigment and 60%+/-2% Polyester Acrylate / Urethene Acrylate / Acrylic Acrylate/Epoxy Acrylate) | 0.5970 kg |
2. Polyester Acrylate
OR | 0.1750 kg |
2. Acrylic Acrylate
OR | 0.1750 kg |
2. Urethene Acrylate
OR | 0.1750 kg |
Epoxy Acrylate (75% Resin content in the Relevant Monomer)
OR | 0.1750 kg |
| Raw material for EPOXY Acrylate (75% Resin content in the Relevant Monomer) | 0.0940 kg |
| 2(A) Epoxy Resin | 0.0940 kg |
| 2(B) Acrylic Acid | 0.0371 kg |
| 2(C) Mono Ethyl Hydro Quinone | 0.0009 kg |
| 2(D) Benzyl Dimethyl Amine | 0.0018 kg |
| 2(E) Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate /Di Pentaerythritol Hexa Acrylate | 0.0443 kg |
| 7. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hexa Acrylate | 0.1140 kg |
| 8. Photo Initiator Combo | 0.0820 kg |
| 9. P.E. Wax | 0.0110 kg |
| 10. Fumed Silica / Additive | 0.0510 kg |
| 49. | 22 | Chemical & Allied Product Sl.No.A3288 (amended vide Public Notice No. 38 Dated: 09.01.2004) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3288 | U.V. Curable Printing Ink-Cyan, Flush Route (Pigment 14.7+/-1% | 1 kg | 1. U.V. Flush Colour-Cyan (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate) | 0.5050 kg |
2. Polyester Acrylate
OR | 0.2580 kg |
2. Acylic Acrylate
OR | 0.2580 kg |
2. Urethene Acrylate
OR | 0.2580 kg |
2. Epoxy Acrylate (75% Resin content in the Relevant Monomer)
OR | 0.2580 kg |
2. Raw Materials for Epoxy Acrylate (75% Resin content in the Relevant Monomer)
2 A Epoxy Resin | 0.1393 kg |
| 2 B Acrylic Acid | 0.0547 kg |
| 2 C Mono Ethyl Hydro Quinone | 0.0013 kg |
| 2 D Benzyl Dimethyl Amine | 0.0026 kg |
| 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.0653 kg |
| 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate | 0.1030 kg |
| 4. Photo Initiator Combo | 0.1030 kg |
| 5. P.E. Wax | 0.0110 kg0 |
| 6. Fumed Silica / Additive | 0510 kg |
| 50. | 429 - 430 | Electronics Product Sl.No.B-106 | The description of export product shall be amended to read as under:-
“Computer Motherboards
OR
PC Motherboards” |
| 51. | 525 | Engineering Product Sl.No.C248 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod” |
| 52. | 526 | Engineering Product Sl.No.C253 | In the description of import item at Sl No. 1(a) & 1(c), the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“1(a) Copper Cathode/Wire Bar/CC Rod/Wire/Copper Wire Rod
OR
1(c) Copper Alloy Wire/Cathode/Wire Bar/ C C Rod / Wire / Copper Wire Rod” |
| 53. | 526 - 527 | Engineering Product Sl.No.C254 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper (Cathode/Wire Bar/ Continuous Cast Rod/ Wire/ Alloy Wire)/ Copper Wire Rod ” |
| 54. | 527 | Engineering Product Sl.No.C255 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper (Cathode/Wire Bar/ Continuous Cast Rod/ Wire/ Alloy Wire)/ Copper Wire Rod ” |
| 55. | 530 | Engineering Product Sl.No.C267 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 56. | 530 | Engineering Product Sl.No.C268 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 57. | 530 | Engineering Product Sl.No.C269 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 58. | 530 | Engineering Product Sl.No.C270 | In the description of import item at Sl No. 1(a), the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“1(a) Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/ Copper Wire Rod” |
| 59. | 531 | Engineering Product Sl.No.C271 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ CC Rods/Wire Bars (EC Grade)/ Copper Wire Rod” |
| 60. | 531 | Engineering Product Sl.No.C272 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ CC Rods/Wire Bars (EC Grade)/ Copper Wire Rod” |
| 61. | 540 | Engineering Product Sl.No.C297 | The quantity of export product shall be amended to read as under:-
“ 1 kg” |
| 62. | 4 - 5 | Engineering Product Sl.No.C371 (notified vide Public Notice No. 06 Dated:08/05/2003) | The description of export product shall be amended to read as under:-
“Galvanised Steel Stranded Wire (Wire Strand)” |
| 63. | 564 | Engineering Product Sl.No.C396 | The norm covered by this entry shall be deleted. |
| 64. | 614 - 616 | Engineering Product Sl.No.C525 | 1. The description of import item at Sl. No. 2(b), (with quantity) shall be substituted to read as under:- |
“2(b) Ferro Nickel
OR | 240 kg |
Nickel Oxide Sinter
OR | 105 kg |
| Unwrought Nickel | 90 kg” |
2. After foot note at Sl. No. 4, the following foot note below this entry shall be added:-
“Note:5. Ferro Nickel/Nickel Oxide Sinter/ Unwrought Nickel under this SION shall be allowed for austenitic stainless steel covered under AISI 200 Series and AISI 300 series. Further, against export of low nickel austenitic stainless steel products (AISI 200 Series), quantities of the 3 alternate forms of nickel shall be limited to 33% of the quantity individually mentioned above.” |
| 65. | 657 - 658 | Engineering Product Sl.No.C832 | The description of export products shall be amended to read as under:-
“Table, Kitchen & Other household articles made of Stainless Steel with or without handle / lid/ antiskid gasket irrespective of what material the handle / lid / antiskid gasket may have been made of” (other than those covered under the SION C-833) |
| 66. | 658 | Engineering Product Sl.No.C833 | The description of export products shall be amended to read as under:-
“Table, Kitchen & Other household articles made of Stainless Steel with or without handle / lid/ antiskid gasket irrespective of what material the handle / lid / antiskid gasket may have been made of (rectangular / square with straight edges)” |
| 67. | 659 | Engineering Product Sl.No.C841 | The norm covered by this entry shall be deleted. |
| 68. | 18 - 19 | Engineering Product Sl.No.C890 (amended vide Public Notice No. 44 Dated:18/10/2002) | 1. The quantity of export product shall be amended to read as under:-
“1000 Nos.”
2. The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:- |
| “1. Nickel Silver Brass Strip | 1.08 kg./kg. content in the Export product” |
| 69. | 744 | Engineering Product Sl.No.C1195 | The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:- |
| “1. Lead Scrap namely ISRI Radio, Racks, Relay, Ropes & Roses | 1.06 kg./kg. content in export Product” |
| 70. | 745 | Engineering Product Sl.No.C1205 | The norm covered by this entry shall be deleted. |
| 71. | 746 - 747 | Engineering Product Sl.No.C1223 | The description of export product shall be amended to read as under:-
“Magnetic Assemblies Incorporating cast Alloy permanent magnets e.g.” |
| 72. | 839 | Engineering Product Sl.No.C1635 | In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper Cathode/CC Rod/Wire Bars Ingots/ Copper Wire Rod” |
| 73. | 23 | Engineering Product Sl.No.C1850 (amended vide Public Notice No. 54 Dated: 03.01.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C-1850 | Synthetic Media Pocket | 1 No. | 1. Synthetic Non Woven Filter Media of relevant efficiency and GSM | 1.04Sq.Mtr/ Sq.Mtr. content in the export product |
| 74. | 46 | Engineering Product Sl.No.C1884 (amended vide Public Notice No. 03 Dated: 31/03/2004) | 1. The description of export item shall be amended to read as under:-
“Seamless Non-Alloy Steel Casing Tubes”
2. The description of import items at Sl. No. 1 to 3, (with quantity) shall be amended to read as under:- |
| “1. Non-Alloy Steel Bilets / Rounds | 1.25 kg |
| 2. Thread Protectors | Net to net |
| 3. Thread Inserts / Cut off blades | Upto 2% of FOB value” |
| 75. | 926 - 928 | Leather Product Sl.No.G-7 | 1. The description of import item at Sl. No. 12, (with quantity) shall be amended to read as under:- |
“12(a) For all Chrome Tanned Leather
(i) Chrome Tanning Agent | 50 kg |
| (ii) Vegetable Tanning Agent such as Wattle or Mimosa/ Quebracho and supplementary Vegetable tanning agents such As Gambier/ Chestnut/Tara/ Sumac | 20 kg |
| 12(b) For Vegetable Tanned Leather Main vegetable tanning Agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/Chestnut/Tara/ Sumac subject to the condition That Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum Of 30 kg | 150 kg |
12(c) For combination of tanned leather / semi chrome tanned leather
(i) Vegetable Tanning Agent such as Wattle or Mimosa/Quebracho and Supplementary Vegetable tanning agents such as Gambier/ Chestnut/Tara/ Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a Maximum of 30 kg | 150 kg |
| (ii) Chrome Tanning Agent | 22 kg |
2. The import item at Sl. No. 13 stands deleted.
3. After the foot note at Sl. No. 1, the following foot note shall be added:-
Note:2. Item No. (ii) for 12(a) shall not be allowed for the grain garment leather and gloving leather.
Note:3. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/Tara/Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale.” |
| 76. | 956 - 958 | Leather Product Sl.No.G-46 | 1. The description of import item at Sl. No. 12, (with quantity) shall be amended to read as under:- |
“12(a) For all Chrome Tanned Leather
(i) Chrome Tanning Agent | 30 kg |
| (ii) Vegetable Tanning Agent such as Wattle or Mimosa/ Quebracho and supplementary Vegetable tanning agents such As Gambier/ Chestnut/Tara/Sumac | 12 kg |
| 12(b) For Vegetable Tanned Leather Main vegetable tanning agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/Chestnut/Tara/ Sumac subject to the condition That Supplementary Tanning agents such as Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum Of 11 kg | 55 kg |
12(c) For combination of tanned leather / semi chrome tanned leather
(i) Vegetable Tanning Agent such as Wattle or Mimosa/ Quebracho and Supplementary Vegetable tanning agents such as Gambier/ Chestnut/Tara/ Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a Maximum of 11 kg | 55 kg |
| (ii) Chrome Tanning Agent | 13 kg |
2. The import item at Sl. No. 13 stands deleted.
3. The following Foot notes below this entry shall be added:-
Note:1. Item No. (ii) for 12(a) shall not be allowed for the grain garment leather and gloving leather.
Note:2. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/Tara/Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale.” |
| 77. | 968 | Plastics Product Sl.No.H-47, H-48, & H-49 | Entries at Sl. Nos. H-47, H-48 & H-49 shall be deleted. |
| 78. | 992 | Plastics Product Sl.No.H-177 | The norm covered by this entry shall be deleted. |
| 79. | 1000 | Plastics Product Sl.No.H-241 (amended vide Public Notice No. 46 Dated:06.11.2002) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-241 | PP Woven Sacks with/without liner | 1 kg | 1. PP Granules | 1.10 kgs/kg content in export |
| 2. Plastic Material used for liner | 1.05 kgs/ kg content in export |
| 80. | 1036 | Plastics Product Sl.No.H-419 | The norm covered by this entry shall be re-stored by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-419 | Drip Bateral of 13 mm ID, Wall thickness 1.25 mm having inline hole of 3.2 mm at 75 mm equal distance made out of LLDPE & LDPE in 500 mts. Roll | 1 kg | 1. LLDPE Granules | 0.6615 kg |
| 2. LDPE Granules | 0.3297 kg |
| 3. Relevant Master Batch | 0.0588 kg |
| 81. | 1041 | Plastics Product Sl.No.H-444 (amended vide Public Notice No. 38 Dated:09.01.2004) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Relevant Duplex Paper Board/ Bleached Paper/ Bleached Paper Board/Kraft Paper” |
| 82. | 1042 | Plastics Product Sl.No.H-449 | The norm covered by this entry shall be deleted. |
| 83. | 15 | Miscellaneous Product Sl.No.K-46 (amended vide Public Notice No. 23 Dated:10.09.2003) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“1. Glass Rods
OR
Unfinished Glass Beads /Chatons” |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3333 | 4-(((4-Fluorophenyl) Imino) Methyl) Phenol (Schiffs Base) | 1 kg | 1. P-Hydroxy Benzaldehyde | 0.63 Kg./Kg. |
| 2. P-Fluoro Aniline | 0.58 Kg/kg. |
| 3. Isopropyl Alcohol | 1.00 Kg/Kg. |
| A3334 | Silver Nitrate (Assay = 99.99% min.) Silver content = 63.5% min. | 1 kg | 1. Silver | 0.6351 kg. |
| A3335 | Boron Trifluoride | 1 kg | 1. Fluorspar (acid grade) | 2.6 kg. |
| 2. Boric Acid | 1.048 kg. |
| A3336 | Para Fluoro Aniline/ Ortho FluoroAniline | 1 kg | 1. Fluoro Benzene | 1.145 kg. |
| A3337 | Mixed Butylated Phenol (containing 75% min. 2,6 Ditertiary Butyl Phenol and 25% Max. Mono Tertiary Butyl Phenol & Tertiary Butyl Phenol) | 1 kg | 1. Phenol | 0.632 kg. |
| 2. Isobutylene | 0.760 kg. |
| A3338 | Ceramic Fibre Blanket (1260 C Grade) | 1 MT | 1. Alumina | 0.480 MT |
| 2. Quartz | 0.604 MT |
| 3. Inter-Locking Needles (Felting Needles) | 249 Nos. |
| 4. Electric Furnace Nozzle made of Molybdenum | 1 No/ 1150 Tonnes of export |
| 5. Electric Furnace Nozzle Support made of Molybdenum | 1 No/ 1150 Tonnes of export |
| 6. Furnace Resin Block made of Molybdenum | 1 No/ 3600 Tonnes of export |
| 7. Electric Furnace Electrode End made of Molybdenum | 1.89 Nos./ 525 Tonnes of export |
| 8. Electric Furnace Electrode Head | 1.89 Nos./ 525 Tonnes of export |
| A3339 | Ink Flow Improver containing minimum 95% Texanol Isobutyrate | 1 kg | 1. Petroleum Distillate (Distillation Range 240-330 Degree Celsius) | 0.051 kg |
| 2. Texanol Isobutyrate | 0.969 kg |
| A3340 | Printing Ink Vehicle Special Gel-Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | 1. Petroleum Distillate (Distillation Range 240-330 Degree C) | 34.800 kgs |
| 2. Bis-Phenol-A | 0.200 kgs |
| 3. Butylated Hydroxy Toluene | 0.050 kgs |
| 4. Di-Cyclopentadiene | 20.480 kgs |
| 5. Sylvblend FA 7002/DIMER Acid | 0.450 kgs |
| 6. Fumaric Acid | 3.350 kgs |
| 7. Glycerine | 0.006 kgs |
| 8. Isophthalic Acid | 2.000 kgs |
| 9. Light Magnesium Oxide | 0.011 kgs |
| 10. Neodene | 2.600 kgs |
| 11. Nony Phenol | 13.200 kgs |
| 12. Oxyaluminium Octoate | 0.500 kgs |
| 13. Tertiary Butyl Catechol | 0.010 kgs |
| 14. Para Tertiary Butyl Phenol (PTBP) | 0.450 kgs |
| 15. Paraformaldehyde | 2.200 kgs |
| 16. Pentaery thritol | 3.050 kgs |
| 17. Refined Linseed Oil | 8.800 kgs |
| 18. Rosin | 13.800 kgs |
| 19. Texanol Isobutyrate | 8.100 kgs |
| 20. Tri Phenyl Phosphite | 0.012 kgs |
| 21. Trimethylol Propane | 0.700 kgs |
| A3341 | Benfuresate Technical (98%) | 1 kg | 1. NC 9770(Approx. 80% Solution in Toluene) | 1.526 kg |
| 2. Sodium Borohydride Granules / Powder | 0.046 kg |
| 3. Filter Aid (Celatom FW 50) | 0.013 kg |
| 4. Triethyl Amine | 0.063 kg |
| 5. Xylene / Mixed Xylene | 0.120 kg |
| A3342 | Sodium Salt of Mercapto Benzothiazole 50% W/W Aqueous Solution | 1 kg | 1. Aniline | 0.272 kg |
| 2. Carbon Disulphide | 0.208 kg |
| 3. Molten Sulphur | 0.090 kg |
| 4. Caustic Soda | 0.107 kg |
| 5. Ortho Xylene | 0.002 kg |
| A3343 | Paramenthane Hydroperoxide (Paramenthane Hydroperoxide content 54-56% Paramenthane content 44-46%) | 1 kg | 1. Para Menthane | 0.920 kg |
| A3344 | Tripolidine HCL | 1 kg | 1. 4-Methyl Acetophenone | 2.20 kg |
| 2. Purrolidine | 1.03 kg |
| 3. Lithium | 0.10 kg |
| 4. ISO Propyl Alcohol | 1.50 kg |
| 5. 2-Bromopyridine | 2.75 kg |
| A3345 | Sodium 2 Ethyl Hexanoate | 1 kg | 1. 2 Ethyl Hexanoic Acid | 0.92 kg |
| A3346 | White / Yellow Petroleum Jelly | 1 kg | 1. Base Oil | 0.75 kg |
| 2. Paraffin Wax | 0.17 kg |
| 3. Micro-crystalline Wax | 0.09 kg |
| A3347 | Bis (2,2,6,6 Tetramethyl-4 Piperidinyl) Sebacate | 1 kg | 1. 2,2,6,6, Tetramethyl-4-Piperdinol | 0.839 Kg |
| 2. Dimethyl Sebacate | 0.614 Kg |
| 3. Acetonitrite | 0.400 kg |
| A3348 | Oil resistant metal fitted/metal bonded/metal un-bounded rubber parts (moulded/Extruded) including Engine Mounting & automotive part | 1 kg | 1. Mild Steels/ coils/ plates/ rods/ rounds/ strips | 1.30 Kg./Kg. content in the export product. |
2. Relevant Rubber compound consisting of the following:
2(a) Relevant Natural rubber/ relevant synthetic rubber namely, NBR depending upon the description of the product to be exported | 0.63 Kg/Kg. content of rubber compound in the export product. |
| 2(b) Carbon black | 0.126 Kg/Kg. content of rubber compound in the export product. |
| 2(c) Zinc Oxide | 0.0315 Kg/ Kg. content of rubber compound in the export product |
| 2(d) Rubber chemical viz antioxidants/ accelerators/ retarder and pepitizer | 0.012 Kg/Kg. content of rubber compound in the export product. |
| 2(e) Misc chemicals viz. stearic acid, insoluble sulphur, silicon oil | 0.042 Kg/Kg. content of rubber compound in the export product. |
| 3. Bonding agent for metal bonded parts | 0.01 Kg./Kg. of steel in the export product |
| A3349 | Other specialty metal fitted/ metal bounded/ metal un- bonded rubber parts (moulded/ extruded) including engine mounting & automotive parts (Heat & weather resistant) | 1 kg | 1. Mild Steels/ coils/ plates/ rods/ rounds/ strips | 1.30 Kg./Kg. content in the export product. |
2. Relevant Rubber compound consisting of the following:
2(a) Relevant Natural rubber/ relevant synthetic rubber namely, Polychlroprene/ EPDM depending upon the description of the product to be exported | 0.63 Kg/Kg. content of rubber compound in the export product. |
| 2(b) Carbon black | 0.126 Kg/Kg. content of rubber compound in the export product. |
| 2(c) Zinc Oxide | 0.0315 Kg/Kg. content of rubber compound in the export product |
| 2(d) Rubber chemical viz antioxidants/ accelerators/ retarder and pepitizer | 0.012 Kg/Kg. content of rubber compound in the export product. |
| 2(e) Misc chemicals viz. stearic acid, insoluble sulphur, silicon oil | 0.042 Kg/Kg. content of rubber compound in the export product. |
| 3. Bonding agent for metal bonded parts | 0.01 Kg./Kg. of steel in the export product |
| A3350 | Oil resistant moulded goods of synthetic rubber only (NBR) | 1 kg | 1. Synthetic Rubber namely (NBR) | 0.600 Kg. |
| 2. Carbon Black/ Precipitated Silica | 0.240 Kg. |
| 3. Zinc Oxide | 0.027 Kg. |
| 4. Rubber Chmicals (Accelerator,Antioxidant, Rearders,Pepitiser | 0.024 Kg. |
| 5. Miscellaneous Chemicals (Microcrystyalline Wax, Paraffin Wax,Plasticiser, Softners, Pigments, Stearic Acid,Sulphur, Coupling Agents, Activators,Tackifiers) | 0.050 Kg. |
| A3351 | Other specialty moulded goods of synthetic rubber only (Neoprene/EPDM) | 1 kg | 1. Synthetic Rubber only Polychloroprene/ EPDM | 0.600 Kg. |
| 2. Carbon Black/ Precipitated Silica | 0.240 Kg. |
| 3. Zinc Oxide | 0.027 kg |
| 4. Rubber Chmicals (Accelerator, Antioxidant, Retarders, Pepitiser. | 0.024 Kg. |
| 5. Miscellaneous Chemicals (Microcrystyalline Wax, Paraffin Wax,Plasticiser, Softners, Pigments, Stearic Acid, Sulphur, Coupling Agents, Activators, Tackifiers) | 0.050 Kg |
| A3352 | Oil resistant relevant natural rubber/ synthetic rubber based rubber compounded sheets/ rings /gaskets | 1 kg | 1. Natural rubber/ Synthetic Rubber namely HBR | 0.680 Kg. |
| 2. Zinc Oxide | 0.0212 Kg |
| 3. Carbon Black | 0.170 Kg. |
| 4. Antioxident/ Accelerator/ Retarder/ Peptisizer. | 0.010 Kg. |
| 5. Miscellaneous chemicals (Microcrystalline wax paraffin wax, pigment and softners, sulphur, stearic acid solvent, plasticizers, synthetic resins, bounding/coupling agents, activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackifiers and catalysts and syloff. | 0.042 Kg. |
| A3353 | Other specialty relevant natural rubber/ synthetic rubber based rubber compounded sheets/ rings /gaskets | 1 kg | 1. Natural Rubber/ Relevant Synthetic Rubber namely, Neoprene / EPDM | 0.680 Kg. |
| 2. Zinc Oxide | 0.0212 Kg |
| 3. Carbon Black | 0.170 Kg. |
| 4. Antioxident/ Accelerator/ Retarder / Peptisizer | 0.010 Kg. |
| 5. Miscellaneous chemicals (Microcrystalline wax paraffin wax, pigment and softners, sulphur, stearic acid solvent, plasticizers, synthetic resins, bounding / coupling agents, activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackifiers and catalysts and syloff | 0.042Kg. |
| A3354 | Oil Resistant Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber | 0.382Kg. |
| 2. Synthetic Rubber namely, NBR | 0.130Kg. |
| 3. Carbon Black | 0.358Kg. |
| 4. Zinc Oxide | 0.026Kg. |
| 5. Rubber Chemicals (Accelerator /Antioxidant/ Pepitizers/ Retarders) | 0.020Kg. |
| 6. Miscellaneous Chemicals (Microcrystalline Wax) | 0.075Kg. |
| A3355 | Other Specialty Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber | 0.382Kg. |
| 2. Synthetic rubber namely, Neoprene/ EPDM | 0.130Kg. |
| 3. Carbon Black | 0.358Kg. |
| 4. Zinc Oxide | 0.026Kg. |
| 5. Rubber chemicals (Accelerator/Antioxidant/Peptizers/ Retarders) | 0.020Kg. |
| 6. Miscellaneous Chemicals (Microcrystalline Wax) | 0.075Kg. |
| A3356 | 2-(2,4 Difluorophenyl) Propane/(1,3 Difluoro Benzene Cumene) | 1 kg | 1. 1,3 Difluoro Benzene | 1.50 kg. |
| A3357 | Trimipramine Maleate E.P. | 1 kg | 1. 1-Bromo-3-Chloro 2 Methyl Propane | 0.52 kg. |
| 2. Iminodibenzyl | 0.53 kg. |
| A3358 | Clonazepam BP/ USP | 1 kg | 1. 2-Amino-5-Nitro-2-Chlorobenzophenone | 1.33 kg. |
| A3359 | Closantel | 1 kg | 1. Para Chloro Ortho Nitro Toluene | 1.00 kg. |
| 2. Iodine | 1.13 kg. |
| A3360 | Printing Ink Vehicle-Plain (Solid content 61+/-1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | 1. Relevant Alkyd Resin namely Soya Long Oil Alkyd resin of 70% Oil length having Solid content 100% / Linseed Oil Based Alkyd resin (Long Oil Length) | 0.105 kg |
| 2. Soya Bean Oil | 0.051 kg |
| 3. Petroleum Distillate (Distillation Range 240-330 Degree Centigrade) | 0.402 kg |
| 4. Phenol Modified Rosin Ester / Rosin Modified Phenolic Resin (Technical Specification in Acid Values 25 max. softening Point (R&B) 110 Degree-120 Degree Centigrade) | 0.367 kg |
| 5. Structed Phenolic Modified Rosin Ester | 0.108 kg |
| 6. Aluminium Chelate | 0.010 kg |
| A3361 | Soya Clay Compound (Containing 26 +/-1% Soya Bean Oil and 56 +/-1% China Clay) | 1 kg | 1. China Clay Powder | 0.570 kg |
| 2. Soya Bean Oil | 0.262 kg |
| 3. Spindle Oil | 0.156 kg |
| 4. Refined Linseed Oil | 0.032 kg |
| A3362 | Water Fighting compound containing Minimum 53% +/- 1% Petroleum and 20%+/- 1% Polyethylene Wax (Ink Additive) | 1 kg | 1. Petrolatum | 0.541 kg |
| 2. Polyethylene Wax | 0.204 kg |
| 3. Petroleum Distillate (Distillation Range 240-330 Degree Centigrade) | 0.051 kg |
| 4. Wax Emulsifier | 0.224 kg |
| A3363 | Pre Reforming Catalyst Type: C11-PR Containing Nickel Oxide = 55-58% Magnesium Oxide 13+/-2%) | 1 kg | 1. Nickel Metal unwrought | 0.433 kg. |
| 2. Magnesium Oxide | 0.132 kg |
| 3. Special Grade Alumina Powder (Moisture content 25%) | 0.102 kg. |
| A3364 | Phenazopyridine Hydrochloride USP | 1 kg | 1. Pyridine | 0.96 kg. |
| 2. Aniline | 0.62 kg. |
| 3. Dimethyl Aniline | 0.50 kg. |
| 4. Acetone | 1.00 kg. |
| A3365 | Hydrotreating Catalyst (containing Cobalt Oxide = 3-4% Molybdenum Trioxide 10+1/2% Alumina = 87+1% | 1 kg | 1. Special Grade Alumina Powder (moisture content 25%) | 1.109 kg. |
| 2. Molybdenum Trioxide | 0.101 kg. |
| 3. Cobalt Metal | 0.017 kg. |
| A3366 | 5-Methyl Nicotinic Acid | 1 kg | 1. 3,5-Lutidine | 2.90 kg. |
| 2. Potassium Permanganate | 8.50 kg. |
| 3. Isopropyl alcohol | 3.00 kg. |
| A3367 | Salsalate B.P./U.S.P | 1 kg | 1. Salicylic Acid | 1.24 kg. |
| 2. IPA | 1.00 kg. |
| A3368 | Citronellyl Acetate | 1 kg | 1. Citronellol | 0.891 kg. |
| 2. Acetic Acid | 0.257 kg. |
| A3369 | Copper Carbonate (Wet cake) (Copper content 46%) | 1 kg | 1. Copper Scrap | 0.478 kg. |
| Note : In case of variation of copper content in export product, pro-rata calculation for input quantities should be needed. |
| A3370 | Toner for Photocopier (Pure Tone-6000) | 1 kg | 1. Resin (Styrene Acrylate Resin) | 0.670 kg |
| 2. Wax | 0.025 kg. |
| 3. Fumed Silica | 0.020 kg |
| 4. Magnetite | 0.350 kg. |
| 5. Additive (Charge control Agent/ Titanium Dioxide) | 0.040 kg. |
| A3371 | 5-Sulfo Salicylic Acid | 1 kg | 1. Salicylic Acid | 0.680 kg. |
| A3372 | Sodium Cyanate | 1 kg | 1. Soda Ash | 0.860 kg. |
| A3373 | 8-Chloro Theophylline | 1 kg | 1. 1,3-Dimethyl FAU | 1.68 kg. |
| 2. Ethylene Dichloride | 0.50 kg. |
| 3. Dimethyl Formamide | 0.50 kg. |
| A3374 | Furane Resin containing 2% Silane (Arfurane C Solution) | 1 kg | 1. Furfuryl Alcohol | 0.97 kg |
| 2. Silane | 0.02 kg |
| A3375 | Beta Blue Pigment wet cake (Phthalocyanine Beta Blue Pigment Wet cake (on 100% basis) | 1 kg | 1. Pigment Copper Phthalocyanine Blue/ Copper Phthalocyanine blue crude (PCB free) (C.I.No. 74160) (Pigment Blue 15)
OR | 1.00 kg |
| 1(i) Urea | 1.494 kg |
| (ii) Phthalic Anhydride | 1.100 kg |
(iii) Cuprous Chloride
OR | 0.214 kg |
| Copper Scrap | 0.122 kg |
| (iv) Alkyl Benzene | 0.195 kg |
| (v) Ammonium Molybdate | 0.010 kg |
| 2. Diethylene Glycol | 0.828 kg |
| A3376 | Tertiary Butyl Peroxy Isopropyl Carbonate Benzoate In odourless Mineral sprit (assay 74 - 76%) | 1 kg | 1. Tertiary Butyl Hydro peroxide | 0.406 kg |
| 2. Isopropyl Chlororformate | 0.553 kg |
| 3. Odourless Mineral Sprit | 0.250 kg |
| A3377 | Nylon Twine made out of Nylon Filament | 1 kg | 1. Nylon Twine made out of imported Nylon filament yarn 210 D nylon 6 | 1.04 kg. |
| A3378 | Alpha Picoline | 1 kg | 1. Pyridine Base-L containing average 35% alpha Picoline | 3.33 kg. |