Attention is invited to Paras 7.8, 7.9 and 7.10 of Handbook of Procedures, Vol.1, 1997-2002, published under the Ministry of Commerce Public Notiice No.1/1997-2002 dated 31.3.1997 and Handbook of Procedure, Vol.2, 1997-2002 published under the Ministry of Commerce Public Notice No.2/1997-2002 dated 31.3.1997.
2. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedure, Vol.2, amendments / corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.
3. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below:-
After Entry No.A-2026, the new entries from Sl.No.A-2027 to A-2062 shall be added as per Annexure "B" to this Public Notice.
After Entry No.C-1328, the new entries from Sl.No.C-1329 to C-1344 shall be added as per Annexure "C" to this Public Notice.
After Entry No.E-68, the new entries from Sl.No.E-69 to E-70 shall be added as per Annexure "D" to this Public Notice.
After Entry No.H-370, the new entries from Sl.No.H-371 to H-382 shall be added as per Annexure "E" to this Public Notice.
After Entry No.J-297, the new entries from Sl.No.J-298 to J-299 shall be added as per Annexure "F" to this Public Notice.
After Entry No.K-109, the new entries from Sl.No.K-110 to K-111 shall be added as per Annexure "G" to this Public Notice.
This issues in public interest.
| Sl. No. | Page No. | Reference | Amendments / Corrections |
| (1) | (2) | (3) | (4) |
| 1. | 6 | Chemicals & Allied Products Sl.No.A1 | The norms covered by this entry shall be deleted. |
| 2. | 17 | Chemicals & Allied Products Sl.No.A68 | After import item 2(b), following alternative item with quantity shall be added in the respective columns |
"OR
2. D(-)Alpha Phenyl-Glycine Ethyl Aceto Acetate Potassium Dane Salt". | 0.94 kg |
| 3. | 18 | Chemicals & Allied Products Sl.No.A69 | After import item 3(b), following alternative item with quantity shall be added:- |
"OR
2. D(-)Alpha Phenyl-Glycine Ethyl Aceto Acetate Potassium Dane Salt". | 0.94 kg |
| 4. | 29 | Chemicals & Allied Products Sl.No.A140 | The description of the export product shall be corrected to read as under:-
"CIS + Hydroxy Lactam / CIS(+)-2-(4-Methoxy Phenyl)-3- Hydroxy-2, 3-Dihydro-1,5-Benzothia- zepin-4-(5 H)-One." |
| 5. | 63 | Chemicals & Allied Products Sl.No.A391 | 1. The quantity of import item 1 shall be amended to read as "2.14 kg".
2. After import item 1, the following lternative item with quantity shall be added in the respective columns :- |
"OR
Erythromycin Base (on 100% Activity Base)". | 2.23 kgs |
| 6. | 68 | Chemicals & Allied Products Sl.No.A427 | In Note below this entry, the period "31.12.1997" shall be amended to read as "31.12.1998". |
| 7. | 74 & 75 | Chemicals & Allied Products Sl.No.A493 | The norms covered by this entry shall be deleted. |
| 8. | 84 | Chemicals & Allied Products Sl.No.A580 | The norms covered by this entry shall be substituted by the following:- |
| A580 | Di-ethyl Aniline | 1 Kg. | 1. Aniline | 0.800 kg. |
| 2. Denatured Ethyl Alcohol(Purity 90%) | 0.924 Kg. |
| 9. | 86 | Chemicals & Allied Products Sl.No.A606 | After import item 2, following item with quantity shall be added:-
"3. Acetone- 2.3 kgs". |
| 10. | 102 | Chemicals & Allied Products Sl.No.A720 | The norms covered by this entry shall be substituted by the following:- |
| A720 | Mono Ethyl Aniline | 1 kg. | 1. Aniline | 0.854 Kg. |
| 2. Denatured Ethyl Alcohol(Purity 90%) | 0.632 kg. |
| 11. | 156 | Chemicals & Allied Products Sl.No.A1168 | The norms covered by this entry shall be substituted by the following:- |
| A1168 | Silicon Carbide Grains | 1 MT | 1. Silicon Carbide Crude / Lumps (containing not less than 95% on Dry basis) | 1.15 MT |
| Note: The purity of export product shall not be lesser than the purity of imported item. |
| 12. | 160 | Chemicals & Allied Products Sl.No.A1216 | The note below this entry shall be deleted. |
| 13. | 162 | Chemicals & Allied Products Sl.No.A1232 | The description of import item 1 shall be corrected to read as under:
"Ethoxy Methylene Malonic Acid Ester (EMME)" |
| 14. | 169 | Chemicals & Allied Products Sl.No.A1332 | The description of the export product shall be corrected to read as under:-
"DV Acid Chloride / Cypermethric Acid Chloride". |
| 15. | 173 | Chemicals & Allied Products Sl.No.A1381 | Note below this entry shall be deleted. |
| 16. | 181 | Chemicals & Allied Products Sl.No.A1481 | After import item 1, the following alternative items with quantity shall be added:- |
"OR
1. Octamethyl Cyclo Tetrasilo Siloxane | 1.04 kg |
| 2. Siloxane 45-C | 1.04 kg |
| 3. Dimethyl Cyclic | 1.04 kg |
| 4. Hydrolizate | 1.04 kg |
| 17. | 183 | Chemicals & Allied Products Sl.No.A1500 | The Note below this entry shall be deleted. |
| 18. | 255 | Chemicals & Allied Products Sl.No.A1902 (Introduced vide Public Notice No.13 dated 5.6.97) | After this norm the following alternative import items with quantity shall be added:- |
OR
"1. Diethyl Phosphoro Chloride Thioate (DETCL) | 0.638 kg |
| 2. Orthochlorophenol (OCP) | 0.440 kg |
| 4. Propyl Bromide | 0.363 kg". |
| 19. | 255 | Chemicals & Allied Products Sl.No.A1926 (Introduced vide Public Notice No.21 dated 30.6.1997) | The norms covered by this entry shall be substituted by the following:- |
| A1926 | Lansoprasole Pellets 8.5% | 1 Kg. | 1. 2,3 Lutidine | 0.243 kg |
| 2. Trifluro Ethanol | 0.414 kg |
| 3. 2-Mercapto Benzimidazole | 0.068 kg |
| 4. Methylene Chloride | 1.06 kg |
| 5. Isopropyl Alcohol | 0.100 kg |
| 20. | 255 | Chemicals & Allied Products Sl.No.A1946 (Introduced vide Public Notice No.34 dated 22.8.97) | The norms covered by this entry shall be substituted by the following:- |
| A1946 | Insoluble Sulphur (67%) | 1 kg | 1. Sulphur | 0.73 kg |
| 2. Coating Oil | 0.33 kg |
| 21. | 255 | Chemicals & Allied Products Sl.No.A1955 (Introduced vide Public Notice No.43 dated 25.9.97) | After import item 3, following additional item with quantity shall be added:- |
| "4. Antioxidant (Di-tertiary Butyl Hydroxy Phenyl Propionate)" | Upto 1% of the weight of export. |
| 22. | 265 & 266 | Electronics Products Sl.No.B19 | After import item 8, against this entry the following item with quantity shall be added:- |
| "9. Miniature Tubular Ceramic Capacitor" | Net to net |
| 23. | 323 & 324 | Electronics Products Sl.No.B132 | 1. The description of import items 3 & 6 alongwith quantity shall be substituted by the following:- |
| "3. Case with or without Integrated Bracelet | 1 No. |
OR
Parts of Cases:
a)Bezel | 1 No. |
| b)Back Cover | 1 No. |
| c)Benzel Ring | 1 No. |
| d)Mineral Glass (Crystal) | 1 No. |
| e)Gaskets | 2 Nos. |
| f)Movement Holder | 1 No. |
| g)Case Pipe / Stem Pipe | 1 No. |
| h)Spring Bars | 2 Nos. |
| i)Crown$ | 1 No. |
| 6. Watch Straps / Bracelets | 1 No. |
OR
Parts of Straps:
a)Strap Links | 1 Lot |
OR
a)Leather Pads | 2 Nos. |
| b)Buckles | 1 No. |
| c)Clasps with Sliding Lock". | 1 No. |
| 2. After import item 6, following additional item with quantity shall be added:- |
| "7. Watch Glass | 1 No.". |
| 24. | 340 | Electronics Products Sl.No.B214 (Introduced vide Public Notice No.71 dated 19.2.98) | 1. The quantity of import item 10 shall be corrected to read "116.67 gms".
2. In the Note, below this norm, the period "31.3.1997" shall be amended to read as "30.6.98". |
| 25. | 377 | Engineering Products Sl.No.C204 | The import items 7 & 8 against this entry shall be deleted. |
| 26. | 390 | Engineering Products Sl.No.C254 | The norms covered by this entry shall be substituted by the following:- |
| C254 | PTFE Insulated Wires and Cables with conductor diameter more than 0.5mm | 1 kg | 1. Copper (Cathode /Wire Bar / Continuous Cast Rod / Wire / Alloy Wire) | 1.02 kg/kg of net content in the export product. |
| 2. PTFE Resin Fine Powder | 1.15 kg/kg of net content in the export product. |
| 3. Silver 99.9% Purity (Ingots / Shots / Powder) | 1.003 kg/kg of net content in the export product. |
| 4. Pigment, Ink, Silicone Fluid, Polyimide(Kapton), Low-noise Disper- sion, Tween-85, Synthetic Resin, Yarn Plain & Finished Sized including Glass Fibre Yarn, Finished Forms, Dispersions of Polymeric Resins | Upto 2% of the FOB value of exports. |
| 5. S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper / Copper Alloy / Copper covered Steel / Nickel / Resistance Alloys / Stainless Steel, Connectors Flat / Round / Coaxial, Terminations | Upto 2% of the FOB value of exports. |
| Note.1 Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and fornickel coated wires, nickel will be allowed. |
| 27. | 390 & 391 | Engineering Products Sl.No.C255 | The norms covered by this entry shall be substituted by the following:- |
| C255 | PTFE Insulated Wires with conductor diameter equal to or less than 0.5mm and PTFE Thickness less than 0.18mm | 1 kg | 1. Copper (Cathode / Wire Bar / Continuous Cast Rod / Wire / Alloy Wire) | 1.02 kg/kg of net content in the export product. |
| 2. PTFE Resin Fine Powder | 1.35 kg/kg of net content in the export product. |
| 3. Silver 99.9% Purity (Ingots / Shots / Powder) | 1.003 kg/kg of net content in the export product. |
| 4. Pigment, Ink, Silicone Fluid, Polyimide(Kapton), Low-noise Dispersion, Tween-85, Synthetic Resin, Yarn Plain & Finished Sized including Glass Fibre Yarn, Finished Forms, Dispersions of Polymeric Resins | Upto 2% of the FOB value of exports. |
| 5. S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper / Copper Alloy / Copper covered Steel / Nickel / Resistance Alloys / Stainless Steel, Connectors Flat / Round / Coaxial, Terminations | Upto 2% of the FOB value of exports. |
| Note.1 Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed. |
| 28. | 403 | Engineering Products Sl.No.C297 | 1. The description of the export product shall be amended to read as under:-
"Stamping (Stator & Rotor Sets) for Electric Motors"
2. The quantity of import item shall be amended to read as "2.20 kgs / kg content in the export product." |
| 29. | 459 | Engineering Products Sl.No.C483 | 1. The description of import item 3 alongwith quantity shall be amended to read as under:- |
| "3. Liquified Petroleum Gas | 86 kgs |
OR
Furnace Oil | 111 kgs". |
2. At the end of Note 1 below this entry, the following shall be added in continuation:-
"or Furnace Oil as required." |
| 30. | 459 & 460 | Engineering Products Sl.No.C484 | 1. The description of import item 2 alongwith quantity shall be amended to read as under:- |
| "2. Liquified Petroleum Gas | 86 kgs |
OR
Furnace Oil | 111 kgs". |
2. At the end of Note 1 below this entry, the following shall be added in continuation:-
"or Furnace Oil as required." |
| 31. | 470 | Engineering Products Sl.No.C508 | In the description of import item 1(ii), the alternative item "Naphtha" shall be deleted. |
| 32. | 490 | Engineering Products Sl.No.C536 | The description of import item 2 alongwith quantity shall be amended to read as under:- |
| "2. Plastic Gasket | Net to net. |
OR
LDPE Granules | 1.05 kg/kg weight of Gasket." |
| 33. | 491 | Engineering Products Sl.No.C544 | After import item 2, the following additional item with quantity shall be added:- |
| "3. Plastic Gasket | Net to net. |
OR
LDPE Granules | 1.05 kg/kg weight of Gasket." |
| 34. | 498 | Engineering Products Sl.No.C599 | The description of the export product shall be amended to read as under:-
"Clips for Railways - Elastic Rail Clips, Pandrol Clips, E. Clips and G. Clips". |
| 35. | 500 & 501 | Engineering Products Sl.Nos.C615, C617, C618 and C619 | The description of import item 1 against these entries shall be amended to read as under:-
"1. CRCA Sheet / Coil".
The quantity will remain unchanged. |
| 36. | 509 | Engineering Products Sl.No.C673 | The description of the import item against this entry shall be amended to read as under:-
"1. MS Sheet / Coil
OR
Stainless Steel Sheet / Coil".
The quantity will remain unchanged. |
| 37. | 526 & 527 | Engineering Products Sl.No.C791 | The quantity of import item 1 shall be amended to read as "2.0 MT". |
| 38. | 527 | Engineering Products Sl.No.C794 | The quantity of import item 1 shall be amended to read as "1.50 MT". |
| 39. | 533 | Engineering Products Sl.No.C831 | The norms covered by this entry shall be substituted by the following:- |
| C831 | Stainless Steel Seamless Tubes / Pipes (ColdFinished) | 1 MT | 1. Stainless Steel Tubes / Pipes (Hot Finished) (OD not less than 42mm) | 1.35 MT |
| 2. Consumables viz Band Saw Blades / Lubricating Oil | Upto 2% of FOB value of export. |
| 40. | 544 | Engineering Products Sl.No.C902 | After import item 2, following additional item with quantity shall be added:- |
| "3. Machine Screws | Net to net." |
| 41. | 546 | Engineering Products Sl.No. C919 | The norms covered by this entry shall be substituted by the following:- |
| C919 | Drilling Machine Accessories:-
a)Drill Rods / Core Barrels / Core Lifter / Coupling / Adapters / Core Lifter Case / Subs- titutes made out of Carbon Steel Seamless Tubes | 1 MT | 1. Seamless Carbon Steel Tubes / Steel Tubes / Drilling Tubes | 1.1 MT |
| b)Casing & Tubing Pipes | 1000 Mtrs. | 1. Plain and Seamless Pipes | 1055 Meters |
| 42. | 550 | Engineering Products Sl.No.C947 | The description of the import item 1 shall be amended to read as under:-
"1. Permanent Magnet Strontium Ferrite Grade". |
| 43. | 551 | Engineering Products Sl.No.C951 | The norms covered by this entry shall be substituted by the following:- |
| C951 | Saws / Segments made from High Speed Steel Strips / Sheets including Bimetal & Flexible | 1 kg | 1. High Speed Steel and Bimetal Strips / Sheets | 1.20 kg |
| 44. | 568 | Engineering Products Sl.Nos.C979 & C980 | After import item 3 against these entries, the following additional item with quantity shall be added:- |
| "4. Grinding Wheel, Diamond / Abrasive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt" | Upto 3% of FOB value of export. |
| 45. | 581 & 582 | Engineering Products Sl.No.C1035 | The norm covered by this entry shall be substituted by the following:- |
| C1035 | Single Cylinder Fuel Injection Pump for Diesel Engines | 1 No. | A. RAW MATERIALS: 1. Alloy Steel Bars / Coil to specification SAE 52100 or equivalent | 2.86 kg/kg content in export. |
| 2. Alloy Steel Bars / Coil to specification SAE 3415 or 16Mn CrS5 or equivalent | 3.28 kg/kg content in export. |
| 3. Pig Iron | 1.40 kg/kg content in export. |
| 4. Free Cutting Leaded / Non Leaded Bars / Coils including Ultrasonically tested Steel or equivalent | 2.11 kg/kg content in export. |
| 5. Steel to specification EN 8M or VS 13113 or equivalent | 3.22 kg/kg content in export. |
| 6. Spring Steel | 1.11 kg/kg content in export. |
B. COMPONENTS:
7. Element
8. Delevery Valve
9. Compression Spring
10. O Ring
11. Round Head Grooved Screw
12. Guide Plate
13. Protective Cap
14. Clamping Ring
15. Pin
16. Fillister Head Screw
17. Spring Seat
18. Guide Pin
19. Plug
20. Spring Ring
21. Filler Piece
22. Eccentric Bolt
23. Gasket
24. Sleeve
25. Control Rod
26. Roller
27. Roller Tappet Body
28. Control Sleeve
29. Retaining Ring
30. Eccentric Pin
31. Screw Plug | Net to net. |
C. CONSUMABLES:
32. CNB / Diamond Honing Stick Blanks / Support Stone / Deburrring Tools
33. Hone Holders
34. Plain Grinding Wheels / Disc. Wheels for Lap / Match Grinding / CBN Wheels
35. Carbide End Mills / Tools
36. Gem Shaper
37. Diamond Dresser
38. Deep Hole Drills
39. Reamers
40. Oil Stones
41. Broaches
42. Drills
43. Calibration Fluid / Test Oil | Upto 3% of FOB value of export. |
| 46. | 642 | Engineering Products Sl.No.C1298 (Introduced vide Public Notice No.34 dated 22.8.97) | The quantity of import item 1 shall be amended to read as "1.33 MT ". |
| 47. | 651 | Food Products Sl.No.E38 | The quantity of import item 3 shall be amended to read as under:-
"2 gms.Sack of minimum 25 kgs capacity". |
| 48. | 651 | Food Products Sl.No.E41 | The norms covered by this entry shall be substituted by the following:- |
| E41 | Salt packed in HDPE / LDPE / PP Woven Sacks having minimum capacity of 25 kgs | 1 kg | 1. HDPE / PP Granules | 1.10 kg/kg content in the export product. |
| 2. LDPE Granules | 1.05 kg/kg content in the export product. |
| 3. Printing Ink | 2 gms / sack |
| 49. | 652 & 653 | Food Products Sl.No.E49 | The quantity of import item 5 shall be amended to read as under:-
"2 gms.Sack of minimum 25 kgs capacity". |
| 50. | 659 & 660 | Leather & Leather Products Sl.Nos.G1 & G2 | The import item 1(a) against these entries shall be amended to read as under:-
"1. (a)Outer Lining (Polyester / Nylon / Viscose / Cotton Fabric Cowry / Blended Fabrics / Wool Synthetic Lining) - (only the relevant items used / to be used in export is to be allowed for import)". |
| 51. | 742 & 743 | Plastic Products Sl.No.H113 | 1. The description of the export product shall be amended to read as under :
"HDPE Woven sacks laminated / coated with / without liner."
2. Below this entry, the following Note shall be added:-
"Note: The item 3 above will be allowed only in case the export product is with Liner". |
| 52. | 743 | Plastic Products Sl.No.H115 | The norms covered by this entry shall be substituted by the following:- |
| H115 | HDPE / PP Beautycase / Briefcase / Suitcases with / without Aluminium Frame of all sizes HDPE / PP / LDPE | 1 No. | 1. Granules of Relevant Polymer for manufacture of main body / Components | 1.05 kg/kg content in export. |
| 2. PVC Compound | 1.05 kg/kg content in export. |
| 3. Aluminium Sheet / Strips | 1.05 kg/kg content in export. |
| 4. Combination Lock / Number Lock/Side Lock / parts thereof | Net to net. |
| 5. Relevant Lining (Rayon / Polyester / Nylon / Polypropylene | 1.10 Sq. Mtr / Sq.Mtr content in export. |
| 6. Carrying Handle | Net to net. |
| 7. Handle Lugs | Net to net. |
| 8. Pulling Handle | Net to net. |
| 9. Glue Foil | 1.05 kg/kg content in export. |
| 10. Kraft Paper / Board for Lining / Divider | 1.05 kg/kg content in export. |
| 11. Relevant Metallic / Non-Metallic Components | Net to net. |
| 12. Extruded Flexible Plastsic Profiles | 1.02 Mtr / Mtr content in export. |
| 13. Relevant Zip Fastener | Net to net. |
| Note: In case of export of coloured items, the relevant colour Master Batch may be allowed as an input @0.02 kg/kg weight of Polymer. In case Colour Master Batch is imported, then relevant Polymer at item 1 wil be reduced to 1.03 kg/kg content in export product. |
| 53 | 760 | Plastic Products Sl.No.H194 | The norms covered by this entry shall be substituted by the following:- |
| H194 | Plastic Shaving / Household Brush | 1 kg | 1. Relevant Nylon / PP Monofilament Bristles | 1.05 kg/kg content in the export product. |
| 2. Relevant Polymers like ABS Granules / PP Granules / HIPS Granules | 1.05 kg/kg content in the export product. |
| 3. Relevant Dyes | Upto 1% weight of Polymer content at 1 above. |
| Note.1 Only the relevant item required will be allowed to be imported. |
| 54. | 791 & 792 | Plastic Products Sl.No.H325, H326 & H327 | The norms covered by these entries shall be deleted. |
| 55. | 798 | Sports Goods Sl.Nos.I14 & I15 (Introduced vide Public Notice No.43 dated 25.9.97) | 1. The quantity of import item 1, mentioned against these entries shall be ammended to read as "0.20 Sq.Mtr" and "0.18 Sq.Mtr." respectively.
2. After Sl.No.I15, the following Note shall be added:
"Note: In respect of Sl.No.I13 to I15, the thickness of PVC Leather cloth to be allowed for import would be of 1.2 mm to 1.6 mm". |
| 56. | 799 | General Note for Textiles Note.2 | The percentage limit of "2%" allowed in this Note shall be amended to read as "5%". |
| 57. | 836 | Textile Products Sl.No.J137 | The norms covered by this entry shall be substituted by the following:- |
| J137 | Anoraks | 1 No. | 1. PU / PVC Coated Nylon / Polyester Fabric | 3.20 Sq.Mtr. |
| 2. Reflective Fabric in 2" width | Net+0.5% |
| 3. PU / PVC Fusing / Sealing Tape in 20mm width | Net+0.5%. |
| 4. Nylon Zippers | Net to net. |
| 5. Metal Studs | Net to net. |
| 6. Polyester Thread | 200 Mtrs. |
| 7. Labels | Net to net. |
| 58. | 858 & 859 | Miscellaneous Products Sl.No.K23 | In import item 1, the following alternative item with quantity shall be added:- |
"OR
Relevant Synthetic Lining | 1.05 Sq.Mtr /Sq.Mtr content in the export product." |
| Sl. No. | Export Item | Import Item |
| Name | Qty. | Name | Qty. |
| (1) | (2) | (3) | (4) | (5) |
|---|
| A2027 | Cefatoxime Sodium | 1 kg | 1. 7 ACA | 0.81 kg |
| 2. Mercapto Benzo Thiazole-4-YL-2- (2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM) | 1.12 kg |
OR
2. i)Ethyl Aceto Acetate | 2.06 kgs |
| ii)Potassium Carbonate | 2.18 kgs |
| iii)Bromine | 1.96 kg |
| iv)Triphenyl Phosphine | 1.23 kg |
| v)Vulkacit Acid | 1.56 kg |
| 3. Methylene Chloride | 5.68 kgs |
| 4. Isopropyl Alcohol | 5.12 kgs |
| 5. Acetone | 1.65 kg |
| 6. Methanol | 5.72 kgs |
| 7. Formic Acid | 1.30 kg |
| 8. Triethyl Amine | 0.45 kg |
| 9. Ethyl Hexanate /2-Ethyl Hexanic Acid | 0.44 kg |
| A2028 | (3S) 1,2,3,4 Tetra Hydro Isoquinolin- 3 Carboxylic Acid | 1 kg | 1. L-Phenyl Alanine | 1.30 kg |
| 2. Paraformaldehyde | 0.36 kg |
| 3. Hydrobromic Acid 48% | 5.16 kgs |
| 4. Isopropyl Alcohol | 0.80 kg |
| A2029 | 4-Benzyloxy-Alpha-Bromo Propio- phenone | 1 kg | 1. Phenol | 0.47 kg |
| 2. Propionyl Chloride | 0.47 kg |
| 3. Benzyl Chloride | 0.50 kg |
| 4. Bromine | 0.60 kg |
| 5. Potassium Carbonate | 0.553 kg |
| 6. Dichloro Methane | 3.25 kgs |
| A2030 | Phenidone (1-Phenyl, 3-Pyrazolidone) | 1 kg | 1. Aniline | 1.12 kg |
| 2. Acrylamide | 0.54 kg |
| 3. Sodium Nitrite | 0.83 kg |
| 4. Sodium Hydroxide | 1.92 kg |
| A2031 | Covered Rubber Thread (Elastic Yarn | 1 kg | 1. Heat Resistant Rubber Thread | 0.5 kg |
| 2. Nylon / Polyester Yarn (Relevant) | 0.5 kg |
| A2032 | Lansoprazole (bulk drug) | 1 kg. | 1. 2,3 Lutidine | 2.80 Kg. |
| 2. Trifluro Ethanol | 4.87 Kg. |
| 3. 2-Mercapto Benzimidazole | 0.80 Kg. |
| 4. Methylene Chloride | 12.5 Kg. |
| 5. Isopropyl Alcohol | 1.25 Kg. |
| A2033 | Albendazole Sulphoxide | 1 kg | 1. N-Propyl Bromide | 1.20 kg |
| 2. Hydrogen Cynamide 50% Solution | 1.024 kg |
| 3. Methyl Chloro formate | 3.585 kgs |
| 4. Di-Methyl Sulphoxide | 2.00 kgs |
| 5. Iso Propyl Alcohol | 8.25 kgs |
| 6. N-Propanol | 6.766 kgs |
| A2034 | Dry Choline Chloride 75% Aquous (Animal Feed Supplement) | 1 kg | 1. Ethylene Oxide | 0.251 kg |
| 2. Trimethyl Amine | 0.337 kg |
| A2035 | Dry Choline Chloride 60% Cereal Base | 1 kg | 1. Ethylene Oxide | 0.203 kg |
| 2. Trimethyl Amine | 0.272 kg |
| A2036 | 1-Phenyl Piperazine | 1 kg | 1. Aniline | 1.67 kg |
| 2. BIS(2-Chloro Ethyl) Amine Hydrochloride | 3.36 kgs |
| 3. Caustic Soda Flakes | 1.72 kg |
| A2037 | Pigment Yellow 127 (Pigment content 98%) | 1 kg | 1. Aceto Acet Meta Xylidide | 0.460 kg |
| 2. Aceto Acet Ortho Anisidide | 0.144 kg |
| 3. Sodium Nitrite | 0.214 kg |
| 4. Caustic Soda Flakes | 0.614 kg |
| 5. Acetic Acid | 0.231 kg |
| A2038 | Silicon Rubber Compound | 1 kg | 1. Octamethylcyclo-tetrasiloxane | 0.644 kg |
| 2. Fumed Silica | 0.192 kg |
| A2039 | Injection Moulding High Impact Polystyrene Razor Handles | 1 kg | 1. High Impact Polystyrene Granules | 1.03 kg |
| 2. Relevant Colour Master Batch | 0.02 kg |
| A2040 | 3,4 Dichloro Aniline | 1 kg | 1. 3,4 Dichloro Nitro Benzene | 1.40 kg |
| 2. Formic Acid | 0.32 kg |
| 3. Mono Chloro Benzene | 0.20 kg |
| A2041 | Diazinon 14% Granules | 1 kg | 1. Diazinon Technical 95% Active Ingradient | 0.141 kg |
| A2042 | Methanation Catalyst | 1 kg | 1. Nickel Metal Unwrought | 0.214 kg |
| 2. Special Grade Alumina Powder | 0.278 kg |
| A2043 | 6 Chloro 2,4 Dinitro Aniline | 1 kg | 1. 2,4 Dinitro Chloro Benzene | 1.302 kg |
| A2044 | Acid Black 10 BX (C.I.Acid Black 1) (Dye content-82%) | 1 kg | 1. Para Nitro Aniline | 0.193 kg |
| 2. H-Acid | 0.403 kg |
| 3. Aniline | 0.121 kg |
| 4. Sodium Nitrite | 0.188 kg |
| A2045 | N-Amino Ketone Hydrochloride | 1 Kg. | 1. Phenol | 1.285 Kg |
| 2. Propionyl Chloride | 0.625 Kg |
| 3. Benzyl Chloride | 0.665 Kg |
| 4. Liquid Bromine | 0.80 Kg |
| 5. Potassium Corbonate | 1.46 Kg |
| 6. Di-chlore Methane | 7.90 Kg |
| 7. Methyl Ethyl Ketone | 6.66 Kg |
| A2046 | Cinnarizine EP Grade | 1 kg | 1. Benzophenone | 1.26 kg |
| 2. Sodium Borohydride | 0.15 kg |
| 3. Piperazine Anhydrous | 1.31 kg |
| 4. Cinnamic Alcohol | 0.527 kg |
| 5. Methyl Ethyl Ketone | 1.00 kg |
| A2047 | Sodium Sulphite | 1 kg. | 1. Soda Ash | 0.938 kg |
| A2048 | Soder Berg Paste | 1 kg | 1. Raw Petroleum Coke | 1.003 kg |
| A2049 | 1(4-Methoxyphenyl) Piperazine | 1 kg | 1. Para Anisidine | 1.66 kg |
| 2. BIS(2-Chloro Ethyl) Amine Hydrochloride | 2.39 kgs |
| 3. Potassium Hydroxide | 1.30 kg |
| A2050 | N-Phenyl-N-Chloro Acetyl-2,6-Di-chloro Aniline OR N-(Chloro Acetyl)-N-Phenyl-2,6-Di-chloro Aniline (DC-2) | 1 kg | 1. Phenol | 1.75 kg |
| 2. Per Chloro Ethylene | 3.06 kgs |
| 3. Aniline | 0.50 kg |
| 4. Potassium Carbonate | 0.37 kg |
| 5. Isopropyl Alcohol | 1.00 kg |
| A2051 | Choline Bitartrate - NF | 1 kg | 1. D.L. Tartaric Acid | 0.992 kg |
| 2. Trimethyl Amine Solution (30%) | 1.18 kg |
| 3. Ethylene Oxide | 0.265 kg |
| A2052 | Tolclophos Methyl | 1 kg | 1. Paracresol | 0.503 kg |
| 2. O,O Dimethyl Thiophosphoryl Chloride (DMTC) | 0.651 kg |
| A2053 | 4-Fluro Phenol (Minimum 97%) | 1 kg | 1. Para Fluro Nitro Benzene | 1.89 kg |
OR
1. Para Fluro Aniline | 1.34 kg |
| A2054 | Morniflumate | 1 kg | 1. 3-Cyanopyridine | 1.79 kg |
| 2. Hydrogen Peroxide | 1.75 kg |
| 3. Phosphorous Oxychloride | 4.34 kgs |
| 4. M-Amino Bensotri-fluoride | 0.90 kg |
| 5. 2-Morpholine Ethanol | 0.65 kg |
| 6. Thionyl Chloride | 0.62 kg |
| 7. Methanol | 0.66 kg |
| 8. Toluene | 2.32 kgs |
| 9. Hexane | 2.32 kgs |
| 10. Isopropyl Alcohol | 2.03 kgs |
| A2055 | Phenol (Cardanol) | 1 kg | 1. Hydroquinone | 0.005 kg |
| A2056 | Fumagillin DCH Salt | 1 kg | 1. Dicyclo Hexyl Amine | 0.44 kg |
| 2. Acetone | 15.75 Ltrs. |
| A2057 | Heavy Duty Rubber Mountings for Trucks, Buses and Cars with Antirust Coatings | 1 kg | 1. M.S. C.R.C.A. / H.R. Sheets / Coils / Rods / Seconds / Defective | 1.10 kg/kg content in the export product. |
2. Inputs for 1 kg Rubber Compound in the export product:
i)Natural Rubber | 0.100 kg |
| ii)Synthetic Rubber NBR | 0.600 kg |
| iii)Carbon Black | 0.098 kg |
| iv)Rubber Chemicals viz. Anti-oxidants, Acce-lerators, Retar-ders, Peptizers | 0.028 kg |
| v)Miscellaneous Chemicals viz. Curing Agents, Activators, Silicone Oil, Stearic Acid, Plasticizers, Microcrystallin Wax, Filler | 0.056 kg |
| 3. Bonding Agent Primer / Adhesive | 0.020 kg |
| 4. Anti-rust Primer / Coating | 0.020 kg |
Note 1. The CIF value of Rubber Chemicals should not exceed 7% of FOB value of exports.
2. The CIF value of Miscellaneous Chemicals should not exceed 5% of FOB value of exports. |
| A2058 | Iso C Acid (2-Naphthylamine 3.4 Disulfonic Acid) | 1 kg | 1. Tobias Acid | 1.342 kg |
| A2059 | Metamitron Technical (98% Minimum Purity) | 1 kg | 1. Hydrazine Hydrate (80%) | 1.278 kg |
| 2. Aluminium Chloride | 1.36 kg |
| 3. Ethyl Acetate | 0.81 kg |
| 4. Ethanol | 1.00 kg |
| 5. Benzene | 1.04 kg |
| A2060 | Molybdenum Disulphide | 1 kg | 1. Molybdenum Ore concentrate | 1.30 kg |
| A2061 | Blend of Aromatic Polyester Polyols, Amino Polyols | 1 kg | 1. Phthalic Anhydride | 0.254 kg |
| 2. Diethylene Glycol | 0.388 kg |
| 3. Diethanol Amine | 0.123 kg |
| 4. Nonyl Phenol | 0.102 kg |
| 5. Glycerine | 0.025 kg |
| 6. Dimethyl Cyclohexyl Amine | 0.013 kg |
| 7. Surfactant | 0.011 kg |
| A2062 | Steel Cord Re-in forced Conveyor Belt of relevant Natural / Synthetic Rubber | 1 MT | 1. Steel Cord | 1.10 kg/kg content in the export product. |
2. Inputs for 1 MT of the relevant rubber compound in the export product:
a)Relevant Natural / Synthetic Rubber depending upon the product like exported | 525 kgs |
| b)Carbon Black | 273 kgs |
| c)Rubber Chemicals such as Antioxidant, Accelerator, Retardent, Fire Retardent, Peptizer / Fillers | 21 kgs |
| 3. Miscellaneous Chemicals such as Softner, Stearic Acid Plasticiser, Vulkanising Agent, Processing Aid, Tackifier, Synthetic Resin, Anti-ozonant, Release Agent | 36 kgs |
Note. 1. The CIF value of Rubber Chemicals shall not exceed 7% of FOB value of export.
2. The CIF value of Miscellaneous Chemicals shall not exceed 5% of FOB value of export.
3. Out of the total quantity of Natural / Synthetic Rubber allowed for import at item No.2(a), the differentpercentage of Synthetic Rubber to be allowed as per the following:- |
| Sl. No. | Export Item | Import Item |
| Name | Qty. | Name | Qty. |
| (1) | (2) | (3) | (4) | (5) |
|---|
| C1329 | Cultivator (Shear) | 1 kg | 1. Profile Steel Bar | 1.05 kg/Kg content in export. |
| C1330 | Brass Lamp Caps | 1 kg | 1. Brass Scrap | 1.10 kg/kg content in export. |
| C1331 | Knives & Cutting Blades for Machine or for mechanical appliances (Centre Blade and Peanut Blade size 46-1/4" and 42" length) | 1 kg | 1. Alloy Steel Flat Bars | 1.25 kg/kg content in the export product. |
| C1332 | Spheroidal Graphite quality Rolls for Rolling Mills - Fe-88.7%, C-3.5%, Si-2.0%,Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016%(Maximum) & P-0.15%(Maximum) | 1 MT | 1. M.S. Scrap | 1512.72 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 51.82 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 32.91 kgs |
| 4. Nickel | 69.09 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 17.87 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 30.18 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Bantanite Green Bond (Prepared Binders) | 12.00 kgs |
| 9. Nickel Magnesium (Ni - 78-82%, Mg - 16-18% and MM - 0.7-1.2%) | 22.10 kgs |
| 10. Ferro Silicon Magnesium (Si - 50-60%, Mg - 8-10% and Fe - Balance) | 22.10 kgs |
| 11. Graphite Electrodes | 9.50 kgs |
| 12. Ramming Mass | 20.00 kgs |
| 13. Melted Flux | 5.00 kgs |
| 14. Calcium Silicide | 1.11 kg |
| 15. Flourspar (Flux) | 66.31 kgs |
| 16. Porous Plug (Laddle) | 0.20 No. |
| 17. CBN Tips | 5.93 Nos. |
| C1333 | Steel Quality Rolls for Rolling Mills - Fe-93.8%, C-1.8%, Si-1.0%, Mn-1.0%, Ni-0.6%, Cr-1.4%, Mo-0.4%, S-0.04%(Maximum) & P-0.04%(Maximum) | 1 MT | 1. M.S. Scrap | 1624.64 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 25.98 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 36.36 kgs |
| 4. Nickel | 10.91 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 42.42 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 12.13 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Bantonite Green Bond (Prepared Binders) | 12.50 kgs |
| 9. Flourspar | 80.67 kgs |
| 10. CBN Tips | 5.93 Nos. |
| 11. Graphite Electrodes | 9.50 kgs |
| 12. Porous Plug | 0.20 No. |
| 13. Ramming Mass | 20.00 kgs |
| 14. Melted Flux | 12.50 kgs |
| 15. Calcium Silicide | 2.30 kg |
| 16. Ferro Aluminium | 1.15 kgs |
| C1334 | Alloy IC Quality Rolls for Rolling Mills - Fe-90.9%, C-3.3%, Si-1.6%, Mn-1.2%, Ni-2.4%, Cr-1.1%, Mo-0.5%, S-0.1%(Maximum) & P-0.3%(Maximum) | 1 MT | 1. M.S. Scrap | 1547.85 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 41.56 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 43.64 kgs |
| 4. Nickel | 43.64 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 33.33 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 15.15 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Flourspar | 67.66 kgs |
| 9. CBN Tips | 5.93 Nos. |
| 10. Graphite Electrodes | 9.50 kgs |
| 11. Porous Plug | 0.20 No. |
| 12. Ramming Mass | 20.00 kgs |
| 13. Calcium Silicide | 1.12 kg |
| C1335 | ICDP Qualaity Rolls for Rolling Mills containing Shell - Fe-88.7%, C-3.5%, Si-2.0%, Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016% & P-0.15% & Core - Fe-93.4%, C-3.5%, Si-2.0%, Mn-0.5%, Ni-0.4%, Cr-0.2%, Mo-Nil, S-0.08% & P-0.1% | 1 MT | 1. M.S. Scrap | 1758.81 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 42.22 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 31.82 kgs |
| 4. Nickel | 54.83 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 40.91 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 7.58 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Bantanite Green Bond (Prepared Binders) | 12.50 kgs |
| 9. Flourspar | 68.32 kgs |
| 10. CBN Tips | 5.93 Nos. |
| 11. Graphite Electrodes | 9.50 kgs |
| 12. Ramming Mass | 20.00 kgs |
| 13. Calcium Silicide | 1.14 kg |
| C1336 | Hi-Crome Quality Rolls for Rolling Mills containing Shell - Fe-73.8%, C-3.0%, Si-1.0%, Mn-1.2%, Ni-1.5%, Cr-18%, Mo-1.5%, S-0.02% & P-0.06% & P-0.06%(Maximum) & Core - Fe-92.6%, C-3.2%, Si-2.0%, Mn-0.5%, Ni-1.3%, Cr-0.4%, Mo-Nil,Bond S-0.02% & P-0.06% | 1 MT | 1. M.S. Scrap | 1478.62 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 46.58 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 36.37 kgs |
| 4. Nickel | 28.87 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 346.98 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 28.41 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Bantanite Green (Prepared Binders) | 13.46 kgs |
| 9. Nickel Magnesium (Ni - 78.82%, Mg - 16.18% and MM - 0.7-1.2%) | 14.02 kgs |
| 10. Flourspar | 59.60 kgs |
| 11. CBN Tips | 5.93 Nos. |
| 12. Graphite Electrodes | 9.50 kgs |
| 13. Ramming Mass | 20.00 kgs |
| C1337 | NM(H) Quality Rolls for Rolling Mills - Fe-92.1%, C-3.7%, Si-0.5%, Mn-0.4%, Ni-2.5%, Cr-0.6%, Mo-0.2% | 1 MT | 1. M.S. Scrap | 1620.67 kgs |
| 2. Ferro Silicon (Si - 70-75%) | 12.98 kgs |
| 3. Ferro Manganese (Mn - 50-62%) | 14.55 kgs |
| 4. Nickel | 45.45 kgs |
| 5. Ferro Chrome (Cr - 60-70%) | 18.18 kgs |
| 6. Ferro Molybdenum (Mo - 60-70%) | 6.05 kgs |
| 7. Furnance Oil | 500 Ltrs. |
| 8. Ferro Phosphorous | 426.40 kgs |
| 9. Flourspar | 56.11 kgs |
| 10. Ferro Sulphur | 59.21 kgs |
| 11. CBN Tips | 5.93 Nos. |
| 12. Graphite Elec | 9.50 kgs |
| C1338 | Cold Formed Metal Section | 1 kg | 1. Cold Rolled Coil | 1.02 kg |
| C1339 | Brass Cup Annealed | 1 kg | 1. Brass Strip | 1.05 kg/kg content in the export product. |
| C1340 | Auto Gate Latch, Ring Gate Latch, Ring Handle & Hand Rail Bracket | 1 kg | 1. CRCA Sheet | 1.05 kg/kg content in the export product. |
| 2. M.S. Rod | 1.05 kg/kg content in the export product. |
| C1341 | 100 CC Motorcycle (2 Stroke Petrol Engine) in CKD / SKD / CBU condition | 1 No. | 1. CRCA Steel Sheet | 1.02 kg/kg content in the export product. |
| 2. Polyurethene Sheet | 1.01 kg/kg content in the export product. |
| 3. Aluminium Alloy Ingot | 1.05 kg/kg content in the export product. |
| 4. Unwrought Unalloyed Electrolytic Nickel | 1% of weight of steel to be electro plated. |
| 5. Oil Pump Assembly | Net to net. |
| 6. Kick Shaft Assembly | Net to net. |
| 7. Driven Gear Components | Net to net. |
| 8. Gear Primary Drive | Net to net. |
| 9. Fork Shift-I | Net to net. |
| 10. Fork Shift-II | Net to net. |
| 11. Fork Shift-III | Net to net. |
| 12. Carburettor Assembly LH | Net to net. |
| 13. Bulb Head Lamp | Net to net. |
| 14. Needle Roller Bearing (22mmX28mmX16mm) | Net to net. |
| 15. Needle Roller Bearing (14mmX18mmX16.5mm) | Net to net. |
| 16. Supressor Resistor KOA 5K Ohms PCN 1/2 | Net to net. |
| 17. Bulb (6V-21/5W) | Net to net. |
| 18. Bulb (6V-10W) | Net to net. |
| 19. Bulb (6V-2W) | Net to net. |
| 20. Rectifier Regulator Unit | Net to net. |
| C1342 | Automatic Voltage Stabilisers / Servo Control Voltage Stabilisers (upto 5 KVA Capacity) | 1 kg | 1. CRCA Sheet | 1.05 kg/kg content in the export product. |
| 2. CRGO Silicon Steel Sheet | 1.05 kg/kg content in the export product. |
| 3. Super Enamelled Copper Wire / Electrolytic Copper Wire Rod | 1.01 kg/kg content in the export product. |
| 4. Carbon Brush Blocks | 1.10 kg/kg content in the export product. |
| 5. Light Emitting Diodes | Net to net. |
| 6. Transistors | Net to net. |
| 7. Diodes | Net to net. |
| 8. Capacitors | Net to net. |
| 9. Resistors | Net to net. |
| C1343 | Typewriter(Manual) with ABS Casing | 1000 Nos. | 1. Mild Steel Strips | 7250 kgs |
| 2. Manganese Chrome Steel Strips | 702 kgs |
| 3. Spring Steel Strips | 150 kgs |
| 4. Mild Steel Bars / Wire | 920 kgs |
| 5. Stainless Steel Sheet | 160 kgs |
| 6. Aluminium Alloy (EM-6, LM-24) | 4700 kgs |
| 7. Zinc Ingot | 500 kgs |
| 8. ABS Granules | 120 kgs |
| 9. Type Sets | Net + 1% wastage. |
| C1344 | Tin Anodes (99.85% Purity) | 1 MT | 1. Tin Ingot | 1.01 MT |
| Sl. No. | Export Item | Import Item |
| Name | Qty. | Name | Qty. |
| (1) | (2) | (3) | (4) | (5) |
|---|
| H371 | Thermoplastic Polyurethane DESMOPAN 385 | 1000 kgs | 1. Polyester Polyols | 686 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 285 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 72 kgs |
4. ANOX M-20
4. ANOX 20 AM (Phenolic Anti- oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 4 kgs |
| 6. LOXAMID EBS (N,N-Ethylene -Bis - Steramide | 4 kgs |
| OR |
| H371 | Thermoplastic polyurethane DESMOPAN 385 | 1. Adipic Acid | 494 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 285 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 408 kgs |
| 4. ANOX M-20 (Phenolic Anti-oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 4 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 4 kgs |
| H372 | Thermoplastic Polyurethane DESMOPAN 191 | 1000 kgs | 1. Polyester Polyols | 784 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 261 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 41 kgs |
| 4. ANOX 20 AM (Phenolic Anti-oxidants) | 5 kgs |
| 5. STABAXOL - 1 (Carbodimide) | 3 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 12 kgs |
| 7. VANOX-12/P.P. Diphenyl Amine | 5 kgs |
| H373 | Thermoplastic Polyurethane DESMOPAN 192 | 1000 kgs | 1. Polyester Polyols | 606 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 338 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 97 kgs |
| 4. ANOX M-20 (Phenolic Anti-oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 4 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 6 kgs |
OR
1. Adipic Acid | 436 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 338 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 394 kgs |
| 4. ANOX M-20 (Phenolic Anti-oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 4 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 6 kgs |
| H374 | Thermoplastic Polyurethane DESMOPAN 359 | 1000 kgs | 1. Polyester Polyols | 444 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 472 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 151 kgs |
| 4. ANOX M-20 (Phenolic Anti-oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 2 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 3 kgs |
OR
1. Adipic Acid | 320 kgs |
| 2. MDI / Desmodor Trial product fused (PU 0118 Fused) | 472 kgs |
| 3. Butane Diol 1,4 1,4 BDO | 369 kgs |
| 4. ANOX M-20 (Phenolic Anti- oxidants) | 1 kg |
| 5. STABAXOL - 1 (Carbodimide) | 2 kgs |
| 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide | 3 kgs |
| H375 | Modified PPO(PPE) Compounds | 1 kg | 1. PPO Resin | 0.530 kg |
| 2. High Impact Poly-styrene | 0.347 kg |
| 3. Resorcinol | 0.127 kg |
Note.1 The export product is unreinforced flame retardant grade.
2. The above export product contains 50%+/-1% PPO and 33%+/-1% High Impact Polystyrene. Any variation in the ratio, the quantity may be worked out on pro-rata basis. |
| H376 | PC / ABS Alloy | 1 kg | 1. PPO Resin | 0.520 kg |
| 2. High Impact Poly-styrene | 0.347 kg |
| 3. Resorcinol | 0.127 kg |
Note.1 The export product is unreinforced grade.
2. The above export product contains 73%+/-1% PC and 14.5%+/-1% SAN and 12.5%+/- 1% ABS. Any variation in the ratio, the quantity may be worked out on pro-rata basis. |
| H377 | Nylon 6/66 Compounded Chips | 1 kg | 1. Relevant Nylon 6/ 66 Chips | 1.03 kg/kg content in the export product. |
| H378 | Silicone Compound C" | 1 kg | 1. Low Molecular Weight Silanol Octamethylcyclo- tetrasiloxane Siloxane C-45 Octamethylcyclic Hydrolisate | 0.364 kg |
| H379 | Polyester Buttons | 1 kg | 1. Polyester Resin | 1.05 kgs |
| H380 | Laminated Poly ethylene Tarpaulins containing 65%+/-3% Fabric and 35%+/-3% Laminating Resins (Minimum width X Length 9 Feet X 9 Feet) | 1 kg | 1. Polyethylene Unlaminated Fabric 50-130 GSM width not exceeding 2.1 Meter | 0.715 kg |
| 2. LDPE Granules (Lamination Grade) | 0.350 kg |
| 3. LDPE Colour Master Batch | 0.0175 kg |
| 4. UV Stabilisers | 0.0175 kg |
| 5. Aluminium Eyelets (Gromets) | Net+1% wastage. |
Note 1. The above norms are for laminated polyethylene tarpaulin having 65% of unlaminated fabric and 35% weight of lami-nating resin (Quantity allowed together at Sl.Nos.2,3&4).
2. For variations in weight of unlaminated fabrics, the quantity at Sl.No.1 and for laminating resin the quantity of input at Sl.Nos.2 to 4 may be worked out on pro-rata basis. |
| H381 | Tensioner Combination (made out of Polycarbonate) | 1 kg | 1. Polycarbonate Granules | 1.05 kg/kg content in the export product. |
| H382 | Fibreglass Tissue Reinforced with Fibreglass Yarn with UF/PF Resin content Min. 17% | 1 MT | 1. Chopped Strand of Fibreglass (Moisture content Minimum 13.5%) | 1.225 MT/MT content in the export product. |
| 2. Fibreglass Yarn | 1.09 MT/MT content in the export product. |
| 3. Natrosol (Hydroxy Ethyl Cellulose) | 11.60 kgs |
| 4. Myacide (2-Bromo-2-Nitropropane 1-3 Diol) | 1.61 kgs |
| 5. Aerosol | 0.30 kgs |
| 6. Formaline (37%) | 385.00 kgs |
| 7. Hemopur (Solution of Stabilised Chlorine Dioxide) | 4.97 kgs |