TRADE NOTICE NO. 09/AM05, DATE 03/12/2004
Submission of information in conformity with provisions contained in Annexure I to Appendix 10 of Hand Book of procedures (Vol.I) in respect of applications for grant of Advance Licences under Para 4.7 of Hand Book of Procedures (Vol.I).
Attention of trade is invited to Trade Notice No.20 dated 19.02.2003 dealing with streamlining of procedure for licensing under Para 4.7 of Hand Book of Procedures (Vol.I) 2002-2007.
Advance Licensing Committee has observed that the sets submitted by the applicants are not in conformity with the Annexure-I to Appendix 10 of Hand Book of Procedures (Vol.I).
The nature of deficiencies noticed while examination of cases by ALC is as below:
(1) For the products falling under the categories of “Chemicals & Allied Products” & “Plastics”, the documents prescribed in Annexure-I to Appendix 10 are not enclosed by the party with the sets.
(2) Self-certified copy of valid Drug Manufacturing Licence, wherever applicable is invariably not submitted with the application.
A copy of the latest Annexure-I to Appendix 10 of Hand Book of Procedures (Vol.I) is enclosed to this Trade Notice. To this extent the contents of Part III of Annexure-I to the Trade Notice No.20 dated 19.02.2003 may be treated to have been revised as per Annexure-I to this Trade Notice.
The members of Trade are requested to submit complete information as per the same otherwise their applications will be liable to be rejected/returned.
( S. S. SANDHU )
ZONAL JT. DIRECTOR GENERAL OF FOREIGN TRADE
ANNEXURE-1
(1) CHEMICALS PRODUCTS, DRUGS AND PHARMACEUTICALS
a) Step-wise manufacturing process.
|
Yes/No |
b) Complete Chemical reactions with molecular and structural formula and molecular weights along with stage-wise % yields on molar basis.
|
Yes/No |
c) Material balance (stoichiometric Balance details) for the entire manufacturing process.
|
Yes/No |
d) Requirement and recovery of solvents used in the entire manufacturing process at each step.
|
Yes/No |
e) Authentic technical literature/catalogue in support of percentage yield claimed in the entire manufacturing process.
|
Yes/No |
f) Details of by- product/co-products formed in the above process with their quantities and values.
|
Yes/No |
g) Details of solvents charged, recovered and consumed in each step of the manufacturing process in terms of quantity and detailed reasons for the low recovery or non-recovery of solvents wherever applicable to be invariably mentioned.
|
Yes/No |
h) Collaborator’s guaranteed norms, if any.
|
Yes/No |
i) Percentage purity of finished product and raw materials and percentage of any diluent/moisture etc. in the export product.
|
Yes/No |
j) End use of the chemical intermediates being exported. In case of the dedicated drug intermediates for use only in bulk drugs the name of the bulk drug where the same is to be used should be indicated.
|
Yes/No |
k) Copy of the valid Drug Manufacturing Licence (DML) in case of drug formulations/ dosage forms and also for those bulk drugs approved for export purpose.
|
Yes/No |
l) Standard technical literature pertaining to the process as well as yields in case of new drug molecules being exported. This technical material can be by way of standard references- Chemical Abstracts, Journal of Organic Chemistry and the like or copy of the relevant patent showing relevant reactions and yields.
|
Yes/No |
m) Pharmaceutical references whether the export product is of USP, BP etc. as per copy of export order showing the pharmacoepial specifications which are as per valid DML where State Drug Licensing Authority mentions the product as BP/USP.
|
Yes/No |
(II) ENGINEERING PRODUCTS
a) Model number, technical specification and specific quantity-both in terms of number (if any) and/or weight, of each exports product (Column 4 of Appendix 10).
|
Yes/No |
b) Details technical Note on manufacturing process.
|
Yes/No |
c) Drawing/ catalogues of each export product
|
Yes/No |
d) Weight of each product (if the inputs includes raw material)
|
Yes/No |
IMPORT ITEMS
A. COMPONENTS
(i) Technical characteristics/ part numbers, if any.
|
Yes/No |
(ii) Assembly drawings/diagrams of the resultant product showing placement of components.
|
Yes/No |
(iii) Usage of the components.
|
Yes/No |
(iv) Weight of the components.
|
Yes/No |
(v) Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares.
|
Yes/No |
B. RAW MATERIALS/CONSUMABLES
(i) Grade/composition/range/thickness
|
Yes/No |
(ii) Detailed calculation for the quantity of each raw material, supporting drawings and net weight of each item to be fabricated/manufactured from the said raw materials.
|
Yes/No |
(iii) Stage wise details on the net content in the resultant product with complete justification thereof.
|
Yes/No |
(III) TEXTILE PRODUCTS
(a) Detailed drawings of the items of manufacture i.e. export product;
|
Yes/No |
(b) Justification for wastages claimed in regard to the items to be imported.
|
Yes/No |
(c) Justification for import of particular grade/specification/dimension of raw material applied for etc.
|
Yes/No |
(IV) PLASTIC/RUBBER PRODUCTS
a) Detailed manufacturing process along with technical justification for wastages claimed at each stage of manufacturing process.
|
Yes/No |
b) Technical descriptions/specifications including size, thickness and weight range of plastic/rubber etc. of the products to be exported along with small samples of export products.
|
Yes/No |
c) Chemical name of Processing Aid, Blowing Agent & pigment proposed to be imported.
|
Yes/No |
d) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
|
Yes/No |
e) Percentage of rubber compound in the export product.
|
Yes/No |
f) Percentage composition of rubber compound in terms of different constituents.
|
Yes/No |
g) Percentage composition by weight of constituents in formulated/blended products.
|
Yes/No |
(V) PESTICIDES
a) Manufacturing process for pesticides for both technical grade as well as formulation, as the case may be.
|
Yes/No |
b) Detailed chemical reactions and material balance alongwith molecular weight of the reactions, % yield and wastages at different stages of manufacturing process supported by authentic/ printed technical literature.
|
Yes/No |
c) Details of by-products, if any, formed during the reaction along with its recovery in terms of quantity and value.
|
Yes/No |
d) Percentage purity of finished product and raw materials and percentage of any diluent/moisture etc. in the export product.
|
Yes/No |
e) Registration Certificate issued from Central Insecticides Board for the manufacture of pesticides (technical grade) and also pesticides formulations.
|
Yes/No |
(VI) PAINTS/SURFACE COATINGS/PRINTING INKS
a) Percentage solid resin content in the export product.
|
Yes/No |
b) Percentage pigment content in the export product.
|
Yes/No |
c) Percentage volatile content in the export product.
|
Yes/No |
(VII) DYES & DYE INTERMEDIATES
a) Manufacturing process, material balance and flow chart.
|
Yes/No |
b) Balanced chemical reaction showing all the reactants, product and by-products(s) with their molecular formulas and molecular weights.
|
Yes/No |
c) Stage-wise % yield in respect of each reactant along with justification.
|
Yes/No |
d) Authentic/printed technical literature in support of yield or quantity of items applied for import.
|
Yes/No |
e) Details of solvents charged during the process, quantity recovered and loss in process and recovery.
|
Yes/No |
f) Details of by products formed during the process and their recovery in terms of quantity and value.
|
Yes/No |
g) Details of standardization and % dye content of export item.
|
Yes/No |
h) Colour Index No. and Hue No. of Dyes.
|
Yes/No |
(VIII) PAPER AND PAPER PRODUCTS
(a) GSM of item of export/import.
|
Yes/No |
(b) Coating composition in case of coated paper and percentage coating weight in the export product.
|
Yes/No |
Presented by eximkey.com