Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

RBI Notification Circulars Master Circulars RBI/2004-05/5 Master Circular No. / 5 /2004-05 DT. 01/07/2004

RBI/2004-05/5 Master Circular No. / 5 /2004-05 DT. 01/07/2004

Master Circular- External Commercial Borrowings and Trade Credits
External Commercial Borrowings and Trade Credits availed by residents are being governed by clause (d) of sub-section 3 of section 6 of the Foreign Exchange Management Act, 1999 read with section 6 of Notification No. FEMA 3/ 2000-RB dated May 3, 2000 as amended from time to time.

2. This Master Circular consolidates all existing instructions on the subject of “External Commercial Borrowings and Trade Credits” at one place. The list of underlying circulars/notifications is set out in Annex-I.

3. As recommended by the Committee on Procedures and Performance Audit on Public Services (CPPAPS) (Chairman : Shri S. S. Tarapore) set up by the Reserve Bank, this Master Circular is being issued with a sunset clause of one year. This circular will stand withdrawn on July 1, 2005 and be replaced by an updated Master Circular on the subject.

Yours faithfully,

Grace Koshie
Chief General Manager

Annex - I

List of circulars which have been consolidated in this
Master Circular on External Commercial Borrowings and Trade Credits.

Sl. No.	Circular No.	Date
1.	AP(DIR Series) Circular No.41	April 29, 2002
2.	AP(DIR Series) Circular No.29	October 18, 2003
3.	AP(DIR Series) Circular No.60	January 31, 2004
4.	AP(DIR Series) Circular No.75	February 23, 2004
5.	AP(DIR Series) Circular No.82	April 1, 2004
6.	AP(DIR Series) Circular No.87	April 17, 2004

PART - A EXTERNAL COMMERCIAL BORROWINGS

External Commercial Borrowings (ECB) can be accessed under two routes, viz., (i) Automatic Route and (ii) Approval Route.

Section I : AUTOMATIC ROUTE

ECB for investment in real sector -industrial sector, especially infrastructure sector-in India, will be under Automatic Route, i.e. will not require RBI/Government approval. In case of doubt as regards eligibility to access Automatic Route, applicants may take recourse to the Approval Route.

i) Eligible borrowers

Corporates registered under the Companies Act except financial intermediaries (such as banks, financial institutions (FIs), housing finance companies and NBFCs) are eligible. Individuals, Trusts and Non-Profit making Organisations are not eligible to raise ECB.

ii) Recognised Lenders

Borrowers can raise ECB from internationally recognised sources such as (i) international banks, international capital markets, multilateral financial institutions (such as IFC, ADB, CDC etc.,), (ii) export credit agencies and (iii) suppliers of equipment, foreign collaborators and foreign equity holders.

iii) Amount and Maturity

iv) All-in-cost ceilings

All-in-cost includes rate of interest, other fees and expenses in foreign currency except commitment fee, pre-payment fee, and fees payable in Indian Rupees. Moreover, the payment of withholding tax in Indian Rupees is excluded for calculating the all-in-cost.

The all-in-cost ceilings for ECB will be indicated from time to time.

The following ceilings will be valid till reviewed.

Minimum Average Maturity Period	All-in-cost Ceilings over six month LIBOR*
Three years and up to five years	200 basis points
More than five years	350 basis points

* for the respective currency of borrowing or applicable benchmark.

v) End-use

vi) Guarantees

Issuance of guarantee, standby letter of credit, letter of undertaking or letter of comfort by banks, financial institutions and NBFCs relating to ECB is not permitted.

vii) Security

The choice of security to be provided to the lender/supplier is left to the borrower. However, creation of charge over immovable assets and financial securities, such as shares, in favour of overseas lender is subject to Regulation 8 of Notification No. FEMA 21/RB-2000 dated May 3, 2000 and Regulation 3 of Notification No. FEMA 20/RB-2000, dated May 3, 2000, respectively.

viii) Parking of ECB proceeds overseas

ECB proceeds should be parked overseas until actual requirement in India.

ix) Prepayment

Prepayment of ECB up to USD 100 million is permitted without prior approval of RBI, subject to compliance with the stipulated minimum average maturity period as applicable for the loan.

x) Refinance of existing ECB

Refinancing of existing ECB by raising fresh loans at lower cost is permitted subject to the condition that the outstanding maturity of the original loan is maintained.

xi) Debt Servicing

The designated Authorised Dealer (AD) has the general permission to make remittances of instalments of principal, interest and other charges in conformity with ECB guidelines issued by Government / RBI from time to time.

xii) Procedure

Borrower may enter into loan agreement with recognised overseas lender for raising ECB under Automatic Route without prior approval of RBI. The borrower may note to comply with the reporting arrangement under paragraph 2(C)(i). The primary responsibility to ensure that ECB raised / utilised are in conformity with the ECB guidelines and the Reserve Bank regulations/directions/circulars is that of the concerned borrower.

Section II : APPROVAL ROUTE

The following types of proposals for ECB will be covered under the Approval Route.

i) Eligible borrowers

a) Financial institutions dealing exclusively with infrastructure or export finance such as IDFC, IL&FS, Power Finance Corporation, Power Trading Corporation, IRCON and EXIM Bank will be considered on a case by case basis.

b) Banks and financial institutions which had participated in the textile or steel sector restructuring package as approved by the Government will also be permitted to the extent of their investment in the package and assessment by RBI based on prudential norms. Any ECB availed for this purpose so far will be deducted from their entitlement.

c) Cases falling outside the purview of the automatic route limits and maturity period indicated at Section I paragraphs (iii) (a) and (b).

ii) Recognised Lenders

Borrowers can raise ECB from internationally recognised sources such as (i) international banks, international capital markets, multilateral financial institutions (such as IFC, ADB, CDC etc.,), (ii) export credit agencies and (iii) suppliers of equipment, foreign collaborators and foreign equity holders.

iii) All-in-cost ceilings

All-in-cost includes rate of interest, other fees and expenses in foreign currency except commitment fee, pre-payment fee, and fees payable in Indian Rupees. Moreover, the payment of withholding tax in Indian Rupees is excluded for calculating the all-in-cost.

The all-in-cost ceilings for ECB will be indicated from time to time. The following ceilings will have immediate effect and will be valid till reviewed.

Minimum Average Maturity Period	All-in-cost Ceilings over six month LIBOR*
Three years and up to five years	200 basis points
More than five years	350 basis points

* for the respective currency of borrowing or applicable benchmark.

iv) End-use

v) Guarantees

Issuance of guarantee, standby letter of credit, letter of undertaking or letter of comfort by banks, financial institutions and NBFCs relating to ECB is not normally permitted. Applications for providing guarantee/standby letter of credit or letter of comfort by banks, financial institutions relating to ECB in the case of SME will be considered on merit subject to prudential norms.

vi) Security

The choice of security to be provided to the lender/supplier is left to the borrower. However, creation of charge over immovable assets and financial securities, such as shares, in favour of overseas lender is subject to Regulation 8 of Notification No. FEMA 21/RB-2000 dated May 3, 2000 and Regulation 3 of Notification No. FEMA 20/RB-2000, dated May 3, 2000, respectively.

vii) Parking of ECB proceeds overseas

ECB proceeds should be parked overseas until actual requirement in India.

viii) Prepayment

Prepayment of ECB up to USD 100 million is permitted without prior approval of RBI, subject to compliance with the stipulated minimum average maturity period as applicable for the loan.

ix) Refinance of existing ECB

Refinancing of outstanding ECB by raising fresh loans at lower cost is permitted subject to the condition that the outstanding maturity of the original loan is maintained.

x) Debt Servicing

The designated AD has the general permission to make remittances of instalments of principal, interest and other charges in conformity with ECB guidelines issued by Government / RBI from time to time.

xi) Procedure

Applicants are required to submit an application in form ECB (format in Annex II) through designated AD to the Chief General Manager-in-Charge, Foreign Exchange Department, Reserve Bank of India, Central Office, External Commercial Borrowings Division, Mumbai-400 001 along with necessary documents.

xii) Empowered Committee

RBI has set up an Empowered Committee to consider proposals coming under the approval route.

Section III : REPORTING ARRANGEMENTS AND DISSEMINATION OF INFORMATION

i) Reporting Arrangements

ii) Dissemination of Information

For providing greater transparency, information with regard to the name of the borrower, amount, purpose and maturity of ECB under both Automatic Route and Approval Route are put on the RBI website on a monthly basis with a lag of one month to which it relates.

Section IV : Foreign Currency Convertible Bonds (FCCB)

The liberalisation made for ECB has been also extended to FCCB in all respects.

Section V : Compliance with ECB Guidelines

The primary responsibility to ensure that ECB raised/ utilised are in conformity with the Reserve Bank instructions is that of the concerned borrower and any contravention of the ECB guidelines will be viewed seriously and may invite penal action. The designated AD is also required to ensure that raising/utilisation of ECB is in compliance with ECB guidelines at the time of certification.

Section VI : ECB under erstwhile USD 5 Million Scheme

Designated ADs are permitted to approve elongation of repayment period for loans raised under the erstwhile USD 5 Million Scheme, provided there is a consent letter from the overseas lender for such re-schedulement without any additional cost. Such approval with existing and revised repayment schedule along with the Loan Key/Loan Registration Number should be initially communicated to the Chief General Manager, Foreign Exchange Department, Reserve Bank of India, Central Office, ECB Division, Mumbai within seven days of approval and subsequently in ECB - 2.

SECTION VII Crystallisation of ECB Liability

ADs desiring to crystalise their foreign exchange liability arising out of guarantees provided for ECB raised by corporates in India in to Rupees, may make an application to the Chief General Manager, Foreign Exchange Department, External Commercial Borrowings Division, Reserve Bank of India, Central Office, Mumbai, giving full details viz., name of the borrower, amount raised, maturity, circumstances leading to invocation of guarantee/letter of comfort, date of default, its impact on the liabilities of the overseas branch of the Authorised Dealer concerned and other relevant factors.

SECTION VIII ECB by Units in Special Economic Zones (SEZ)

Units in SEZ are permitted to raise ECB subject to the following conditions:

a) ECB is raised for their own requirement, and

b) They shall not transfer or on-lend any borrowed funds to their sister concern or any other unit in Domestic Tariff Area (DTA).

PART-B TRADE CREDITS FOR IMPORTS INTO INDIA

‘Trade Credits’ (TC) refer to credits extended for imports directly by the overseas supplier, bank and financial institution for original maturity of less than three years. Depending on the source of finance, such trade credits include suppliers’ credit or buyers’ credit. Suppliers’ credit relates to credit for imports in to India extended by the overseas supplier, while buyers’ credit refers to loans for payment of imports in to India arranged by the importer from a bank or financial institution outside India for maturity of less than three years. It may be noted that buyers’ credit and suppliers’ credit for three years and above come under the category of External Commercial Borrowings (ECB) which are governed by ECB guidelines.

Amount and Maturity

ADs are permitted to approve trade credits for imports into India up to USD 20 million per import transaction for import of all items (permissible under the EXIM Policy) with a maturity period (from the date of shipment) up to one year. For import of capital goods, ADs may approve trade credits up to USD 20 million per import transaction with a maturity period of more than one year and less than three years. No roll-over/extension will be permitted by the AD beyond the permissible period.

As hitherto, ADs shall not approve trade credit exceeding USD 20 million per import transaction.

All-in-cost Ceilings

The all-in-cost ceilings are as under:

Maturity period	All-in-cost ceilings over 6 months LIBOR*
Up to one year	50 basis points
More than one year but less than three years	125 basis points

* for the respective currency of credit or applicable benchmark.

The all-in-cost ceilings include arranger fee, upfront fee, management fee, handling / processing charges, out of pocket and legal expenses, if any. The all-in-cost ceilings will be reviewed from time to time.

Guarantee

As hitherto, ADs shall not issue guarantee, letter of undertaking or letter of comfort in favour of overseas lender on behalf of their importer constituent for trade credit without prior approval of the Reserve Bank.

Reporting Arrangements

As regards reporting arrangements, ADs are required to furnish details of approvals, drawal, utilisation, and repayment of trade credit granted by all its branches, in a consolidated statement, during the month, in form TC (format in Annex V) from April 2004 onwards to the Director, Division of International Finance, Department of Economic Analysis and Policy, Reserve Bank of India, Central Office Building, 8th floor, Fort, Mumbai-400 001 (and in MS-Excel file through email to deapdif@rbi.org.in ) so as to reach not later than 10th of the following month. Each trade credit may be given a unique identification number by the AD.

Annex II

Form ECB
Application for raising
External Commercial Borrowings (ECB)
under Approval Route
Instructions

The complete application should be submitted by the applicant through the designated authorised dealer to the Chief General Manager-In-Charge, Foreign Exchange Department, Central Office, ECB Division, Reserve Bank of India, Mumbai 400 001.

Documentation:

Following documents, (as relevant) certified by authorised dealer, should be forwarded with the application:

(i) A copy of offer letter from the overseas lender/supplier furnishing complete details of the terms and conditions of proposed ECB.

(ii) A copy of the import contract, proforma/commercial invoice/bill of lading.

___________________________________________________________________________

PART-A- GENERAL INFORMATION ABOUT THE BORROWER1. Name of the applicant
(BLOCK LETTERS)
Address
___________________________________________________________________________
2. Status of the applicant
i) Private Sector
ii) Public Sector
___________________________________________________________________________
PART-B-INFORMATION ABOUT THE PROPOSED ECB___________________________________________________________________________

	Currency	Amount	US$ equivalent
1. Details of the ECB (a) Purpose of the ECB (b) Nature of ECB [Please put (x) in the appropriate box] (i) Suppliers’ Credit (ii) Buyers’ Credit (iii) Syndicated Loan (iv) Export Credit (v) Loan from foreign collaborator/equity holder (with details of amount, percentage equity holding in the paid-up equity capital of the borrower company) (vi) Floating Rate Notes (vii) Fixed Rate Bonds (viii) Line of Credit (ix) Commercial Bank Loan (x) Others (please specify) (c) Terms and conditions of the ECB (i) Rate of interest : (ii) Up-front fee : (iii) Management fee : (iv) Other charges, if any (Please specify) : (v) All-in-cost : (vi) Commitment fee : (vii) Rate of penal interest : (viii) Period of ECB : (ix) Details of call/put option, if any. : (x) Grace / moratorium period : (xi) Repayment terms (half yearly/annually/bullet) : (xii) Average maturity :

Currency

Amount

US$ equivalent

1. Details of the ECB

(a) Purpose of the ECB

(b) Nature of ECB [Please put (x) in the appropriate box]

___________________________________________________________________________
2. Details of the lender

Name and address of the lender/supplier
___________________________________________________________________________
3. Nature of security to be provided, if any.
___________________________________________________________________________

PART C-INFORMATION ABOUT DRAW DOWN AND REPAYMENTS

Proposed Schedule
Draw-down			Repayment of Principal			Interest Payment
Month	Year	Amount	Month	Year	Amount	Month	Year	Amount

PART D-ADDITIONAL INFORMATION
1. Information about the project
i) Name & location of the project :
ii) Total cost of the project : Rs. USD
iii) Total ECB as a % of project cost:
iv) Nature of the project :
v) Whether Appraised by financial institution/bank :
vi) Infrastructure Sector :

vii) Whether requires clearance from any :
statutory authority ? If yes, furnish
the name of authority, clearance no.
and date.

Year	Registration No.	Currency	Loan Amount	Amount disbursed	Amount outstanding*
2. ECB already availed -(not applicable for the first time borrower)
2003-04
2002-03
2001-02

* net of repayments, if any, on the date of application.

PART E-CERTIFICATIONS
1. By the applicant

We hereby certify that -(i) the particulars given above are true and correct to the best of our knowledge and belief.

(ii) the ECB to be raised will be utilised for permitted purposes

________________________________________
(Signature of Authorised Official of the applicant)

Place_______________		Name:_________________________________
Date________________	Stamp	Designation_____________________________ Phone No. ______________________________ Fax ________________________________ E-mail _________________________________

___________________________________________________________________________
2. By the authorised dealer –

We hereby certify that –(i) the applicant is our customer.

(ii) we have scrutinised the application and the original letter of offer from the lender/supplier and documents relating to proposed borrowing and found the same to be in order.

________________________________
(Signature of Authorised Official)

Place ________________		Name _________________________________
Date_________________	Stamp	Name of the Bank/branch__________________ A.D.Code______________________________

___________________________________________________________________________

Annex III

Form 83

Reporting of loan agreement details under Foreign Exchange Management Act, 1999
(for all categories and any amount of ECB)
Instructions:

1. The borrower is required to submit completed Form 83, in duplicate, certified by the Company Secretary (CS) or Chartered Accountant (CA) to the designated Authorised Dealer (AD). One copy is to be forwarded by the designated AD to the Director, Balance of Payments Statistics Division, Department of Statistical Analysis and Computer Services (DESACS), Reserve Bank of India, Bandra-Kurla Complex, Mumbai-400 051 within 7 days from the date of signing loan agreement between borrower and lender for allotment of loan registration number.

2. Do not leave any column blank. Furnish complete particulars against each item. Where any particular item is not applicable write “N.A.” against it.

3. All dates should be in format YYYY/MM/DD, such as 2004/01/21 for January 21, 2004.

4. Before forwarding Form 83 to the Reserve Bank, the Authorised Dealer must scrutinise all the related original documents and ensure that the form is complete in all respects and in order.

5. If space is not sufficient for giving full information/particulars against any item, a separate sheet may be attached to the form and serially numbered as Annex.

6. Firms/companies obtaining sub-loans through DFIs/FIs/banks/NBFCs etc. should not complete this form but approach the concerned financial institution directly for reporting.

FOR RBI (DESACS) Use only		Loan_key:cccccccccc
CS-DRMS Team	Received on	Action Taken on	Loan Classification

Agreement Details (To be filled by borrowers of External Commercial Borrowings)

Part A: Basic Details
ECB Title / Project
Registration Number	cccccccccc
No. and Date of RBI approval (if applicable)
Loan Key Number (allotted by RBI/ Govt.)	cccccccccc

Agreement Date (YYYY/MM/DD)

Currency Name

Currency Code (SWIFT)

Amount (in FC)

(For RBI Use)

Guarantee Status

Guarantor (Name, Address, contact number etc. )

(Use code as per Box 1) ?

Multi Currency Type

Name and address of the Borrower (Block Letters)

Contact Person's Name:
Designation:
Phone No. :
Fax no. :
E-mail ID :

Name and address of lender / foreign supplier / lesser (Block Letters)

Country:
E-mail ID :

(For RBI DESACS use)

Borrower’s Category (Tick in appropriate box)				Lender's Category
Public Sector Unit			Private Sector Unit
Detailed category (tick below)					Multi-lateral Institution
	Bank				Foreign Government (Bilateral Agency)
	NBFC	Reg. No.			Export Credit / Insurance Institution
	Financial Institution (Other than NBFC)				Indian Commercial Bank branch working abroad
	Corporate				Other Commercial Bank
	Other (Specify)				Supplier of Goods
					Leasing Company / Finance Company
					Foreign Collaborator / Foreign Equity Holder (with details of amount and percentage holding in the paid-up equity capital of the borrower company)
					International Capital Market
					Other (Specify)

Please tick if a foreign holding company								Please tick in case the lender holds 10 per cent or more equity capital in borrower company
Specify Authorised Dealer’s Name, and bank code								Lender's Reference / IBRD No. (if it is a IBRD loan)
Bank Code Part I:
Part II:
Fax : E-mail ID:

Part B: Other Details
ECB approval Scheme (Tick in appropriate Box)	Maturity Details
Automatic Route	Effective Date of the Loan
Approval Route	Last Date of Disbursement
Approved by Govt.	Maturity Date (Last payment date)
	Grace Period (Year/Month)	Y	Y	M	M

	Economic Sector /Industry Code (See Box 3)
Purpose of Borrowings Code (See box2)

If Import, specify the Country of Import (if more than one country, attach details):
Type of ECB
c Buyers’ Credit		c Suppliers’ Credit
c Line of Credit		cExport Credit from Bilateral Sources
c Commercial loan / Syndicated Loan (attach sheet for percentage distribution among lenders)		c Securitised instruments - Bonds, CP, FRN etc.
c Financial Lease		cOthers (Specify)
c Refinancing of old ECBs: Reg No. of the old ECB		cccccccccc
Approval No.	Date:	Amount refinanced:	Reason:
Hedging risks using	Interest rate swap	Currency swap Others (specify)

Part C: Schedule of transactions
Interest Payment Schedule:

First Payment Date

Number of Payments in a Year

Fixed Rate

Floating Rate:
Base

Margin

Cap Rate:

Floor Rate:

Schedule of Draw Down
Tranche No	Date (YYYY/MM/DD) (Please see note below)	Currency	Amount	If more than one equal installments
Tranche No	Date (YYYY/MM/DD) (Please see note below)	Currency	Amount	Total Number of drawals	No.of drawals in a calendar year



Note:	1. In the case of import of goods or services, date of import may be furnished against date of draw down. 2.In the case of financial lease date of acquisition (import) of the goods is to be mentioned as date of draw down. 3. In the case of securitised instruments, date of issue may be shown as date of draw down 4. In case more than equal draw down transactions are shown in a row above, date of first transaction to be mentioned.

Principal Repayment Schedule
Date (YYYY/MM/DD) (First repayment date)	Currency	Amount in FC in each transaction	If more than one equal installments		Annuity Rate (if annuity payment)
Date (YYYY/MM/DD) (First repayment date)	Currency	Amount in FC in each transaction	Number of installments	No. of payments in a calendar year	Annuity Rate (if annuity payment)

Please tick in appropriate Boxes if those options are there in the loan agreement :

Call Option:

Percent of Debt
c

Put Option

Percent of Debt
c

Can be executed after date
(s)

Note: In the case of annuity payments, please indicate each equal installment of principal and interest amount with rate. In the case of principal repayment using a percentage profile, percentages may also be indicated.
Penal Interest for late payment	Fixed	% per annum or Base :	Margin:
Commitment Charges		% per annum of :	% of Undrawn Amount
Other Charges

Nature of Charge (Specify)	Expected Date of Payment	Currency	Amount	In case of many equal payments
Nature of Charge (Specify)	Expected Date of Payment	Currency	Amount	No. of payments in a year	Total number of payments

PART D : ECB already availed -(not applicable for the first time borrower)
Year	Registration No.	Currency	Loan Amount	Amount disbursed	Amount outstanding*
2003-04
2002-03
2001-02

* net of repayments, if any, on the date of application.

We hereby certify that the particulars given above are true and correct to the best of our knowledge and belief. No material information has been withheld and / or misrepresented.

Place : ___________ Date : ___________	Stamp	______________________________________ (Signature of the Authorised Official of the Company) Name : ________________ Designation :____________
Place : ___________ Date : ___________	Stamp	_____________________________________ (Signature of Company Secretary / Chartered Accountant) Name :_______________________________ [For use of Authorised Dealer]

We certify that the borrower is our customer and the particulars given in this form are true and correct to the best of our knowledge and belief. Furthermore, the ECB is in compliance with ECB guidelines.

Place : ___________
Date : ___________

Stamp

___________________________________
(Signature of Authorised Official)
Name : ______________________________
Designation :
Name of the bank/branch _______________
Bank Code :

BOX 1: Guarantee Status Code			BOX 2: Purpose of Borrowings Code
Sr.No.	Code	Description	Sr.No.	Code	Description
1	GG	Govt. of India guarantee.	1	IC	Import of capital goods
1	CG	Public Sector guarantee	2	RL	Local sourcing of capital goods (Rupee expenditure)
2	PB	Public Sector Bank Guarantee.	3	SL	On-lending or sub- lending
3	FI	Financial Institution Guarantee.	4 5	RP NP	Repayment of earlier ECB New project
4	MB	Multilateral /Bilateral Institution Guarantee.	6	ME	Modernisation/Expansion of existing units
5	PG	Private Bank Guarantee	7	PW	Power
6	PS	Private Sector Guarantee	8	TL	Telecommunication
7	MS	Mortgage of Assets / Security	9	RW	Railways
8	OG	Other Guarantee	10	RD	Roads
9	NN	Not Guaranteed	11	PT	Ports
			12	IS	Industrial parks
			13	UI	Urban infrastructure
			14	OI	Overseas investment in JV/WOS
			15	IT	Development of Integrated Townships
			16	DI	PSU Disinvestment
			17	TS	Textile/Steel Restructuring Package
			18	OT	Others (Pl. specify)

BOX 3 : Industry codes to be used
Industry Group Name	Industry Description	Code
PLANTATIONS	TEA	111
	COFFEE	112
	RUBBER	113
	OTHERS	119
MINING	COAL	211
	METAL	212
	OTHERS	219
PETROLEUM & PERTOLEUM PRODUCTS MANUFACTURING		300
AGRICULTURAL PRODUCTS (400)	FOOD	411
	BEVERAGES	412
	SUGAR	413
	CIGARETTES & TOBACCO	414
	BREWERIES & DISTILLERIES	415
	OTHERS	419
TEXTILE PRODUCTS (420)	COTTON TEXTILE	421
	JUTE & COIR GOODS	422
	SILK & RAYON	423
	OTHER TEXTILE	429
TRANSPORT EQUIPMENT (430)	AUTOMOBILES	431
	AUTO ACCESSORIES & PARTS	432
	SHIP BUILDING EQUIPMENTS & STORES	433
	RAILWAY EQUIPMENT & STORES	434
	OTHERS	439
MACHINERY & TOOLS (440)	TEXTILE MACHINERY	441
	AGRICULTURAL MACHINERY	442
	MACHINE TOOLS	443
	OTHERS	449
METAL & METAL PRODUCTS (450)	FERROUS (IRON & STEEL)	451
	NON-FERROUS	452
	SPECIAL ALLOYS	453
	OTHERS	459
ELECTRICAL, ELECTRONIC GOODS & MACHINERY (460)	ELECTRICAL GOODS	461
	CABLES	462
	COMPUTER HARDWARE & COMPUTER BASED SYSTEMS	463
	ELECTRONIC VALVES, TUBES & OTHERS	464
	OTHERS	469
CHEMICALS & ALLIED PRODUCTS (470)	FERTILIZERS	471
	DYES & DYES STUFF	472
	MEDICINES & PHARMACEUTICALS	473
	PAINTS & WARNISHING	474
	SOAPS, DETERGENTS, SHAMPOOS, SHAVING PRODUCT	475
	OTHERS	479
OTHERS of Manufacturing (480)	CEMENT	481
	OTHER BUILDING MATERIALS	482
	LEATHER & LEATHER PRODUCTS	483
	WOOD PRODUCTS	484
	RUBBER GOODS	485
	PAPER & PAPER PRODUCTS	486
	TYPEWRITERS & OTHER OFFICE EQUIPMENT	487
	PRINTING & PUBLISHING	488
	MISCELLANEOUS	489
TRADING		500
CONSTRUCTION & TURN KEY PROJECTS		600
TRANSPORT		700
UTILITIES (800)	POWER GENERATION, TRANSMISSION & DISTRIBUTION	811
UTILITIES (800)	OTHERS	812
BANKING SECTOR		888
SERVICES		900
TELECOMMUNICATION SERVICES		911
SOFTWARE DEVELOPMENT SERVICES		912
	TECHNICAL ENGINEERING & CONSULTANCY SERVICES	913
	TOURS & TRAVEL SERVICES	914
	COLD STORAGE, CANNING & WAREHOUSING SERVICES	915
	MEDIA ADVERTISING & ENTERTAINMENT SERVICES	916
FINANCIAL SERVICES		917
TRANSPORT SERVICES		919
OTHERS (NOT CLASSIFIED ELSEWHERE)		999

Annex IV

ECB - 2

Reporting of actual transactions of External Commercial Borrowings (ECB)
under Foreign Exchange Management Act, 1999
(for all categories and any amount of loan)

Return for the Month of .

1. This return should be filled in for all categories of ECB. It should be submitted within 7 working days from the close of the month through the designated Authorised Dealer to the Director, Department of Statistical Analysis and Computer Services (DESACS), Balance of Payments Statistics Division, Reserve Bank of India, C-8/9, Bandra-Kurla Complex, Bandra (East), Mumbai-400 051. If there is no transaction during a particular period, a Nil return should be submitted.

2. Please do not leave any column blank. Furnish complete particulars against each item. Where any particular item is not applicable write “N.A.” against it.

3. All dates should be in format YYYY/MM/DD, such as 2004/01/21 for January 21, 2004.

4. Borrowers obtaining sub-loans through DFIs/Banks/NBFCs etc. should not complete this form as the concerned financial institution would directly submit ECB-2.

5. Before forwarding the return to Reserve Bank (DESACS), the Company Secretary / Chartered Accountant must scrutinise related original documents and ensure that the return is complete and in order as per ECB guidelines issued by Government/RBI.

6. The unique Loan Identification Number (LIN)/RBI Registration Number (in case of loan approved prior to February 01, 2004) must be specified as allotted by RBI. Similarly, the Loan Registration Number (since February 01, 2004) has to be specified.

7. If space is not sufficient for giving full information against any item, a separate sheet may be attached to the return and serially numbered as Annex.

8. For purpose of utilization of drawdowns, following codes may be used.

BOX 1: Purpose of Utilisation Code
No.	Code	Description	No.	Code	Description
1	IC	Import of capital goods	12	TL	Telecommunication
2	IN	Import of non-capital goods	13	RW	Railways
3	RL	Local sourcing of capital goods (Rupee expenditure)	14	RD	Roads
4	RC	Working capital (Rupee expenditure)	15	PT	Ports
5	SL	On-lending or sub-lending	16	IS	Industrial parks
6	RP	Repayment of earlier ECB	17	UI	Urban infrastructure
7	IP	Interest payments	18	OI	Overseas investment in JV/WOS
8	HA	Amount held abroad	19	IT	Development of Integrated Townships
9	NP	New project	20	DI	PSU Disinvestment
10	ME	Modernisation /expansion of existing units	21	TS	Textile/steel Restructuring Package
11	PW	Power	22	OT	Others (Pl. specify)

9. For source of funds for remittances, following codes are to be used.

BOX 2: Source of Funds for remittance
No.	Code	Description
1	A	Remittance from India
2	B	Account held abroad
3	C	Exports proceeds held abroad
4	D	Conversion of equity capital
5	E	Others (Specify)

FOR RBI (DESACS) Use only

Loan_key

CS-DRMS Team

Received on

Action Taken on

Loan Classification

Part A: Loan Identification Particulars

Loan Registration Number (LRN)

Loan Amount			Borrower Particulars
	Currency	Amount	Name and address of the Borrower (Block Letters) Contact Person's Name: Designation: Phone No. : Fax no. : E-mail ID :
As per Agreement


Revised

Part B: Actual Transaction Details

1. Draw-down during the month :

Tranche No.	Date (YYYY/MM/DD) (Please see note below)	Currency	Amount	Amount of loan committed but not yet drawn at the end of the month (in loan currency)
				Currency	Amount




Note: 1. In the case of import of goods or services, date of import may be furnished against date of draw-down. 2.In the case of financial lease date of acquisition of the goods is to be mentioned as date of draw-down. 3. In the case of securitised instruments, date of issue may be shown as date of draw-down

2. Schedule of balance amount of loan to be drawn in future:

Tranche No	Expected Date (YYYY/MM/DD) of drawdown	Currency	Amount	If more than one equal installment
Tranche No	Expected Date (YYYY/MM/DD) of drawdown	Currency	Amount	Total number of drawals	No. of drawals in a calendar year

3. Details of utilisation of draw-downs during the month:

Tranche No.	Date (YYYY/MM/DD)	Purpose codes (See BOX 1 )	Country	Currency	Amount	Fresh Disbursement/ From A/c held abroad

4. Amount parked abroad outstanding as on beginning of the month _____:

Date (YYYY/MM/DD)	Name of bank and branch	Account No.	Currency	Amount

5. Utilisation of amount parked abroad.

Date (YYYY/MM/DD)	Name of bank and branch	Account No.	Currency	Amount	Purpose

6. Debt Servicing during the month -

Tranche No.	Purpose	Date of Remittance	Currency	Amount	Source of remittance (See Box 2)	Prepayment of Principal (Y/N) *
	Principal
	Interest @ rate
	Others (Specify)

* In case of prepayment please provide details: Automatic Route / Approval No. Date: Amount:

7. Derivative transactions (Interest rate, Currency swap) during the month (if any) -

Type of Swap	Swap Dealer		Counter party		Implementation Date
Type of Swap	Name	Country	Name	Country	Implementation Date
Interest Rate swap
Currency swap
Others (specify)

Tranche No.	New Currency	Interest Rate on the New Currency	New Interest Rate on the Loan Currency	Maturity Date of the swap deal

8. Revised Principal Repayment Schedule (if revised / entered into Interest rate swap)

Date (YYYY/MM/DD) (First repayment date)	Currency	Amount in Foreign Currency in each transactions	If more than one equal installments		Annuity Rate (if annuity payment)
Date (YYYY/MM/DD) (First repayment date)	Currency	Amount in Foreign Currency in each transactions	Total Number of installments	No. of payments in a calendar year (1, 2, 3, 4, 6, 12)	Annuity Rate (if annuity payment)

9. Amount of outstanding loan at the end of the month :

Currency_________________ ccc Amount:____________________

(For RBI Use)

We hereby certify that the particulars given above are true and correct to the best of our knowledge and belief. No material information has been withheld and / or misrepresented.

Place : ___________
Date : ___________

Stamp

___________________________________
(Signature of Authorised Official)
Name : ______________________________
Designation : _________________________

(For Borrower’s use)

Certificate from Company Secretary / Chartered Accountant

We hereby certify that the ECB availed in terms of approval granted by Government or RBI or under approval route / automatic route is duly accounted in the books of accounts. Further, ECB proceeds have been utilised by the borrower for the purpose of ______________________________________________. We have verified all the related documents and records connected with the utilisation of ECB proceeds and found these to be in order and in accordance with the terms and conditions of the loan agreement and with the approval granted by GoI(MoF) or RBI or under approval route / automatic route and is in conformity with the ECB Guidelines issued by the Government.

Place :
Date :

Authorised Signatory
Name & Address
Registration No.

[Stamp]

Certificate by an Authorised Dealer

We hereby certify that the information furnished above with regard to debt servicing, outstandings and repayment schedule is true and correct as per our record. The drawal, utilisation and repayment of the ECB have been scrutinised and it is certified that such drawal, utilisation and repayments of ECB are in compliance with ECB guidelines.

Place : ______________
Date : ______________

[Stamp]

__________________________________
Signature of Authorised Dealer
Name:________________________________________
Designation :__________________________________
Name & Address of
Authorised Dealer
Uniform Code No.__________________________

Form-TC

Annex to A.P. (DIR Series) Circular No. 87 dated April 17, 2004

Part I : Approvals of Trade Credit granted by all branches during the (Month / Year)…………
Name of the AD :	Contact Person:
Address :	Tel : Fax :

Sr. No	Date of Appro-val	Loan Identifi-cation No.	Cate-gory of Borr-ower	Name of Lender*	Country of Lender*	Curre-ncy	Amo-unt	Equiv. Amt. in USD	Rate of Inte-rest	Other chages in USD
1	2	3	4	5	6	7	8	9	10	11









Total

Form-TC

Annex to A.P. (DIR Series) Circular No. 87 dated April 17, 2004

Part I : Approvals of Trade Credit granted by all branches during the (Month /Year)…………

e-mail:

	Period of credit		Type of Crdit**		Item of Import / proposed Import
All-in cost	No. of Days/Mon./Yr	Unit of time period	SC / BC	STC / LTC	Description	Category***
12	13	14	15	16	17	18

I. Supplier's Credit (SC)

II. Buyer's Credit (BC)

III. Short-term Trade Credit (STC) (maturity period up to one year)

IV. Long-term Trade Credit (LTC) (maturity period more than one year & less than three years)

V. Total Trade Credit (TC) (I+II)

*: or Supplier

**: Please type respective code such as SC or BC; STC or LTC.

***: Petroleum Oil Lubricants (POL), Capital Goods (CG), Others (OT)

Note 1: The format of the loan identification number is : TC/(Name of the Bank/branch)/(Identification No.)

Note 2: Information in column nos. 8 to 13 should be numeric only. No alphabets should be entered in those columns.

Note 3:Date format in col. No 2 is YYYY/MM/DD. For example, December 31, 2003 should be entered as 2003/12/31

Note 4:Data on rate of interest (col. No 10) & all-in-cost(col no 12) should be entered as follows: 3 per cent per annum is to be typed as '3.00' without any % sign.

Note 5:In the Col. No 13, no.of days/month/year under period of credit may be entered as follows: '90' for 90 days.

Note 6:In the case of unit of time period(Col. No 14), only unit of time period such as days(DD), months(MM), year(YY) to be entered.

Note 7: Codes for Category of Borrower (in Col. 4) may be entered as follows: PUB: Public Sector, BKG: Banking, PVT:Private

Annex to A.P. (DIR Series) Circular No. 87 dated April 17, 2004

Form-TC

Part II : Disbursement, Utilisation and Debt Servicing of Trade Credit during (month) / (year)
					Repayments (USD)					Date of
Sr. No.	Loan Identifi-cation No.	Amo-unt Appr-oved (USD)	Disburse-ment (USD)	Utilisa-tion (USD)	Princi-pal	Inte-rest	Other char-ges	Total (6+7+8)	Outstan-ding (4-6)	Ship-ment	Final Repay-ment
1	2	3	4	5	6	7	8	9	10	11	12

Note 1: Information in column nos.1, 3 to 10 should be numeric only. No alphabets should be entered in those columns.

Note 2: Date format in col. No 11, 12 is YYYY/MM/DD. For example, December 31, 2003 should be entered as 2003/12/31

Certificate by the Authorised Dealer

1. All trade credits for imports approved by all our branches during the month------------------ have been included in this statement.

2. Related import documents (including EC copy of Bill of Entry) towards utilisation of such trade credits have been verified and found in order.

3. The drawal, utilisation and repayment of all trade credits approved by our branches have been scrutinised and it is cerified that such drawal, utilisation and repayments of trade credits

Place:-----------------------
Date: ------------------------

Signature of Authorised Dealer
[ Stamp]

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password