Cus Notification No.61/1991(N.T.) date 29-8-1991.

SHIPPING BILL AND BILL OF EXPORT (FORM) REGULATIONS, 1991
In exercise of the powers conferred by section 157, read with sections 50 and 60, of the Customs Act, 1962 (52 of 1962), and in supersession of the Shipping Bill and Bill of Export (Form) Regulations, 1976, except as respect things done or omitted to be done before such supersession, the Central Board of Excise and Customs hereby makes the following regulations, namely:—

1. Short title and commencement. — (1) These regulations may be called the Shipping Bill and Bill of Export (Form) Amendment Regulations, 2001.

[OLD(1) These regulations may be called the Shipping Bill and Bill of Export (Form) Regulations, 1991.]

(2) They shall come into force on the 15th June, 2001.

[OLD(2) They shall come into force on the 1st day of October, 1991.]

(In this Notification Short title and commencement has been amended vide Cus Ntf.No.27/2001(NT)dt.31/05/2001)

2. Shipping Bill. — A shipping bill to be presented by an exporter of goods shall be in the form specified in Annexure I, Annexure II, Annexure III or Annexure IV, as the case may be, appended to these regulations.

3. Bill of Export. — A bill of export to be presented by an exporter of goods be in the form specified in Annexure V, Annexure VI, Annexure VII or Annexure VIII, as the case may be, appended to these regulations.

4. Specifications of Shipping Bill and Bill of Export (Form). — The Shipping Bill and Bill of Export forms specified in Annexures I to VIII shall be in accordance with the following specifications, namely :-
(a) the forms shall be printed on foolscap size of paper measuring 34.5 cms by 21.5 cms and shall have the following margins namely :-

(i) top -1.5 cms,

(ii) bottom -1.5 cms,

(iii) left -1.8 cms,

(iv) right - 0.5 cms.

The layout of the forms and the sizes of the boxes shall be as per the layout and boxes shown in the Annexures;

(b) the forms shall be printed on paper of grammage 70 to 85 grams per square metre; the paper should be stable in conditions of 50 to 60 per cent relative humidity;

(c) the captions, insidethe boxes of-the forms should the printed in 6 pt. mono sans-serif and should be located as near as possible to the top left of the boxes;

(d) the forms shall be filled in by using a typewriter only. ANNEXURE -1

DECLARATION TO BE FILED IN CASE OF EXPORT OF GOODS UNDER CLAIM FOR DRAWBACK
I / We _______________________ (name of the exporter) do hereby declare as follows:-

(a) that the quality and-speafications of the goods as stated in this Shipping Bill are in accordancewith the terms of the export contract entered into with the buyer/consignee in pursuance of which the goods are being exported;

(b) that the duties of Customs and Central Excise have been paid in respect of the containers, packing materials and other materials used in the manufacture of the export goods on which drawback is being claimed and that in respect of such containers,packing materials or other materials, no separate claim for rebate of duty under Rule 12A or Rule 191A of the Central Excise Rules, 1944 has been made or will be made to the Central Excise authorities;

(c) that there is no change in the manufacturing formula and in the quantum per unit of the imported materials or components if any, utilised in the manufacture of export goods; and that the materials or components, which have been stated in the application under Rule 6 or Rule 7 to have been imported, continue to be so imported and are not being obtained from indigenous sources;

(d) that the present market value of the goods is as follows :-

(e) that the goods are not manufactured and/or, exported in discharge of export obligation against an advance licence issued under the Duty Exemption Scheme vide relevant import and export policy in force;

(f) that the goods are riot manufactured and/or exported by a unit licenced as a 100% export oriented unit in terms of the import and export policy inforce;

(g) that the goods are not manufactured and/or exported by a unit situated in any Free Trade Zone, Export Processing Zone or any such other Zone;

(h) that the goods are not manufactured partly or wholly in bonds under Section 65 of the Customs Act, 1962;

(i) that the goods are not manufactured partly or wholly in bond under Rule 191B of the Central Excise Rules, 1944;

(j) that the export value .of each of the goods covered by this shipping bill is not less than the total value of all imported materials used in the manufacture of such goods.

[NOTE: Strike out the declaration whichever is not applicable]

Name & Signature of the exporter _________

ANNEXURE - II
DECLARATION TO BE FILED IN THE CASE OF EXPORT OF GOODS UNDER THE D. E. E. C. SCHEME
I / We _______________ (Name of the Exporter) do hereby declare as follows :-

(a) that the goods to be exported under this Shipping Bill are the products corresponding to the export products specified against Sl. No. _____ in part (e) of the DEEC No. _______ dated ____ issued by the
Joint/Deputy Chief Controller of Imports & Exports ______________ (Name of the office).

(b) that the following raw materials/components/consumables have been used for the manufacture of goods covered under this shipment, namely :-

Sl. No.	Description	Quality	Technical characteristics	Quantity	Whether imported/indigenous

(c) that I/We are not availing the benefit of the provisions of Rule 191A or Rule 191B of the Central Excise Rules, 1944

OR
that I/We are availing the benefit of the provisions of Rule 191A or Rule 191B of the Central Excise Rules, 1944 in respect of ___________
(name of the item).
[NOTE : Strike out the declaration whichever is not applicable]

Name & Signature of the Exporter ---------------------------
(for use by the Customs authorities)

Shipping Bill No. & Date. ------------------------------

Name & Signature of the Customs Officer ------------------

ANNEXURE - III
DECLARATION TO BE FILED IN THE CASE OF EXPORT OF GOODS IN ANTICIPATION OF ISSUE OF AN ADVANCE LICENCE/DEEC
I / We _________________ (name of the exporter) do hereby declare as follows :-

(a) that the shipment is in pursuance of discharge of the export obligation against export order No. _______ dated ______; and

(b) I/We request for registration of the shipping bill in anticipation of the grant of an Advance Licence/DEEC for which we have already applied to the Licensing Authority, namely vide our application No. _______ dated _______ and for which I/We have obtained the letter of permit/receipt No. _______ dated _____ from the said Licensing Authority.

(c) that the following raw materials/components/consumables have been used for the manufacture of goods covered under this shipment, namely :-

Sl. No.	Description	Quality	Technical characteristics	Quantity	Whether imported/indigenous

(c) that I/We are not availing the benefit of the provisions of Rule 191A or Rule 191B of the Central Excise Rules, 1944

OR
that I/We are availing the benefit of the provisions of Rule 191A or Rule 191B of the Central Excise Rules, 1944 in respect of____________
(name of the item).
[NOTE : Strike out the declaration whichever is not applicable]

Name & Signature of the Exporter _________
(For use by the Customs authorities)

Shipping Bill No. & Date _________

Name & Signature of the Customs Officer_________

ANNEXURE - IV
DECLARATION TO BE MADE ON SHIPPING BILLS FOR CONSIGNMENTS COVERED BY AR-4A PENDING WEIGHMENT AT THE DOCKS
In consideration of the Commissioner of Customs agreeing to assess the goods on the declared weight pending verification by reference to AR-4A Forms, I/We ___________ (name of the exporter) do hereby agree :-

(a) to pay any extra duty/cess leviable on the goods covered by the Shipping Bill, and

(b) to produce the AR-4A Forms covering the shipment to the Customs House within 15 days of the shipment of the goods.

[NOTE : Strike out the declaration whichever is not applicable]

Name & Signature of the exporter _________
(For use by Customs authorities)
Shipping Bill No. & Date.-
Name & Signature of the Customs Officer_________

ANNEXURE V
DECLARATION TO BE MADE BY EXPORTERS
WHO FILED SHIPPING BILL WITHOUT CERTIFICATE
FROM THE EXPORT INSPECTION FROM THE EXPORT INSPECTION AGENCY ETC.
(a) I/We _________________ (name of the exporter) do hereby declare the goods been despatched are shall be in accordance with the conditions prescribed in the Export (Quality Control and Inspection) Act,1963.Application for neccessary inspection/quality control has been made to _________________ (name of the export inspection agency) and the same in the original will be produced alongwith the goods at the time of customs examination.

(b) I/We __________________ (name of the exporter) do hereby declare the goods are as per the quality control requirements under the Export (Quality Control and Inspection) Act,1963. Application for the issue of inspection/quality control certificate has been made to ____________________ which is duly authorised agencyto issue such acertificate. The said certificate will be produced to the Customs Officer for checking at the time of shipment.

[NOTE : Strike out the declaration whichever is not applicable]

Name & Signature of the exporter_________
(For use by the Customs authorities)

Shipping Bill No. & Date _________

Name & Signature of the Customs Officer_________

Abbreviations

SB No.	Shipping Bill No.
AR-4	Application for removal 4.
QC Cert. No	Quality Control Certificate Number
RBI Code No.	Reserve Bank of India Code Number
L/C No.	Letter of Credit Number
CIF	Cost Insurance Freight
CFR*	Cost and Freight*
FOB	Free on Board
CHA	Custom House Agent
GR Form	Guaranteed Receipt Form
ETC Licence	Export Trade Control Licence
QC Certificate	Quality Control Certificate
DBK	Drawback
AWB No.	Airway Bill No.
EGM No.	Export General Manifesto No.
BE	Bill of Export

* "CFR"is the revised abberivation adopted internationally for "Cost and Freight" instead of "C&F" used earlier.
SHIPPING BILL AND BILL OF EXPORT (FORM)has been amended vide Cus Ntf.No.27/2001(NT) dt.31/05/2001

Presented by eximkey.com