Eximkey - India Export Import Policy 2004 2013 Exim Policy

PUBLIC NOTICE NO. 04 (RE-2001)/1997-2002 DATED 31/03/2001.

SION (Part-1)
 

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
 

CHEMICALS AND ALLIED PRODUCTS


After the existing entry at Sl.No.A-2552, the new entries from Sl.No.A-2553 to A-2668 shall be added as per Annexure ”B” to this Public Notice.
 

ELECTRONICS PRODUCTS

After the existing entry at Sl.No.B-230, the new entry from Sl.No.B-231 shall be added as per Annexure ”C” to this Public Notice.
 

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1600, the new entries from Sl.No.C-1601 to C-1656 shall be added as per Annexure ”D” to this Public Notice.
 

FOOD PRODUCTS

After the existing entry at Sl.No.E-94, the new entries from Sl.No.E-95 to E-102 shall be added as per Annexure ”E” to this Public Notice.
 

LEATHER PRODUCTS

After the existing entry at Sl.No.G-47, the new entry from at Sl.No.G-48 shall be added as per Annexure ”F” to this Public Notice.
 

SPORTS GOODS

After the existing entry at Sl.No.I-29, the new entries from at Sl.No. I-30 to I-34 shall be added as per Annexure ”G” to this Public Notice.
 

TEXTILE PRODUCTS

After the existing entry at Sl.No.J-333, the new entries from Sl.No.J-334 to J-345 shall be added as per Annexure ”H” to this Public Notice.
 

MISCELLANEOUS PRODUCTS

After the existing entry at Sl.No.K-128, the new entries at Sl.No.K-129 to K-134 shall be added as per Annexure ”I” to this Public Notice.

5. This issues in public interest.

Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE

(H. C. AZAD)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the
Public Notice No.04
Dated: 31/03/2001

AMENDMENTS/CORRECTIONS


Sl. No. Page No. Reference Amendments/Corrections
1 2 3 4
1.
47
Chemicals & Allied Products Sl.No.A272
 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty.
Import Item
 Qty. Allowed
A272 Isoniazid BP/USP 1 kg 1. Gamma Picopline
OR
Cyano Pyridine		 1.10 kg/kg

0.98 kg/kg
2.Hydrazine Hydrate (100% basis) 0.45 kg/kg
3.Activated Carbon 0.100 kg/kg


2.
110
Chemicals & Allied Products Sl.No.A807
 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty.
Import Item
 Qty. Allowed
A807 Pigment Red 57:1 1 kg 1. 4-B Acid (p-toluidine o-sulphonic acid or 6 Amino Meta Toluene Sulfonic Acid or 2-Amino 5-methyl benzene Sulfonic Acid) 0.450 kg
2. Bon Acid 0467 kg
3. Sodium Nitrite 0.170 kg
4. Sulphamic Acid 0.005 kg
5. Caustic Soda 0.378 kg
6. Rosin 0.136 kg
7. Calcium Chloride 0.082 kg


3.
111
Chemicals & Allied Products Sl.No.A818
 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
A818 Pigment Yellow 12 1 kg 1. Dichloro Benzidine Dihydro Chloride 0.725 kg
OR  
1. a) Ortho Nitro Chloro Benzene 0.792 Kg
b) Thiourea 0.190 Kg
c) Dichloro 0.170 Kg
2. Acetoacetanilide 0.795 Kg
3. Rosin 0.098 Kg
4.Aluminium Sulphate 0.180 Kg
5.Sulfamic Acid 0.005 Kg
6.Acetic Acid 0.450 Kg
7.Caustic Soda 0.472 Kg
8.Sodium Nitrite 0.311 Kg


4.
164
Chemicals & Allied Products Sl.No.A1280
 The description of import item at Sl. No. 2 (without any change in quantity) shall be amended to read as under:- “Dimethyl Amino Propyl Amine”.


5.
177
Chemicals & Allied Products Sl.No.A1453
 After the import item at Sl. No.2 the following import items (with quantity) shall be added:-
3. Sodium Sulfite 0.740 kg
4. Caustic Soda Lye 0.980 kg
5. Urea 0.764 kg


6.
192
Chemicals & Allied Products Sl.No.A1572
 The description of export item shall be amended to read as under:-“Paper such as Cyclostyled Paper, Typing Paper, Zerox paper, Copier Paper, Ruled/ Un-ruled Paper, Plain Paper, Drawing Sheets etc. in cut sizes”.


7.
218
Chemicals & Allied Products Sl.No.A1704
 1.The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:-
1. Natural rubber/ Relevant
Synthetic rubber namely SBR 1502/1712, Neoprene, PBR, Nitrile”.		 0.680 kg
2.The description of import item at Sl. No. 2 (with quantity) shall be deleted  


8.
242-243
Chemicals & Allied Products Sl.No.A1804
 After the import item at Sl. No.11 the following import items (with quantity) shall be added:-
12.SKO 0.60 KL
13.HSD/LDO 0.60 KL


9.
255-256
Chemicals & Allied Products Sl.No.A1902
 The description of export item shall be corrected to read as under:-
“Profenofos Tech. (Minimum 87%)”.


10.
272
Chemicals & Allied Products Sl.No.A2036
 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty.
Import Item
 Qty. Allowed
A2036 N-Phenyl Piperazine 1 kg 1. Diethyanolamine 1.08 kg
2.Thionyl Chloride 1.54 kg
3. Ethylene Dichloride 1.03 kg
4. Acetone 0.50 kg
5.Toluene 1.00 kg
6.Methanol 0.75 kg


11.
274-275
Chemicals & Allied Products Sl.No.A2059
 The quantity of import item at Sl. No. 3 shall be amended to read as under:-
“1.109 kg”.


12.
291
Chemicals & Allied Products Sl.No.A2175
 The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:-“Potassium Hydroxide (Min.88%)”.


13.
293-194
Chemicals & Allied Products Sl.No.A2198
 The norm covered by this entry shall be deleted.


14.
321
Chemicals & Allied Products Sl.No.A2393
 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
A2393 3-Carbamoyl 4-Methyl 6-Hydroxy N-Ethyl 2-Pyridone

OR

1-Ethyl 6-Hydroxy 4-Methyl 2-pyridone-3-Carbonylamide		 1 kg
1.Ethyl Cyano Acetate 0.820 kg
OR
1. Methyl Cyano Acetate 0.718 kg
 
2. Aceto Acetic Methyl Ester (Methyl Aceto Acetate) 0.876 kg
3. Mono ethyl Amine (70%) 0.730 kg


15. 321 Chemicals & Allied Products
Sl.No.A2394		 The quantity of import item at Sl. No. 2 shall be amended to read as under:-
“2.00 kg”.


16. 15 Chemicals & Allied Products
Sl.No.A2460 (As amended vide Public Notice No. 32 Dt.01.09.2000)		 1.The description of export item shall be amended to read as under:-
“Pigment red 53:1 (C.I. No. 155851:1)”
2.In the description of import item at Sl. No. 2 (without any change in quantity) shall be amended to read as under:-
2. “C. Acid (2-Amino 5-chloro P Toluene Sulphonic Acid”


17. 19 Chemicals & Allied Products
Sl.No.A2500 (As amended vide Public Notice No. 42 Dated: 01/12/2000)		 The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“ 0.24 kg”.


18. 345-346 Electronics Products
Sl.No.B47		 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
B47 Dot Matrix Printers 1 No. 1. Print Head 1 No.
2. Stepper Motor 2 Nos.
3. Ics 14 Nos.
4. Switches(Tactile &Dip) 10 Nos.
5. Connectors 12 Nos.
6. Diodes 38 Nos.
7. Resister Network 13 Nos.
8. Optocouplex (Sensor) 3 Nos.
9. Timing Belt 1 No.
10.High Flex Cable 2 Nos.
11. Engineering Plastics
consists of:
a) ABS(Acrylo Butyle Steridum

Net+5%
b) Polycarbonate Net+5%
c) SAN (Styrene Acrylo Nitrile) Net+5%
d) Poly Acetal Net+5%
12. VDE/UL On/Off Switch 1 No.
13. VDE/UL Power Cord & Socket 1 No
14. Transistor incl.Transistor Arrays 39 Nos.
15. Capacitors 76 Nos.
16. Resistor 134 Nos.
17. Fuse (Electronic) 1 No.
18. Ferrite bead 1 No.
19. Resonator/Oscillator 1 No.
20. Ribbon Cassette 1 No.
21. Capacitor Array 2 Nos.
22. Unpopulated PCBs 2 Nos.
23. Transformers/Static Convertor 1 No.
24. Buzzer 1 No.
25. Mechanical sub assemblies (including tractor Unit, paper Guide Carriage motor aasy, gears shaft frame etc.) 1 set
26. VDE/UL Printer Cable 1 No.
27. Coils 2 Nos.


19. 375 Electronics Products Sl.No.B108 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
B-108 Multiform Bead Glass 1 kg 1. Spray Dried Glass Powder 1.05 kg
OR
1. Glass Frit 1.1 kg
OR
1. Milled Glass Powder 1.05 kg
2. Polyethylene Glycol 0.06 kg
3. Colouring Pigment 0.0125 kg
4. Lanco Wax 0.003 kg
5. Butyl Hydroxy Anisole 0.003 kg
Note:- Import of item at Sl. Nos. 2 to 5 shall not be allowed if “Spray Dried Glass Powder” is opted under item No. 1.


20. 393 Electronics Products Sl.No. B134 The description of import items at Sl. Nos. 7 & 9 (with quantity) shall be amended to read as under:-
“7.(i) ECB 1 No.
OR
7(i) a) PCB (unpopulated) 1 No.
b) Quartz Crytal 1 No.
c) ICs 1 No.
9. Battery Cell 1 No.”


21. 415 Engineering Product Sl.No.C12 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
C12 Aluminium foil commercial grade, embossed/ non embossed, cut to shape, preformed, with/without coating with/ without printing, with/ without reinforcing material 1 kg 1.(a) Aluminium foils stock temper soft or hard in coils or reels 0.850 kg
(b) Polyester, copolymer and polyethylene food grade granules 0.3195 kg
(c) Solvent soluble Dyestuff 0.0023 kg
(d) Synthetic Resin 0.0089 kg
(e) Adhesives 0.0045 kg
OR
1. Aluminium foil reel/coils 1.15 kg
Note: (a) Import Item 1(c) shall be permitted only when export product is printed.
(b) Import Item Nos. 1(b), 1(d) & 1(c) shall be allowed only when the export product is with reinforcing material.


22. 417 Engineering Product
Sl.No.C22		 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
C22 Aluminium Utensils including Anodized 1 kg Aluminium Ingots 1.10 kg/kg content in export product
OR
Aluminium Scrap 1.15 kg/kg content in export product
OR
Aluminium Circles Commercial grade 1.07 kg/kg content in export product
OR
Aluminium Sheets/Coils 1.05 kg/kg content in export product
OR
Aluminium Circles purity 99.7% and above 1.07 kg/kg content in export product
{** This item shall be allowed for import only if the export product is anodized aluminium utensils}


23. 463 Engineering Product Sl.No.C252 The description of export item shall be amended to read as under:-
“Rectangular Conductor Strips/Wires”.
24. 463 Engineering Product Sl.No.C253 1. The description of export item shall be amended to read as under:-
“Plated conductors of Copper or Copper clad Steel or Copper Alloy Wire”.


25. 475 Engineering Product Sl.No.C283 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.23 kgs/KVA”
26. 475 Engineering Product Sl.No.C284 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.64 kgs/KVA”
27. 475-476 Engineering Product Sl.No.C285 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.52 kgs/KVA”
28. 486-487 Engineering Product Sl.No.C324 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


2.77 kgs/KVA”
29. 487 Engineering Product Sl.No.C325 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


3.93 kgs/KVA”
30. 487-488 Engineering Product Sl.No.C326 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


2.54 kgs/KVA”
31. 488 Engineering Product Sl.No.C327 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.95 kgs/KVA”
32. 488 Engineering Product Sl.No.C328 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.46 kgs/KVA”
33. 488-489 Engineering Product Sl.No.C329 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.99 kgs/KVA”
34. 489 Engineering Product Sl.No.C330 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.87 kgs/KVA”
35. 489 Engineering Product Sl.No.C331 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


1.44 kgs/KVA”
36. 490 Engineering Product Sl.No.C332 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.97 kgs/KVA”
37. 490 Engineering Product Sl.No.C333 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


0.63 kgs/KVA”
38. 490 Engineering Product Sl.No.C334 In the description of import item at Sl. No. 3 (with quantity) shall be amended to read as under:-
“OR
3. Transformer Oil Base Stock


3.26 kgs/KVA”
39. 528 Engineering Product Sl.No.C465 After the description of import item at Sl. No. 1 the following alternative import item (with quantity) shall be added:-
“OR
1(b). Baddelyet (containing Zirconium Oxide 95% and above”


935 kg


40. 538 Engineering Product Sl.No.C494 In the description of import item at Sl. No. 2(ii) (without any change in quantity) shall be amended to read as under:-
“2(ii). Alumina/ Graphite/ Carbon Refractories”.
41. 563-564 Engineering Product Sl.No.C527 1.The description of export item shall be amended to read as under:-
“Stainless Steel Wires/ Ribbon”.
2.In the import item at Sl. No. 1(b) (without any change in quantity) shall be amended to read as under:-
“1(b). Stainless Steel Wire of 1.2 mm and above for redrawing of thinner Wire”.
42. 573 Engineering Product Sl.No.C589 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
C589 Epoxy Polyester Powder Coated Cabinet made of CRCA Non-Alloy Steel Sheets.
OR
Cabinets made of CRCA Non-Alloy Steel Sheets other than Epoxy Polyester Powder coated		 1 No. 1.Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1.05 kg/kg content in the export product
2.6 Leverlock with dead locking Mechanism (relevant) 1 No. (net to net)
3.Round Spindle handle relevant 1 No. (net to net)
4.3 Ply Carton (As per packing Policy)
5.ULF Slides 428 mm long @ 2 Nos./drawer Net to Net basis
6.Cam Lock Brass 1 No./Cabinet Net to Net basis
7. Epoxy Polyester Powder 6% of the FOB value
Note: 1.The import of Epoxy Polyester Powder shall be allowed only for cabinets coated with this powder.

Note:2.The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.


43.   Engineering Product Sl.No.C592 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C592 Capseals made out of Tin Plate Waste/ waste or Tin Free Steel 1 No. 1.Tin Plate Waste/ Waste
OR
Tin Free Steel		 1.30 kg/kg content in export product


44. 584 Engineering Product Sl.No.C672 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C672 High Pressure Seamless Gas Cylinder 1 No. 1. Seamless Steel Tubes of relevant Grade 1.06 kg/kg content in the export product
2. Relevant Cylinder Valves 1 No.
3.Relevant Nipples for Cylinder Valve 1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.


45. 587 Engineering Product Sl.No.C689 The description of export item shall be amended to read as under:-
“Forged Body Industrial Valve”.


46. 599 Engineering Product Sl.No.C770 In the description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:-
“1. Aluminium Sheet		 1.05 kg/kg content in export product”


47. 607 Engineering Product Sl.No.C832 The quantity of import items at Sl. Nos. 1 & 2 (without any change in description) the words “content in export product” shall be added.


48. 614-615 Engineering Product Sl.No.C875 1.Import item at Sl. No. 8 i.e. “Lubra Strips” with quantity shall be deleted.
2.After the import item at Sl. No. 7 the following items (with quantity) shall be added:-
“8. Polyox 44 kgs
9. Polyox Coagulant 44 kgs
10. General purpose Polystriene 38 kgs”.
3. At the end of this norm foot not shall be amended to read as under:-
“Note: The import items at Sl. No. 8,9 & 10 shall be allowed only if the export product is with Lubra Strip”.


49. 625 Engineering Product Sl.No.C951 After the import item at Sl. No. 1 the following import item (with quantity) shall be added:-

“2. Miscellaneous Items:-
Millingcutters, Settingwheels/Setting Hammers,Paints, Powder for Powder Coating, Dies & Punches, Cleaning Oil Berkatekt (Chemical),Tools & Dies”.



(cif Value restricted to 2% of FOB value)


50. 644 Engineering Product Sl.No.C995 The description of export item shall be amended to read as under:-
“CBH Plate for Starter Motor”.


51. 645 Engineering Product Sl.No.C1004 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1004 Cottor Pin (Split/ Unsplit) made of Non-alloy steel 1 kg 1.Non Alloy Steel Round/Bar 1.10 kg


52. 645 Engineering Product Sl.No.C1005 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1005 Cottor Pin (Split/ Unsplit) made of Alloy steel g 1.Alloy Steel Round/ Bar 1.10 kg


53. 691 Engineering Product Sl.No.C1166 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1166 Brass extruded Hollow sections such as pipes/ tubes 1 kg 1.Brass Scrap 1.12 kg
OR
1. Brass Ingots/ Billets 1.06 kg


54. 691 Engineering Product Sl.No.C1167 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1167 Brass extruded solid sections 1 kg 1. Brass Scrap 1.08 kg
OR
1. Brass Ingots/ Billets 1.02 kg


55. 692 Engineering Product Sl.No.C1172 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1172 Brass Wire 1 kg 1. (a) Copper Wire Bar/Cathode 1.05 kg/kg content in the export product
(b) Zinc Ingot 1.05 kg/kg content in the export product
OR
1.Brass Scrap of relevant grade 1.08 kg/kg content in the export product


56. 693 Engineering Product Sl.No.C1184 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1184 Copper Extruded Solid Sections/ Copper Rods 1 kg 1.Copper Cathode/ Copper Wire Bar/ Copper Ingot 1.05 kg
OR
Copper Scrap 1.05 kg


57. 715 Engineering Product Sl.No.C1324 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1324 Polyamide Imide Enameled Glass Fibre Yarn covered Copper Conductor 1 kg 1.Copper Wire Rod/ Cathode 1.01 kg/kg content in the export product.
2.Glass Fibre Yarn 1.01 kg/kg content in the export product.
3.Polyamide imide enamel 1.01 kg/kg content in the export product.


58. 720 Engineering Product Sl.No.C1343 The description of export item shall be amended to read as under:-
“Typewriters (Manual) with ABS Casing”.


59. 732 Engineering Product Sl.No.C1382 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1382 PVC Insulated Submersible/ flexible copper cable rating upto 1100Volts 1 kg 1.Copper Wire Rod/ Bars 1.01 kg/kg content in export product
2.PVC Compound 1.05 kg/kg content in export product
OR
2.(a) PVC Resin 60% of PVC Compound
(b) Plasticizer (PVC) 30% of PVC Compound
(c) Filler (Calcium Carbonate/Alumina/Talc/Kaoline 10% of PVC Compound
3.Tinned Copper Wire 1.01 kg/kg content in the export product
Note: Tinned Copper Wire shall be allowed in Tin Copper braided/screened flexible copper cables.


60. 734 Engineering Product Sl.No.C1391 In the description of import item at Sl. No. 7 (with quantity) shall be amended to read as under:-
“7. Outer Gasket Net to Net
OR
Synthetic Rubber Sheet (Buna/ NBR) 700 gms for 1000 Nos. Gaskets.
OR
Thermoplastic Rubber Sheet 700 gms for 1000 Nos.Gaskets


61. 735 Engineering Product Sl.No.C1394 1.In the description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:-
“1. a)(i) Primary Unalloyed Aluminium 1.02 kg/kg content in the export product
OR
a)(ii) Aluminium Scrap 1.08 kg/kg content in the export product”


62. 740 Engineering Product Sl.No.C1406 1.In the description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:-
“1. Stainless Steel Coil of relevant Grade (.3 -.5MM Thickness) 1.30 kg/kg content in export Product”
2. In the description of import item at Sl. No. 3 (without any change in quantity) shall be amended to read as under:-
“3. ISOCYNATE (MDI)”


63. 742 Engineering Product Sl.No.C1421 1.The description of export item shall be amended to read as under:-
“Electrode Holder mainly made of Copper /Brass”.
2.In the description of import item at Sl. No. 1 (without change in quantity) shall amended to read as under:-
“1. Copper Ingots
OR
Brass Scrap”.


64. 20-34 Engineering Product Sl.No.C1559-1573 (As amended vide Public Notice No. 38 dt. 1/11/2000) “The SION entries at Sl. Nos. C-1559 to C-1573 of Engineering Group shall be deleted and restored at Sl. Nos. B-232 to B-246 of Electronic Group (Category B)”
65. 14 Food Product Sl.No.E-75 (As amended vide Public Notice No. 36 Dated: 03/10/2000) The quantity of import item at Sl. No. 1 shall be amended to read as under:-
“1. 568 MT”
66. 14 Food Product Sl.No.E-76 (As amended vide Public Notice No. 36 Dated: 03/10/2000) The quantity of import item at Sl. No. 1 shall be amended to read as under:-
“1. 529 MT”
67. 14 Food Product Sl.No.E-77 (As amended vide Public Notice No. 36 Dated: 03/10/2000) The quantity of import item at Sl. No. 1 shall be amended to read as under:-
“1. 754 MT”
68. 14 Food Product Sl.No.E-78 (As amended vide Public Notice No. 36 Dated: 03/10/2000) The quantity of import item at Sl. No. 1 shall be amended to read as under:-
“1. 955 MT”
69. 832-834 Leather Products Sl.No.G-23 At the end of this entry the Foot Note No.2, shall be added:-
“Note 2:- For requirement of Chemicals, finished Leather required per pair is ( i ) 7.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 7 sq. ft. if item 1(a) is not asked for, (iii) 4.15 sq.ft. if item 1(b) is not asked for, and (iv) 3.75 sq. ft. if 1(a) & (b) are asked for”.
70. 834-835 Leather Products Sl.No.G-24 At the end of this entry the Foot Note No. 1 shall be added:-
“Note 1:- For requirement of Chemicals, finished Leather required per pair is ( i ) 7.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 7 sq. ft. if item 1(a) is not asked for, (iii) 4.15 sq.ft. if item 1(b) is not asked for, and (iv) 3.75 sq. ft. if 1(a) & (b) is asked for”.
71. 835-836 Leather Products Sl.No.G-25 At the end of this entry the Foot Note No. 2 shall be added:-
“Note 2:- For requirement of Chemicals, finished Leather required per pair is ( i ) 9.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9 sq. ft. if item 1(a) is not asked for, (iii) 5.15 sq.ft. if item 1(b) is not asked for, and (iv) 4.75 sq. ft. if 1(a) & (b) are asked for”.
72. 837 Leather Products Sl.No.G-26 At the end of this entry the Foot Note No. 2 shall be added:-
“Note 2:- For requirement of Chemicals, finished Leather required per pair is 1.25 sq.ft. per pair”.
73. 838-840 Leather Products Sl.No.G-28 At the end of this entry the Foot Note No. 2 shall be added:-
“Note 2:- For requirement of Chemicals, finished Leather required per pair is ( i ) 3.65 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.25 sq. ft. if item 1(b) is not asked for, (iii) 2.15 sq.ft. if item 1(c) is not asked for, and (iv) 1.75 sq. ft. if 1(a) & (c) are asked for”.
74. 846-847 Leather Products Sl.No.G-40 At the end of this entry the Foot Note No. 2 shall be added:-
“Note 2:- For requirement of chemicals, a norm of 2.5 sq. ft. of finished leather per pair may be considered”.
75. 880-881 Plastics Products Sl.No.H-120 In the description of import item at Sl. No. 7(a) (without any change in quantity) shall be amended to read as under:-
“7(a) Tyvek (coated or uncoated) of relevant GSM”.
76. 934-935 Plastics Products Sl.No.H-367 At the end of this entry the foot not shall be added:-
Note: Where export is not on Bobbin, the item – Polypropylene Granules, shall not be allowed for import”.
77. 17 Plastics Products
Sl.No.H-417 (As amended vide Public Notice No. 36 dt.03.10.2000)		 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
H417 Prepared Adhesives Based on Plastics (Two Component Laminating Adhesives)
A. Adhesive (80% resin content and 20% solvent)



B.Additive (50% resin content and 50% solvent)		 1 kg







1 kg		 1.Adipic Acid 0.130 kg
2.Isophthalic Acid 0.373 kg
3.Monoethylene Glycol 0.069 kg
4.Diethylene Glycol 0.281 kg
5.1,6 Hexanediol 0.022 kg
6.Ethyl Acetate/ Methyl Ethyl Ketone (relevant) 0.200 kg
1.Adipic Acid 0.011 kg
2.Isophthalic Acid 0.035 kg
3.Monoethylene Glycol 0.030 kg
4.Diethylene Glycol 0.057 kg
5.1,6 Hexanediol 0.002 kg
6.Ethyl Acetate 0.500 kg
7.Toluene Di isocyanate 4,4 Diphenylmethane Di Isocyanate (MDI) (relevant) 0.372 kg


78. 17 Plastics Products Sl.No.H-418 (As amended vide Public Notice No. 36 dt.03.10.2000) The norm covered by this entry shall be deleted.
79. 18 Plastics Products Sl.No.H-420 (As amended vide Public Notice No. 36 dt.03.10.2000) The description of export item shall be amended to read as under:-
“Cast Polypropylene Film (Transparent)”
80. 18 Plastics Products
Sl.No.H-421 (As amended vide Public Notice No. 36 dt.03.10.2000)		 The description of export item shall be amended to read as under:-
“Cast Polypropylene Film (White Opaque)”
81. 34 Plastics Products Sl.No.H-433 (As amended Public Notice No. 42 Dated: 01/12/2000) The description of export item shall be amended to read as under:-
“Plastic Knitting Pins/ Needles including reinforced Plastic Knitting Pins/ Needles made of Cellulose Acetate”.
82. 964 Textile Products Sl.No.J-32 The norm covered by this entry shall be substituted by the following:-


Sl.No. Export Item Qty. Import Item Qty. Allowed
J32 Dyed and/or printed synthetic blanket made of acrylic fibre and/or acrylic

Yarn and Polyester Filament Yarn		 1 kg 1.Acrylic Fibre 1.24 kg/kg content in the export product
OR
1.Acrylic Yarn 1.15 kg/kg content in the export product
2.Polyester Filament yarn 1.05 kg/kg content in the export product
3.Lylex cloth Net to net
4.Cationic Dyes (Acrylic Dyes 100% strength) 2% of Acrylic content in export


83. 975 Textile Products Sl.No.J-72 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J72 Printed Acrylic Blankets/Acrylic Blankets 1 kg 1.Acrylic Fibre/ tow/ tow waste 1.24 kg/kg content in the export product
OR
Acrylic Yarn 1.15 kg/kg content in the export product
2. Cationic Dyes of 100% strength (only for printed export product) 2% of Acrylic content in export


84. 991 Textile Products Sl.No.J-144 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J-144 Blouson with or without lining 1 NO. 1.fabric to be used in the garment 3.35 Sq.Meter
2.Lining Fabric to be used in the garment 3.01 Sq.Meter
Note: Item No. 2 shall be allowed, if the export product is with lining.


85. 991 Textile Products Sl.No.J-148 The description of export item shall be amended to read as under:-
“Girls/Boys Shorts”


86. 994 Textile Products Sl.No.J-171 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J171 Dyed/Printed Readymade Garments fitted with or without beads, sequins, chattons etc. and with or without lining 1 kg 1.Fabric to be used in the garment 1.1 kg/per kg content in the export product
2.Beads, Sequins, Chattons etc. Net + 1% wastage
3.Lining to be used in the garments Net + 5% wastage
Note: 1. Import item No. 2 shall be allowed, if the export is filled with Beads, Sequins, Chattons etc.
2. Import Item No. 3 shall be allowed, if the export product is filled with lining material.


87. 1009 Textile Products Sl.No.J-267 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J267 Men’s Long Sleeve Quilted Shirt 1 pc 1.Quilted fabric 2.45 sq.mtr.
OR
1.Fabric to be used in the garment (outer fabric) 2.45 sq.mtr
2.Relevant inner fabric 2.45 sq.mtr
3.Polyester Staple Fibre 140 gms


88. 14 Textile Products Sl.No.J-318 (As amended vide Punblic Notice No.25 Dated: 01.08.2000) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J-318 Scarves/ Stoles/ Pareo/ Handkerchief 1 Sq.metre 1.Fabric to be used in the export product 1.01 Sq.mtr./ sq.mtr. content in the export product


89. 1024 Miscellaneous Product Sl.No.K-41 The description of import item at Sl. No. 3 (without any change in quantity) shall be amended to read as under:-
“3. Pouches (made of coated paper laminate with polyester / Polyethelene Pouches)


90. 1 GENERAL NOTES FOR ALL EXPORT PRODUCT GROUP In the General Notes, Note No. 6 shall be substituted to read as under:-
“6. Unless specified, otherwise, the import of components wherever allowed shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No., if any), etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in export documents (shipping bills) also”.

Annexure “B” to the
Public Notice No.04
Dated: 31/03/2001

 

CHEMICALS AND ALLIED PRODUCTS


Sl.No. Export Item Qty. Import Item Qty. Allowed
A2553 Lauryl Alcohol 9 Mole Ethoxylate 1 kg 1.Lauryl Alcohol 0.332 kg
A2554 Polyethylene Wax Stearate Mixture containing 60% Stearic Acid, 30% Polyethylene wax and 10% Paraffin wax 1 kg 1.Stearic Acid 0.612 kg
2.Polyethylene Wax 0.306 kg
3.Paraffin Wax 0.102 kg
A2555 Salicylamide 1 kg 1.Phenol 1.003 kg
A2556 2, 2 Azobis (2 amidino propane) Dihydrochloride (Mikrofine AZPH) 1 kg 1.Acetone Cyanohydrin 1.20 Kg
2.Hydrazin Hydrate 80% 0.385 kg
3.Dicumyl Peroxide 0.05 kg
4.Toluene 1.80 Ltr.
5.Methanol 2.32 Ltr.
6.Ammonia 0.334 kg
A2557 Lauryl Benzyl Ammonium Chloride 80% 1 kg 1.Dimethyl Lauryl Amine 0.513 kg
2.Benzyl Chloride 0.288 kg
A2558 Aqueous solution of Copolymers of Acrylamide and DMDAAC in the moles Ratio of 1.79:0.80 and Active Content of 8.1% to 9% 1 kg 1.Acrylamide 0.050 kg
2.Dimethyl Dially Ammonium Chloride 0.052 kg
A2559 ‘Buflomedil Hydrochloride’ 1 kg 1.Pyrolidine 0.767 kg/kg
2.4-Chloro Butyryl Chloride 2.03 kg/kg
A2560 4-Amino-2-Methoxy-5-Nitroben-zoic Acid 1 kg. 1.Methopabate 1.65 kg.
2.Dimethyl Formamide 0.52 kg.
A2561 2-Methoxy Phenothia-zine 1 kg. 1.Resorcinol 2.49 kg
2.Triphenyl Phosphine 0.40 kg
3.Iodine 0.28 kg
4.Potassium Carbonate 0.80 kg
5.Methyl Ethyl Ketone 2.41 kg
6.Methylene Chloride 1.40 kg
7.1,4 Dioxane 2.21 kg
A2562 Dodecyl Trimethyl Ammonium Chloride 1 kg. 1.Dodecyl Dimethyl Amine 1.66 Kg.
2.Isopropyl Alcohol 3.17 Kg.
3.Methyl Ethyl Ketone 3.63 Kg.
4. Activated Carbon 50 gm.
A2563 Quinaldic Acid 1 kg 1.Quinoline 1.75 kg/kg
2.Tetra Hydro-furan 1.485 kg/kg
A2564 2-Amino,3,5 Dibromo Benzalde-hyde 1 kg 1.Methyl Anthranilate 0.96 Kg
2.Solium Borohydride 0.336 Kg
3.Manganese Dioxide 1.44 Kg
4.Tetra Hydrofuran 1.67 Kg
5.Methanol 2.00 Kg
6.Ethylene Dichloride 2.50 Kg
A2565 Benzyl Triphenyl Phosphonium Chloride 1 kg 1.Triphenyl Phosphine 0.84 kg.
2. 2-Methyl Ethyl Ketone 0.50 kg.
A2566 Myristyl Dimethyl Benzyl Ammonium Chloride Dihydrate 1 kg. 1.Myristyl Dimethyl Amine (Farmin DM 40) 1.09 Kg.
2.Dimethyl Formamide 0.05 Kg.
A2567 4-Chloro Salicylic Acid 1 kg. 1. 2,4-Dichloro Benzoic Acid 1.54 kg.
A2568 Cetyl Trimethyl Ammonium Bromide 1 kg. 1.Cetyl Dimethyl Amine 1.136 kg.
2.Sodium Bromide 85% 0.65 kg.
3.Methyl Ethyl Ketone 0.25 kg.
4.Methylene Chloride 0.50 kg.
A2569 Articaine HCL 1 kg. 1.Methyl Acrylonitrile 0.44 kg.
2.Thioglycolic Acid Methyl Ester 0.70 kg.
3. (+)-2 Bromo-propionyl Bromide 0.94 kg.
4. 1-Propyl Amine 0.26 kg.
A2570 D-Naproxen D-Amino Butanol Salt 1 kg. 1.Beta Naphthol 1.785 Kg.
2.Methanol 6.00 Kg.
3.Acetyl Chloride 1.21 Kg.
4.Nitromethane 0.842 Kg.
5. Potassium Hydroxide 3.03 Kg.
6. 2-Butanol 2.68 Kg.
7.Hydroxylamine HCL 0.90 Kg.
8.Ethylene Dichloride 1.78 Kg.
9.D-2 Amino Butanol 0.388 Kg.
A2571 Dimethyl Phenoxy Acetic Acid 1 kg. 1.2,6 Dimethyl Phenol 2.00kg./kg
2.Methanol 4.25kg./kg.
A2572 N Cyanoethyl Aniline 1 kg. 1.Aniline 0.67 kg/kg
2.Acetonitrile 0.38 kg/kg
A2573 1-Cyanocyclo-hexane Ethylester Acetic Acid 1 kg. 1.Di-N-Propyl Amine 0.144 kg.
A2574 Barium Sulphate BP/USP 1 kg. 1.Barium Chloride Dihydrate 1.10 kg.
A2575 Quinine Sulphate IB/BP/USP 1 kg. 1.Cinchona Bark Extract (Containing 70 to 85% Quinine) 1.40 kg.
A2576 Calcium Citrate USP 1 kg. Citric Acid Monohydrte 0.857 kg.
A2577 Alfa (2-Methyl Amine Ethyl Benzene Methanol 1 kg. 1.Acetophenone 2.04 Kg.
2.Sodium Borohydride 0.68 Kg.
3.Para Formaldehyde 0.98 Kg.
4.Palladium on carbon 30 gm.
5.Isopropyl Alcohol 4.11 Kg.
6.Methylene Chloride 2.99 Kg.


A2578 5 Amino-3-Amino Methyl Benzoic Acid (AAMBA) Sulphate Monohydrate 1 kg. 1.Methyl Chloro Acetate 5.08 Kg.
2.Para-Chloro Benzoic Acid 2.40 Kg.
3.Methanol 2.85 Kg.
4.Ethylene Dichloride 4.10 Kg.
5.5% Palladium on Carbon 0.024 Kg.
A2579 Tetrephenyl Phosphonium Bromide 1 kg. 1.Triphenyl Phosphine 0.993 kg.
2.Activated Carbon 50 gm
3.Methyl Isobutyl Ketone 0.50 kg.
4.Methyl Ethyl Ketone 0.50 kg.
A2580 Ibuprofen Lysinate (Sodium Metal Route) 1 kg. 1.Isobutyl Benzene 0.65 kg.
2.Acetyl Chloride 0.49 kg.
3.Isopropyl Alcohol/Methanol 0.685 kg.
4.Sodium Metal
(a) Monochloro Acetic Acid

(b) (b)Isopropyl Alcohol		 0.19 kg.

0.85 kg.

0.67 kg.
5. 6.DL-Lysine(50%) 0.97 kg.
A2581 S-Ibuprofen (Sodium Metal Route) 1 kg. Isobutyl Benzene 1.228 Kg.
Acetyl Chloride 0.93 Kg.
Isopropyl Alcohol/ Methanol 1.30 Kg.
Sodium Metal 0.37 Kg.
Isopropyl Chloro Acetate 2.34 Kg.
OR
(i) Monochloro Acetic Acid 1.62 Kg.
(ii) IPA 1.24 Kg.
(S)-3-Methyl-2-Phenyl Buty-lamine 0.19 Kg.
A2582 Ibuprofen Sodium (Sodium Metal Route) 1 kg. 1.Isobutyl Benzene 1.00 Kg.
2.Acetyl Chloride 0.75 Kg.
3.Isopropyl Alcohol/Methanol 1.05 Kg.
4.Sodium Metal 0.30 Kg.
5.A) Monochloro Acetic Acid

(B) Isopropyl Alcohol		 1.32 Kg.

1.00 Kg.
A2583 DL Naproxen 1 kg. 1.Beta Naphthol 2.05 Kg.
2.Acetyl Chloride 1.38 Kg.
3.Nitromethane 0.96 Kg.
4.Potassium Hydroxide 1.73 Kg.
5.Hydroxyl Amine Hydrochloride 1.03 Kg.
6.2-Butanol 3.07 Kg.
7.Toluene 1.64 Kg.
8.Methanol 6. 00 Kg.
9.Ethylene Dichloride 1.97 Kg.
A2584 Trimethyl Sulphoxonium Iodide 1 kg. 1.Iodine 0.75 kg.
2.Dimethyl Sulfoxide 0.41 kg.
3.Methanol 0.67 kg.
A2585 Secnidazole 1 kg. 1.Glyoxal 40% 3.00 Kg.
2.Propylene Oxide 6.20 Kg.
3.Formic Acid 4.91 Kg.
4.Methyl Isobutyl Ketone 1.55 Kg.
5.Activated Carbon 0.10 Kg.
A2586 Undecylenic Aldehyde 1 kg. 1.Formic Acid 98% Purity 1.55 kg.
A2587 Halothane BP 250 ml. 250 ml. 1.Chloro Trifluro Dibromo Ethane 0.811 kg. Per 250 ml of Halothane
A2588 N-Tert.Butyl Decahydro Isoquinoline-3-(S)-Carboxamide (Cis-Decahydro Carboxamide) 1 kg. 1.L-Phenyl Alanine 4.11 Kg.
2.Tert. Butyl Amine 3.96 Kg.
3.Benzyl Chloroformate 3.96 Kg.
4.L-(+)-Tartaric Acid 1.28 Kg.
5.5% Ruthanium

OR

Rhodium on Charcoal/Carbon/Aluminium		 0.058 Kg.
A2589 Galaxy Les 370 (Sodium Lauryl Ether Sulfate Min. 69% active matter based on Lauryl Alcohol 3 Mole Ethoxylate) 1 kg. 1.Lauryl Alcohol 0.3408 kg.
2.Sulphur 0.0548 kg.
3.Caustic Soda Flakes 0.0685 kg.
A2590 9-Fluorenyl Methyl Chloroformate (FMOC Chloride) 1 kg. 1.Fluorene 1.70 Kg.
2.Dimethyl Formamide 5.10 Kg.
A2591 Nabumetone 1 kg. 1.Beta Naphthol 2.18 Kg.
2.Methanol 6.98 Kg.
3.Acetyl Chloride 2.18 Kg.
4.Nitromethane 2.00 Kg.
5.Sodium Methoxide Power 0.93 Kg.
6.Ethylene Dichloride 1.31 Kg.
A2592 3-Bromoquinoline 1 kg. 1. Quinoline 0.88 kg.
A2593 3,5,6 Trichloro Salicylic Acid 1 kg. 1.Salicylic Acid 1.39 kg
2.Caustic Soda 1.10 kg
3.Acetic Acid 1.77 kg
4.Methylene 1.62 kg
5.Methanol 0.16 kg
A2594 Phthalazine 1 kg. 1.Phthalal Dehyde 1.47 Kg.
2.Hydrazine Hydrate 0.70 Kg.
3.Isopropyl Alcohol 1.00 Kg.
A2595 2,4,6 Trichloropyri-midine 1 kg. 1.Diethyl Malonate 2.21 Kg.
2.Sodium Metal 0.37 Kg.
3.Phosphorous Oxychloride 3.10 Kg.
4.Tri Ethyl Amine 2.04 Kg.
5.Methyl Isobutyl Ketone 2.04 Kg.
6.Carbon Tetra Chloride 1.64 Kg.
A2596 4-(Methyl Amino Benzoic Acid) 1 kg. 1.Benzocaine

OR

4-Amino Benzoic		 2.12 Kg.
2.Tetrabutyl Ammonium Bromide 0.27 Kg.
3.Potassium Hydroxide 2.26 Kg.
4.Methanol 2.225 lit./Kg
A2597 1 -Ethyl-6,7,8-Trifluoro-1,4-Dihydro-4-Oxo-3-Quinoline Ethyl Carboxylate (Lomefloxacin Intermediate) 1 kg. 1.2,3,4-Trifluoro aniline 0.92 Kg.
2.Ethyl Ethoxy Methylene Malonate (EMME) 1.36 Kg.
3.Diethyl Sulphate 1.06 Kg.
4.Dimethyl Formamide Acetonitrile 3.76 Kg.
A2598 Halothane BP (in bottles) 1 kg. 1. Halothane Technical 1.04 kg.
A2599 4-(2-Aminoethyl) Benzene Sulfonamide 1 kg. 1.Beta Phenyl Ethyl Amine 1.60 Kg.
2.Isopropyl Alcohol 1.54 Kg.
3.Methyl Ethyl Ketone 1.92 Kg.
4.Potassium Carbonate 0.77 Kg.
5.Activated Carbon 50 gm.
A2600 Flunarizine HCL 1 kg. 1.4-4, Difluoro-Benzophenone 1.474 Kg.
2.Sodium Boro Hydride 0.138 Kg.
A2601 Quinine Hydrochloride 1 kg. 1.Cinchona Bark Extract (Containing 70 to 85% Quinine) 1.62 kg.
A2602 Quinine Dihydrochloride 1 kg. 1.Cinchona Bark Extract (Containing 70 to 85% Quinine) 1.80 kg.
A2603 Quinine Bisulphate 1 kg. 1.Cinchona Bark Extract (Containing 70 to 85% Quinine) 1.24 kg.
A2604 Strong Cetrimide Solution (BP) 40% 1 kg. 1.Myristyl Dimethyl Amine 0.42 kg.
2.Iso Propyl Alcohol 0.364 kg.
A2605 Imazethapyr 5% EL (pursuit 50 A) 1 Lit. 1.Imazethapyr Tech 90% (Pursuit Tech 90%) 0.057 kg.
2.Wetting Agent (Nonyl Phenol Ethoxylate based 8-11 Moles ethylene oxide) (Such as Creslox 3416/ Synperonic NP-8) 0.250 kg.
3.Silicone Antifoam Agent(Silcolape 5000) 1.00 gm.
A2606 S+ Ibuprofen (Neo Pentyl Glycol route) 1 kg. 1.Isobutyl Benzene 1.30 Kg.
2.2-Chloro Propionic Acid 1.19 Kg.
3.Neo Pentyl Glycol 1.20 Kg.
4.Ethylene Dichloride 0.32 Kg.
5.Thionyl Chloride 1.40 Kg.
A2607 Vitamin B 12 (Cyano Cobalamin) USP 1 kg. 1.Beet Molasses 4775.80 Kg.
2.5,6 Dimethyl Benzimidazole 1.40 Kg.
3.Nulristin Betain Anhydrous 120.17 Kg.
4.Hydrogen Per Oxide 29.33 Kg.
5.Monosodium Glutamate 58.75 Kg.
6.Acetone 217.10 Lit.
7.Resin Amberlite IRC-50 29.40 Lit.
A2608 Cemgrind (TAC) Containing 60% of Triethanalamine and 23% Acetic Acid 1 kg. 1.Triethanol Amine 0.605 kg.
2.Acetic Acid 0.234 kg.
A2609 Ferric Ammonium Citrate FP 73 1 kg. 1.Citric Acid Monohy-drate 0.70 kg.
A2610 4-Chloro Methyl-2-Guanidinotia Zol Hydrochloride 1 kg. 1.1,3 Dichloro Acetone 0.70 kg.
2.Gunyl Thiourea 0.65 kg.
A2611 2-Amino Methyl-7-Chloro-1,3-Dihydro-5-(2-Florophenyl)1H-1,4 Benzodiazepine, Di Maleate (Amino Dimaleate) 1 kg. 1.2-Amino-5-Chloro-2-Fluoro Benzophenone 1.70 Kg.
2.Chloro Acetaldehyde Dimethyl Acetal/Diethyl Acetal 1.024 Kg.
3.Manganese Dioxide 1.82 Kg.
4.Raney Nickle 0.163 Kg.
5.Dimethyl Sulfoxide 1.70 Kg.
6.Acetone 2.50 Kg.
A2612 Cystofer Base 1 kg. 1.Cysteamine HCL 0.62 kg.
2.Furfuryl Alcohol 0.68 kg.
3.Paraformal-dehyde 0.42 kg.
4.Isopropyl-alcohol 1.00 kg.
A2613 Veratrol(1,2-Dimethoxy Benzene 1 kg. 1. Pyro Catechol 1.04 kg.
A2614 Phthalimido Amilodipine 1 kg. 1.Phthalic Anhydride 1.20 Kg.
2.Sodium Hydride 0.75 Kg.
3.Orthochloro Benzaldehyde 0.70 Kg.
4.Ethyl-4-Chloro Aceto Acetate 1.15 Kg.
5.Methanol 2.06 Kg.
6.Toluene 1.23 Kg.
7.Ethyl Acetate 2.58 Kg.
A2615 Cis PQ Carbonate 1 kg. 1.Quinoline 3.40 Kg.
2.Propargyl Alcohol 1.73 Kg.
3.Triphenyl Phosphine 0.46 Kg.
4.Sodium Tert. Butoxide 3.36 Kg.
5.Para Toluene Sulphonyl Chloride 3.36 Kg.
6.N,N,N,N Tetra Methyl Ethylene Diamine 0.015 Kg.
7.Methyline Dichloride 2.20 Kg.
8.5% Palladium on Carbon 50 gm.
A2616 Monochloro Acetic Acid 1 kg. 1.Acetic Acid Glacial 0.663 kg.


A2617 Nabumetone 1 kg. 1.Beta Naphthol 1.18 Kg.
2.Methanol 6.98 Kg.
3.Acetyl Chloride 2.18 Kg.
4.Nitromethane 2.00 Kg.
5.Sodium Methoxide Power 0.93 Kg.
6.Ethylene Dichloride 1.31 Kg.
A2618 Cetyl Trimethyl Ammonium Chloride Solution 50% 1 kg. 1.Cetyl Dimethyl Amine (Farmin-60) 0.42 kg.
2.Isopropyl Alcohol 0.23 kg.
A2619 Di Calcium Phosphate 1 kg. 1. Phosphoric Acid 89% 0.89 kg.
A2620 CIS Mesylate (CIS-2(2,4-Dichlorophenyl)-2(1H-Imidazole-1-YL-Methyl)-1,3-Dioxolan-4-YL)Methyl Methanesulfonate (CIS-Mesylate) 1 kg. 1.2,4 Dichloro Acetophenone 3.64 Kg.
2.Imidazole 1.32 Kg.
3.Bromine 1.07 Kg.
4.Toluene 1.41 Kg.
5.Methanol 9.08 Kg.
A2621 Dimethyl Aminopropylarnine 1 kg. 1.Methanol 0.700 kg.
2.Acrylonitrile 0.570 kg.
3.Alumina Silica 0.00013 kg.
A2622 Terbinafine HCL 1 kg 1.Pinacalone 2.32 kg
2.Acrolein 1.15kg
3.5% palladium on carbon 0.083 kg
4.Tetrahydrofuran 2.90 kg
5.Dimethyl Formamide 2.90 kg
6.Dimethyl Sulfoxide 1.85 kg


A2623 Fluoxetin HCL USP 1 kg 1.Para Chloro Benzo Triflouride 1.36 kg
2.Acetophenone or Beta Chloro Propionyl Chloride 1.022kg
3.Sodium Borohydride 0.08kg
4.Sodium Hydride 0.26 kg
5.Dimethyl Sulphoxide/ Dimethyl Acetamide 2.85 kg
6.Isopropyl Alcohol/ Acetonitrile 1.95 kg
7.Acetone 1.00kg
8.5% palladium on carbon 100 gm/kg
A2624 Isoniazid BP/USP Kg 1.Gamma Picoline

Or

Cyano Pyridine		 1.10 Kg/Kg

0.98 Kg/Kg
2.Hydrazine Hydrate (100% basis) 0.45 Kg/Kg
3.Activated Carbon 0.100 Kg/Kg
A2625 2,5 Dichloro Nitro Benzene 1 kg 1.Benzene 0.517 kg
A2626 Para Chloro Orthonitro Aniline 1 kg 1.Benzene 0.620 kg
A2627 2,4 Dinitro Chloro Benzene 1 kg 1.Benzene 0.478 kg
A2628 Trazadone HCL USP 1 kg 1.2-Chloro Pyridine 1.13 Kg
2.Semi Carbazide HCL 2.22 Kg
3.1-Bromo-3- Chloropropane 1.97 kg
4. Chloroform 5.77 Kg
5. 2 Ethoxy Ethanol 2.32 Kg
A2629 Tiaprogenic Acid EP 1 kg 1.Thiophene 1.83 Kg
2.Sodium Cyanide 1.23 Kg
3.Methylene Chloride 7.87 Kg
A2630 1-Acetyl 4-(4-Hydroxyphenyl) Piperazine 1 Kg. 1.Diethyanolamine 1.73 Kg
2.Thionyl Chloride 2.52 “
3.Ethyl Dichloride/1,2 Dichloro Ethane 2.63 “
4.Para Amino Phenol 1.61 “
5.Acetone 0.99 Lit/Kg
6.Methanol 2.41 “ “
A2631 2-Trifluormethyl Phenothiazine 1 Kg. 1.2-Amino Benzothiazine 2.36Kg
2.Bromo Benzene 1.86 kg
3.Mono Chloro Benzene 1.86 kg
4.Toluene 5.00 Lit/Kg
A2632 Para Dichloro Benzene 1 Kg 1. Benzene 0.630 Kg.
A2633 3,4 Dichloro Nitro Benzene 1 Kg 1. Benzene 0.540 Kg.
A2634 1-(P-methoxy benzyl)-3,4,5,6,7,8-Hexahydro Isoquinoline (Racemic Octabase/ (+)Octabase/(-) octabase 1 kg 1.Para- Anisaldehyde 1.60 kg
2.Sodium Borohydride 0.43 kg
3.Sodium Cyanide 0.84 kg
4.Methylene Chloride 2.41 kg
5.Potassium Hydroxide 1.33 kg
6.Methanol 1.74 kg
7.Tartaric Acid 0.74 kg
A2635 1-(P-Methoxy Benzyl)-3,4,5,6,7,8- Hexahydro Isoquinoline Mandelate(-) Octabase Mandalate) 1 kg 1.Para- Anisaldehyde 1.12 kg
2.Sodium Borohydride 0.30 kg
3.Sodium Cyanide 0.59 kg
4.Methylene Chloride 1.68 kg
5.Potassium Hydroxide 0.93 kg
6.Methanol 1.22 kg
7.D(-) mandelic Acid 0.52 kg
A2636 DMAB Sulfethanolamine (5 Amino – 1.2 Xylene-3- Sulfo-2- hydroxy Ethyl amide-moist) 1 kg 1.Nitro Xylene 1.078 kg
2.Mono Ethanolamine 0.801 kg
A2637 Finasteride 1 kg 1. N,N-Dicyclohexil Carbo dimide 1.50 kg
2. 2,3 Dichloro-5, 6-Dicyano-1,4-Benzoquinone 0.86 kg
3.1-Hytdroxy Benzotriazole 1.00 kg
4.Tert. Butylamine 1.07 kg
5.16-DPA 12.5 kg
6.Bis-Trimethyl Silyl trifluoro Acetamide 1.47 kg
7.5% palladium on carbon 0.100 kg
8.Methylene Chloride 7.50 kg
9.Chloroform/1, 4 Dioxane 12.50 kg
10.Sodium Meta Periodate 9.30 kg
A2638 Michler’s Hydrol (Purity on 100% dry basis) 1 kg 1.Dimethyl Aniline (N N Diemethyl Aniline) 1.440 kg
2.Litharge (Lead Peroxide) 0.208 kg
3.Per Chloro Ethylene 0.250 kg
A2639 Propionyl Yara Yara (1- (6-methoxy –2-Napthyl)-1- Propanone Priopio 1 kg 1.Beta Napthol 1.07 kg
2.Methanol 0.47 kg
3.Propionyl Chloride 0.68 kg
4.Ethylene dichloride 0.94 kg
A2640 Coated Duplex Board Grey back/ Coated Board Grey back 1 MT 1.Soft Wood Pulp 0.2362 MT
2.Waste paper 0.6869 MT
3.Carbaoxy Methyl Cellulose 0.001 MT
4.Latex (SBR) 50% DRC 0.027 MT
5.Kaolin 0.08 MT
6.Calcined Clay 0.0030 MT
7.Rosin 0.009 MT
8.Calcium Carbonate 0.440 MT
A2641 Coated White Liner 1 MT 1.Soft wood Pulp 0.2548 MT
2.Waste paper 0.6390 MT
3.Carbaoxy Methyl Cellulose 0.0009 MT
4.Latex (SBR) 50% DRC 0.0177 MT
5.Kaolin 0.0260 MT
6.Polymin SK 0.009 MT
7.Rosin 0.009 MT
8.Calcium Carbonate 0.0360 MT
A2642 Release Base Paper – 50 GSM 1 kg 1.Hardwood Pulp 0.414 kg
2.Bagasse 0.518 kg
A2643 MCIR cheque Paper 95+ 5 GSM 1 kg 1.Relevant Wood pulp 1.013 kgs
A2644 Tracing Paper 60-65 GSM 1 kg 1. Relevant Wood Pulp 1.040 kg
A2645 Bible Paper 40+5 GSM 1 kg 1.Relevant Wood Pulp 0.937 kg
A2646 Flooring Parquet 1 Cubic Feet 1.Timber Round logs of relevant specis Two Cubic Feet
A2647 Grease Gum Hoses of different sizes 1 kg 1.Relevant Thermo-plastic High Pressure Hose of relevant size Net content + 1.5% wastage
A2648 Dhopp Batti 1 kg 1.Gum Benjamin/ Gum Damar 0.30 kg
A2649 Zirconium Oxide Macro Micro grinding media in various shapes and sizes (containing 83% Zirconium oxide and 17% cerium oxide) 1 MT 1.Zirconium Dioxide 872 kgs
2.Cerium Oxide 178 kgs
3.Ammonium Alginate/ Acrylic emulsion binders 50 kgs
4.Nitride bonded Silicon Carbide refractory trays/ Slabs/ Plates/ Frames 8 Nos. per MT
A2650 Tipping Paper (white) for Cigarette 1 MT 1. Bleached Sulphate Pulp 709 kg
2.Titanium Di-oxide 38.7 kg
3.Precipitated Calcium Carbonate 258 kg
A2651 Uracil – Technical 1 kg 1. Malic Acid 2.50 kg
A2652 Polysulphide Sealant (Pouring Grade/Gun Grade) containing 28% (by weight) Liquid Polysulphide Polymer 1 kg 1.Liquid Polysulphide Polymer 0.28 kg
Note: In the case of variation in the content of Liquid Polysulphide Polymer in the export product, the imported raw material may be allowed on pro-rata basis.
A2653 2,2’- Azobis (2 Amidino Propane) Dihydrochloride (Mikrofine AZPH) 1 kg 1.Acetone Cyanohydrin 1.20 kg
2.Hydrazin Hydrate 80% 0.385 kg
3. Dicumyl Peroxide 0.05 kg
4. Toluene 1.80 litres
5. Methanol 2.32 litres
6. Ammonia 0.334 kg
A2654 Polyethylene Glycol – 200 1 MT 1. Di-Ethylene Glycol 509 kgs
2. Potassium Hydroxide 1.0 kg
3. Acetic Acid 1.00 kg
A2655 Zinc Dibenzene Sulphinate Dihydrate 1 kg 1. Zinc Oxide 0.250 kg
2. Sodium Sulfite 0.787 kg
1. Caustic Soda Lye (50%) 0.986 kg
A2656 PVC Erasers 1 kg 1. PVC Resin 0.258 kg
2. D.O.P. 0.366 kg
2. Calcite Powder 0.416 kg
3. Titanium Dioxide 0.010 kg
A2657 Alpha Pinene Epoxide 1 kg 1. Gum Turpentine (Alpha Pinene content 82.5%) 1.120 kg
A2658 3-Cyano 4-Methyl 6-Hydroxy N-Ethyl 2-Pyridone 1 kg 1. Methyl Cyano Acetate 0.713 kg
1. Aceto Acetic Methyl Ester 0.860 kg
3. Mono Ethyl Amine (70%) 0.722 kg
A2659 Polyglycerol Polyricinolate 1 kg 1. Glycerine 0.107 kg
2. Recinoleic Acid 1.012 kg
A2660 Ceramic Yellow Inorganic Pigment containing 80% Zirconium Oxide and 7.7% of Praseodymium Oxide C.I.No.77997 1 kg 1. Zirconium Oxide 0.800 kg
2. Praseodymium Oxide 0.077 kg
A2661 Poly Ether Sulfone 1 kg 1. Phenol 0.745 kg
2. Methanol 0.116 kg
3. Dichloro Diphenyl Sulfone 0.685 kg
4. Sulfolane Aqueous (2,3,4,5 Tetrahydro Thiophene 1,1 Dioxide) 0.140 kg
A2662 4,4 Dihydroxy Diphenyl Sulfone 1 kg 1. Phenol 1.277 kg
2. Methanol 0.200 kg
A2663 E-Acid 1 kg 1. Phthalimide (90%) 1.147 kg
2. Formaldehyde (100% basis) 0.235 kg
3. Tobias Acid 1.244 kg
4. Caustic Soda (100% basis) 3.600 kg
A2664 Aluminium Metallized PVC Film 1 kg 1. PVC Film 1.10 kg
2. Aluminium Wire 0.0246 kg
3. Induction/ Evaportion Boats 0.007 Nos.
A2665 Aluminium Metallized BOPP Film 1 kg 1. BOPP Film 1.10 kg
2. Aluminium Wire 0.0246 kg
3. Induction/ Evaportion Boats 0.007 Nos.
A2666 Urinary Inconti-nence Sets 1 No. 1. PVC Compound (Medical Grade) 1.10 kg/kg content in the export product
2. Medical Grade PVC Foil/Sheeting (NRV/ Front/Rear) 1.05 sq.meter/sq.meter content in the export product
A2667 Polysulphide Sealant containing 26% (by weight) Polysulphide Polymer 1 MT 1. Liquid Hydrocarbon Resin 12.24 kg
2. Polysulphide Polymer 265.20 kg
3. Maganese Oxide 25.50 kg
A2668 Methenamine Mandelate USP 1 kg 1. DL Mandelic Acid 1.042 kg

 

Annexure “C” to the
Public Notice No.04
Dated: 31/03/2001

 

ELECTRONICS PRODUCTS


Sl.No. Export Item Qty. Import Item Qty Allowed
B231 Personal Computers (Pentium) 1 No. 1.Cabinet 1 No.
2.Mother Board 1 No.
3.Floppy Disc Drive 1 No.
4.Relevant CD ROM Drive 1 No.
5.Relevant Hard Disc Drive 1 No.
6.Switch Mode Power Supply 1 No.
7.Microprocessor (CPU) 1 No.
8.Relevant Memory Module 1 No.
9.Monitor 1 No.
10.Mouse 1 No.
11.Key Board 1 No.


Annexure “D” to the
Public Notice No.04
Dated: 31/03/2001
 

ENGINEERING PRODUCTS


C1601 Complete Rear Lamp assembly for automobiles 1 No. 1. CRCA Sheet/Strip



2. Polymethile Metaacrylate


3. Polymethile Metaacrylate (PMMA) Natural

4. Polycarbonate



5. Poly propylene Talc



6. ABS



7. Spring

8. Cut Gasket

9. Foam Seal Gasket

10. Gasket

11. Fixing Screw		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

Net to net

Net to net

Net to net

Net to net

Net to net
C1602 Lens for Rear Lamp assembly for automobiles 1 No. 1.Polymethile Meta-acrylate


2.Polymethile Meta-acrylate (PMMA) Natural		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product
C1603 Geophone Connector 1 No.
56 gms (contain-ing 43.8 gms of Thermo-plastic Polyster)		 1. Thermoplastic Polyster (Polybutylene Terephthalate) 50.4 gms
C1604 36 Fibre Optical Fibre Armoured Cable (Dia. 14 mm _+ 1mm) 1 KM/175 kg/km _+5% 1.Single Mode Optical Fibre

2.Polybutylene Terpthalate(PBT)

3.Polybutylene Terpthalate Master Batch

4.Coluring Ink (U.V.)

5.Thixotropic Jelly compound (Filling Flooding)

6.Water Blocking Tape

7.High Density Polyethylene (H.D.P.E.)

8.M.S. Tape Copolymer and Crome Plated

9.Aramid Yarn/Aramid Filament Yarn (DTEX 3160/3220)

10.Water Swellable Yarn

11.F.R.P. Rod (2 mm/ 3mm/ 1.5 mm)

12.Water Blocking RIP Cord/ Aramid RIP Cord (DTEX 1610/1680) Single/ 3Ply

13.Hot Foil Marking Tape White black		 37.800 kms.


12.440 kgs


0.250 kgs


0.380 kgs

8.610 kgs


36.750 sq.mtrs


85.730 kgs

56.62 kgs


2.910 kgs



2.690 kgs

1.050 kgs



1.080 kgs



1.050 kms
C1605 Double Parabolic Louvres (Aluminium Louvres for Light Reflection) 1 kg 1.Pre-Anodised Aluminium Coils 1.01 kg/kg content in the export product
C1606 Teflon PFA or FEP Lined Ball Valves in Assorted Size/ Weight 1 kg 1. Relevant PFA or FEP Synthetic Resin 1.05 kg/kg content in the export product
C1607 Epoxy components of different voltage rating and specification 1 kg 1. Epoxy resin Epotec



2. Hardner HY 925/Hexa Hydro Phthalic Anhydride (HHPA)/ Equivalent Grade


3. Electrolytic Copper Wire Bar


4. Mould Release Agent QZ-13

5. Semi Conducting Varnish-8001		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.01 kg/kg content in the export product

CIF value restricted to 1% of FOB value

Cif value restricted to 1% of FOB value
C1608 Diesel Generating set (specification to be indicated by the applicant) 1 No. 1. Relevant Diesel Engine

2. Relevant Diesel Alternator		 1 No.

1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1609 1200 mm Slat Chain conveyor 1 No. 1. 152.4 mm pitch elevator chain

2. Segmented Sprocket (head) 152.4 mm pitch 630 PCD

3. Segmented Sprocket (tail) 125 mm pitch 755 PCD		 On net to net basis



On net to net basis



On net to net basis
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1610 Diaphragm Actuators 1 No. 1. Diaphragm-Nitrile Rubber

2. Springs-Alloy Spring Steel

3. Fasteners-SS 304/SS 316

4. Bushes-Glacier MB 4530 DU

5. Seals-Barker Rod Seal

6. Adaptor-Swagelok SS 12-RB-4

7. Vent Protecor-Swagelok SS-MD2		 On net to net basis


On net to net basis


On net to net basis


On net to net basis


On net to net basis

On net to net basis


On net to net basis
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1611 Aluminium Rod/Bar and other extruded products 1 kg 1.Aluminium Billet 1.01 kg
C1612 Hydraulic Jack Weight 22 kgs. Model No. HJ01021 1 No. 1. Aluminium Ingots

2. Aluminium Bronze

3. Aluminium Rod

4. Square/Round/Rod (Carbon Steel)

5. Relevant Socket Lever

6. CR/HR/Steel Sheet/ Coil/Strip

7. Cold Drawn Seamless Tubes EN 24

8. MS Squares Hexagon Rods

9. Relevant Oil Seals made of Synthetic Rubber

10. High Tensile Bolts/ Nuts

11. Relevant Spring

12. Relevant Tube fitting Assembly		 8.9 kg

0.61 kg

0.40 kg

9.8 kg


1 No.

0.55 kg


1.44 kg


0.25 kg


13 Nos.


10 Nos.


4 Nos.


4 Nos.
C1613 Tungsten Carbide Inserts 1 kg 1.Tungsten Carbide powder 99.5% min. purity


2.Tantalum Carbide



3.Tantalum Niobium Carbide 70/30%



4.Cobalt Metal 98.8% min.


5.Tungsten Titanium Carbide 50/50%


6.Packing material		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

As per packing Policy
C1614 Typewriter (Manual) with Metal Casing 1000 Nos. 1. Mild Steel Strips

2. Manganese Chrome Steel Strips

3. Spring Steel Strips

4. Mild Steel Bars/Wire

5. Stainless Steel Sheet

6. Aluminium Alloy (EM-6, LM-24)

7. Zinc Ingot

8. ABS Granules



9. Type Sets		 7250 kgs

702 kgs

150 kg


920 kgs

160 kgs

4700 kgs


500 kgs

1.05 kg/kg content in the export product

Net +1% wastage
C1615 Screw/Gear Pump/ Pumpset 1 No. 1. Relevant Screws
OR
Relevant Gears

2. Relevant Electric Motor
OR
Relevant Diesel
Engine

3. Relevant Mechanical Seal

4. Relevant Pressure Relief Valve

5. Relevant Ball Bearing with SKF No.

6. Relevant coupling

7. Relevant Pump Casing Insert
1 Set



1 No.



1 No.


1 No.


1 No.


1 No.


1 No.
Note: Item No. 2 i.e. Electric Motor/Diesel Engine shall be allowed only when complete pump set is exported.All inputs imported shall be accounted for in export product.
C1616 Asbestosfree Brakelinings without Brass Chips & Nitrile Rubber 1 kg 1.Phenol Formaldehyde Resin (Powder Phenol Resin)

2.Fibreglass Chopped Strands		 0.185 kg



0.076 kg
C1617 Rechargeable Flash Light 3.6 Volt AA Size Ni-Cd Battery 1 No. 1. Ni-cd Rechargeable Battery 1.2 Volts AA Size

2. ABS Granules


3. Pre-focused Bulbs

4. Transformer		 3 Nos.

1.05 kg/kg content in the export product

1 Nos.

1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1618 Rechargeable Flash Light 2.4 Volt AA Size Ni-Cd Battery 1 No. 1.Ni-cd Rechargeable Battery 1.2 Volts AA Size

2.ABS Granules


3.Pre-focused Bulbs

4.Transformer		 2 Nos.

1.05 kg/kg content in the export product

1 Nos.

1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1619 Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery 1 No. 1. Ni-CD Rechargeable Battery 2.4 Volt

2. ABS Granules


3. Pre-focused Bulbs

4. Capacitor 0.33 mfd.

5. Capacitor 10 mfd		 1 Nos.

1.05 kg/kg content in the export product

1 Nos.

1 No.

2 Nos.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1620 Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery with twin Bulb 1 No. 1. Ni-CD Rechargeable Battery 2.4 Volt

2. ABS Granules


3. Pre-focused Bulbs

4. Capacitor 0.33 mfd.

5. Switch Single pole 3 way		 1 Nos.

1.05 kg/kg content in the export product

2 Nos.

1 No.

1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1621 Fibre Bed Mist Eliminator (Candle Filter) having Glass Fibre Filter Segments 1 No. 1.Filter Segments in Glass Fibre (Glass Wool) of relevant size In height of 1Ft. (305mm) or in multiple of 2 Ft (610mm) Segments depending upon the Ht. of the export product
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1622 Contacts (connector parts) Made of Phosphor Bronze 1 kg 1.Phosphor Bronze Strips CuSn5 1.62 kg
C1623 Ball Screw Actuator 1 No. 1. Ball Screw with Nut 1 No.
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacturer of the resultant product, which should be reflected in export documents (shipping bills) also.
C1624 Cementing Float/ Duplex/Differential shoes of different sizes 1 No. 1. Seamless casing pipes of relevant API Grade of Similar dia 1 No. of actual length of export product +1/2” extra
C1625 Stage Cementing Collars
1. For 5.1/2” Stage Cementing Collar 25.5/8” long



2. For 7” Stage Cementing Collar 25.1/2” long with outer sleeve 10.1/4” long






3. For 9.5/8” Stage Cementing Collar 25.5/8” long with outer sleeve 10.1/4” long






4. For 13.3/8” Stage Cementing Collar 34” long with outer sleeve 12.375” long
1 No.




1 No.








1 No.








1 No.
1. Seamless casing pipe in required API grade
6.062”OD X 4.7.710” ID


1. Seamless casing pipe in required API grade
7.656”OD X 6.020” ID

2. Seamless casing pipe in required API grade
8.250” OD X 7.135” ID


1. Seamless casing pipe in required API grade
10.625” OD X 8.998” ID

2. Seamless casing pipe in required API grade
11.125” OD X 9.720” ID


1. Seamless casing pipe in required API grade
14.375” OD X 12.343” ID

2. Seamless casing pipe in required API grade
14.906” OD X 13.500” ID
26.1/8” long




26” long



10.3/4” long




26.1/8” long



10.3/4” long




34.1/2” long



12.875” long
 
C1626 Galvanised High Carbon Steel Wire Ropes with Polypropelene core 1 MT 1. High Carbon Steel Wire Rods



2. Zinc



3. Polypropelene Granules
 		 1.02 MT/MT content in the export product

4% of the net weight of steel wire rods

1.05 MT/MT content in the export product
C1627 Nickel Aluminium Bronze containing different percent of Copper, Aluminium, Nickel Manganese 1 kg 1. Aluminium Scrap



2. Copper Scrap




3. Nickel


4. Manganese



5. Phosphor Copper		 1.06 kg/kg content in the resultant product

1.06 kg/kg content in the resultant product

1.02 kg/kg content in the resultant product

1.02 kg/kg content in the resultant product

0.0105 kg/kg content in the resultant product
C1628 Cementing Float/ Duplex Differential Collar of different sizes 1 No. 1. Seamless casing pipes of relevant API Grade of similar dia 1 No. of acutal length of export product +1/2” extra
C1629 Single Stage regular with rotating outlet for LPG 1 No. (260 gms) 1. Zinc Alloy A 14/AL 4 Cu 1 230 gms
C1630 Galvanised Steel Flexible Tube/ Pipe (Conduit) with 40% PVC coating (by weight) 1 kg 1. Low Carbon M S Defective Coils/Sheet

2. Zinc

3. PVC Compound (Granuls)		 0.60 kg


0.025 kg


0.425 kg
C1631 Steel Moulds of size 5150 mm long X 1181 mm Wide X 2.25 mm TK for manufacturing A.C. Corrugated Sheets 1 kg 1.HR Non Alloy Steel Sheet/ Coil 1.05 kg content in the export product
C1632 Electrical Wiring Components made of Phosphors Bronze 1 kg 1.Phosphors bronze Sheets/ Strips/Coils 1.05 kg
C1633 Electrographatised Carbon Block 1 kg 1. Pre-graphatised carbon Block 1.02 kg
C1634 Metallic Graphite Blocks containing 62% Copper 1 kg 1. Copper Powder

2. Natural Graphite Lumps		 0.64 kg

0.40 kg
C1635 PVC Insulated Unarmoured control purpose copper cable upto 1.1KV Size 36/0.23 mm (1.5sq.mm) X 3 Core 1000 Mtrs. 1.Copper Cathode/ CC Rod/ Wire Bars/ Ingots

2.PVC Resin

3.Pthalate Plasticize (DOP)

4.Fillers (Calcium Carbonate/ Alumina/ Talc/ Kaoline)		 42.315 kg


75.276 kg

37.638 kg


12.546 kg
C1636 Burning Lances (Ceramic coated CR non-alloy steel pipes filled with alloy steel wires) 1 kg 1. CR non-alloy steel Coils (Prime/ seconds)


2. Alloy Steel wire of relevant grade		 1.05 kg/kg content in the export product

1.02 kg/kg content in the export product
C1637 Spinning Card Cans 1 No. 1. HDPE Granules



2. G.P. Coils/Sheet



3. Spring Steel Wire



4. CRCA Coil/Sheet



5. Caster Wheels		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.02 kg/kg content in the export product

1.05 kg/kg content in the export product

3 Nos. (Net to net basis)
C1638 Diffuser and parts thereof namely Flower, Core, Core Assembly and outer frame in various sizes manufactured without joints from Aluminium Sheets, (Other than those manufactured from Aluminium Section/extrusions) 1 kg 1. Aluminium Ingot 1.15 kg
C1639 Copper Conductor covered with Polyester film & Glass fibre Yarn 1 kg 1. Copper Wire Rod/ Cathode



2. Glass Fibre Yarn



3. Polyester Film		 1.01 kg/kg content in the export product

1.01 kg/kg content in the export product

1.01 kg/kg content in the export product
C1640 Fibreglass Filter Bags 127 mm dia X 168 inch. Long. Top galvanised D. Cap, Bottom 80 mm Cuff with Snap ring, rings 5 nos. Carbon Steel, Fabric Style 625-5 Graf-O-Sil 1 No. 1. Fibreglass Filter Cloth

2. Fibreglass Sewing Thread

3. Stainless Steel Strip		 2 sq.yards

0.023 kg


0.02 kg
C1641 Sim Card fully personalized (with ICCID No.) 1 No. 1.Sim card pre-personalized or inactivated 1 No.
C1642 Connector Harness DC Charger Cable Assembly 1 No. 1. DC Plugs

2. PVC Insulated Cables		 2 Nos.

1.9 Meter
C1643 Platform for Electronic Balances & Weighing Systems 1 No. 1. Level Assembly

2. Load Cell of relevant load		 1 No.

1 No.
C1644 Galvanized Lamp stand made of CRCA Sheet 1 kg 1. CRC Sheet/Coils



2. Zinc		 1.05 kg/kg content in the export product

4% of net weight of steel item to be galavanized
C1645 1) Mini Dumper


2) Front end Loaded cum Dumper


3) Cement Concrete Mixer		 1 No.


1 No.


1 No.		 1. Gear Box
2. Front Axle

1. Gear Box
2. Front Axle

1. Gear Box
2. Axle
3. Hyd. Motor
4. Control Valve		 1 No.
1 No.

1 No.
1 No.

1 No.
1 No.
1 No.
1 No.
C1646 Single Mode Optical Fiber 1 KM (67 gm) 1. Silica Substrate Tube

2. Silica Sleeving Tube

3. Silica Inlet Tube

4. Silica Exhaust Tube

5. Silica Extension

6. Silicon Tetrachloride

7. Germanium Tetrachloride

8. Phosphorous Oxychloride

9. Coating of UV Resin		 7.5 gm/km

56.0 gm/km

2.1 gm/km

2.1 gm/km

7.8 gm/km

20.0 gm/km

1.5 gm/km


1.0 gm/km


50.0 gm/km
C1647 Capital Goods & Machinery Not else where Specified 1 No. Any and/or all the following components which are actually required for the machinery

COMPONENTS

1. Belt with specification

2. Motors with detailed specification

3. Timing belt


4. Switches

5. Electrical wires and cables with detailed specifications

6. Temperature Thermostat switches

7. Fasteners


8. Roller Chain



9. Gaskets of different types

10. Camshaft

11. Subassembly of Machine

12. Oilseals

13. Pulleys

14. Measuring Instrument as component

RAW MATERIAL

1. Pig iron for the cast components


2. Non Alloy Steel Plates/ coil/sheet


3. Alloy Sheet including SS plates/coil/ sheets


4. Alloy Steel/non-Alloy Steel SS Rounds/ bar


5. Brass Scrap



6. Aluminium Alloy Ingots/ Rods/Bars


7. Copper Alloy/Rods/ Bars



8. Relevant Type of plastic materials – ABS,HDPE,LDPE, PVC Compound, Nylon 6, Nylon 66

MISC. ITEMS

1. Grease

2. Paint

3. Varnish

4. Lubricating oils

5. Grinding Wheels

6. Abrassives

7. Rust Preventive Chemicals

8. Polishing Compounds






Net to net

Net to net

102m/100m content in the export product

Net to net

102 meter/100 meters in the export product

Net to net

102 No/100 No. content in the export product

102 m/100 meter content in the export product

Net to net


Net to net

Net to net


Net to net

Net to net

Net to net




1.1 kg/1kg content in the export product

1.05 kg/1kg content in the export product

1.05 kg/1kg content in the export product

105 kg/100 kg content in the export product

102 kg/100 kg content in the export product

102 kg/100 kg content in the export product

102 kg/100 kg content in the export product

105 kg/100 kg content of the relevant material in the export product




CIF

value

restricted

to

2%

of

FOB

value
Note:
1. Specification/capacity & weight of capital goods alongwith number is to be indicated in the application.

2. Net weight of component & sub assemblies to be imported to be procured indigenously to be given in application.

3. Net weight of components & items to be manufactured from each raw materialto be imported is to be given in the application.

4. Weight of component & item to be manufactured fromeach indigenous material in export product is to be given in the application.

5. Weight of components and the item given as per note 2 to 4 should tally with net weight of Capital Goodsto be export.

6. Total weight of each raw material is to be calculated on the basis of net weight given as per note 3 above plus wastage as permitted in the norms for the particular raw material.
C1648 ¾ Tube Fryer 1 No. 1. S. S. Steel/Coil



2. S. S. Bar		 1.01 kg/kg content in the export product

1.05 kg/kg content in the export product
C1649 U. V. Sterlizer 1 No. 1. S. S. Sheet/Coil 1.01 kg/kg content in the export product
C1650 Automobile Ignition Locks 1 No. 1. Zinc Ingots



2. Brass Sheet



3. Copper Sheet



4. CRCA Sheets/coils



5. Stainless Steel Sheet/ Coil 304 Grade		 1.10 kg/kg content in the export product

1.15 kg/kg content in the export product

1.15 kg/kg content in the export product

1.20 kg/kg content in the export product

1.20 kg/kg content in the export product
C1651 Hair Styler Model No. 4522 1 No. (0.502 kg) 1. Polycarbonate (MARKROLON 2805 BLACK)

2. Polyamide Glass Filled 15% (Ultramide)

3. Polyamide (Polyloy)

4. HDPE( Durethane)

5. Polyamide Glass Filled 35% (Ultramide)

6. Polycarbonate (Markolon 2805 Black)

7. Polymethylene Oxide (Delrin)

8. Polyvinyl Chloride (Delrin)

9. Polyamide Nylon (PA 6 GF 15)

10. Univ. Master Batch

11. Polycarbonate (APEC HT)

12. Heating Element Wire 1-0-31 mm

13. Heating Element Wire 2-0.26 Kgs

COMPONENTS

1. Copper strip DIN 1791-1.75 X 0.35 mm – 0421129

2. Bristel bunch for 35mm brush 4429098

3. Spring Feeder (RSK) – 4448039

4. Screw PAN 2.2 X 9.5C – 0028138

5. Ferrite dumping bead – 0818161

6. Stranded wire red – 7 strands 0700926

7. Stranded wire blue – 7 strand 0702090

8. Wire and terminal –0716319

9. Insulating tube (RSK) – 0811240

10. Fixed contact 1 – 4475004

11. Fixed contact 2 – 4475005

12. Rotary contact 1 – 4475009

13. Rotary contact 2 – 4475010

14. Power Cord – 2 core/ 2Pin – 4830803

15. Metal Cap – 4523011

16. DC miniature motor – 1000 W – 4457080

17. Fan (RSK) – 4523003

18. Pin (RSK) – 0710947

19. Aluminium/Electrolytic Capacitor – 0622053

20. Paper/Polyester capacitor – 0623998

21. Diode BY 398 (RSK) – 0630574

22. Switch (RSK) – 4522062

23. Diode in 4004 – 630632

24. Insulating tube for PCB – 0811204

25. MICA nite – 4523006

26. Terminal 01 – 4523024

27. Terminal taping – 4522043

28. Terminal 02 – 4523062

29. Thermostat (RSK) – 0716439

30. Switch connecting rod – 4523007

31. Speed nut – 066107

32. Lever Rod or connecting rod – 4522005

33. Heat Cap – 4523010

34. Sticker – 0855126

35. SS Ring – 4485124

36. Tube Big barrel – 4485120

37. Plastic Bristle – 4522126

38. Screw – 1.45 X 3.5 – 4485119

39. CSK screw 2.4 X 5- 0032109

40. Brush cap (Plastic) – 4522123		 0.097 Kg


0.066 Kg


0.16 Kg

0.027 Kg

0.012 Kg


0.008 Kg


0.006 Kg


0.009 Kg


0.009 Kg


0.001 kg

0.021 kg


0.005 Kg


0.004 Kg




0.0015 kg


0.0070 Kg


2 No.


1 No.


1 No.


0.1400 Mtr.


0.1400 Mtr.


2 No.


0.0900 Mtr.


1NO.


1NO.


1NO.


1NO.


1NO.


1NO.

1NO.


1NO.

2NO.

1NO.


1NO.


1NO.


1NO.


4NO.


0.0300 mtr.


6 Nos.

2Nos.

2No.


2No.

1No.


1No.


1No.

1No.


1No.

1No.

1No.

1No.


10 Nos.


2No.


2No.


1No.
C1652 Liquidiser Jar Complete forMixer-Grinder Model No. 4250 1 No. (0.764 Kg) 1. PolyoxyMethylene (POM Hosta Form C 9021

2. Polypropylene Natural (PP Hosta Len PPN1060)

3. Acrylonitrilebutadiene Styrene Clear (Luran Clear Grey 388 S)

4. LDPE (Evaelvas)

5. Poly Butylene Terephthalate (Pocan B 7425 PBTP)

6. Poly Oxy Methylene Master Batch

COMPONENTS

1. Sintered bearing bush for liquidizer jar – 4250073

2. SS bracket – 4250272

3. Round head revet for liquidizer jar – 140112

4. Cutter upper – 4249065

5. Cutter lower – 4249066

6. Cutter Shaft – 4250075

7. Metal Bush coupling – 4250274

8. Rubber bush coupling – 4250079

9. Fibre washer 7.2 X 13.0.4 – 4250082

10. Copper Spring – 4203135

11. Bronze washer 7.2 X 11.5 X 0.2 – 4213041

12. Washer 6 X 8.5 X 0.6 – 4249177		 0.012 KG


0.010 KG


0.556 KG



0.018 KG

0.005 KG



0.002 KG




1No.


1No.

4No.


1No.

1No.

1No.

2No.


2No.


2No.


1No.


1No.


1No.
 
C1653 Mixer Grinder with Food Chopper & Liquidiser Jar Model No. 4249 1 No. (2.82 Kg) 1. PolyoxyMethylene (POM Hosta Form C 9021

2. Polypropylene Natural (PP Hosta Len PPN1060)

3. Acrylonitrilebutadiene Styrene Clear (Luran Clear Grey 388 S)

4. LDPE (Evaelvad)

5. Poly Butylene Terephthalate (Pocan B 7425 PBTP)

6. Poly Oxy Methylene Master Batch

7. Acrylonitrilebutediene Styrene White (ASA Luran S 778 T)

8. Polyporopylene Black (PP Hostalen Black PPN 1060)

COMPONENTS


1. Universal Motor-750 W-4249525

2. Speed Switch- 4259011

3. Diode BY 252 ZK-630478

4. Resistor 150K-0612910

5. Light Emiting Diode – 4249830

6. Stranded Wire Red VDE 08 12-16 strands-700926

7. Stranded Wire Black VDE 0812-16 strands-702103

8. Stranded Wire Blue CDE 0812-16 strands-702090

9. Flat Plug – 710969

10. Thermostat – 4291053

11. Cu Wrapper ZK-4291025

12. Resistor PTC ZK-4291810

13. Shrink Tube Cut-4291024

14. Insulation Leatheroid-4243182

15. Polyester Foil- 16mm width-805162

16. Capacitor X Foil EN 132400 – 622202

17. S.S. Clamp – 4249035

18. Pan Screw 4.2 X 16 ZK – 028140

19. Metal Washer B 4.3 ZK – 0108111

20. Slider Plate – 4250030

21. PIN(CAM)- 4250031

22. Screw Counter Sunk 2.9 X 13-028209

23. Pan Screw 3.5 X 16 ZK- 028149

24. Rubber Legs – 4243054

25. Power Cord – 2 Core/2 Pin – 3210465

26. Terminal with screws – 717253

27. Pan screw 2.9 X 13 – 028065

28. Cord Clamp – 4905343

29. Grooved Pin-Din 1472-0125201

30. Quick lock washer-109705

31. Spring ZK – 4250029

32. Cutter Pair- 4249833

33. Round Head Rivet for Chopper – 140109

34. Sealing washer – 4250023

35. Paper Laminated Stricker – 4249096

36. Ball Holder – 4249107

37. Ball ZK – 4249099

38. S.S.Tube Sleeve – 4249105

39. Sintered Bearing Bush for liquidizer – 4250073

40. SS Bracket – 4250272

41. Round Head Rivet for liquidizer – 140112

42. Cutter upper – 4249065

43. Cutter Lower- 4249066

44. Cutter shaft- 4250075

45. Metal bush coupling – 4250274

46. Rubber bush coupling – 4250079

47. Fibre washer 7.2 X 13 X 0.4 – 4250082

48. Copper spring – 4203135

49. Bronze washer 7.2 X 11.5 X 0.2 – 4213041

50. Washer 6 X 8.5 X 0.6 – 4249177
 		 0.112 KG


0.112 KG


0.662 KG



0.018 KG

0.005 KG



0.01 KG


0.374 KG



0.121 KG






1No.


1No.

1No.


1No.

1No.


0.274 Mtrs.


0.635 Mtrs.



0.336 Mtrs.


6No.

1No.

1No.


1No.


1No.


1No.


0.04Mtrs.


1No.


1No.

4No.


4No.


1No.

1No.

2No.


3No.


3No.


1No.


1No.


2No.


1No.

3No.


3No.


3No.

1No.

4No.


1No.


1No.


1No.

1No.

1No.


1No.


1No.

4No.


1No.


1No.


1No.

1No.


1No.


2No.


1No.


1No.


1No.
 

C1654 Hair Curler Model No. 4522 1 No. (0.506 kg) 1. Polycarbonate (MARKROLON 2805 BLACK) 0.097 Kg
2. Polyamide Glass Filled 15% (Ultramide) 0.0120 Kg
3. Polyamide (Polyloy) 0.016 Kg
4. HDPE( Durethane) 0.024 Kg
5. Polyamide Glass Filled 35% (Ultramide) 0.014 Kg
6. Polycarbonate (Markolon 2405 Black) 0.004 Kg
7. Polymethylene Oxide (Delrin) 0.005 Kg
8. Polyvinyl Chloride (Decelith) 0.010 Kg
9. Polycarbonate Clear (Markrolon 2805) 0.002 kg
10. Polyamide Nylon (PA 6 GF 15) 0.014 Kg
11. Heating Element Wire 1-0-31 mm 0.005 Kg
12. Heating Element Wire 2-0.26 Kgs 0.004 Kg
COMPONENTS
1. Copper strip DIN 0.0030 kg
2. Bristel bunch for 35mm brush 4429098 0.0070 kg
3. Bristle bunch for 48mm brush – 0880251 0.0100kg
4. Spring Feeder (RSK) – 4448039 2 No.
5. Screw PAN 2.2 X 9.5C – 0028138 1 No.
6. Ferrite dumping bead – 0818161 1 No.
7. Stranded wire red – 7 strands 0700926 0.1400 Mtr.
8. Stranded wire blue – 7 strand 0702090 0.1400 Mtr.
9. Wire and terminal –0716319 2 No.
10. Insulating tube (RSK) – 0811240 0.0900 Mtr.
11. Fixed contact 1 – 4475004 1No.
12. Fixed contact 2 – 4475005 1No.
13. Rotary contact 1 – 4475009 1No.
14. Rotary contact 2 – 4475010 1No.
15. Power Cord – 2 core/ 2Pin – 4830803 1No.
16. Metal Cap – 4523011 1No.
17. DC miniature motor – 1000 W – 4457080 1No.
18. Fan (RSK) – 4523003 1No.
19. Pin (RSK) – 0710945 1No.
20. Aluminium/Electrolytic Capacitor – 0622053 2No.
21. Paper/Polyester capacitor – 0623998 1No.
22. Diode BY 398 (RSK) – 0630574 1No.
23. Switch (RSK) – 4522062 1No.
24. Diode in 4004 – 630632 4No.
25. Insulating tube for PCB – 0811204 0.0300 Mtr.
26. MICA nite – 4523006 6 Nos.
27. Terminal 01 – 4523024 2 Nos.
28. Terminal taping – 4522043 2 Nos.
29. Terminal 02 – 4523062 2 No.
30. Thermostat (RSK) – 0716439 1 No.
31. Switch connecting rod – 4523007 1 No.
32. Speed nut – 066107 1 No.
33. Lever Rod or connecting rod – 4522005 1 No.
34. Heat Cap – 4523010 1 No.
35. Sticker – 0855126 1 No.
C1655 Hair Dryer Model No. 4548 1 No. (0.510 Kgs) 1. Acrylonitrilebutadiene styrene White (ASA Luran S 778 T) 0.041 KG
2. Polycarbonate Black (Makrolon 2805 Black) 0.023KG
3. Polyamide Glass Filled 35% (Ultramid B 35) 0.021KG
4. Polyamide (Zytel FR 720) 0.013 KG
5. Polycarbonate White (Makrolon 2805 white) 0.122 KG
6. Polyamide (Polyloy A 709) 0.032 KG
7. Heating Element Wire 1-0.320 mm 0.004KG
8. Heating Element Wire 2-0.258 0.004 KG
COMPONENTS
1. Brush with plastic bristle – 4471855 1No.
2. Brush with nylon bristle – 4471854 1No.
3. Brush round with handle – 4479853 1No.
4. Sticker double side – 4471031 1No.
5. Screw M 2.6 X 6 – 0034116 2No.
6. Ceramic capacitor (Single layer) – 0622128 1No.
7. Round Sticker Black – 4447043 1No.
8. DC miniature motor – 1000 W – 4457080 1No.
9. Fan moulded – 4547067 1No.
10. Thermostat – 0716319 1No.
11. Terminal 01 – 4447046 2No.
12. Terminal 03 – 4447047 2No.
13. Micanite - 1 Width 15.50 mm – 4471009 4No.
14. Micanite – 2 width 12.08 mm – 4471010 2No.
15. Mica separator – 4471046 2No.
16. Terminal 02 – 4471029 1No.
17. PCB Unpopulated – 4447003 4No.
18. Diode IN 4004 – 0630632 1No.
19. Diode BY 298 – 0630441 1No.
20. Switch PSK – 4548001 2No.
21. Rivet B2*0 – 0144141 1No.
22. Connecting terminal – 4473023 1No.
23. Cable Sleeve – 4532055 1No.
24. Switch slider – 4516002 1No.
25. Cable tie – 0716270 1No.
26. Power cord – 2 core/ 2 Pin – 4830801 1No.
27. Cord clamp – 4905343 1No.
28. Trilock screw – 0031129 1No.
29. Screw 2.3 X 5.5 – 5550016 1No.
30. Screw 5.3 X 13.0 – 0031003 2No.
31. Rubber pad round – 4471019 2No.
32. Rubber pad oval – 4547078 2No.
C1656 Mixer-Grinder With Food Chopper Model No. 3249 1 No. (2.14 Kgs) 1. Acrylonitrilebutadienes Styrene white (ASA Luran S 778 T) 0.374 KG
2. Polyoxymethylene (POM Hosta Form C 9021) 0.100 KG
3. Polypropylene Natural (PP Hosta Len PPN 1060) 0.103 KG
4. Polypropylene Black (PP Hostalen Black PPN 1060) 0.121 KG
5. Acrylonitrilebutediens Styrene Clear (Luran Clear Grey 388 S) 0.066 KG
6. Polyoxymethylene Master Batch 0.001 kg
COMPONENTS
1. Universal Motor-750 W-4249525 1No.
2. Speed Switch- 4259011 1No.
3. Diode BY 252 ZK-630478 1No.
4. Resistor 150K-0612910 1No.
5. Light Emiting Diode – 4249830 1No.
6. Stranded Wire Red VDE 08 12-16 strands-700926 0.274 Mtrs.
7. Stranded Wire Black VDE 0812-16 strands-702103 0.635 Mtrs.
8. Stranded Wire Blue CDE 0812-16 strands-702090 0.336 Mtrs.
9. Flat Plug – 710969 6No.
10. Thermostat – 4291053 1No.
11. Cu Wrapper ZK-4291025 1No.
12. Resistor PTC ZK-4291810 1No.
13. Shrink Tube Cut-4291024 1No.
14. Insulation Leatheroid-4243182 1No.
15. Polyester Foil- 16mm width-805162 0.04 Mtrs.
16. Capacitor X Foil EN 132400 – 622202 1No.
17. S.S. Clamp – 4249035 1No.
18. Pan Screw 4.2 X 16 ZK – 028140 4No.
19. Metal Washer B 4.3 ZK – 0108111 4No.
20. Slider Plate – 4250030 1No.
21. PIN(CAM)- 4250031 1No.
22. Screw Counter Sunk 2.9 X 13-028209 2No.
23. Pan Screw 3.5 X 16 ZK- 028149 3No.
24. Rubber Legs – 4243054 3No.
25. Power Cord – 2 Core/2 Pin – 3210465 1No.
26. Terminal with screws – 717253 1No.
27. Pan screw 2.9 X 13 – 028065 2No.
28. Cord Clamp – 4905343 1No.
29. Grooved Pin-Din 1472-0125201 3No.
30. Quick lock washer-109705 3No.
31. Spring ZK – 4250029 3No.
32. Cutter Pair- 4249833 1No.
33. Round Head Rivet for Chopper – 140109 4No.
34. Sealing washer – 4250023 1No.
35. Paper Laminated Stricker – 4249096 1No.
36. Ball Holder – 4249107 1No.
37. Ball ZK – 4249099 1No.
38. S.S.Tube Sleeve – 4249105 1No.




Annexure “E” to the
Public Notice No.04
Dated: 31/03/2001
 

FOOD PRODUCTS


Sl.No. Export Item Qty. Import Item Qty Allowed
E95 Oleoresin Paprika (refined) 1 kg 1. Oleoresin Paprika (Crude) 1.02 kg/kg
E96 Black Pepper Oil without turpene (EOA Quality) 1 kg 1. Black Pepper Oil with 3% Turpene 1.03 kg
E97 Gum Base for Bubble Gum (Jolly 6BB) containing Blend of Synthetic Elastomers 20.5%+1% and Polyvinyl Acetate (Food Grade) 28%+1% 1 kg 1. Blend of Elastomers (blend Jolly 2/Gummy)

2. Polyvinyl Acetate
    (Vinnapas B5 Special,
    Vinnapas B30 Special,
    Vinnapas B17 Special)
3. Acetylated Monoglycerides (Myvacet 9-08 K/Myvacet 5-07)

4. Microcrystalline Wax (Be Square 195 Amber/Victory Amber E)

5. Emulsifier (Lecethin based) (Emulpur)

6. Resin (Stabelite Ester 5- E resin)		 0.2093 kg





0.2980 kg



0.0321 kg


0.0465 kg


0.0132 kg


0.0993 kg
E98 Gum Base for Liquid Filled Gum (Vivisoft) containing Blend of Synthetic Elastomers 20%+1% and Polyvinyl Acetate (Food Grade) 12%+1% 1 kg 1. Blend of Elastomers (blend Jolly 2/Gummy)

2. Polyvinyl Acetate (Vinnapas B5 Special, Vinnapas B30 Special, Vinnapas B17 Special)

3. Polyisobutylene (Oppanol B 15 SF)

4. Acetylated Monoglycerydes (Myvacet 9-08 K/Myvacet 5-07)

5. Microcrystalline Wax (Be Square 195 Amber/Victory Amber E)

6. Resin (Stabelite Ester 5- E resin)
 		 0.2182 kg



0.1254 kg


0.0756 kg


0.0375 kg


0.0397 kg


0.1972 kg
E99 Instant Fruit Flavour Crystal containing 92% Sugar 1 kg 1. Sugar

2. Cap (made of Polypropylene Granules)


3. White Plastic Tin Lid (Made of LDPE Granules


4. Tin Plate		 0.938 kg

As per packing policy

As per packing policy

As per packing policy
E100 Modified Starch 1 MT 1. Maize 1.71 MT
E101 Corn Gluten 1 MT 1. Maize 22.00 MT
E102 Sorbitol 1 MT 1. Maize 1.4 MT


Annexure “F” to the
Public Notice No.04
Dated: 31/03/2001
 

LEATHER PRODUCTS


Sl.No. Export Item Qty. Import Item Qty Allowed
G48 Leather Carpet 1000 Sq. Feet 1. Chemicals


2. Cotton Durry

3. Packing material		 As per SION G-7 with the condition that the import items at Sl No. 40 & 41 shall be disallowed

1.05 kg per kg content in the export product


As per packing policy


Annexure “G” to the
Public Notice No.04
Dated: 31/03/2001
 

SPORTS GOODS


Sl.No. Export Item Qty. Import Item Qty Allowed
I30 Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-5 having Rubber compound minimum 179 gms. 1 No. 1. Synthetic Rubber Nitrile/SBR

2. Cotton Fabric for per relevant layer

3. Polyester Viscose Fabric/ Polyester Fabric for per relevant Layer

4. Butyl Bladder/ Latex Bladder

5. Adhesive Rubber based/ Adhesive PU Rubber Based for per relevant layer

6. Ink		 55 gms.


0.23 Sq.Mtr

0.23 Sq. Mtr



1.02 Nos.


23 gms.



10 gms.
I31 Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-4 having Rubber compound minimum 148 gms. 1 No. 1. Synthetic Rubber Nitrile/SBR

2. Cotton Fabric for per relevant layer

3. Polyester Viscose Fabric/ Polyester Fabric for per relevant Layer

4. Butyl Bladder/ Latex Bladder

5. Adhesive Rubber based/ Adhesive PU Rubber Based for per relevant layer

6. Ink		 45 gms.


0.20 Sq.Mtr


0.20 Sq. Mtr


1.02 Nos.


20 gms.



8 gms.
I32 Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-3 having Rubber compound minimum 117 gms. 1 No. 1. Synthetic Rubber Nitrile/SBR

2. Cotton Fabric for per relevant layer

3. Polyester Viscose Fabric/ Polyester Fabric for per relevant Layer

4. Butyl Bladder/ Latex Bladder

5. Adhesive Rubber based/ Adhesive PU Rubber Based for per relevant layer

6. Ink		 30 gms.


0.18 Sq.Mtr

0.18 Sq. Mtr



1.02 Nos.


18 gms.



6 gms.
I33 Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-2 having Rubber compound minimum 89 gms. 1 No. 1. Synthetic Rubber Nitrile/SBR

2. Cotton Fabric for per relevant layer

3. Polyester Viscose Fabric/ Polyester Fabric for per relevant Layer

4. Butyl Bladder/ Latex Bladder

5. Adhesive Rubber based/ Adhesive PU Rubber Based for per relevant layer

6. Ink		 20 gms.


0.15 Sq.Mtr

0.15 Sq. Mtr



1.02 Nos.


15 gms.



4 gms.
I34 Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-1 having Rubber compound minimum 69 gms. 1 No. 1. Synthetic Rubber Nitrile/SBR

2. Cotton Fabric for per relevant layer

3. Polyester Viscose Fabric/ Polyester Fabric for per relevant Layer

4. Butyl Bladder/ Latex Bladder

5. Adhesive Rubber based/ Adhesive PU Rubber Based for per relevant layer

6. Ink		 15 gms.


0.13 Sq.Mtr


0.13 Sq. Mtr


1.02 Nos.


13 gms.



3 gms.


Annexure “H” to the
Public Notice No.04
Dated: 31/03/2001
 

TEXTILE PRODUCTS

Sl.No. Export Item Qty. Import Item Qty Allowed
J334 Ladies Nightwear Set 1 Set 1. Fabric to be used 2.80 sq.mtr.
J335 Boy’s Long Sleeve Quilted Shirt 1 pc 1. Fabric to be used (outer fabric)

2. Relevant inner fabric

3. Polyester staple fibre		 2 sq.mtr.


2 sq.mtr.

120 gms
J336 Ladies V-neck sleeveless beachwear blouse 1 No. 1. Fabric to be used 1.90 sq.mtr.
J337 100% Polyester Carbonised Printed Fabric 1 sq. mtr. 1. 65% Polyester/ 35% Cotton Blended Fabric (Dyed/Printed) 1.01 sq.mtr.
J338 Children Vest 1 pc. 1. Fabric to be used 0.80 sq.mtr.
J339 Ladies Singlet 1 pc. 1. Fabric to be used 0.60 sq.mtr.
J340 Ladies Tube Top 1 pc. 1. Fabric to be used 0.50 sq.mtr.
J341 Poly/Cotton knitted gloves – seamless with/without PVC dots (one side) 1 pair 1. Poly/cotton yarn


2. PVC compound (Palstisol)


3. Elastic covered yarn		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.02 kg/kg content in the export product

Note: The item at Sl. No. 2 shall be allowed only when the export product is PVC dotted.
 
J342 Lycra Covered with relevant yarn 1 kg 1. Polyester Staple Fibre (1 to 3 DN)

2. Viscose Staple Fibre (1 to 3 DN)

3. Lycra/Spandex Yarn


4. Disperse Dyes 100% Strength		 1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.03 kg/kg content in the export product

2% of the wt. of the polyester in the export product

Note: If the export product is dyed, then only the import item at Sl. No. 4 shall be allowed.
 
J343 Rugs for Horses 1 kg 1. Fabric to be used in the export product 1.05 kg/kg content in the export product
J344 Girls Skirt 1 No. 1. Fabric to be used in the garment 1.10 sq.mtr. per piece
J345 Ladies Tank Top 1 pc. 1. Relevant Knitted fabrics

2. Relevant Glass Beads/ Glass Pipe Beads/ Sequins		 1.10 kg/kg content in the export product

Net +1% wastage


Annexure “I” to the
Public Notice No.04
Dated: 31/03/2001
 

MISCELLANEOUS PRODUCTS

Sl.No. Export Item Qty. Import Item Qty Allowed
K129 Both side melamine face boards 100 sq. mtr. 1. Relevant Plain particle/ MDF Board


2. Base paper (70-120 GSM)


3. Barrier paper (70-100 GSM)


4. Melamine


5. Para Formaldehyde


6. Wetting Agent


7. Releasing Agent
 		 110 sq.mtr.

210 sq.mtr.

210 sq.mtr.

27 kg


22.700 kg


4.00 kg


1.00 kg
 

Note: Wastage is allowed only in respect of item Nos. 1 @ 10%, and 2 & 3 @5%.
 
K130 Zip Fastener Slider Auto Lock/ Pin Lock/ Non Lock Types 1 No. 1. Zinc (Special High Grade containing by weight 99.9% or more of Zinc)


2. Spring for No. 3 & 5 Auto Lock Sliders
 		 Net+8% wastage


Net+5% wastage
 
K131 Zip Fastener Sliders L-3103 HRO LFC Sliders 1 No. 1. Zinc (Special High Grade containing by weight 99.9% or more of Zinc)
 		 Net+8% wastage
K132 Zip Fastener Auto Lock Types 1 No. 1. Zinc (Special High Grade containing by weight 99.9% or more of Zinc)

2. Spring for Auto Lock Aliders N 31
 		 Net+8% wastage

Net+5% wastage
 
K133 Dimensional Granite Blocks Dressed 1 Cubic Metre 1. Diamond Cutting Wire


2. Drill Rods
 		 0.80 Metre

1.00 No.
 

Note: The import items shall be allowed up to 2.5% of FOB value.
 
K134 Glass Mosaics 1 MT 1. Glass Scrap

2. Formers (Feldspar, fluorspar, limestone)

3. Resins (Polyvinyl Alcohol)

4. Modifiers (Borax, Sodium Nitrate, Cryolite, Sodium Selenide)

5. Aklali (Soda Ash (Sodium Carbonate), Potassium Carbonate)

6. Binders (Vinyl Chloride Vinyl Acetate)

7. Silica (Silica Sand, Fumed Silica)

8. Oxides (Zinc Oxide, Arsenic trioxide)

9. Pigments/Colouring Agents (Cupric Oxide Cupcrous Oxide, Cobalt oxide, Nickel Oxide, Maganese Dioxide, Oxides of Iron, Chromium, titanium Dioxide)
 		 210 kg

165 kg

10 kg

52.50 kg


162 kg


89 kg

116.50 kg

50 kg


50 kg
 

Presented by eximkey.com

 
Trade Intelligence
Search for latest information on item wise exports and imports, from all major Indian ports.

Username
Password
Register now Free ? Forgot Password ?
© Copyright 2022. Asis Industries Ltd . All Rights Reserved