Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

PUBLIC NOTICE NO. 35 (RE-2001)/1997-2002, Dt. 03/09/2001.

Amendments/modifications and additions in the Standard Input Output Norms.

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2739, the new entries at Sl.No.A-2740 to A-2760 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1685, the new entries at Sl.No.C-1686 to C-1694 shall be added as per Annexure ”C” to this Public Notice.

5. This issues in public interest.

(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE

( B.GANGAR)
DY. DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the
Public Notice No. 35
Dated: 03/09/2001

AMENDMENTS/CORRECTIONS

Sl.No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	32	Chemicals & Allied Products Sl.No.A160	After the description of import item at Sl. No. 13, the following additional import item (with quantity) shall be added:- “14. Chlorine - 0.560 kg”.
2.	32	Chemicals & Allied Products Sl.No.A162	After the description of import item at Sl. No. 10, the following additional import item (with quantity) shall be added:- “11. Chlorine - 0.560 kg”.
3.	3	Chemicals & Allied Products Sl.No.A163 (amended vide Public Notice No. 19 Dated: 03/07/2000)	After the description of import item at Sl. No. 15, the following additional import item (with quantity) shall be added:-“16. Chlorine - 0.500 kg”.
4.	45	Chemicals & Allied Products Sl.No.A251	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A251	Guaifenesin	1 kg	1. Guaiacol	0.75 kg
			2. Epichlorohydrin	0.64 kg
			OR
			2. Alpha Glyceryl Monochlorohydrin	0.62 kg

Chemicals & Allied Products
Sl.No.A254

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A254	Guanidine Nitrate	1 kg	1. Urea	1.30 kg
			OR
			1. Dicyanadiamide	0.600 kg
			2. Ammonium Nitrate	0.700 kg

6.	186	Chemicals & Allied Products Sl.No.A1539	The description of import item at Sl. 3 shall be amended (without any change in quantity) to read as under:- “3. Meta Para Cresol”
7.	200	Chemicals & Allied Products Sl.No.A1674	The description of import item at Sl. 1 shall be amended (without any change in quantity) to read as under:- “1. Rubber Accelerator – Alkyl Phenol Disulphide/ Dipenta Methelene Thivram Tetra Sulfide”
8.	254	Chemicals & Allied Products Sl.No.A1882	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1882	Metalaxyl Technical 94% Minimum	1 kg	1. N-(1-Methoxy Carbonyl Ethyl) 2,6 Dimethyl Aniline (MEDA)	0.852 kg
			OR
			1. a)2,6 Dimethyl Aniline	0.640 kg
			1. b)Methyl 2 Chloro Propionate	0.730 kg
			1. c)Sodium Iodide	0.060 kg
			1. d)Tetra Butyl Ammonium Bromide	0.0165 kg
			1. e)Sodium Bicarbonate	0.575 kg
			2. Methoxy Acetyl Chloride	0.480 kg
			OR
			2.a)Methoxy Acetic Acid	0.420 kg
			2. b)Thionyl Chloride	0.600 kg
			3. Dimethyl Formamide	0.378 kg
			4. Toluene	0.5 kg
			5. Hexame	0.407 kg
			6. Caustic Soda	0.415 kg

9.	256-257	Chemicals & Allied Products Sl.No.A 1913	The norm covered by this entry shall be deleted.
10.	266	Chemicals & Allied Products Sl.No.A1989	The norm covered by this entry shall be deleted.
11.	23	Chemicals & Allied Products Sl.No.A 2423 (Amended vide Public Notice No. 09 Dated: 01/05/2000)	The norm covered by this entry shall be deleted.
12.	8	Chemicals & Allied Products Sl.No.A2446 (Amended vide Public Notice No. 25 Dated: 01/08/2000)	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2446	Polytetrafluoro Ethylene Dispension (Emulsion Grade, TFE content 59.5+/-0.5%)	1 MT	1. Chloroform	4.75 MT
			2. Perfluoro-Octanic Acid (FC-Z6)	0.0075 MT
			3. Anhydrous Hydro Fluoric Acid	1.42 MT

13.	17	Chemicals & Allied Products Sl.No.A2466 (Amended vide Public Notice No. 32 Dated: 01/09/2000)	The description of import item shall be corrected (without any change in quantity) to read as under:- “5 Amino 3 Methyl 1 Phenyl Pyrazol”
14.	20	Chemicals & Allied Products Sl.No.A2501 (As amended vide Public Notice No. 42 Dated: 1.12.2000)	The description of export item shall be corrected to read as under:- “Lithium Bromide Solution 53%”
15.	32	Chemicals & Allied Products Sl.No.A2557 (Amended vide Public Notice No. 04 Dated: 31/03/2001)	The description of export item shall be corrected to read as under:- “Dimethyl Lauryl Benzyl Ammonium Chloride 80%”
16.	5-6	Engineering Product Sl.No.C508 (Amended vide Public Notice No. 36 Dated: 03.10.2000)	1. The description of import item at Sl. No. 1(ii) shall be amended (with quantity) to read as under:-
			“1(ii)Energy Sources/Fuels(Natural Gas/LNG, NGL(condensate/ gaseous), Naphtha, Light Diesel Oil, Furnace Oil) (Only for plants having captive power plant with facilities installed for use of specific energy sources/fuels).”	-	2626330 K Cal.
			2. The description of import item at Sl. No. 1(iii) shall be amended (with quantity) to read as under:-
			“1(iii)Energy Sources/Fuels (Natural Gas/LNG, NGL (condensate/gaseous), Naphtha, High Speed Diesel Oil, Furnace Oil) (for re-heating furnaces in rolling mills, ladle heating & fundish pre-heating).”	-	565670 K. Cal.
			3. After note No. 3 under the entry, the following notes Nos. 4, 5 & 6 shall be added:- “Note:- 4. Import of either one or a combination of the energy sources/fuels mentioned against S.Nos. 1(ii) & 1(iii) shall be permitted within the overall calorific value, subject to further actual user condition. Note:- 5. Quantity of specific fuel(s) in Kgs/Cubic meter/K.Ltr shall be obtained by dividing the K. Cal figure by the net calorific value/heat value of the fuel(s) as detailed below:-
			Net Calorific values of Fuels
			1. Natural Gas	-	8,400 K.Cal/Cubic Meter
			2. LNG	-	11,436 K. Cal/Kg
			3. Naptha	-	10,610 K. Cal/Kg
			4. NGL	-	10,610 K. Cal/Kg
			5. LDO	-	10,060 K. Cal/Kg
			6. F.O.	-	9790 K. Cal/Kg
			7. HSD	-	10,230 K. Cal./kg
			Note:- 6. These norms are not applicable to DFRC Scheme as per General Note No.7 in Standard Input Output Norms Book.”

17.

575

Engineering Products
Sl.No.C608

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C608	Component of Electric Teeth Plaque removing Brush: Rack Pin/Pin (Big/Small)	1 kg	1. S.S. Rod/Coil of relevant grade	2 kg

18.	587	Engineering Products Sl.No.C690	The description of export item shall be amended to read as under:- “Cryogenic Tanks for Liquidified Gases.”
19.	3	Engineering Products Sl. No. C- 829 (Amended vide Public Notice No. 12 Dated: 1.6.2000)	The foot note below this entry shall be deleted.
20.	66	Engineering Products Sl.No.C1638 (amended vide Public Notice No. 04 Dated: 31.03.2001)	The description of import item at Sl. No.1 shall be amended (with quantity) to read as under:-
			“1. Aluminium Ingot	-	1.15 Kg.
			OR
			1. Rolled Aluminium Sheets in Coil Form	-	1.05 Kg”
21.	66	Engineering Products Sl.No.C-1640 (Amended vide Public Notice No. 04 Dated: 31.03.2001)	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1640	Fibreglass Filter Bags of different sizes with Snap Ring made of stainless steel AISI 301 and other fittings	1 No.	1. Fibreglass Filter Cloth of relevant GSM	1.02 Sq.yard /Sq. yard of cloth in export product
			2. Fibreglass Sewing Thread	0.023 kg
			3. Stainless Steel Strip AISI 301	0.025 kg

22.

873

Plastic Products
Sl.No.H-85

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-85	Expandable Polystyrene Resin – General Purpose Grade	1 MT	1. Styrene Monomer	956 kgs
			2. Pentane (Iso + Normal)	83.438 kgs
			3. a) Softnal 3118 (Mono Acid Diglyceride)	1.4 kg
			3. b) Softnal 3995 (Glyceryl Mono Sterate)	1.52 kg
			3.c) Tricalcium Phosphate	3.598 kgs
			3. d) Adwax 165 (Bisamide Waxes)	2.0 kgs
			3. e) Adwax 280 (N-N Ethylene Bis Steramide)	1.0 kg
			OR
			4. a) Protective Colloid	0.013 kg
			4. b) Benzoyl Peroxide	0.00152 kg
			4. c) Tertiary Butyl Perbenzote	0.00247 kg
			4. d) Hexabromide	0.0002 kg
			4. e) Additive 451	0.0022 kg
			4. f) Polyethylene Wax	0.00096 kg
			4. g) Alfa Methyl Styrene Dimmer	0.00042 kg
			4. h) Antistatic Agent	0.0001 kg
			4. i) Etingal A	0.00016 kg
Note: The chemicals at Sl. 3 (a) to (e) or 4 (a) to (i) can be approved as per the applicant’s requirements.

23.

880

Plastic Products
Sl.No.H-119

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-119	High Impact Polystyrene Resin	1 kg	1. Styrene Monomer 99%	0.9715 kg
			2. Polybutadiene Rubber	0.0632 kg
			3. Plasticizer	0.0116 kg
			4. Mineral Oil (Liquid Paraffin)	0.0103 kg
			OR
			i) Styrene Monomer	0.9470 kg
			ii) Polybutadiene Rubber	0.8750 kg
			iii) Mineral (Liquid Paraffin)	0.0221 kg

24.

901

Plastic Products
Sl.No.H-230

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-230	Polypropylene Multifilament Yarn	100 kg	1. Polypropylene Chips/ Granules/ Resins	105.10 kgs
			2. Master Batch (Polypropylene Dyed Chips/ Relevant Colour Master Batches	4.15 kgs
			3. U. V. Stabilizer	0.75 kg
			4. Spin Finish Oil	2.33 kgs

Annexure “B” to the
Public Notice No.35
Dated: 03/09/2001
CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2740	Phenol Modified Rosin Ester/ Rosin Modified Phenolic Resin (Technical specification in Acid Values 25 max, softening point (R&B) 110° – 120°c	1 kg	1. Rosin	0.778 kg
			2. Fumaric Acid	0.024 kg
			3. Dodecyl Phenol	0.044 kg
			4. Paraformaldehyde	0.053 kg
			5. Pentaerythritol	0.099 kg
			6. Para Ocyl Phenol	0.052 kg
A2741	Gumboro D-78(1 ML)	1 ML Vial	1. SPF-Chicken Eggs	.19000 Nos
			2. Seed Virus	.00012 Nos
			3. Tryptose	.00079 Gms
			4. Gentamycin Sulphate	.00020 Gms
			5. Redox Stabilser	.00053 Ltrs.
			6. Glass Vials	1.0800 Nos
			7. Rubber Stoppers	1.0800 Nos
			8. Aluminium Caps	1.0800 Nos
A2742	Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40+2%)	1 kg	1. 2 Ethyl Hexyl Alcohol	0.225 kg
A2742	Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40+2%)	1 kg	2. Caustic Soda Lye (45%)	0.155 kg
A2743	Methylol Amino Resin containing 16% sulfonated MF Resin, 51% sulfonated UF Resins and 14% Naphthalene formaldehyde Condensed product (Tysntan T-6)	1 Tonne	1. Naphthalene	78.70 kgs
			2. Caustic Soda (solid)	40.00 kgs
			3. Formaldehyde (37%)	489.00 kgs
			4. Melamine	83.20 kgs
			5. Urea	234.00 kgs
			6. Sodium Bisulfite	228.00 kgs
A2744	Sodium Starch Glycolate USP-23	1 kg	1. Native Potato Starch (moisture contents: 15:20%)	1.342 kg
			2. Monochloro acetic acid	0.086 kg
			3. Methyl Ethyl ketone	1.00 kg
A2745	2-Amino 4, 2’4 Trichloro Diphenyl Ether (TADE) (Purity 99.5% Min.)	1 kg	1. 2,4 Dichloro Phenol	0.862 kg
A2745		1 kg	2. Potassium Hydroxide	0.367 kg
A2746	Para Phenylene Diamine 2,5 Disulphonic Acid	1 kg	1. Para Phenylene Diamine	0.500 kg
A2747	6 Nitro 2 Amino Phenol 4 Sulphonic Acid	1 kg	1. Ortho Amino Phenol	0.666 kg
A2748	N Acetyl N-Methyl Para Phenylene Diamine (para Amino-N-Methyl Acetanilide)	1 kg	1. N-Methyl Aniline	1.06 kg
A2749	Structured Phenolic Modified Rosin Ester	1 kg	1. Rosin	0.680 kg
			2. Maleic Anhydride	0.021 kg
			3. Para Tertiary Butylated Phenol	0.094 kg
			4. Paraformaldehyde	0.047 kg
			5. Bis Phenol-A	0.007 kg
			6. Pentaerythritol	0.114 kg
			7. Vista Oil	0.040 kg
			8. Dimer Fatty Acid	0.031 kg
A2750	Polybutylene Terephthalate Compound	1 kg	1. Polycarbonate	0.46 kg
			2. Polybutylene Terephthalate	0.39 kg
			3. Additives (Heat Stabilizers – Phosphite based, Sulfide based; Light Stabilizers – Benzotriazole based; Stabilizers – Phosphate based, Epoxy based; Anti Oxidants – Phenolic based; Processing Aids – Sterates; Flame Retardant – Sulphonate based, Bromine based; Anti Dripping Agent – PTFE based – SB203, MBS Rubber, SVS Rubber)	0.17 kg
			4. Pigments (Chromium Oxide, green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone – Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Oerylene – Red, Perylene – Red)	0.024 kg
Note: 1.The Poly Butylene Terephthalate is based on 37% +/- 1% and Polycarbonate is based on 44% +/- 1% content. In case of any variation, the quantity shall be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.
A2751	Polycarbonate Compound	1 kg	1. Tris (Di-butylpheneil) Phos	0.00053 kg
			2. UVA 1577 {2-(4,6 diphenyl-1,3,50 Triaz in-2yl) 5-(Hexy) oxyl-Phenol}	0.04725 kg
			3. Polycarbonate Powder	1.00219 kg
			4. Colorants (Relevant)	0.00003 kg
			OR
			1. Polycarbonate Resin	1.0430 kg
			2. Additives (Heat Stabilizers – Phosphite based,Light Stabilizers – Benzotriazole based; Stabilizers – Epoxy based, Phosphite based; Anti Oxidants – Phenolic based; Processing Aids – Silicone Oil, Sterates; Flame Retardant – Phosphate based, Sulphonate based, Bromine based; Anti Dripping Agent – PTFE based)	0.0047 kg
			3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiophene Brightner, Anthraquinone – Violet/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Antrapyridone Red Dye, Thio Indigo Dye Compound, Phtalprinone Red Dye, Imide Derivatives)	0.0018 kg
			OR
			1. TNPP (Tris(nonyl Phenol) Phosphite)	0.00105 kg
			2. Tinuvin 234 {2-(2H-Benz-Otriazol-2-yl) –4-6, Bis (1-Methyl-1-Phenylethyl) Phenol)	0.10500 kg
			3. Polycarbonate Powder	0.94374 kg
			4. Colorant (Relevant)	0.00021 kg
Note: 1.The Polycarbonate Compound is based on 99.5% +/- 0.5% Polycarbonate Resin content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2.Combination of various additives and Pigments is to be permitted within the quantities indicated against each.
A2752	Glass Reinforced Polybutylene Terephthalate Compound	1 kg	1. Polybutylene Terephthalate	0.597 kg
			2. Additives (Stabilizers – Sulfide based, Phosphite based, Epoxy based, Phosphate based; Light Stabilizers – Benzotriazole based; Anti Oxidants – Phenolic based; Processing Aids- Sterates; Flame Retardant – Sulphonate based/ Bromine based; Anti Dripping Agent – PTFE based – SB203)	0.21 kg
			3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone – Violet/ Green/ Yellow/Red, Solvent Red; Phtalocyanine – Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Perylene – Red, Methine Orange Dye, Anthrapyridone Red Dye, Thio Indigo Dye Compound, Phtaloprinone Red Dye, Imide Derivatives)	0.019 kg
			4. Glass Fibre	0.224 kg
Note: 1.The Poly Butylene Terephthalate is based on 57% +/- 1% and Additives are based on 20% +/- 1% content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.
A2753	Glass Reinforced Modified Poly Phenylene Oxide (PPO) Compound	1 kg	1. Poly Phenylene Oxide (PPO)	0.310 kg
			2. Additives (Heat Stabilizers – Sulfide based; Light Stabilizers – Benzotriazole based; Anti Oxidants – Phenolic based, Epoxy based Stabilizers; Processing Aids – Sterates; Flame Retardant – Phosphate/ Sulphonate based; MBS Rubber, SBS Rubber)	0.042 kg
			3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone – Violet/ Green/ Yellow/ Red, Solvent Red; Phtalocyanine – Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Perylene – Red, Methine Orange Dye, Anthrapyridone Red Dye, Thio Indigo Dye Compound, Phtaloprinone Red Dye, Imide Derivatives)	0.010 kg
			4. Glass Fibre	0.210 kg
			5. High Impact Polystyrene	0.480 kg
Note: 1. The export product input quantities have been worked out with Poly Phenylene Oxide 30% +/- 1%, High Impact Polystyrene 45% +/- 1% and Glass Fibre 20% +/- 1% content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.
A2754	Glass Reinforced Polycarbonate Compound	1 kg	1. Polycarbonate Resin	0.898 kg
			2. Additives (Stabilizers – Sulfide based, Phosphite based; Light Stabilizers – Benzotriazole based; Stabilisers – Epoxy based, Phosphate based; Processing Aids Silicone Oil, Sterates; Flame Retardant Phosphite based, Bromine based; Anti Dripping Agent PTFE based – SB203)	0.026 kg
			3. Pigments (Carbon Black, Titanium Dioxide)	0.009 kg
			4. Glass Fibre	0.117 kg
Note: 1. The Polycarbonate Compound is based on 85% +/- 1% Polycarbonate Resin content and 11% +/- 1% Glass Fibre content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.
A2755	Liquid Printing Ink – P.U. Based – in Black Colour – (For Food Grade Packaging) Pigment content – Minimum 10.5% Solid P.U. Resin content – Minimum 11.4%	1 MT	1. Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone	719.30 kgs
			2. Polyol	86.26 kgs
			3. Di-Isocyanate	18.80 kgs
			4. Ink Additives	84.06 kgs
			5. Pigment Carbon Black	105.00 kgs
A2756	Liquid printing Ink – P.U. Based – in White colour – (For Food Grade Packaging) Pigment content – Minimum 27.8% Solid P.U. Resin content – Minimum 9.6%	1 MT	1. Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone, Ethyl Acetate	619.30 kgs
			2. Polyol	72.30 kgs
			3. Di-Isocyanate	15.80 kgs
			4. Ink Additives	30.41 kg
			5. Titanium Dioxide	278.00 kgs
A2757	Para Phenylene Diamine 2,5 Disulphonic Acid	1 kg	1. Para Phenylene Diamine	0.500 kg
A2758	Polyamide Sheet reinforced Flat Belt Made out of Nitrile Rubber Compound	1 kg	1. Synthetic Rubber (Nitrile)	0.49 kg/kg of the Rubber compound content in export
			2. Plasticizer (Thiakol)	0.058 kg/kg of the Rubber compound content in export
			3. Processing Aids (A C Polyethylene, Polythylene – Glycol – 4000)	0.01 kg/kg of the Rubber compound content in export
			4. Nylon Yarn 6 Industrial Grade (410+/- 10 Denier)	1.05 kg/kg content of Nylon fabric
			5. Polyamide Granules (Ultramid 1c & Ultramid 6a natural)	0.003 kg/kg content in export product
			6. Polyamide Sheets	1.050 kg/kg content in export product
			7. Bonding Agent (Resorcinol)	0.015 kg
A2759	Nylon Fabric with Grooved Black Rubber made out of Nitrile Rubber Compound	1 kg	1. Synthetic Nitrile Rubber	0.525 kg/kg of the Rubber Compound content in the export product
			2. Thiakol Plasticiser	0.0735 kg/kg of the Rubber Compound content in the export product
			3. Processing Aid (A C Polyethylene Glycol 4000)	0.0105 kg/kg of the Rubber Compound content in the export product
			4. Nylon 6 Yarn Industrial Grade (410 +/- 10 Denier)	1.10 kg/kg of Nylon Fabric in export product
A2760	Polyanionic Cellulose (containing 85% of Sodium Carboxy Methyl Cellulose)	1 kg	1. Acetic Acid	0.285 kg
			2. Acetic Anhydride	0.034 kg
			3. Soda Ash	0.207 kg
			4. Caustic Soda Flakes	0.170 kg

Annexure “C” to the
Public Notice No.35
Dated: 03/09/2001

ENGINEERING PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty Allowed
C1686	Mineral Insulated Resistance Temperature Detector (RTD) Assembly	1 No.	1. RTD Element of relevant specification	1 No.
C1687	Tungsten Contact having 55% +/- 2% Tungsten by weight	1 kg	1. Tungsten Rod	0.95 kg
C1687	Tungsten Contact having 55% +/- 2% Tungsten by weight	1 kg	2. Abrasive Wheel	3 Nos.
C1688	Twin Type Shaving System-Disposable Razer Blade-3 fixed with Lubra	1 Million pieces	1. CRSS Strips	735 kg
			2. ABS	10518 kg
			3. Aluminium Strips	63.65 kg
			4. TP Elastomer	3605 kg
			5. GP Polystyrene	1304 kg
			6. Polyox Coagulant	44 kg
			7. Polyox VSRN 750	44 kg
			8. GP Polystrene	38 kg
			9. Polyterafluoro-ethylene	0.9 kg
			10. Grinding Wheel	3 Pcs.
			11. Slitting Sheel	6 Pcs.
Note:- The CIF value of item of imports at Sl. No. 9, 10 and 11 taken together should not exceed 1% of FOB value of export.
C1689	Monocular/ Binocular Microscope	1000 Nos.	1. Halogen Lamp (6 V or 12 V – 20 W or 30 W)	1000 Nos.
			2. Stainless Steel Hard Wire 1.60 mm	32 Kgs.
			3. Stainless Steel Hard Wire 1.00 mm	32 Kgs.
			4. Stainless Steel Hard Wire 4.00 mm	32 Kgs.
			5. Step – down transformer/ power supply Unit input 120 V or 240 V output 6 V or 12 V	1000 Nos.
			6. Power Cord with Plug	1000 Nos.
			7. On-Off switch	1000 Nos.
			8. Relevant Achromatic objective lens	1000 Nos.
			9. Lamp Holder	1000 Nos.
			10. Socket with fuse	1000 Nos.
			11. Polyurethane Paint/ Grease	Upto 2% of FOB Value
C1690	Drive Shaft Assembly, Front Wheel Drive – LH/RH without ABS Ring	1 Pair	1. C/V Joint Boot Seal	2 Nos.
			2. T/P Boot Seal	2 Nos.
			3. Clamps	6 Nos.
			4. Molykote VN-2461 C Lithium Grease	0.25 Kg.
			5. CV Joint Grease	0.25 Kg.
			6. Shaft Ring	2 Nos.
			7. T/P Housing Blank	2 Nos.
			8. C/V Outer Race Blank	2 Nos.
			9. Spider Tripot Joint	2 Nos.
			10. C/V Inner Race	2 Nos.
C1691	Drive Shaft Assembly, Front Wheel Drive – LH/RH with ABS Ring	1 Pair	1. C/V Joint Boot Seal	2 Nos.
			2. T/P Boot Seal	2 Nos.
			3. Clamps	6 Nos.
			4. Molykote VN-2461 C Lithium Grease	0.25 Kg.
			5. CV Joint Grease	0.25 Kg.
			6. Shaft Ring	2 Nos.
			7. T/P Housing Blank	2 Nos.
			8. C/V Outer Race Blank	2 Nos.
			9. Spider Tripot Joint	2 Nos.
			10. C/V Inner Race	2 Nos.
			11. ABS Ring	2 Nos.
C1692	Stainless Steel LPG Stove with/ without auto Ignition	1 No.	1. Stainless Steel Sheet/ Coil of relevant grade	1.15 Kg/ Kg content in the export product
			2. Gas Valves with/ without Ignition Unit	Net to Net with accoun-tability
			3. Brass Honey Scrap	1.06 Kg/Kg content in export product
Note:- If the product is exported without Auto Ignition Unit, the import item No. 2 viz. Gas Valve shall be allowed without Ignition Unit.
C1693	Hot Forged Steel nuts	1 No.	1. Forged Blank Nut without thread of Relevant grade of alloy/ non alloy steel and relevant size	1 No.
C1694	Copper Bonded Ground Rods UL approved (0.01 Inches copper coating)	1 Kg	1. M. S. Bright Bars/ Wire Rods	0.97 kg
C1694		1 Kg	2. Copper Bar/ Cathodes/ Wire Bars	0.08 kg

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password