PUBLIC NOTICE NO. 45(RE-2001)/1997-2002, Dt. 01/11/2001
Fixation and modification of input output norms
1. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-2779, the new entries at Sl.No.A-2780 to A-2789 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1699, the new entries at Sl.No.C-1700 to C-1710 shall be added as per Annexure ”C” to this Public Notice.
FOOD PRODUCTS
After the existing entry at Sl.No. E-104, the new entry at Sl.No.E-105 shall be added as per Annexure ”D” to this Public Notice.
5. This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(B. GANGAR)
DY.DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 45
Dated: 01/11/2001
AMENDMENTS/CORRECTIONS
| Sl.No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
| 1. | 84 | Chemicals & Allied Products
Sl.No.A591 | The description of import item at Sl. No. 1, shall be corrected (without any change in quantity) to read as under:-
“Picramic Acid/ Sodium Picramate”. |
| 2. | 162 | Chemicals & Allied Products
Sl.No.A1260 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1260 | Beta Phenyl Ethyl Amine | 1 kg | 1. Benzyl Cyanide | 1.200 kg |
| OR |
| 1. i) Benzyl Chloride | 1.504 kg |
| 1. ii) Sodium Cyanide | 0.582 kg |
| 2. Isopropyl Alcohol | 0.400 kg |
| 3. Methanol | 0.033 kg |
| 4. Neckel Catalyst | 0.012 kg |
| 3. | 169 | Chemicals & Allied Products
Sl.No.A1360 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1360 | Hexamethyl Disilazane | 1 kg | 1. a) Hexa Methyl Disiloxane | 1.49 kg |
| 1. b) Residual Polymer Mixture/Volatile Cyclic Mixture containing approx. 95% Silicone content | 0.878 kg |
| OR |
| 1. b) Dimethyl Dichloro Silane | 1.309 kg |
| OR |
| 1.a)Trimethyl Chloro-silane (TMCS) | 1.50 kg |
| 1. b)Toluene | 0.10 kg |
| 1. c) Ammonia Gas | 0.35 kg |
| 4. | 186 | Chemicals & Allied Products
Sl.No.A1539 | The description of import item at Sl. No.3 shall be amended (without any change in quantity) to read as under:-
“3. Meta Cresol/Meta Para Cresol” |
| 5. | 187 | Chemicals & Allied Products
Sl.No.A1544 | 1. The description of export item shall be amended to read as under:-
“Soya Long Oil Alkyd of 62% Oil length with Solid content 70 + 2% and MTO 30 + 2%”
2. After the import item at Sl. No. 4, the following additional import item (with quantity) shall be added:-
“5. Mineral Turpentine - 31.5 kgs”
Oil (MTO) |
| 6. | 198 | Chemicals & Allied Products
Sl.No.A1614 | After the import item at Sl. No. 1 against this entry, the following alternative item (with quantity) shall be added:-
“OR
Liquid Bromine - 1.548 kg ” |
| 7. | 240 | Chemicals & Allied Products
Sl.No.A1790 | After the description of import item at Sl. No.8, the following item (with quantity) shall be added:-
“9. Furnace Oil - 0.8127 Litre” |
| 8. | 248 | Chemicals & Allied Products
Sl.No.A1843 | 1. After the import item at Sl. No. 5 the following additional import item (with quantity) shall be added:-
“6. Furnace Oil As per Note 2 below”
2. The existing Note below this norm shall be read as Note 1 and after that the following Note shall be added:-
“Note: 2.The item No. 6 may be allowed @ 0.546 Ltr./kg of Polyester Texturised Yarn and @ 0.182 Ltr./kg of POY” |
| 9. | 6 | Chemicals & Allied Products
Sl.No.A2090 (as amended vide Public Notice No. 38 Dated: 01/11/2000) | The quantity of import item at Sl. No. 4 ( i.e. Triethyl Amine) shall be amended to read as under:-
“0.012 kg” |
| 10. | 285 | Chemicals & Allied Products
Sl.No.A2124 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2124 | Zeolite (Sodium Alumina Silicate) | 1 kg | 1. Sodium Silicate | 0.481 kg |
| OR |
| 1. i) Silica Sand | 0.340 kg |
| 1. ii) Soda Ash | 0.220 kg |
| 2. Aluminium Hydroxide | 0.480 kg |
| 3. Caustic Soda Flakes | 0.090 kg |
| 11. | 293 | Chemicals & Allied Products
Sl.No.A2197 | After the description of import item at Sl. No.3, the following item (with quantity) shall be added:-
“4. Furnace Oil 0.682 kg” |
| 12. | 17 | Chemicals & Allied Products
Sl.No.A2469 (as amended vide Public Notice No. 32 Dated: 01/09/2000) | The description of export item shall be corrected to read as under:-
“N-Ethyl 3-Carbomyl 4-Methyl – 6 Hydroxy – 2 Pyridone” |
| 13. | 20 | Chemicals & Allied Products
Sl.No.A2501 (as amended vide Public Notice No.42 Dated: 01/12/2000) | The existing Note at the end of this entry shall be substituted by the following:-
“Note: In case of different percentage of solution, the quantity of all the inputs may be allowed on pro-rata basis based on the percentage of import content in the export product” |
| 14. | 20 | Chemicals & Allied Products
Sl.No.A2534 (as amended vide Public Notice No.53 Dated: 01/02/2001) | The description of import items at Sl. Nos. 3, 4, & 6 shall be corrected (without any change in quantities) to read as under:-
“3. Epoxydised Soyabean Oil
4. PVC Stabilizer
6. Calcium Carbonate” |
| 15. | 15 | Chemicals & Allied Products
Sl.No.A2674 (as amended vide Public Notice No. 15 Dated: 01/06/2001) | The quantity of import item at Sl. No. 4 shall be corrected to read as under:-
“2.434 kgs.” |
| 16. | 18 | Chemicals & Allied Products
Sl.No.A2713 (As amended vide Public Notice No. 24 Dated: 02/07/2001 | 1. The quantity of import item at Sl. No. 10 (i.e. Nylon Fabric for Tyres of relevant GSM) shall be amended to read as under:-
“11 kgs”
2. At the end of this norm the following Note shall be added:-
“Note: The weight of each Tyre shall not be more than 580 gms + 2%” |
| 17. | 12 | Chemicals & Allied Products
Sl.No.A2742 (As amended vide Public Notice No. 35 Dated: 03/09/2001 | The description of export item shall be corrected to read as under:-
“Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40 + 2%)” |
| 18. | 393 | Electronics Products
Sl.No.B-134 | The description of export item shall be amended to read as under:-
“Quartz Analogue Wrist Watch Movement (including CKD/SKD thereof)” |
| 19. | 463-464 | Engineering Products
Sl.No.C253 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C253 | Plated Wires (Single/Stranded)
a) of Copper
or
b) of Copper Clad/Coated Steel
or
c) of Copper Alloy | 1 kg | 1. Base Metal
1. a) Copper Cathode/ Wire Bar/ C C Rod/Wire | 1.0 kg |
| OR |
| 1. b) Copper Clad/ Coated Steel Wire | 1.0 kg |
| OR |
| 1. c) Copper Alloy Wire/ Cathode/ Wire Bar/C C road/Wire | 1.0 kg |
| 2. Silver 99.9% purity (Ingot, Granuels, Plates or Powder) | 0.025 kg |
| 3. Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives | 2% of the FOB value of export |
| 4. Plastic Bobbins, Plastic Spools, Protective paper / film | As per Packing Policy |
Note: 1. Export product may have Silver, Nickel or Tin Plating on it, but Silver will be allowed only if the export product has Silver plating on it.
Note: 2. Import of base Metal in 1 a), b) or c) will be allowed depending on the base metal used in export product a) or b) or c). |
| 20. | 479 | Engineering Product
Sl.No.C297 | The description of export item shall be amended to read as under:-
“Stamping (Stator & Rotor sets) for electric Motors” |
| 21. | 606 | Engineering Product
Sl.No.C826 | The description of export item shall be amended to read as under:-
“Stainless Steel Kitchen Sinks” |
| 22. | 609 | Engineering Products
Sl.No.C844 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C844 | Steel Cops/ Pirn/Bobbin | 1 kg | 1. Hot finished Carbone Steel Seamless Tubes/ Pipes | 1.33 kg/kg content in export |
| 2. ABS Granuals / resin | 1.05 kg/kg content in export |
| 3. CRCA Steel Sheet/ Strips | 1.15 kg/kg content in export |
| 23. | 621-622 | Engineering Products
Sl.No.C923 to C926 | At the end of each of these norms the following Note shall be added:-
“Note: This norm shall also be applicable to exports made in “Cloth Roll” form.” |
| 24. | 642 | Engineering Products
Sl.No.C-980 | After the description of import item at Sl. No. 4 the following additional import item (with quantity) shall be added:-
“5. Atomised Iron Powder 0.135 kg.” |
| 25. | 10 | Engineering Products
Sl.No.C-1343 (as amended vide Public Notice No. 9 Dated: 01/05/2000) | The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-
“1. Cold Rolled Mild Steel Strips/ Coils/Sheets” |
| 26. | 734 | Engineering Products
Sl.No.C-1392 | 1. The description of import item at Sl. No. 1 & 3 shall respectively be amended (without any change in quantity) to read as under:-
"1.Continuous cast copper Rod/cathodes/wire bars (EC Grade)
3. XLPE compound/Cross Linkable LDPE Compound”
2. After the import item at Sl. No. 4(c) the following additional import item at Sl. No. (d) (with quantity) shall be added:-
“d). Filler material (Calcium 0.31 kg
Carbonate / Alumina / Kolin)” |
| 27. | 58 | Engineering Products
Sl.No.C-1614 (as amended vide Public Notice No. 04 Dated: 31/03/2001) | The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-
“1. Cold Rolled Mild Steel Strips/ Coils/Sheets” |
| 28. | 23 | Engineering Products
Sl.No.C1669 (as amended vide Public Notice No. 24 Dated: 02/07/2001) | The description of import item at Sl. No. 3 shall be corrected (without any change in quantity) to read as under:-
“3. Polypropylene Granules” |
| 29. | 24 | Engineering Products
Sl.No.C1671 (as amended vide Public Notice No. 24 Dated: 02/07/2001) | The description of export item shall be corrected to read as under:-
“Heat recovery Wheel (1 No. : Heat recovery Wheel incorporating Rotor of 1 Cubic Metre Volume having 1.9 mm flute height)” |
| 30. | 21-22 | Engineering Products
Sl.No.C1685 (as amended vide Public Notice No. 30 Dated: 01/08/2001) | 1. The description of import items at Sl. Nos.4,5,6,10,11,14,16,18,20,21,22, & 23 shall respectively be corrected (without any change in quantity) to read as under:-
“4. Fly Wheel
5. Carbon Steel of relevant grade
6. AG Break Motor
10. Bearing Case
11. Spherical Roller Bearing
14. Surge Tank
16. Front GIB Plate Right Hand
18. GIB Plate Rod
20. Gear End Plate
21. Cylinder
22. Worm Wheel
23. Dual Solenoid Valve” |
| 31. | 9-10 | Plastic Products
Sl.No.H-129 (As amended vide Public Notice No. 32 Dated: 01/09/2000) | The description of import items at Sl. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-
“7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion)
7. ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion)
8. i) Poligen WE 1 (Polyethylene based Wax Emulsion)
9. i) Surfinol 104H (Surfactant) (2,4,7,9 Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol)
9. ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate)
9. iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)” |
| 32. | 10-11 | Plastic Products
Sl.No.H-130 (As amended vide Public Notice No. 32 Dated: 01/09/2000) | The description of import items at Sl. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-
“7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion)
7. ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion)
8. i) Poligen WE 1 (Polyethylene based Wax Emulsion)
9. i) Surfinol 104H (Surfactant) (2,4,7,9 Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol)
9. ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate)
9. iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)” |
| 33. | 934-35 | Plastic Products
Sl.No.H-367 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-367 | Nylon-6/ Nylon-66 Monofilament Yarn wound on Disposable Bobbins | 1 kg | 1. Relevant Nylon-6/ Nylon-66 Chips | 1.05 kg/kg content in the export product |
| 2. Antioxidant | 0.002 kg |
| 3. Finish Oil | 0.001 kg |
| 4. Surface Active Agent | 0.001 kg |
| 5. Polypropylene Granules for Bobbins | 1.05 kg/kg content in the export product |
Note: 1. Only the relevant grade of Nylon Chips as contained in the export product shall be allowed.
Note: 2. When export is not on Bobbins, Polypropylene Granules shall not be allowed for import. |
| 34. | 24 | Plastic Products
Sl.No.H-440 (incorporated vide Public Notice No. 15 Dated: 01/06/2001)
(Col. No. 3 of S.No.34 has been amended vide PN.No. 58(RE-01), dt. 1/1/2002. ) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H440 | Aluminum Metalised BOPP Film | 1 kg | 1. BOPP Film | 1.10 kg |
|---|
| OR |
| 1. Polypropylene Resin/Granules | 1.32 kg |
| 2. Aluminium Wire | 0.0246 kg |
| 3. Induction/ Evaporation Boats | 0.007 kg |
| 35. | 956 | Textile Products
Sl.No.J-4 | After the description of import item at Sl. No. 2 the following additional import items (with quantities) shall be added:-
“3. Lubricating agent 0.05 kg/kg
(50% Concentration)
4. Cone centres net to net basis |
| 36. | 11 | Textile Products
Sl.No.J-92 (as amended vide Public Notice No. 30 Dated: 01/08/2001) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-92 | Cotton fabric – dyed with/without elaston/lycra/ spandex yarn | 1 kg | 1. Cotton Yarn | 1.10 kg |
| OR |
| 1. Raw cotton for carded counts of yarn of 40s & below | 1.225 kg/kg content in the export product |
| OR |
| 1. Raw cotton for combed counts of yarn of 40s and below | 1.289 kg/kg content in the export product |
| OR |
| 1. Raw cotton for combed counts of yarn of above 40s | 1.325 kg /kg content in the export product |
| 2. Polyvinyl Alcohol (PVA) Sizing Material | 0.01 kg |
| 3. Sodium Hydrosulphite | 0.02 kg |
| 4. Vat/reactive sulphur/ pigment dyes (100% strength) | 0.015 kg |
| 5. Elaston/ lycra/ spandex yarn | 1.05 kg/kg of materials content in the export product |
| OR |
| 5. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) | 1.05 kg/kg of materials content in the export product |
| 6. Fuel for power generation Naphtha | 5.50 kg |
| OR |
| 6. Furnace Oil | 4.10 ltrs |
Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.
Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. |
| 37. | 12 | Textile Products
Sl.No.J-96 (as amended vide Public Notice No. 40 Dated: 01/10/2001) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J96 | Cotton indigo blue dyed denim cloth with/ without elaston /lycra/ spandex yarn | kg | 1. Raw Cotton | 1.24 kg/kg content in export |
| OR |
| 1. Cotton Yarn | 1.04 kg/kg content in export |
| 2. Vat Indigo Blue Dye | 0.05 kg |
| 3. Polyvinyl Alcohol | 0.03 kg |
| 4. Sodium Hydrosulphite | 0.02 kg |
| 5. Caustic Soda Flakes | 0.02 kg |
| 6. Elaston/ lycra/ spandex yarn | 1.05 kg/kg of materials content in the export product |
| OR |
| 6. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) | 1.05 kg/kg of materials content in the export product |
| 7. Polyacrylic Synthetic sizing agent | 0.016 kg |
| 8. Sulfoesterifiedamide starch/ modified starch | 0.044 kg |
| 9. Fuel for power generation - Naphtha | 1.22 kg |
| OR |
| 9. Furnace Oil | 0.92 litres |
Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.
Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. |
| 38. | 1014 | Textile Products
Sl.No.J-308 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-308 | Cotton yarn dyed fabrics/made-ups with/without elaston/ lycra/ spandex yarn | 1 kg | 1. Cotton Yarn | 1.10 kg |
| 2. Polyvinyl Alcohol (PVA) Sizing Materials | 0.01 kg |
| 3. Sodium Hydro Sulphite | 0.02 kg |
| 4. Vat/reactive/ sulphur/ pigment dyes (100% strength) | 0.015 kg |
| 5. Elaston/ lycra/ spandex yarn | 1.05 kg/kg of materials content in the export product |
| OR |
| 5. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) | 1.05 kg/kg of materials content in the export product |
| 6. Fuel for power generation - Naphtha | 5.50 kg |
| OR |
| 6. Furnace Oil | 4.10 litres |
Note: 1. Naphtha and Furnace Oil shall be allowed only under AU condition.
Note: 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have a captive power plant using “Naphtha/Furnace Oil” as fuel. |
Annexure “B” to the
Public Notice No. 45
Dated: 01/11/2001
CHEMICALS AND ALLIED PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2780 | Ametryn Technical 98% Minimum | 1 kg | 1. Cyanuric Chloride | 0.900 kg |
| 2. Isopropyl Amine (70%) | 0.412 kg |
| 3. Mono Ethyl Amine (70%) | 0.314 kg |
| 4. Toluene | 0.245 kg |
| 5. Thiourea | 0.630 kg |
| 6. Dimethyl Sulphate | 0.548 kg |
| 7. Sodium Hydroxide | 1.174 kg |
| A2781 | Cetyl/ Hexadecyl Trimethyl Ammonium Chloride (25% by weight) | 1 kg | 1. Dimethyl Palmityl Amine | 0.222 kg |
| A2782 | Polyethylene Glycol 300 | 1 kg | 1. Diethylene Glycol | 0.346 kg |
| 2. Potassium Hydroxide | 0.001 kg |
| 3. Acetic Acid | 0.001 kg |
| A2783 | Anisyl Acetone | 1 kg | 1. Phenol | 1.80 kg |
| A2784 | Sodium Phenoxy Acetate | 1 kg | 1. Phenol | 0.749 kg |
| 2. Sodium Bicarbonate | 0.508 kg |
| 3. Caustic Soda | 0.350 kg |
| 4. Mono Chloro Acetic Acid | 0.818 kg |
| 5. Soda Ash | 0.519 kg |
| A2785 | Sultamicillin Tosylate | 1 kg | 1. 6-APA | 2.35 kg |
| 2. Ampicillin Trihydrate BP93 | 0.96 kg |
| 3. Potassium Permanganate | 4.70 kg |
| 4. 2-Ethyl Hexanoic Acid | 1.02 kg |
| 5. Methyl Aceto Acetate | 0.70 kg |
| 6. Isopropyl Alcohol | 3.94 kg |
| 7. Methylene Chloride | 3.76 kg |
| 8. Di-Methyl Formamide | 1.18 kg |
| A2786 | Potassium Persulfate | 1 kg | 1. Potassium Sulfate | 0.710 kg |
| A2787 | 2, 4-Dimethyl-3- Pentyloxy Phthalo dinitrile (Alkoxy-Dinitrile) | 1 kg | 1. 2,4 Dimethyl 3 Pentanol | 0.738 kg |
| 2. Sodium hydride (60% dispersion in Paraffin wax) | 0.254 kg |
| 3. Tetra Hydro Furan | 0.748 Litre |
| A2788 | 1,1 Dimethyl-3-Hydroxy-Butyl Peroxy Neo-Heptanoate | 1 kg | 1. Hexylene Glycol | 0.336 kg |
| 2. Neo Heptanoyl Chloride | 0.354 kg |
| 3. Hydrogen Peroxide 50% | 0.197 kg |
| 4. Odourless mineral spirit | 0.435 kg |
| A2789 | Lead Stearate Based PVC Stabilizer | 1 kg | 1. Lead Ingots | 0.287 kg |
| 2. Stearic Acid | 0.742 kg |
| 3. Relevant Wax | Net to net |
| Note: The above norms are on 100% Lead Stearate basis. For formulated product containing Lead Streate of different percentage, the requirement of inputs may be worked out on pro-r |
Annexure “C” to the
Public Notice No. 45
Dated: 01/11/2001
ENGINEERING PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| C1700 | SRM-9000, (Radio Frequency Assembly) | 1 No | 1. Integrated Circuits (IC) | 2600 Nos. |
| 2. Capacitor: |
| 2. (i) Ceramic | 32294 Nos. |
| 2. (ii) Polyfilm | 900 Nos. |
| 2. (iii) Tantalum | 4300 Nos. |
| 3. Shieldtray | 100 Nos. |
| 4. Shield Cover | 100 Nos. |
| 5. PCBs | 100400 Nos. |
| 6. Connectors | 100 Nos. |
| 7. Transistors | 7100 Nos. |
| 8. Diodes | 4400 Nos. |
| 9. Resistors (Film) | 42000 Nos. |
| 10. Inductors (Coil) | 6895 Nos. |
| 11. Transformers | 100 Nos. |
| 12. Thermister | 100 Nos. |
| 13. Solder Paste | 2.30 kg. |
| C1701 | Ferro Calcium Cored Wire (Calcium Ferro wire) – Powder Specification to be indicated by the applicant | 1 MT of powder content | 1. Calcium Metal Granules | 1.02 kg/kg content calcium in the export product |
| 2. Iron Powder | 1.015 kg/kg content of Iron in the export product |
| C1702 | Silver Alloyed Contacts (containing silver more than 50% and other alloying metals) | 1 kg | 1. Un-wrought silver having purity more than 99.95% | 1.03 kg/kg content of silver in the export product |
| 2. Any other relevant alloying metal | 1.03 kg/kg content of relevant alloying metal in the export product |
| C1703 | Lacquered Electrolytic Tin Plate Sheet | 1 kg | 1. Eletrolytic Prime Quality Tinplate of relevant thickness | 1 kg |
| 2. Relevant Lacquer | 0.01 kg |
| C1704 | Copper Clad/ Coated Steel Wire: Single or stranded having single wire less than 0.5 mm dia | 1 kg | 1. Copper Clad/ coated Steel wire more than 1 mm diameter | 1.02 kg |
| 2. Wire Drawing Dies, Drawing Lubricants welding Dies | 2% of the FOB value of export |
| 3. Plastic Bobbins, Plastic Spools, protecting paper/films | As per packing policy |
| C1705 | 1.Resistance Wire: single or stranded or wound on Fibre Glass Core having single wire less than 0.5 mm, using
a) Copper Nickel Alloy(s)
Or
b)Nickel Chromium Alloy(s) | 1 kg | 1. (a) Copper Nickel Alloy Wire 1.00 mm or more diameter | 1.00 kg |
| or |
| 1. (b) Nickel Chromium Alloy Wire 1.00 mm or more diameter | 1.00 kg |
| 2. Alloy Master batches/ Wire Drawings Dies/ Welding Dies Glass Fibre Yarn | 2% of the FOB value of export |
| 3. Plastic Bobbins, Plastic Spools, Protective Paper/ film, Drawing Lubricants | As per Packing Policy |
| Note: Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b) |
| C1706 | Pump set with AC SQ Induction Motor | 1 set | 1. AC SQ Induction motor of relevant wattage & speed | 1 No. |
| C1707 | AA Alkaline Battery (24 gms) | 1 No. | 1. Electrolytic Manganese Dioxide | 10.34 gms |
| 2. Zinc Powder | 4.12 gms |
| 3. Potassium Hydroxide Flakes | 1.6 gms |
| 4. Zinc Oxide Powder | 0.07 gm |
| 5. Crystalline Graphite Powder/ Synthetic/ Natural Graphite | 0.628 gm |
| 6. Gallant Powder/ Galling Agent I & II | 0.043 gm |
| 7. Indium Acetate Powder | 0.0024 gm |
| 8. Sealent/Asphati Piton C/A&P/T | 0.04 gm |
| 9. Surfactant | 0.0002 gm |
| 10. Paper for Laminated Non-woven Separator / (Main & Bottom) | 0.172 gm |
| 11. Nickel Plated Steel Cane | 1 No. |
| OR |
| 11. Non Alloy Steel Sheet | 5.9 gms |
| 12. Tin Plated Brass Wire/ Conductor | 0.43 gm |
| 13. Nylon/Plastic Top | 1 No. |
| 14. Re-inforcing Support Ring | 1 No. |
| OR |
| 14. Non Alloy Steel Sheet | 1.26 gms |
| 15. Negative Steel Cap | 1 No. |
| OR |
| 15. Non Alloy Steel Sheet | 0.42 gms |
| 16. PVC Shrink Foil/ Shrink Sleeve | As per packing policy |
| 17. PVC Label | 1 No. |
| OR |
| 17. Self-Adhesive PVC Sheet for Label | 4.2 sq.inch. |
| 18. Duplex Board for Packing | As per packing Policy |
| 19. Carbon Coating/ Carbon Paste | 0.026 gms |
| 20. NS Clean} | 1% of FOB if non alloy steel sheet for cap, can & ring are imported. |
| 21. Press Oil } |
| C1708 | Cooling Tower complete including in completely knocked down condition, with or without accessories and other parts | 1 No. (weight alongwith contents of various inputs to be indicated) | 1. Isopthalic Polyester Resin | 630 gm/kg GRP Component content in the export product |
| 2. Glass Roving/ chopped strand mat/surface mat/ woven rovings | 420 gm/kg GRP component content in the export product |
| 3. Polypropylene | 1.05 kg/kg polypropylene component content in the export product |
| 4. PVC Fill Sheet | 1.05 kg/kg PVC fill sheet component content in the export product |
| OR |
| The following inputs with their quantity for making 1 kg of PVC fill sheet:- |
| a. PVC Resin (Suspension Grade) | 0.945 kg |
| b. Titanium Dioxide | 0.060 kg |
| c. Processing Aid | 0.011 kg |
| d. Impact Modifier | 0.014 kg |
| e. Paraffin Wax | 0.005 kg |
| f. Calcium Citrate | 0.003 kg |
| g. Lubricant/ Heat Stabiliser | 0.038 kg |
| h. Filler (Calcium Carbonate) | 0.021 kg |
| i. Carbon Black | 0.002 kg |
| 5. Relevant Bearings | Net to net basis with accountability clause |
| C1709 | Suspension Hanger made of stainless steel wire- Grade AISI 302 | 1 kg | 1. Stainless Steel wire Rods – Grade AISI 302 | 1.02 kg/kg content in the export product |
| C1710 | Polyesterimide Enamelled copper Wire/Strip | 1 kg | 1. Copper wire Rod / cathodes | 1.01 kg/kg content in the export product |
| 2. Polyestermide enamel | 1.01 kg/kg content in the export product |
Annexure “D” to the
Public Notice No. 45
Dated: 01/11/2001
FOOD PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| E105 | Pan Masala | 1 kg | 1. Betal Nut | 740 gms. |
| 2. Catechu | 90 gms. |
| 3. Natural Essential Oil | 15 gms |
| 4. Saffron | 01 gm |
| 5. Cardamom | 15 gms |
Presented by eximkey.com