PUBLIC NOTICE NO. 67(RE-2001)/1997-2002, Dt. 01/02/2002.
Fixation and modification of input output norms
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-2801, the new entries at Sl.No.A-2802 to A-2822 shall be added as per Annexure "B" to this Public Notice.
ELECTRONICS PRODUCTS
After the existing entry at Sl.No.B-246, the new entry at Sl.No.B-247 shall be added as per Annexure "C" to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1735, the new entries at Sl.No.C-1736 to C-1743 shall be added as per Annexure "D" to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sl.No.J-349, the new entry at Sl.No.J-350 shall be added as per Annexure "E" to this Public Notice.
MISCELLANEOUS PRODUCTS
After the existing entry at Sl.No.K-144, the new entry at Sl.No.K-145 shall be added as per Annexure "F" to this Public Notice.
5. This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(B.GANGAR)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure "A" to the
Public Notice No.67
Dated: 01/02/2002
AMENDMENTS/CORRECTIONS
Sl. No. | Page No. | Reference | Amendments/Corrections |
1 | 2 | 3 | 4 |
1. | 8 | Chemicals & Allied Products Sl.No.A26 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A26 | CMIC Chloride | 1 kg | 1. Ortho Chloro Benzaldehyde | 0.86 kg |
2. Hydroxylamine Sulphate | 0.61 kg |
3. Methyl Aceto Acetate | 1.62 kg |
4. Sodium Carbonate | 0.72 kg |
5. Phosphorus Pentachloride | 0.91 kg |
6. Sodium Hydroxide (Caustic Soda Flakes) | 0.49 kg |
7. Chloroform | 0.80 kg |
8. Methylene Chloride/ Toulene | 0.70 kg |
9. Methanol | 3.94 kg |
2. | 33 | Chemicals & Allied Products Sl.No.A166 | The description of import item at Sl. No. 2 shall be amended (with quantity) to read as under:- |
"2. D-Camphor Sulfonic Acid | 0.505 kg |
OR
2(i) D-Camphor Sulfonic Acid | 0.190 kg |
(ii) Tartaric Acid | 0.315 kg |
3. | 35 | Chemicals & Allied Products Sl.No.A176 | The description of import item at Sl. No. 3 shall be amended (with quantity) to read as under:- |
3. D-Camphor Sulfonic Acid | 0.43 kg |
OR
3(i) D-Camphor Sulfonic Acid | 0.16 kg |
(ii) Tartaric Acid | 0.27 kg |
4. | 37 | Chemicals & Allied Products Sl.No.A187 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A187 | DICMIC Chloride | 1 kg | 1. 2,6 Dichloro Benzaldehyde | 0.81 kg |
2. Hydroxylamine Sulphate | 0.54 kg |
3. Methyl Aceto Acetate | 0.49 kg |
4. Phosphorus Pentachloride | 0.77 kg |
5. Caustic Soda Flakes | 0.37 kg |
6. Sodium Carbonate | 0.40 kg |
7. Sodium Methoxide | 0.45 kg |
8. Chloroform | 0.80 kg |
9. Methylene Chloride/ Toluene | 0.70 kg |
10. Methanol | 3.94 kg |
5. | 172 | Chemicals & Allied Products Sl.No.A1384 | The description of import item at Sl. No. 6 shall be amended (without any change in quantity) to read as under:-
Aluminium Chloride Anhydrous Minimum Purity 99.5% |
6. | 175 | Chemicals & Allied Products Sl.No.A1426 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1426 | N-Ethyl N-Benzyl Aniline | 1 kg | 1. Mono Ethyl Aniline
OR | 0.733 kg |
1. a) Aniline | 0.626 kg |
1. b) Ethyl Alcohol Denatured (95%) | 0.328 kg |
2. Benzylchloride | 0.665 kg |
3. Caustic Soda Lye (46% w/w) | 0.548 kg |
7. | 175 | Chemicals & Allied Products Sl.No.A1431 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1431 | N-Propyl Bromide | 1 kg | 1. n-Propanol | 0.620 kg |
2. Liquid Bromine
OR | 0.840 kg |
Hydrobromic Acid 48%
OR | 1.727 kg |
Hydrobromic Acid 47% | 1.763 kg |
8. | 181 | Chemicals & Allied Products Sl.No.A1494 | The description of export product shall be amended to read as under:-
"Styrenated Phenol (SPH) (2,4-Di (Alpha-Phenylethyl)-Phenol)" |
9. | 197-98 | Chemicals & Allied Products Sl.No.A1611 | The description of import item at Sl. No. 2(vi), shall be amended (without any change in quantity) to read as under:-
"Aluminium Chloride Anhydrous Minimum Purity 99.5%" |
10. | 199 | Chemicals & Allied Products Sl.No.A1623 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1623 | D. V. Acid Chloride 98% Minimum | 1 kg | 1. Isobutylene | 0.467 kg |
2. Acrylonitrile | 0.514 kg |
3. Acetonitrile | 0.054 kg |
4. Triethylamine | 0.047 kg |
5. Carbon Tetra Chloride | 1.478 kg |
6. Thionyl Chloride | 1.867 kg |
7. Dimethyl Formamide | 0.070 kg |
8. Caustic Soda Flakes | 3.05 kg |
9. Boron Trifluoride Dimethylethe | 0.0087 kg |
11. | 255-56 | Chemicals & Allied Products Sl.No.A1902 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1902 | Profenofos Technical (Minimum 87%) | 1 kg | 1. N-Propanol
OR | 0.215 kg |
N-Propyl Bromide | 0.363 kg |
2. Diethyl Phosphoro Chloride Thioate | 0.558 kg |
3. Ortho-Chlorophenol | 0.422 kg |
4. Bromine | 0.525 kg |
12. | 291 | Chemicals & Allied Products Sl.No.A2175 | The description of import item at Sl. No. 6 shall be amended (without any change in quantity) to read as under:-
"Aluminium Chloride Anhydrous Minimum Purity 99.5%" |
13. | 311-12 | Chemicals & Allied Products Sl.No.A2323 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A2323 | FCMIC Chloride | 1 kg | 1. 2-Fluoro-6-Chloro Benzaldehyde | 0.91 kg |
2. Hydroxylamine Sulphate | 0.61 kg |
3. Methyl Aceto Acetate | 0.87 kg |
4. Sodium Hydroxide | 0.86 kg |
5. Phosphorus Pentachloride | 0.84 kg |
6. Sodium Carbonate | 0.45 kg |
7. Chloroform | 0.80 kg |
8. Methylene Chloride/Toluene | 0.70 kg |
9. Methanol | 3.94 kg |
14. | 23 | Chemicals & Allied Products Sl.No.A2426 (Amended Vide Public Notice No.09 Dated: 01/05/2000) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A2426 | Glyphosate 41% SL | 1 Litre | 1. IsoPropyl Amine Salt of Glyphosate Tech. 62% | 0.782 kg |
2. Surfactant- (Inert- Polyoxy Ethylene) | 0.150 kg |
15. | 15 | Chemicals & Allied Products Sl.No.A2458 (amended vide Public Notice No. 32 Dated:01/09/2000) | The description of export product shall be amended to read as under:-
"Monoethyl Meta Toluidine/ N ethyl 3-Toluidine" |
16. | 17 | Chemicals & Allied Products Sl.No.A2490 (amended vide Public Notice No. 42 Dated:01/12/2000) | The description of export product shall be amended to read as under:-
"Polyurethane Wheels containing 1 kg of Polyurethane content" |
17. | 34 | Chemicals & Allied Products Sl.No.A 2569 (Amended Vide Public Notice No. 04 Dated: 31/03/2001) | The description of import item at Sl. No. 1 shall be corrected (without any change in quantity) to read as under:-
"Methacrylonitrile" |
18. | 40 | Chemicals & Allied Products Sl.No.A 2606 (Amended Vide Public Notice No. 04 Dated: 31/03/2001) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A2606 | S (+) Ibuprofen/S(+) –2-(4-Isobutyl Phenyl) Propionic Acid/ Dexibuprofen | 1 kg | 1. 2-Chloro Propionyl Chloride
OR | 1.233 kg |
i) 2 Chloro Propionic Acid | 1.064 kg |
ii) Thionyl Chloride | 1.20 kg |
2. Isobutyl Benzene | 1.164 kg |
3. L-(-)Alpha Phenyl Ethylamine | 0.12 kg |
4. Ethylene Dichloride | 0.203 kg |
5. Sodium Hydroxide | 0.57 kg |
6. Neophenylene Glycol | 1.088 kg |
19. | 40 | Chemicals & Allied Products Sl.No.A 2607 (Amended Vide Public Notice No. 04 Dated: 31/03/2001) | The description of export item shall be amended to read as under:-
"Cyano Cobolamine (Vitamin B-12) BP/USP its Salts and Esters" |
20. | 4 | Chemicals & Allied Products Sl.No.A 2691 (Amended Vide Public Notice No. 20 Dated: 11/06/2001) | The note below this entry shall be replaced by the following note:-
"Note: This norm is valid upto 31.03.2002." |
21. | 4 | Chemicals & Allied Products Sl.No.A 2692 (Amended Vide Public Notice No. 20 Dated: 11/06/2001) | The note below this entry shall be replaced by the following note:-
"Note: This norm is valid upto 31.03.2002." |
22. | 4 | Chemicals & Allied Products Sl.No.A 2693 (Amended Vide Public Notice No. 20 Dated: 11/06/2001) | The note below this entry shall be replaced by the following note:-
"Note: This norm is valid upto 31.03.2002." |
23. | 15 | Chemicals & Allied Products Sl.No.A2701 (Amended Vide Public Notice No. 24 Dated: 02/07/2001) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A2701 | Sulpho Gamma Acid (7-Amino 1-Naphthol 3,6 Disulphonic Acid) | 1 kg | 1. Beta Naphthol | 2.500 kgs |
2. Caustic Soda Flakes | 2.606 kgs |
24. | 505 | Engineering Products Sl.No.C390 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C390 | Powrah/Hoe/Pick-axe/ Kudali/ Pick Mattock/Cutter Mattock/ Trowel/ Transplantor/ Fork/ Cultivator/ Weeder/ Bulb Planter/ Combination Tool made of Non Alloy Steel/ Alloy Steel (including Stainless Steel) | 1 kg | 1. Non-Alloy Steel/ Alloy Steel (including Stainless Steel) Round/ Billets/ Plates/Coils | 1.250 kg/kg content in export product |
2. Epoxy Powder | 1.20 kg/kg content in export product |
25. | 8 531 | Engineering Products Sl.No.C472 (As amended vide Public Notice No. 24 Dated: 02/07/2001 | 1. In the description of export item, the word given in the bracket "Collugated" shall be corrected to read as under:-
"Corrugated"
2. The description of import item at Sl. No. 1 shall be corrected (with quantity) to read as under:- |
1. Cold Rolled Non-Alloy Steel Sheets/ Strips/ Wide Coils | 1050 kgs/1000 kgs content in the export Product" |
26. | 8
531 | Engineering Product Sl.No.C473 (As amended vide Public Notice No. 24 Dated: 02/07/2001 | 1. In the description of export item, the word given in the bracket "Collugated" shall be corrected to read as under:-
"Corrugated"
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
"1118 kgs/ 1000 kgs content in the export product" |
27. | 572 | Engineering Products Sl.No.C587 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C587 | Bushing Reverse Ball Valve made of Aluminum Alloy (Grade AA2011T3) (Motor Vehicle Part) | 1 MT | 1. Aluminium Alloy Rod (Grade AA2011T3 dia 20 mm) | 1.60 MT/MT content in the export product |
2. Tools namely Collet, Guide Bush, Carbide Form Cutter (HOB), Carbide Drill/Twist Drill | Upto 5% of FOB value of export |
28. | 573 | Engineering Products Sl.No.C588 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C588 | Bushing Third Ball Valve made of Aluminum Alloy (Grade AA2011T3) (Motor Vehicle Part) | 1 MT | 1. Aluminium Alloy Rod (Grade AA2011T3 dia 20 mm) | 1.45 MT/MT content in the export product |
2. Tools namely Collet, Guide Bush, Carbide Form Cutter (HOB), Carbide Drill/Twist Drill | Upto 5% of FOB valve of export |
29. | 8 | Engineering Products Sl.No.C608 (Amended vide Public Notice No. 35 Dated: 03/09/2001) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C608 | Component of Electric Teeth Plaque removing Brush: Rack Pin | 1 kg | 1. Stainless Steel Rods/ Coil upto 1.5 mm thick (AISI 416 T) | 2 kg |
30. | 9 | Engineering Products Sl.No.C980 (corrected vide Public Notice No. 45 Dated: 01/11/2001) | The description of import item at Sl. No. 5 shall be amended (without any change in quantity) to read as under:-
"Iron Powder" |
31. | 657 | Engineering Products Sl.No.C1058 | The descriptions of import items at Sl. Nos. 1 & 2 shall be amended (with quantity) to read as under:- |
1. a) Pure Lead | 1.02 kg/kg content in the export product |
b) Antimony | 1.02 kg/kg content in the export product |
c) Lead Calcium Alloy | 1.04 kg/kg content in the export product |
OR
1 a) Pure Lead | 1.02 kg/kg content in the export product |
b) Antimonial Lead Alloy | 1.02 kg/kg content in the export product |
2 Battery Separators
OR | Net to net |
2. Rolls of Battery Separators | 1.05 Sq.Mtr./Sq.Mtr content in the export product |
OR
2(a)Synthetic Pulp Porous Paper Sheet | 1.05 kg/kg content in the export product |
OR
(a) Polyethylene Sheet | 1.03 kg/kg content in the export product |
(b) Acid Resistant Glass | 1.05 kg/kg content in the export product |
(c) Nitrile Rubber Based Glue | 1.05 kg/kg content in the export product |
32. | 16-17 | Engineering Products Sl.No.C1395 (Amended vide Public Notice No. 63 Dated: 24/12/1998) | The norm covered by this entry in the SION Book shall be corrected to read as (i.e. as it already stands corrected vide P.N. No. 63 dated: 24.12.1998):- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C1395 | Single Phase Shell construction motors with aluminium or cast iron and covers - 0 watt to 90 watts | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in Coil form
OR | 47.80 gms/ watt |
CRCA Steel Sheets/Sheets in Coil form | 47.80 gms/ watt |
2. Copper Wire Bars/ Cathods/Rods/ winding Wires/ Strips | 10.41 gms/ watt |
3. Electrolytic grade Aluminium for Rotor | 10.00 gms/ watt |
4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity) for Housing | 10.00 gms/ watt |
OR
CRCA Sheets forHousing | 15.00 gms/ watt |
OR
Mild Steel Sheets for Housing | 10.99 gms/ watt |
5. EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft | 9.65 gms/ watt |
6. Ball/Sleeve/ Roller Bearing | 2 Nos.(Net to net) |
7. Composit insulation material consisting of paper, Nylon, Polyester, Amide, Nomex films, Varnish, Tape, Polyester cord | Upto 1.5% of FOB Value of export |
8. Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB Value of export |
9. Motor Protectors/ Thermal Protectors/ Thermo Strips | Net to net |
10. Power Capacitor | 1 No. (Net to net) |
11. Plastic Insulated Wire/Cable | 6 Mtr.(Net to net) |
12. Terminals, Connectors | 8 Nos. each (Net to net) |
33. | 63 | Engineering Products Sl.No.C1627 (Amended vide Public Notice No. 04 Dated: 31/03/2001) | The following note shall be added below this entry:-
"Note: Any alloy with more than 50% copper is to be considered as copper based Alloy and should be covered within the description of the export product indicated in SION C-1627" |
34. | 25-26 | Engineering Products Sl.No.C1677 (Amended vide Public Notice No. 24 Dated: 02/07/2001) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
C1677 | 1. PVC Insulated Unarmoured Control purpose Copper Cable Core area 1.62 Sq.mm Size 35/0.24 mm x Four Core | 1000 meters. | 1. Copper Cathode/ CC Rods/ Wire Bar/ ingot | 56.975 kg |
2. PVC resin | 87.3 kg |
3. Pthalate Plasticiser (DOP) | 43.65 kg |
4. Fillers (Forcal) | 14.55 kg |
2. 2 CORE x 1.5 sq.mm PVC insulated & Sheathed Cable with 1.0 sq.mm. Earth Conductor | 1000 meters | 1. Copper Cathode/ CC Rods/ Wire / Bar / Ingot | 33.926 kg |
2. PVC Resin | 32.382 kg |
3. Pthalate Plasticiser (DOP) | 16.191 kg |
4. Fillers (Forcal) | 5.702 kg |
35. | 21 | Engineering Products Sl.No.C-1684 (Amended vide Public Notice No. 30 Dated: 01/08/2001) | The SION entry at Sl. No. C-1684 of Engineering Group shall be deleted (shifted to Electronic Group (Category B) as per Annexure "C" to this Public Notice). |
Annexure "B" to the
Public Notice No.67
Dated: 01/02/2002
CHEMICALS AND ALLIED PRODUCTS
Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
A2802 | Phenyl Isocyanate | 1 kg | 1. Aniline | 0.875 kg |
2. Ethylene Dichloride | 0.400 kg |
A2803 | Alpha Cumyl Peroxy Neodecanoate, 75% in Odourless Mineral Spirit | 1 kg | 1. Cumene Hydroperoxide 90% | 0.527 kg |
2. Neodecanoyl Chloride | 0.532 kg |
3. Odourless Mineral Spirit | 0.106 kg |
A2804 | Tertiary Butyl Peroxy Pivalate 75% in Odourless Mineral Spirit | 1 kg | 1. Tertiary Butyl Alcohol | 0.354 kg |
2. Pivaloyl Chloride | 0.571 kg |
3. Hydrogen Peroxide (50%) | 0.358 kg |
4. Odourless Mineral Spirit | 0.250 kg |
A2805 | Phenmedipham Technical (97% Minimum) | 1 kg | 1. Meta Amino Phenol | 0.450 kg |
2. Methyl Chloro Formate | 0.398 kg |
3. Meta Tolyl Isocyanate | 0.514 kg |
4. Butyl Acetate | 0.800 kg |
5. Tri Ethyl Amine | 0.100 kg |
6. Sodium Hydroxide | 0.220 kg |
A2806 | Desmedipham Technical (97% Minimum) | 1 kg | 1. Meta Amino Phenol | 0.455 kg |
2. Ethyl Chloro Formate | 0.466 kg |
3. Phenyl Isocyanate | 0.464 kg |
4. Butyl Acetate | 0.850 kg |
5. Tri Ethyl Amine | 0.100 kg |
6. Sodium Hydroxide | 0.220 kg |
A2807 | Polyester Filament Fully Drawn Yarn (FDY) DOPF Dyed | 1 kg | 1. Polyester Chips | 1.00 kg |
2. Spin Finish Oil | 0.010 kg |
3. Master Batch | 0.105 kg |
4. Triethylene Glycol | 0.009 kg |
A2808 | Zirconium Oxide | 1 MT | 1. Zircon/ Zirconium Silicate | 2.5 MT |
A2809 | Zirconium Carbonate | 1 MT | 1. Zircon | 1.25 MT |
A2810 | Phenyl Isocyanate | 1 kg | 1. Aniline | 0.875 kg |
2. Ethylene Dichloride | 0.400 kg |
A2811 | Tetanus Antitoxin BP/1500 IU/ML | 1 lakh Am-poules | 1. Tetanus Antitoxin 4000 IU/ML 5000 I.U./ML | 47.625 Lit. |
2. Glass Ampoules | 115,000 Nos. |
A2812 | Adsorbed Tetranus Vaccine BP/Tetanus Toxoid 0.5 MI | 1 lakh Am-poules/Doses | 1. L-Cysreine | 0.00469 kg |
2. Thiomersal | 0.00525 kg |
3. N-Z-Case TT | 0.34700 kg |
4. L-Tyrosine | 0.00938 kg |
5. Aluminium Chloride 6 Hydrate Extra | 0.42000 kg |
6. Sodium Acetate Trihydrate | 0.01740 kg |
7. Tri Sodium Orthophosphate | 0.65625 kg |
8. Glass Ampoules | 115000 Nos. |
9. Shipping Indicators | 53 Nos. |
A2813 | Tetanus Antitoxin B.P 3000 IU/2ML | 1 lakh Vials | 1. Tetanus Antitoxin 4000IU/ML | 57.15 Ltrs. |
2. Glass Vials | 69000 Nos. |
3. Aluminium Caps/ Seals | 66000 Nos. |
4. Rubber Stoppers | 66000 Nos. |
5. Shipping Indicators | 210 Nos. |
A2814 | Sorbitan Mono Stearate (Stearic Acid ester of Sorbitol) | 1 kg | 1. Sorbitol | 0.406 kg |
2. Stearic Acid | 0.634 kg |
A2815 | Oleamide | 1 kg | 1. Oleic Acid | 1.18 kg |
A2816 | Stearamide | 1 kg | 1. Stearic Acid | 1.18 kg |
A2817 | Erucamide | 1 kg | 1. Erucic Acid | 1.18 kg |
A2818 | Lamivudine | 1 kg | 1. L(-) Tartaric Acid | 5.73 kg |
2. 1,4-Dithiane 2,5 Dihydroxy | 3.02 kg |
3. Cytosine | 1.24 kg |
4. Sodium Meta Periodate | 9.31 kg |
5. Tetrahydrofuran | 4.29 kg |
6. 2,2, 1-Trifluoric Ethylene | 3.29 kg |
7. Sodium Borohydride | 1.73 kg |
8. Trimethyl Iodosilane | 6.62 kg |
A2819 | N-Hydroxyl Ethyl Morpholine (2-Morpholine Ethanol) | 1 kg | 1. Triethanol Amine | 1.55 kgs |
A2820 | Polypropylene (Homopolymer) | 1 MT | 1. Naphtha | 1.273 MT |
2. Active SHAC-103 | 0.069 kg |
3. Triethyl Aluminium | 0.208 kg |
4. PEEB (SCA) | 0.139 kg |
5. Antioxidants (Irgonox-1010/ Irgonox-3114/ Ethanox-330/ Ultranox-6261 Irgophos-168) | 1.717 kg |
6. Additives (Hydrotalcite/ DHT-4A/ Emcamide/ Oleamide/ Gasil/ AB-720/ Glyceryl Mono Stearate (Myverol 18-6)/ Zinc Oxide/ Acrowax) | 2.500 kgs |
A2821 | Polyester Filament Fully Drawn Yarn (FDY) Raw White | 1 kg | 1. Polyester Chips | 1.05 kg |
2. Spin Finish Oil | 0.010 kg |
3. Triethylene Glycol | 0.009 kg |
A2822 | Esbiothrin (D+DL Allethrolone Route) | 1 kg | 1. D+DL Allethrolone | 0.547 kg |
2. Toluene | 0.217 kg |
3. Ethylene Dichloride | 1.533 kg |
4. Glycine Ethyl Ester Hydrochloride | 1.950 kg |
5. 2,5 Dimethyl 2,4 Hexadiene | 2.150 kgs |
6. L-Base (D-Threo-(1-P Nitro Phenyl) 2-Amino Propane 1,3 diol) | 0.431 kg |
7. Thionyl Chloride | 0.474 kg |
8. Pyridine | 0.295 kg |
9. Methanol | 0.444 kg |
10. Di Isopropyl Ether | 1.086 kg |
11. Sodium Nitrite | 0.958 kg |
12. Caustic Soda (100% base) | 2.840 kg |
Annexure "C" to the
Public Notice No.67
Dated: 01/02/2002
ELECTRONICS PRODUCTS
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
B-247 | Microwave ferrite Garnet | 100 kg | 1. Yttrium Oxide | 136.0 kg |
2. Iron Oxide | 150.0 kg |
3. Aluminium Oxide | 9.8 kg |
4. Tin Oxide | 6.3 kg |
5. Indium Oxide | 4.5 kg |
6. Poly Vinyl Alcohol} | cif value of item Nos. 6 & 7 taken together restricted to 10% of the FOB value |
7. Aluminum Substrate} |
Annexure "D" to the
Public Notice No.67
Dated: 01/02/2002
ENGINEERING PRODUCTS
Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
C1736 | Plastic (Ethylene Copolymer) Clad/Coated Tin Free Steel Tape for Cable Armouring containing 93% Tin Free Steel and 7% Plastic | 1 kg | 1. Tin Free Steel Sheets/Strips | 1.02 kg/kg content in export product |
2. Plastic (Ethylene Copolymer) | 1.05 kg/kg content in export product |
C1737 | 200 mm Compact regulator in CKD condition consisting of regulator body 165 kgs, cover 100 kgs, Hooks 6.2 kgs, all made of Zinc die casting alloy and other components | 1000 Nos. | Zinc Die Casting Alloy No. 5 confirming to any of the following,
International Std. Required for Jumbo regulator body, cover & Hooks:- 1. British - BS1004 1972 (1985) Alloy B 2. German-DIN 1743 Pt. 1 (1978) GB Zn A14 Cu1 3. Australian-AS 1881-1986 Zn A14 Cul. 4. ISO-ISO 301-1981 Zn A14 Cu 1 | 279.336 kgs. |
C1738 | 200 mm Coupling vertical/ horizontal consisting of coupling 137.8 kgs. Hooks 6.784 kgs. all made of Zinc Die casting Alloy and other components | 1000 Nos. | Zinc Die Casting Alloy No. 5 confirming to any of the following.
International Std. Required for Jumbo regulator body, cover & Hooks:- 1. British - BS1004 1972 (1985) Alloy B 2. German-DIN 1743 Pt.1 (1978) GB Zn A14 Cu 1 3. Australian-AS 1881-1986 Zn A14 Cul. 4. ISO-ISO 301-1981 Zn A14 Cu 1 | 148.926 kgs. |
C1739 | Nylon Filament Yarn (840 Denier and below) | 1 MT | 1. Nylon 6 Chips | 1.092 MT |
2. Spin Finish Oil | 18.9 kg |
C1740 | Handle Asembly made of Stainless Steel for operation of Butter Fly Valve | 1 No. | 1. Stainless Sheet/Strip/ Wide Coils made out of relevant grade | 1.45 kg/kg content in the export product |
C1741 | Coaster Brake Hub for Bicycle containing 263 gm of item 1 and 608 gm of item 2 | 1 Piece | 1. Non Alloy Steel CRCA/ HR Sheet/ Coil (Second/ Defective) | 513 Gms |
2. MS/Non Alloy Steel Round/ Rod | 1277 Gms |
Note: All the conditions given in note No. 1 to 8 below SION at C-122 will also be applicable for this SION. |
C1742 | Industrial Boiler/ sub assemblies of the Boilers | 1 No. | COMPONENTS:
1. Pump with motor | Net to net |
2. Level Switch | Net to net |
3. Liquid Level Gause | Net to net |
4. Flame Relay with base plate | Net to net |
5. Gas Train | Net to net |
6. UV Detector | Net to net |
7. Flexible Cables | Net to net |
8. Float | Net to net |
9. Stainless Steel Pressure Spring | Net to net |
10. Monoblock Burner | Net to net |
11. PID type temperature controller/ temperature indicator | Net to net |
12. Rod Assembly | Net to net |
13. Straight Through form Glove valve with stuffing box | Net to net |
14. Straight Way Stobu valve | Net to net |
15. Direct Acting Spring Loaded safety valve | Net to net |
16. Open Bonnet | Net to net |
17. Blowdown valves | Net to net |
18. Disc Check Valve | Net to net |
RAW-MATERIALS:
19. BQ Steel Plates | 1.05 kg/per kg content in the export product |
20. Welding electrode/ wire | 2% of the weight of the relevant steel to be welded |
21. Steel Tubes/ Pipes of relevant grade and size | 1.02 kg/ per kg content in the export product |
C1743 | Motorized three wheelers in CBU/ CKD/ SKD condition powered by diesel engines of capacity from 300 cc to 550 cc | 1 No. | RAW MATERIAL
1. HR/CR Sheet/ Strips/ Coils | 1.19 kg/kg content in the export product |
2. Aluminium Alloy Ingot | 1.07 kg/kg content in the export product |
3. Seamless Steel Tubes of relevant dia, thickness and grade | Net to net |
COMPONENTS
1. Main Shaft Assembly 2. Front Wheel Axle Assembly 3. Hub Pin Set 4. Differential Gear 5. Front Brake Drum 6. Rear Wheel Axle Assembly 7. Slider Block 8. Propeller Shaft (LH+RH) Set 9. Hydraulic Brake Assembly 10. Shock Absorber Rear (1Set= 2No.) 11. Shock Absorber Front 12. Gas Spring 13. Ball Brg.98025 14. Ball Brg. 6204-ZZ 15. Ball Brg. 6302 16. Speedometer 17. Control Cables (Set of 11) 18. Rear View Mirror Assembly 19. Wire Harness Main 20. Wire Harness Dashboard 21. Battery Cable Negative 22. Battery Cable Positive 23. Electrical Cables & Wires Set 24. Spring Front Suspension 25. Automotive Switches Set 26. Automotive Bulb (Set of 13) 27. Automotive Lights (Set of 10) 28. Lock Set with keys 29. Horn 12 V Dia 90 30. Tool Kit Set 31. Needle Bush - Main Housing 32. Needle Bearing - Crankcase, Front Wheel 33. Needle Bearing Rear Wheel/Hub 34. Needle Bush JL 188 NRB 35. Inner Ring - Cluster Gear 36. Battery 50 AH 37. Wiper Blade with Arm 38. Wiper Motor 39. Wiper Motor Mounting & Linkage Asembly 40. Windshield Glass 41. Voltage Regulator 42. Side Window Glasses (Set of 2) 43. Rear Window Glass 44. Front Wheel Hub 45. Rear Wheel Hub 46. Differential Cage 47. Oil Tight Hood 48. Flexible Coupling 49. Flywheel Mounted Alternator 50. Starter Motor 51. Cylinder 52. Cylinder Head 53. Piston Assembly 54. Fuel Injection Eqpt. 55. Flywheel 56. Feed Pump | Net to net |
Annexure "E" to the
Public Notice No.67
Dated: 01/02/2002
TEXTILE PRODUCTS
Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
J350 | Dyed twisted mulberry silk yarn (Degummed) | 1 kg | 1. Mulberry raw silk (gummed and untwisted) | 1.29 kg/kg content in the export product |
Annexure "F" to the
Public Notice No.67
Dated: 01/02/2002
MISCELLANEOUS PRODUCTS
Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
K145 | Shellac | 1 kg | 1. Seedlac | 1.10 kg |
Presented by eximkey.com