PUBLIC NOTICE NO. 168/2008, DT. 31/03/2009
SION for HDPE, Polyurethane Resin,and Phenol Formaldehyde Resin amended
In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/ additions/deletions/corrections in the Handbook of Procedures, Vol. II, 2004-2009, as amended from time to time
2. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After existing SION entry at Sl. No. H561, new entries at Sl. Nos. H562 to H568 are added as per Annexure “A” to this Public Notice (P.2-4).
This issues in public interest.
Sd/-
(R.S. GUJRAL)
Director General of Foreign Trade
ANNEXURE “A”
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H562 | HDPE Net Impregnated with Alpha Cypermethrin 0.55% | 1 kg | 1. HDPE Granules | 1.080 kg |
| 2. Alpha Cypermethrin 25% Granuals | 0.026 kg |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H563 | Polyurethane Resin Solution Containing 80% Resin Content and 20% Solvent) | 1 kg | 1. Adipic Acid | 0.291 kg |
| 2. Isophthalic Acid | 0.116 kg |
| 3. Phthalic Anhydride | 0.167 kg |
| 4. Diethylene Glycol | 0.079 kg |
| 5. Monoethylene Glycol | 0.199 kg |
| 6. 1.6 Hexane Diol | 0.012 kg |
| 7. Trimethylol Propane | 0.013 kg |
| 8. Toluene Di Isocyanate | 0.041 kg |
| 9. Ethyl Acetate (Solvent) | 0.200 kg |
| Note: For different %age of Resin Content, the requirement of import item No. 1 to 8 may be worked on pro-rata basis. For item No. 9 i.e. Ethyl Acetate (Solvent) the requirement may be worked out in the inverse ratio depending on solvent content / % age. |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H564 | Polyester Resin containing 100% Resin | 1 kg | 1. Phthalic Anhydride | 0.303 kg |
| 2. Diethylene Glycol | 0.358 kg |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H565 | Polyurethane Resin containing 100% Resin | 1 kg | 1. Polypropylene Glycol | 0.213 kg |
| 2. Diethylene Glycol | 0.015 kg |
| 3. Diphenyl Methane 4,4, Diisocyanate | 0.348 kg |
| 4. Toluene Di isocyanate | 0.199 kg |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H566 | Prepared Adhesives Based on Plastics (Two component laminating adhesives)
(A) Adhesive (Polyurethane Resin containing 100% Resin)
(B) Additive (Polyester Resin containing 100% Resin) | 1 kg | 1. Polypropylene Glycol | 0.213 kg |
| 2. Diethylene Glycol | 0.015 kg |
| 3. Diphenyl Methane 4,4, Diisocyanate | 0.348 kg |
| 4. Toluene Di isocyanate | 0.199 kg |
| 5. Phthalic Anhydride | 0.303 kg |
| 6. Diethylene Glycol | 0.358 kg |
| N.B. The item 1 to 4 is for 1 kg weight of Product A (Adhesive) and item 5 to 6 are for 1 kg weight of Product B (Additive). |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H567 | Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent (General Purpose) | 1 kg | 1. Adipic Acid | 0.221 kg |
| 2. Phthalic Anhydride | 0.243 kg |
| 3. Monoethylene Glycol | 0.216 kg |
| 4. Toluene Di-Isocyanate | 0.016 kg |
| 5. Ethyl Acetate/Methyl Ethyl Ketone (relevant) | 0.400 kg |
| Note: For different %age of Resin Content, the requirement of import item No. 1 to 4 may be worked on pro-rata basis. For item No. 5 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / percentage. |
| EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent (Ultrahigh Performance– Chemical) | 1 kg | 1. Adipic Acid | 0.124 kg |
| 2. Isophthalic Acid | 0.183 kg |
| 3. Diethylene Glycol | 0.212 kg |
| 4. Monoethylene Glycol | 0.030 kg |
| 5. Toluene Di-Iso Cyanate | 0.122 kg |
| 6. Ethyl Acetate/Methyl Ethyl Ketone (relevant) | 0.400 kg |
| Note: For different %age of Resin Content, the requirement of import item No. 1 to 5 may be worked on pro-rata basis. For item No. 6 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / %age. |
| EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent Ultrahigh Performance– Thermal) | 1 kg | 1. Adipic Acid | 0.113 kg |
| 2. Isophthalic Acid | 0.159 kg |
| 3. Diethylene Glycol | 0.187 kg |
| 4. Monoethylene Glycol | 0.030 kg |
| 5. Diphenyl Methane 4,4 Di Isocyanate (MDI) | 0.173 kg |
| 6. Ethyl Acetate/Methyl Ethyl Ketone (relevant) | 0.400 kg |
| Note: For different %age of Resin Content, the requirement of import item No. 1 to 5 may be worked on pro-rata basis. For item No. 6 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / %age. |
| Sl. No. | EXPORT ITEM | QTY | IMPORT ITEM | QTY |
| H568 | Phenol Formaldehyde Resin Solid/Lumps (100% Resin) | 1 kg | 1. Phenol | 1.00 Kg. |
| 2. Paraformaldehyde Powder/flakes | 0.28 Kg. |
Presented by eximkey.com