Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl. No.A-3305, new entries at Sl. No. A-3306 to A-3317 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1954, new entries at Sl.No.C-1955 to C-1966 shall be added as per Annexure “C” to this Public Notice.
After the existing entry at Sl.No.H-543, new entry at Sl.No.H-544 shall be added as per Annexure “D” to this Public Notice.
After the existing entry at Sl.No.K-166, new entry at Sl.No.K-167 shall be added as per Annexure “E” to this Public Notice.
5. This issues in public interest.
Sl.No. | Page No. | Reference | Amendments/Corrections |
---|
1 | 2 | 3 | 4 |
---|
1. | 142 | Chemical & Allied Product Sl.No.A1030 | Quantity of import item at Sl. No. 1, (without any other change) shall be amended to read as under:- |
1. Coal | 0.22 MT/MT |
OR
Petroleum Coke (Minimum Sulphur Content 4% and fixed Carbon below 80%) | 0.143 MT/MT” |
2. | 145 | Chemical & Allied Product Sl.No.A1050 | Quantity of import item at Sl. No. 1, (without any other change) shall be amended to read as under:- |
1. Coal | 0.22 MT/MT |
OR
Petroleum Coke (Minimum Sulphur Content 4% and fixed Carbon below 80%) | 0.143 MT/MT” |
3. | 148 | Chemical & Allied Product Sl.No.A1085 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1085 | Calcium Octoate 10% (Calcium content:10%) | 1 kg | 1. Octoic Acid | 0.445 kg |
Note : Where the calcium content is less than 10% the entitlement of octoic Acid shall be reduced proportionately. |
4. | 148 | Chemical & Allied Product Sl.No.A1095 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A1095 | Cobalt Octoate 12% (Cobalt Content : 12%) | 1 kg | 1. Cobalt Metal | 0.123 kg |
2. Octoic Acid | 0.645 kg |
Note : Where the cobalt content in the export item is less than 12% the entitlement of the above materials shall be reduced proportionately. |
5. | 4 | Chemical & Allied Product Sl.No.A1275 (amended vide Public Notice No.20 Dated:01/08/2003) | Quantity of import items at Sl. Nos. 6 & 7, (with any change) shall be enhanced to read as under:- |
“6. Isodecanol | 0.013 kg |
7. 150 Solvent Neutral | 0.414 kg” |
6. | 228 | Chemical & Allied Product Sl.No.A1778 | The description of export item shall be amended to read as under:-
“Compatible Black Toner for Laser Printer/ Photocopier (other than Bueno Toner) and Xerox 1025” |
7. | 243 | Chemical & Allied Product Sl.No.A1889 | 1. After import item at Sl. No. 3, the following import items (with quantity) shall be added:- |
“4. RDO/FO | 1.370 kg |
5. LDO | 0.06 kg” |
2. The footnote below this entry shall be added:-
“Note: CIF value of item 4 & 5 together shall not exceed 6% of FOB value.” |
8. | 6 | Chemicals & Allied Products Sl.No.A2026 (Notified vide Public Notice No.20 Dated:01/08/2003) | Quantity of import item at Sl. No. 1, the alternative import item “Cane Sugar’s quanitty” shall be amended to read as under:-“ 1.36 kg instead of 1.1 kg” |
9. | 290 | Chemicals & Allied Products Sl.No.A2272 | The following foot note below this entry shall be added:-
“Note : Where the Lead content in the export item is less than 36%, the entitlement of the above raw materials shall be reduced proportionately” |
10. | 310 | Chemical & Allied Product Sl.No.A2420 | The description of import item at Sl. No. 2, (without any change in quantity) shall be amended to read as under:-
“Relevant Aromatic Hydrocarbon Solvent” |
11. | 333 | Chemical & Allied Product Sl.No.A2609 | Quantity of import item at Sl. No. 1, (without any change) shall be amended to read as under:-
“0.64 kg instead of 0.70 kg” |
12. | 361 | Chemicals & Allied Products Sl.No.A2862 | After the description of import item at Sl. No. 1, the following additional import items (with quantity) shall be added:- |
“2. Bromine | 0.686 kg/ kg |
3. Hydrogen Peroxide (50%) | 0.289 kg/kg of the export product |
4. Chlorinated Aromatic Solvent | 0.100 kg/kg of the export product” |
13. | 362 | Chemical & Allied Product Sl.No.A2870 | The description of import item at Sl. No. 3, (without any change in quantity) shall be amended to read as under:-
“Relevant Aromatic Hydrocarbon Solvent” |
14. | 363 | Chemical & Allied Product Sl.No.A2874 | The description of import item at Sl. No. 4, (without any change in quantity) shall be amended to read as under:-
“Relevant Aromatic Hydrocarbon Solvent” |
15. | 18 | Chemical & Allied Product Sl.No.A3016 (amended vide Public Notice No. 27 Dated:01/08/2002) | After the description of import item at Sl. No.6, the following import items (with quantity) shall be added:- |
“7. Formers relevant to the export product | 0.251 kg |
8. Packing Material (Paper and Paper Board, LDPE/HDPE/PP) | As per Packing Policy” |
16. | 33 | Chemical & Allied Product Sl.No.A3038 (Notified vide Public Notice No. 44 Dated:18.10.2002) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A3038 | Methyl Phenidone ( 1 Phenyl-4-Methyl-3-Pyrazolidine | 1 kg | 1. Phenyl Hydrazine | 1.10 kg |
OR
1.a) Aniline | 1.04 kg |
1.b) Sodium Nitrite | 0.83 kg |
2. Isopropyl Alcohol | 1.00 kg |
3. Methyl Methacrylate | 1.00 kg |
17. | 36 | Chemical & Allied Product Sl.No.A3166 (amended vide Public Notice No.03 Dated:31.03.2003) | The description of import items at Sl. Nos. 1 & 2, (without any change in quantity) shall be amended to read as under:-
“1. 2,5-Difluoro Methoxy-2 Mercapto-1 H-Benzimidazole
2.2-Chloromethyl-3,4-Dimethoxy Pyridine HCL” |
18. | 19 | Chemical & Allied Product Sl.No.A3238 (Notified vide Public Notice No. 23 Dated:10.09.2003) | Quantity of import items at Sl. No. 1 & 2, shall be revised without any change to read as udder:-
“1. 0.409 kg 2. 0.395 kg” |
19. | 18 | Chemical & Allied Product Sl.No.A3275 (Notified vide Public Notice No. 38 Dated:09.01.2004) | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
A3275 | Indoxacarb 14.5% SC | 1 kg | 1. Indoxacarb Technical | 0.280 kg |
2. Soprophor BSU | 0.060 kg |
3. Soprophor 3 D 3 3 | 0.090 kg |
4. Methyl Soyate | 0.598 kg |
20. | 20 | Chemical & Allied Product Sl.No.A3286 (Notified vide Public Notice No.38 Dated:09.01.2004) | The description of import item at SL. No. 1, (without any change in quantity) shall be amended to read as under:-
“U.V. Flush Colour-various colours (Min.30% +/- 1% pigment and Min. 60% +/- 2% Polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate” |
21. | 23 | Chemical & Allied Product Sl.No.A3289 (Notified vide Public Notice No.38 Dated:09.01.2004) | The description of import item at SL. No. 1, (without any change in quantity) shall be amended to read as under:-
1. “U.V. Flush Colour-Yellow (Min.30% +/- 1% pigment and Min. 60% +/- 2% Polyester Acrylate /Urethane Acrylate/Acrylic Acrylate/ Epoxy Acrylate)” |
22. | 4 | Engineering Product Sl.No.C7 (notified vide Public Notice No. 35 Dated:05/12/2003) | 1. After the description of import item at Sl. No. 3, the following import item (with quantity) shall be added:- |
“4. Galvanized High Carbon Steel wire” | 1.02 kg/kg |
2. The foot note below this entry shall be added:-
Note: The above item at Sl. No. 4 is allowed as an alternate item to item No. 2 & 3. |
23. | 5 | Engineering Product Sl.No.C1382 (amended vide Public Notice No. 35 Dated:05.12.2003) | 1. The description of export item shall be amend to read as under:-
“Armoured / Un-armoured PVC Insulated Submersible/ Flexible/ Control/ Power purpose Copper Cable rating upto 1100 volts, not elsewhere specified”
2. The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Copper Cathode/Wire Rod/Wire Bar” |
24. | 6 | Engineering Product Sl.No.C1392 (amended vide Public Notice No. 35 Dated:05/12/2003) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Continuous Cast Copper Rod/ Cathodes/ Wire Bars/ Wire Rod (EC Grade)” |
25. | 797 | Engineering Product Sl.No.C1480 | Quantity of import items at Sl. Nos. 16 & 17, shall be amended to read as under:-
“16. 1.05 Kg./Kg. content in export product
17. 1.05 Kg./Kg. content in export product” |
26. | | Engineering Product Sl.No.C1708 (amended vide Public Notice No. 10 Dated:30.05.2003) | After the import item at Sl. No. 7, the following additional import item (with quantity) shall be added:- |
“8. Stainless Steel Plates/Sheets | 1.05 kg/kg content in the export product” |
27. | 869 | Engineering Product Sl.No.C1737 | The norm covered by this entry shall be deleted. |
28. | 869 | Engineering Product Sl.No.C1738 | The norm covered by this entry shall be deleted. |
29. | 28-29 | Engineering Product Sl.No.C1757 (amended vide Public Notice No. 44 Dated:18.10.2002) | 1. The description of import item at Sl. No. 1, the following alternative import item (with quantity) shall be added:- |
“OR
Relevant Zinc Alloy | 1.03 kg/kg content in export product” |
2. After import item at Sl. No. 14, the following additional import item (with quantity) shall be added:- |
“15. Zinc Oxide | 1.015 kg/kg content in export product” |
30. | 22-23 | Engineering Product Sl.No.C1809 (amended vide Public Notice No. 37 Dated:03.10.2002) | 1. The description of export item shall be amended to read as under:-
“Zinc Builders Hardware Lacquered/ Powder Coated (T/C Pressure Die Cast & Zinc Alloy conforming to Z-3/Z-5 specification)” |
2. The description of import item at Sl. No. 1, shall be substituted to read as under:- |
“1. Zinc Ingot | 1.12 kg/kg content in export product |
OR |
Relevant Zinc Alloy | 1.10 kg/kg content in export product” |
31. | 20-21 | Engineering Product Sl.No.C1931 (amended vide Public Notice No. 31 Dated:05/11/2003) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Continuous Cast Copper Rod/ Cathodes/ Wire Bars/ Wire Rod (EC Grade)/Tape” |
32. | 9 | Food Products Sl.No.E-38 (amended vide Public Notice No.10 Dated:30.05.2003) | The description of export item shall be amended to read as under:-
“Rice/Wheat/Maize” |
33. | 988 | Plastic Products Sl.No.H-153 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
H-153 | Non Pyrogenic Sterile Intravenous Infusion Set/ Blood Collection Set | 1 No. | 1. Relevant HDPE/PP/ HMHPE/ LDPE | 1.05 kg/kg content in the export product |
2. PVC Compound Granules | 1.05 kg/kg content in the export product |
3. (i) Relevant Needle | 102/100 Nos. content in the export product |
OR
(ii) Stainless Steel Cannula of Relevant length and dia | 105/100 Nos. content in the export product |
OR
(iii) Stainless Steel Capillary Tube. | 4.4 Mtrs/100 Nos. content in the export product |
4. Relevant Luer Adapter | 102/100 Nos. content in the export product |
5. Relevant Safety Shield/ Security protector | 102/100 Nos. content in the export product |
6. Relevant LDPE Soft Film /PVC Rigid sheet | 72 gms /100 Nos. content in the export product |
7. Relevant Medical Kraft paper | 33 gms/100 Nos. content in the export product |
34. | 1000 | Plastic Products Sl.No.H-241 | The norm covered by this entry shall be substituted by the following:- |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
H-241 | PP Woven Sacks with / without liner | 1 No. | 1. PP Granules | 1.10 kgs/kg content in export |
2. Plastic Material Used for liner | 1.05 kgs/kg content in export |
35. | 1076 | Textile Products Sl. No. J-49 | 1. The description of export product shall be amended to read as under:-
“Grey/Dyed and / or Printed Fabrics/ Made-ups (including quilted made ups) made from relevant man made fibres or yarns”
2. The description of the import item at Sl. No. 1, (with quantity) shall be amended to read as under:- |
“1. Relevant Man Made Fibre | 1.15 kg/kg content of the import item in the export product |
OR
Relevant Man Made Yarn | 1.05 kg/kg content of the import item in the export product” |
3. After the import item at Sl. No. 8, the following import item (with quantity) shall be added:- |
“9. Raw Polyfill | 1.02 kg/kg content in the export product” |
36. | 1142-1143 | Miscellaneous Products Sl.No.K-138 | 1. The description of export item shall be amended to read as under:-
“Gold/ Platinum printed, Decalcomania Transfer ( vitrifible 60x90 cms)”
2. In the description of import item at Sl. No. 5, the alternative import item (without any quantity) shall be added:-
“OR
Ceramic Platinum Paste 12% (depending on the usage in the export product” |
Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
---|
C1955 | Cupro Nickel Tubes | 1 kg | 1. Cupro Nickel Spining, Turnings Boring Scrap of relevant compositions | 1.09 Kg. |
C1956 | High Chrome Castings & Grinding Media Balls for iron ore grinding mills | 1 MT | 1. a) High Carbon Ferro Chrome | 0.847 Kg./Kg. Cr content in export product |
b) Low Carbon Ferro Chrome (including Nitrogen bearing LC FeCr not exceeding 20% of total quantity) | 0.847 Kg./Kg. Cr content in export product |
2. Unwrought Nickel | 1.02 Kg./Kg. Ni content in export product |
3. Ferro Molybdenum | 1.40 Kg./Kg. Mo content in export product |
4. Carbon Steel Melting Scrap | 1.122 Kg./Kg. Fe content in export product-(O.357 x Quantity of HC & LC Ferro Chrome allowed under S.No.1)-0.280 x quantity of Ferro Molybdenum allowed under S.No.3) |
5. Ceramic Grains (for High Chrome Castings only) | 4% of FOB price |
6. Grinding Wheels (for High Chrome Castings only) | 2% of FOB price |
C1957 | LPG Regulator/ Coupling in CKD/Assembled Condition | 1 No. | 1. Relevant Zinc Alloy | 1.03 Kg./ Kg. content in export product |
C1958 | Disposable Cylinder | 1 No. | 1. CRCA Prime Cold Rolled Steel/in Sheet/coil (1 mm to 3 mm thick) | 1.24 Kg./Kg. content in the export product |
2. Non Alloy Steel Wire Rod | 1.02 Kg./Kg. content in the export product |
3. Welding Rods | 1% of the weight of the Steel to be welded |
4. Paints/Primer | Value to be restricted within 2% of the FOB value |
5. Safety Relief Disk | 1 No. |
6. Freon Valve | 1 No. |
C1959 | Pressure Die Cast/ Sand cast components/ articles made of Alloy Steel. | 1 kg | 1. Relevant Aluminum Alloy Ingots | 1. 1.06 kg/kg content in export product |
C1960 | Lead Alloy in the form of :Bar/ Anode/ Ingot/ Slab/ Pigs | 1 kg | 1. Lead Ingot | 1.02 kg/kg content in the export product |
OR
1. Lead Scrap | 1.06 kg/kg content in the export product |
2. Tin Ingot | 1.02 kg/kg content in the export product |
OR
2. Tin Scrap | 1.06 kg/kg content in the export product |
3. Antimony Ingot | 1.02 kg/kg content in the export product |
OR
3. Antimony Scrap | 1.06 kg/kg content in the export product |
4. Copper Ingot | 1.02 kg/kg content in the export product |
OR
Copper Scrap | 1.06 kg/kg content in the export product |
4. Bismuth Ingot | 1.02 kg/kg content in the export product |
OR
Bismuth Scrap | 1.06 kg/kg content in the export product |
5. Zinc Ingot | 1.02 kg/kg content in the export product |
OR
Zinc Scrap | 1.06 kg/kg content in the export product |
6. Cadmium Ingot | 1.02 kg/kg content in the export product |
OR
Cadmium Scrap | 1.06 kg/kg content in the export product |
C1961 | Bismuth Alloy in the form of :Rod/Wire/ Strips/ Sheet/ Foil/ Preforms/ Section/ Tube | 1 kg | 1. Bismuth Ingot | 1.03 kg/kg content in the export product |
OR
1. Bismuth Scrap | 1.07 kg/kg content in the export product |
2. Tin Ingot | 1.03 kg/kg content in the export product |
OR
2. Tin Scrap | 1.07 kg/kg content in the export product |
3. Lead Ingot | 1.03 kg/kg content in the export product |
OR
3. Lead Scrap | 1.07 kg/kg content in the export product |
4. Antimony Ingot | 1.03 kg/kg content in the export product |
OR
4. Antimony Scrap | 1.07 kg/kg content in the export product |
4. Copper Ingot | 1.03 kg/kg content in the export product |
OR
4. Copper Scrap | 1.07 kg/kg content in the export product |
5. Zinc Ingot | 1.03 kg/kg content in the export product |
OR
5. Zinc Scrap | 1.07 kg/kg content in the export product |
6. Cadmium Ingot | 1.03 kg/kg content in the export product |
OR
6. Cadmium Scrap | 1.07 kg/kg content in the export product |
C1962 | Lead Alloy in the form of: Rod/ Wire/ Sheet /Foils/ Reforms/ Sections/ Tube | 1 kg | 1. Lead Ingot | 1.03 kg/kg content in the export product |
OR
1. Lead Scrap | 1.07 kg/kg content in the export product |
2. Tin ingot | 1.03 kg/kg content in the export product |
OR
2. Tin Scrap | 1.07 kg/kg content in the export product |
3. Antimony Ingot | 1.03 kg/kg content in the export product |
OR
3. Antimony Scrap | 1.07 kg/kg content in the export product |
4. Copper Ingot | 1.03 kg/kg content in the export product |
OR
4. Copper Scrap | 1.07 kg/kg content in the export product |
5. Bismuth Ingot | 1.03 kg/kg content in the export product |
OR
5. Bismuth Scrap | 1.07 kg/kg content in the export product |
6. Zinc Ingot | 1.03 kg/kg content in the export product |
OR
6. Zinc Scrap | 1.07 kg/kg content in the export product |
7. Cadmium Ingot | 1.03 kg/kg content in the export product |
OR
7. Cadmium Scrap | 1.07 kg/kg content in the export product |
C1963 | Cadmium Alloy in the form of :Bar/ Anode/ Ingot/ Slab/Pigs | 1 kg | 1. Cadmium Ingot | 1.02 kg/kg content in the export product |
OR
1. Cadmium Scrap | 1.06 kg/kg content in the export product |
2. Tin ingot | 1.02 kg/kg content in the export product |
OR
2. Tin Scrap | 1.06 kg/kg content in the export product |
3. Lead Ingot | 1.02 kg/kg content in the export product |
OR
3. Lead Scrap | 1.06 kg/kg content in the export product |
4. Antimony Ingot | 1.02 kg/kg content in the export product |
OR
4. Antimony Scrap | 1.06 kg/kg content in the export product |
5. Copper Ingot | 1.02 kg/kg content in the export product |
OR
5. Copper Scrap | 1.06 kg/kg content in the export product |
6. Bismuth Ingot | 1.02 kg/kg content in the export product |
OR
6. Bismuth Scrap | 1.06 kg/kg content in the export product |
7. Zinc Ingot | 1.02 kg/kg content in the export product |
OR
7. Zinc Scrap | 1.06 kg/kg content in the export product |
C1964 | Cadmium Alloy in the form of : Rod/ Wire/Strip/ Sheet/ Foil/ Preforms/Sections/ Tube | 1 kg | 1. Cadmium Ingot | 1.03 kg/kg content in the export product |
OR
1. Cadmium Scrap | 1.07 kg/kg content in the export product |
2. Tin Ingot | 1.03 kg/kg content in the export product |
OR
2. Tin Scrap | 1.07 kg/kg content in the export product |
3. Lead Ingot | 1.03 kg/kg content in the export product |
OR
3. Lead Scrap | 1.07 kg/kg content in the export product |
4. Antimony Ingot | 1.03 kg/kg content in the export product |
OR
4. Antimony Scrap | 1.07 kg/kg content in the export product |
5. Copper Ingot | 1.03 kg/kg content in the export product |
OR
5. Copper Scrap | 1.07 kg/kg content in the export product |
6. Bismuth Ingot | 1.03 kg/kg content in the export product |
OR
6. Bismuth Scrap | 1.07 kg/kg content in the export product |
7. Zinc Ingot | 1.03 kg/kg content in the export product |
OR
7. Zinc Scrap | 1.07 kg/kg content in the export product |
C1965 | Tin Alloy in the form of : Rod/Wire/ Strip/ Sheet/Foil/Preforms/ Section/ Tube | 1 kg | 1. Tin Ingot | 1.03 kg/kg content in the export product |
OR
1. Tin Scrap | 1.07 kg/kg content in the export product |
2. Lead Ingot | 1.03 kg/kg content in the export product |
OR
2. Lead Scrap | 1.07 kg/kg content in the export product |
3. Antimony Ingot | 1.03 kg/kg content in the export product |
OR
3. Antimony Scrap | 1.07 kg/kg content in the export product |
4. Copper Ingot | 1.03 kg/kg content in the export product |
OR
4. Copper Scrap | 1.07 kg/kg content in the export product |
5. Bismuth Ingot | 1.03 kg/kg content in the export product |
OR
5. Bismuth Scrap | 1.07 kg/kg content in the export product |
6. Zinc Ingot | 1.03 kg/kg content in the export product |
OR
6. Zinc Scrap | 1.07 kg/kg content in the export product |
6. Cadmium Ingot | 1.03 kg/kg content in the export product |
OR
6. Cadmium Scrap | 1.07 kg/kg content in the export product |
C1966 | Bismuth Alloy in the form of : Bar/Anode/ Ingot/Slab/Pigs | 1 kg | 1. Bismuth Ingot | 1.02 kg/kg content in the export product |
OR
1. Bismuth Scrap | 1.06 kg/kg content in the export product |
2. Tin Ingot | 1.02 kg/kg content in the export product |
OR
2. Tin Scrap | 1.06 kg/kg content in the export product |
3. Lead Ingot | 1.02 kg/kg content in the export product |
OR
3. Lead Scrap | 1.06 kg/kg content in the export product |
4. Antimony Ingot | 1.02 kg/kg content in the export product |
OR
4. Antimony Scrap | 1.06 kg/kg content in the export product |
5. Copper Ingot | 1.02 kg/kg content in the export product |
OR
5. Copper Scrap | 1.06 kg/kg content in the export product |
6. Zinc Ingot | 1.02 kg/kg content in the export product |
OR
6. Zinc Scrap | 1.06 kg/kg content in the export product |
7. Cadmium Ingot | 1.02 kg/kg content in the export product |
OR
7. Cadmium Scrap | 1.06 kg/kg content in the export product |