Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

PUBLIC NOTICE NO. 55(RE-03), DT. 03/03/2004

Amendments/deletions/corrections and additions in SION

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl. No.A-3300, new entries at Sl. No. A-3301 to A-3305 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1948, new entries at Sl.No.C-1949 to C-1954 shall be added as per Annexure “C” to this Public Notice.

MISCELLANEOUS PRODUCTS
After the existing entry at Sl.No.K-163, new entries at Sl.No. K-164 to K-166 shall be added as per Annexure “D” to this Public Notice.

5. This issues in public interest.

Sd/-
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE

(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

(F. No. 01/87/44/00001/AM-04/DES-VIII)

Annexure “A” to the
Public Notice No. 55
Dated: 03/03/2004

AMENDMENTS/CORRECTIONS

Sl.No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	3	Chemicals & Allied Products Sl.No.A1170 (Notified vide Public Notice No. 20 Dated:01/07/2002)	After the description of import item at Sl. No. 2, the following additional import items (with quantity) shall be added:-
			“3. Limestone	0.137 kg
			4. Ammonia	0.003 kg
			5. Corrosion Inhibitor	0.003 kg
			6. Chemical for Treatment of Boiler Water, Process Water and Cooling Water	0.010 kg
Note : CIF value of items 4, 5, & 6 together shall not exceed 5% of FOB value.
2.	169	Chemical & Allied Product Sl.No.A1381	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1381	Malic Acid	1 kg	1. Crude Furmaric Acid (Purity 90%)	1.17 kg.
3.	5	Chemicals & Allied Products Sl.No.A1939 (Notified vide Public Notice No. 15 Dated:07/07/2003)	The quantity of import item at Sl. No. 1 “Alpha Pinene” shall be amended to read as under:-“1.44 kg”
4.	329	Chemicals & Allied Products Sl.No.A2573	After the description of import item at Sl. No. 1, the following additional import items (with quantity) shall be added:-
			“2. Ethyl Cyano Acetate	1.26 kg/kg
			3. Sodium Cyanide	0.33 kg/kg
			4. Toluene	0.50 kg/kg”
5.	358	Chemical & Allied Product Sl.No.A2813	The norm covered by this entry shall be suspended.
6.	16	Chemical & Allied Product Sl.No.A3257 (Notified vide Public Notice No.31 Dated:05.11.2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3257	Bleaching Earth	1 kg	1. Bentonite	1.05 Kg
			2. Hydrated Lime(Purity 80-85%)	0.506 Kg
			3. Sulphuric Acid (Purity 75%)	0.976 Kg
Note : Import of Fuel may be allowed as per Policy-General note for Fuel in the Handbook
7.	479	Engineering Product Sl.No.C3	The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:-
			“1. Aluminium Scrap	1.03 kg
			OR Aluminium Ingot	1.01 kg”
8.	14	Engineering Product Sl.No.C27 (amended vide Public Notice No.03 Dated:31.03.2003)	The description of export item shall be amended to read as under:- “Aluminium Cast articles including parts & Components”
9.	513	Engineering Product Sl.No.C203	The additional import item at Sl. No. 4, (with quantity) shall be added:-
			“4. Plastic Components	Net to net
			OR Relevant Plastic Material	1.05 kg/kg content in export product”
10.	15	Engineering Product Sl.No.C220 (amended vide Public Notice No. 44 Dated:18.10.2002)	1. The description of export product shall be amended to read as under:- “Galvanised Transmission Line/Telecom Towers & Parts thereof” 2. The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“High Tensile or Mild Steel Angles Plates/Sheets/Wide Coils”
11.	4	Engineering Product Sl.No.C371(amended vide Public Notice No. 06 Dated:08/05/2003)	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”
12.	631	Engineering Product Sl.No.C641	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“MS HR/CR Plates/Sheets/Strips/Wide Coils of relevant type”
13.	10-11	Engineering Product Sl.No.C667 (amended vide Public Notice No. 06 Dated:08/05/2003)	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”
14.	11-12	Engineering Product Sl.No.C668 (amended vide Public Notice No. 06 Dated:08/05/2003)	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”
15.	12	Engineering Product Sl.No.C669 (amended vide Public Notice No. 06 Dated:08/05/2003)	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”
16.	13	Engineering Product Sl.No.C670 (amended vide Public Notice No. 06 Dated:08/05/2003)	The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”
17.	710-713	Engineering Product Sl.No.C1062	After the import items at Sl. No. 112, the following additional inputs (with quantity) shall be added:-
			113. 24V Starter Motor	1 No.
			114. CDS Steel Tubes for Injector Pipes	3.2 Mtrs.
			115. Oil Pipe Support	1 No.
			116. Gasket	1 No.
			117. Grooved Stud	1 No.
			118. Pressure Piece	6 Nos.
			119. Element Cigar Lighter	1 No.
			120. Ring Cigar Lighter	1 No.
			121. Base Cigar Lighter	1 No.
			122. Ash Tray(F7872760)	1 No.
			123. Glove Box Lid	1 No.
			124. Handle Assist RH	1 No.
			125. Handle Assist LH	1 No.
			126. Lever with Bush & Support	1 No.
			127. Lead	17.105 Kg.
			128. GM Separators	110 Nos.
			129. Antimony	0.231 Kg.
			130. Polypropeiene	1.79 Kg.
			131. Polymethyle Methacrylite Moulding Powder-Red	0.132 Kg.
			132. Polymethyle Methacrylite Moulding Powder-Amber	0.0525 Kg.
			133. Torsion Bar	1 No.
			134. Poppet	1 No.
			135. Ball Return Guide LH	2 Nos.
			136. Roller Bearings/Shaft	2 Nos.
			137. Thrust Washer	2 Nos.
			138. Seal Nut 3/8”	1 No.
			139. Seal Nut 5/8”	1 No.
			140. Slip Seal V/Hsg	1 No.
			141. Needle Roller	2 Nos.
			142. Needle Thrust Bearing	1 No.
			143. Seal Ring	2 Nos.
			144. Seal Ring Valve	1 No.
			145. Seal Valve Hsg (Dirt Seal)	1 No.
			146. O Ring	2 Nos.
			147. O Ring Valve	2 Nos.
			148. O Ring V/Hsg Slipper Seal	1 No.
			149. O Ring R Piston	1 No.
			150. O Ring V/Hsg	1 No.
			151. Special Bolt 9/16”	6 Nos.
			152. Seal Ring S/Shaft	1 No.
			153. Seal Ring R/P	1 No.
			154. Seal Ring S/Shaft Hsg	1 No.
			155. Backup Washer	1 No.
			156. Gasket S/Cover	1 No.
			157. Retaining Ring (INT)	2 Nos.
			158. Trunion Seal	1 No.
			159. Seal S/Cover	1 No.
			160. Back Up Washer S/Shaft	1 No.
			161. Molecular Sleeve (Desiccant)	1.4 Kg.
			162. Flexible Arm	1 No.
			163. Compressor Wheel MDC	1 No.
			164. Hollow screw	2 Nos.
			165. Gasket Ring	2 Nos.
			166. Socket Head Bolt	3 Nos.
			167. Segment TS	3 Nos.
			168. Boost Pressure Pipe	1 No.
			169. Control Valve	1 No.
			170. Heat Shield	1 No.
			171. Turbine Wheel Assy	1 No.
			172. Flinger Sleeve	1 No.
			173. Steel O Ring	1 No.
			174. Segment CS	3 Nos.
			175. Bolt Hex	6 Nos.
176. Journal	2 Nos.
177. Snap Ring	4 Nos.
178. Piston Ring	3 Nos.
179. Thrust Ring	1 No.
180. Thrust Plate	1 No.
181. Oil Deflector	1 No.
182. Plastic O Ring	1 No.
183. Socket Head Bolt	4 Nos.
184. Washer	4 Nos.
185. Shaft Nut	1 No.
186. Rubber Sleeves	1 No.
187. Copper Was Mix	0.003 Kg.
188. Styrene Butadiene Rubber 1502	0.23 Kg.
189. Styrene Butadiene Rubber 1712	0.29 Kg.
190. Tyre Cord Fabric 25/1680	2.52 Kg.
191. Rubber Chemical	0.25 Kg.
192. Polyvinyl Butyral Sheets	1.6512 Msqr.
193. Green Float Glass	2.8198 Msqr.
18.	721	Engineering Product Sl.No.C1077	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1077	Hose Assembly having different lengths	1 Mtr.	1. Hydraulic Brake Hose of relevant dia and material	1.02 Meter/ Meter content of export product
19.	757	Engineering Product Sl.No.C1294	Quantity of import item at Sl. No. 1, shall be amended to read as under:-“1.20 kg/kg content in the export product”
20.	757	Engineering Product Sl.No.C1299	1. The description of export item shall be amended to read as under:-“Band Saw Segments/Band Saw in Coil made from Carbon Steel/Bimetal Steel”2. The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-“Relevant CR Steel Strip/Wide Coil”
21.	769 - 770	Engineering Product Sl.No.C1356	The norm covered by this entry shall be deleted.
22.	770 - 771	Engineering Product Sl.No.C1357	The norm covered by this entry shall be deleted.
23.	789	Engineering Product Sl.No.C1420	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under :-“1. Cobalt granules/ briquettes/ Cathodes”
24.	25	Engineering Product Sl.No.C1613 (amended vide Public Notice No. 44 Dated:18.10.2002)	After the import item at Sl. No. 7, the following import item (with quantity) shall be added :-
24.	25		“8. Grinding Wheel for edge honing and Ultra Graphite Coat	restricted to 3% of FOB value”
25.	837-838	Engineering Product Sl.No.C1627	1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under :- “1. Copper Scrap OR Copper Cathodes” 2. The description of import item at Sl. No. 3 (without any change in quantity) shall be amended to read as under :- “Nickel Shots / Pellets/Ingots/Cathodes”
26.	9	Engineering Product Sl.No.C1708 (amended vide Public Notice No. 10 dt.30.05.2003)	After the import item at Sl. No. 7, the following additional import items (with quantity) shall be added:-
			“8. Mild Steel Universal Column	1.05 kg/kg content
			9. Arsenic Pentaoxide	0.7063 kg/M³ of Plywood used
			10. Cabosil/ Fumed Silica	Upto 2% of the quantity of isopthalic Polyester Resin used
			11. Foam Core Resin	Upto 2% of the quantity of glass roving / chopped strand mat/ surface mat/ woven roving used”
27.	33	Engineering Product Sl.No.C1898 (notified vide Public Notice No. 15 Dated:07/07/2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1898	Forged Safty relief Valve for LPG Cylinder made of brass	1 No.	1. Brass Rod Round	1.23 kg/kg content in the export Product
28.	2	Engineering Product Sl.Nos. (Amended vide Public Notice No. 35 Dated:05.12.2003)	The following Standard Input Output Norms entries at Sl. Nos. corrected to read as under:-“C-1932 to C-1934 instead of C-1930 to 1932”
29.	1092	Textile Products Sl. No. J-137	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “PU/PVC coated Nylon/Polyester Fabric OR Any other relevant fabric”

Annexure “B” to the
Public Notice No. 55
Dated: 03/03/2004

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3301	Sulpho Chlorinated Paraffin (Chlorine content : 26%, sulfur content: 2.27%)”	1 kg	1. Paraffin Wax	0.720 kg.
A3302	Lanolin Anhydrous (Colour: Palo Yellow to Yellow) Acid value : Less than two	1 kg	1. Wool Grease Colour: Light brown to brown Acid Value : 3 to 9	1.410 Kg
A3302		1 kg	2. Isopropyl Alcohol	0.118 Kg
A3303	Ethylene Glycol Mono Ethyl Ether	1 kg	1. Denatured Ethyl Alcohol	1.154 Kg
A3303	Ethylene Glycol Mono Ethyl Ether	1 kg	2. Triethyl Amine Catalyst	0.004 Kg
A3304	Diuron Technical	1 kg	1. Ortho Dichloro Benzene	0.300 Kg.
A3304	Diuron Technical	1 kg	2. 3,4 Dichloro Aniline	0.802 Kg.
A3305	Octyl Hydroxy Stearate	1 kg	1. 2-Hydroxy Stearic Acid	0.838 kg.
A3305	Octyl Hydroxy Stearate	1 kg	2. Ethyl hexanol	0.363 kg.

Annexure “C” to the
Public Notice No. 55
Dated: 03/03/2004

ENGINEERING PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1949	Portable Generator/ Internal Combustion Engine for Portable Generator/Pump Set run on Kerosine & Petrol	1 No.	1. One side Zinc Coated Steel Sheet	1.12 Kg./Kg. content in export product
			2. Terne Sheet	1.12 Kg./Kg. content in export product
			3. CRNGO Silicon electrical steel sheet	1.40 Kg./Kg. content in export product
			4. Electrolytic continuous cast copper rod	1.02 Kg./Kg. content in export product
			5. Hot dipped Aluminium coated Steel Sheet	1.12 Kg./Kg. content in export product
			6. Aluminium Alloy Ingots	1.03 Kg./Kg. content in export product
Note : Components, if required, may be allowed as per General Note No.4 for Engg. Product inserted by Public Notice No.46 dated 6.11.2002
C1950	Anode Slime containing Gold and Silver in Black powder form	1 kg	1. Copper Concentrate (Gold and Silver Content only) Containing Gold and	Gold - 1.015 Kg/Kg content in the export product
C1950	Anode Slime containing Gold and Silver in Black powder form	1 kg	Silver in Blackish Dark Green Powder Form	Silver - 1.085 Kg/Kg content in the export product
Note: 1. The gold and silver content in copper concentrate as declared in the import document is to be accounted for as per the above SION. Note : 2.The above SION is to allow duty exemption for gold and silver only. The copper contained in the concentrate will be cleared by payment of applicable customs duty.
C1951	21 inches Colour Picture Tube (CPT) integrated with Deflection Yoke.	1 No.	1. 21 inches Bare Colour Picture Tube	Net to net
			2. EPS	As per packing policy
			3. Paper (Kraft)	As per packing policy
C1952	Seismic Cable- TypeRSR 3 Cable , double ended, 165 M long	1 No.	1. Thermoplastic Polyurethane	1.05 kg/kg content in the export product
C1953	Hermetically sealed compressor Pump Kit assembly	1 No.	RAW Material:-
			1. Nitrite Rubber coated steel sheet/ wide coil	1.79 kg/kg
			2. Flapper Valve Steel sheet/wide coil	1.18 kg/kg
			3. Relevant Cast iron part castings: a) Crankcase b) Crankshaft c) Outboard Bearing d) Valve plate e) Cylinder Head	1.16 kg/kg of the cast iron part castings
			Components:-
			1. Piston Sintered	1 No. net to net
			2. Connecting Rod	1 No. net to net
			3. Cover Muffler casting	1 No. net to net
			4. Roll Pin	1 No. net to net
			5. Intake valve pin	2 Nos. net to net
			6. Screw Outboard bearing	3 Nos. net to net
			7. Muffler screw	2 Nos. net to net
			8. Screw Cylinder head	4 Nos. net to net
			9. Screw Discharge	2 Nos. net to net
			10. Rivet	2 Nos. net to net
C1954	Tube light ballast 18 watts & 36 watts weighing 451 grams	1 No.	1. Copper Rod	67 grams
			2. Electrical Steel Sheets/Coils Grade 400 & above	358 grams
			3. Contact Pin	2 Nos. on net to net basis
			4. Impregnated Lacquer	4% of FOB value

Annexure “D” to the
Public Notice No. 55
Dated: 03/03/2004

MISCELLANEOUS PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
K164	Handicraft Card Board & Glass Photo-frame (coated with embroidered/ beaded fabric)	1 Piece	1. Relevant fabric	1.20 sq. mtr/ sq. mtr content in the export product
			2. Relevant Card board (other than ivory board and white board) of relevant thickness	1.20 sq. mtr/ sq. mtr content in the export product
			3. Relevant Iron fittings/Glue/Beads/Rayon Thread/ Zari Thread	Upto 5% of the FOB value of exports
K165	Handicraft Cardboard/ beaded fabric box	1 Piece	1. Relevant fabric	1.10 sq. mtr/ sq. mtr content in the export product
			2. Relevant Card board (other than ivory board and white board) of relevant thickness	1.10 sq. mtr/ sq. mtr content in the export product
			3. Relevant Glue/Tassel /Beads	Upto 5% of the FOB value of exports
K166	Hanging Tapestry	1 Piece	1. Relevant fabric	1.02 sq. mtr/ sq. mtr content in the export product

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password