PUBLIC NOTICE NO. 52(RE-03), DT. 26/02/2004

Amendments and Corrections in DEPB Rate Schedule

In exercise of the powers conferred under paragraph 2.4 of the Export and Import Policy, 2002-2007 and paragraph 1.1 of Handbook of Procedures ( Vol.I), the Director General of Foreign Trade hereby makes the following amendment/correction in the Schedule of DEPB rate.

I. The following corrections are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 and these corrections are effective from 9th February, 2004.

Product Group: Engineering Product Code:61

(i) All the DEPB rates relating to Engineering Products notified vide Public Notice No.47 (RE-2003)/2002-2007 dated 9th February, 2004, are substituted as Annexed to this Public Notice.

Product Group: Chemicals Product Code:62

(i) The DEPB rate of Sl. No.326 is corrected to read as 9%.

(ii) The DEPB rate of Sl. No.464 is corrected to read as 6%.

(iii) The DEPB rate of Sl. No.871 is corrected to read as 5%.

Product Group: Plastics Product Code:63

(i) The DEPB rate of Sl. No.2 is corrected to read as 11%.

(ii) The DEPB rate of each of Sl. Nos.33A, 33B, 33C, 33D, 33E & 33F is corrected to read as 12%.

Product Group: Leather Product Code:64

(i) The DEPB rate of each of the Sl. Nos.6,9,12,13 is corrected to read as 7%.

(ii) The DEPB rates of Sl. No.24 is corrected to read as 10%.

Product Group: Textiles Product Code:89

(i) The description of the export product at Sl.No.34A is corrected to read as “Woven Shawls/Scarves/Mufflers and Made-ups made of 100% Wool with or without embroidery”.

(ii) The description of the export product at Sl.No.44A is corrected to read as “ Bleached/Dyed and/or printed manmade-cotton blended fabrics ‘with or without embroidery’ and/or ‘with or without metallised yarn’ (manmade content more than 50% by weight)”.

(iii) The description of the export product at Sl. No.44C is corrected to read as “ Bleached/Dyed and/or Printed Polyester- Cotton Blended Made-ups ( with or without embroidery and/or with or without metallised yarn ( Polyester content more than 50% by weight.)”.

II. The DEPB rate of 13% of Sl. No. 353 of Product Group Engineering (Code No 61) notified vide Public Notice No.46 (RE-03)/2002-2007 dated 4th February, 2004 is corrected to read as 20% with effect from 01.04.2003 till 08.02.2004.

III. The following amendments are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 :-

Product Group: Engineering Product Code:61

(i) The DEPB rate and value cap of Sl.No.410 is amended to read as 13% and Rs.75/- per Kg. respectively.

(ii) The DEPB rate and value cap of Sl.No.411 is amended to read as 11% and Rs.70/- per Kg. respectively.

(iii) The DEPB rate and value cap of Sl.No.412 is amended to read as 11% and Rs.185/- per Kg. respectively.

(iv) The DEPB rate and value cap of Sl.No.530 is amended to read as 13% and Rs.175/- per Kg. respectively.

This issues in the public interest.

( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE

( File NO. 01/83/162/288/AM03/DES.VIII/Vol.IX )

---

Annexure-1

PRODUCT GROUP : ENGINEERING

PRODUCT CODE : 61

S.No.	Export Product	Rounded Off Rates	Value Cap
1	2	3	4
1	All Aluminium Conductors (AAC) bare	9
2	Aluminium Conductors Steel Re-inforced (ACSR)	9
3	Aluminium conduit bodies made of Aluminium and other alloying constituents	7
4	Aluminium Flexible Tubing	7
5	Deleted	0
6	Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of	7
7	Extruded aluminium products including pipe and tubes	7
8	Cast articles including parts/components of Aluminium	7	Rs.125/Kg
9	Rolled Aluminium plates, sheets, strips including corrugated Aluminium sheets/strips	7
10	11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm sq.	11
11	11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq.	11
12	11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq.	11
13	600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq	11
14	600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq.	11
15	600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq.	11
16	600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq.	11
17	600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq.	11
18	600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4x120 Sq.mm	11
19	Electrical Wiring Accessories/Components wholly made of Brass	10	Rs.240/Kg.
20	Complete ceiling fan with metal blades (36"/42 /48 /56 /60 )	5
21	Electric Pedestal Fan	9
22	Electric table fans	9
23	Fluorescent Tubes (18/20 /36/40 Watts)	11
24	Galvanised transmission line towers and parts thereof	10	Rs.45/Kg.
25	GLS Lamps (upto 100 Watts and below)	11
26	H.P.M.V. Lamps (250 W)	11
27	H.P.S.V Lamps (250 W)	11
28	H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)	11
29	H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)	11
30	Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor.	11
31	Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor	11
32	Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor	11
33	Marine Cable flexible Non Burning (TPR) 4 X 1.5	10
34	Marine Cable flexible Non Burning (TPR) 4 X 2.5	10
35	Marine Cable flexible Non Burning (TPR) 12 X 1.5	10
36	Marine Cable flexible Non Burning (TPR) 3 X 4.00	10
37	Marine Cable flexible Non Burning (TPR) 3 X 6.00	10
38	Marine Cable flexible Non Burning(TPR) 2 x 1.5	10
39	Marine Cable flexible Non Burning(TPR) 3 x 1.5	10
40	Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5	10
41	Marine Cable Non Burning for Stationary laying (PVC) 2 X 2.5	10
42	Marine Cable Non Burning for Stationary laying (PVC) 3 X 1.5	10
43	Marine Cable Non Burning for Stationary laying (PVC) 3 X 2.5	10
44	Marine Cable Non Burning for Stationary laying (PVC) 3 X 10.00	10
45	Marine Cable Non Burning for Stationary laying (PVC) 3 X 16.00	10
46	Marine Cable Non Burning for Stationary laying (PVC) 3 X 25.00	10
47	Marine Cable Non Burning for Stationary laying (PVC) 3 X 50.00	10
48	Marine Cable Non Burning for Stationary laying (PVC) 3 X 70.00	10
49	Marine Cable Non Burning for Stationary laying (PVC) 3 X 95.00	10
50	Marine Cable Non Burning for Stationary laying (PVC) 7 X 1.5	10
51	Marine Cable Non Burning for Stationary laying (PVC) 12 x 1.5	10
52	Out door Weather proof light fitting with Glass Shell/ Acrylic cover excluding Automotive light fittings.	9
53	Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC Shroud (with or without ring, lock and nut)	10
54	Single Phase Electrical Energy Meter	10
55	11 KV straight through Joints for XLPE Copper Cable size 3 x 95 Sq. mm.	10
56	Starter Motor Armature for High Speed Vehicles Cars etc.	8
57	Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)	10
58	Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)	10
59	Steel Welding Electrodes	11
60	Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII	5
61	Three Phase Electrical Energy Meter	10
62	Tinned/Untinned copper cables lugs /sockets/ connections	10	Rs.260/Kg
63	Tinned/Untinned copper ferules	10	Rs.260/Kg
64	Tinned/Untinned copper terminals ends	10	Rs.260/Kg.
65	Ferrous Automotive Products	3
66A	Nuts/Bolts/screws/washers made of Alloy steel including stainless steel	10	Rs.60/Kg.
66B	Nuts/Bolts/Screws/washers made of Non-alloy Steel	10	Rs.25/Kg
67A	Bright bars made out of Stainless Steel	13	Rs.90/Kg.
67B	Bright bars made out of Mild Steel	10	Rs.30/Kg
67C	Bright bars made out of items other than Stainless Steel and mild steel	10	Rs.35/Kg.
68A	Carbon Steel/ Non Alloy Steel Forgings (Machined)	13	Rs.105/Kg.
68B	Alloy Steel Forgings (Machined)	13	Rs.175/Kg
68C	Stainless steel forgings (Machined)	13	Rs.400/Kg.
69A	Carbon Steel/Non Alloy Steel Forgings (Rough)	13	Rs.85/Kg.
69B	Alloy Steel Forgings (Rough)	13	Rs.125/Kg
69C	Stainless steel forgings (rough)	13	Rs.300/Kg.
70A	High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Alloy steel/Stainless steel	8	Rs.60/Kg.
70B	High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Non-Alloy steel	8	Rs.25/Kg.
71A	Hot forged nuts of Alloy Steel including Stainless Steel	10	Rs.60/Kg.
71B	Hot forged nuts of Non-Alloy Steel	10	Rs.25/Kg.
72	Cast Iron Products (Rough/Machined) (not elsewhere specified)	8
73	Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or steel	9	Rs.40/Kg.
74	Chisels made of forging quality carbon steel	9
75	Drop forged Pliers of Alloy steel/Non-alloy Steel	9
76	Hand Drill	10
77	High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile)	9
78	Pipe Wrenches	9
79	Punches	9
80	Screw Drivers (Nickel plated)	9
81	Spanners made of alloy/non-alloy steel	9
82	Steel files of Alloy Steel	9
83	Steel files of High Carbon Steel	9
84	Steel Vices	9
85	Cold Rolled Galvanised, Colour coated Non-Alloy steel sheets/ hoops and strips/ wide coils (plain / corrugated)	13	Rs.29000/MT
86	2" Galvanised flanges with rubber gaskets	10
87	2" Galvanised/ Zinc Coated Bungs	10
88	2" Galvanised/Zinc coated Flange	10
89	3/4" Flanges with or without Washer	10
90	3/4" Galvanised bungs with rubber gaskets	10
91	3/4" Galvanised flanges with rubber gaskets	10
92	3/4" Galvanised Zinc coated Bungs	10
93	3/4" Galvanised/ Zinc coated Flanges	10
94	Adjustable Bracket made out of MS sheet	10
95	Wood to steel adapter (All Types)	10
96	Aluminium collapsible tubes	7
97	Aluminium Pencil Sharpner	7
98	Aluminium rivets	9
99	Aluminium Utensils with Interior PTFE Coating & Exterior painted (non-stick) with/ without handle.	4
100	Animal Drawn Ploughs/ Parts thereof	9
101	Arm Blade	11	Rs.20/Kg.
102	Aruvil Double Wheel Carrier kit Set	11
103	Axes	9
104	Ball Chain Cap	8
105	Barb Arm	11
106	Barb Arm Base	9
107	Black Pipes/ tubes including precision Tubes	13	Rs.20/Kg.
108	Bottom/Top Plate UM-1 made of Tin Plate	9
109	Box Hinge	12
110	Brace Band	12
111	Brace Rail End	12
112A	Nuts milled from bar process of Alloy Steel including Stainless Steel	10	Rs.60/Kg.
112B	Nuts milled from bar process of Non-Alloy Steel	10	Rs.25/Kg.
113	Brass Builder Hardware	7	Rs.325/Kg.
114	Brass Tubes	11	Rs.150/Kg.
115	Brass valves	7
116	Bull Dog Hinge	11
117	Seamless Butt Welded Steel Pipe Fittings made from Seamless/ERW Steel Tube	11	Rs.120/Kg.
118	Cl Cistern	8
119	Cl pipes and Fitting, not elsewhere specified	8
120	Coil Spring / Helical Coil Spring	10	Rs.20/Kg.
121	Collar of M.S. Sheet	13
122	Corner Arm	11
123	Crow Bar /Wrecking Bar	11	Rs.35/Kg.
124	Cultivator made of mild steel	9
125	Cut Hand tacks made of M.S. Sheets	9
126	Decorative Handicrafts/ Artwares made of Anodised Aluminium	4
127	Door/ Window/ ventilator Sections made of mild steel	9
128	Double Carrier Wheel	11
129	Drag Link Chain	10
130	Ductile Iron Spun Pipes	9
131	Electrolytic Tinplate components	6
132	Round/Eliptical /Oval Tin Plate container and/ or components thereof	8
133	Deleted
134	Female Hinge	12
135	Flange Plate	12
136	Floor Flange	9
137	Fork	11
138	Fork digging with socket	10
139	Galvanised non alloy Steel Wire Ropes (wire steel core)	9
140	Galvanised non alloy Steel Wire Ropes (fibre core)	9
141	Galvanised Pipes/ tubes with wall thickness above 3mm to 4mm	13	Rs.20/Kg.
142	Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 1mm or below	13	Rs.20/Kg.
143	Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 1mm to 2mm	13	Rs.20/Kg.
144	Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 2mm to 3mm	13	Rs.20/Kg.
145	Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 3mm to 4mm	13	Rs.20/Kg.
146	Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 4mm to 5mm	13	Rs.20/Kg.
147	Galvanised Pipes/ tubes conforming to ASTM specification with wall thickness 5mm and above	13	Rs.20/Kg.
148	Galvanised Pipes/ tubes with wall thickness 1mm or below	13	Rs.20/Kg.
149	Galvanised Pipes/ tubes with wall thickness above 1mm to 2mm	13	Rs.20/Kg.
150	Galvanised Pipes/ tubes with wall thickness above 2mm to 3mm	13	Rs.20/Kg.
151	Galvanised Pipes/ tubes with wall thickness above 4mm to 5mm	13	Rs.20/Kg.
152	Galvanised Pipes/ tubes with wall thickness 5mm and above	13	Rs.20/Kg.
153	Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3"	12	Rs.35/Kg.
154	Gate Clip Made of Mild Steel	12
155	Gate Hold Back made of Mild Steel	12
156	Gate Latch Made of Mild Steel	12
157	Gun metal valves	7
158	MS Colour coated ghamla (made of HS Steel)	10
159	Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator)	3
160	Heavy duty Fork latch	11
161	Deleted
162	Deleted
163	High Chromium Grinding media balls	7	Rs.35/Kg.
164	Hot Dipped Galvanised tension Bar/ Gate Rods/ Truss Rods/ Drop Rods.	9
165	ILD Fork	11
166	ILD Guide	11
167	Industrial Offset Hinge	11
168	Industrial Offset Bracket	11
169	Industrial Locking Device	11
170	J-bracket	11
171	Locks and valves water pipe fitting	9
172	Loop Cap Made of Mild Steel	9
173	LPG Cylinders with valves	9
174	Male Hinge/Male Bracket Made of Mild Steel	11
175	Male Lag Bracket Made of Mild Steel	9
176	Marine freight containers of type ICC 20'x8'x8.5'	13
177	MS Paper pin & Clip	11	Rs.40/Kg.
178	Steel Needle Screws Self colour or Plated	9
179	Nickel Plated M S Buckles	10
180	Offset Rail End	13
181	OTS Cans/ dingeley cans	9
182	Oxygen Cylinder dia 140 NF	11
183	Oxygen Cylinder dia 229 MM	11
184	Deleted
185	Photo frame (Brass)	7
186	Presensitised Positive Offset Aluminium plates	9
187	Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass	7
188	Rail End	13
189	Rakes/Garden Rakes/ Fork Manure Hooks made of Iron and/or Steel	12
190	Rectangular/ Square Tin Plate container and/ or components thereof	8
191	Rectangular/Square Tin Plate container and/or component thereof with round neck.	8
192	Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece)	8
193	Deleted
194	Sanitary and bathroom fittings (of brass)	7
195	Sanitary and bathroom fittings (of gun metal)	7
196	Shovels/Spades made of Iron and/or steel, with or without handle, irrespective of what material the handle may have been made of	10
197	Folding bed made of mild steel	8
198	Sleeve made of Mild steel	13
199	Sleeve Bracket made of mild steel	13
200	Stainless Steel safety razor Blades	7
201	Stainless Steel Vacuum Flask	8
202	Stainless steel wire rope	9
203	Stapler	4
204	Steel Clamp (Galvanised) and ungalvanised-All types	11
205	Mild Steel pegs	10
206	Mild Steel Weld mesh	11	Rs.55/Kg.
207	Mild Steel Stranded wire	11	Rs.26/Kg.
208	Surgical blades other than made of High Carbon Steel	9
209	Surgical Blades made of High Carbon Steel	9
210	Table Pencil Sharpener made of plastics	7
211	Tension Band	11
212	Tiller Left Hand or Right Hand	9
213	Top and Bottom cover of Round Battery Jacket made from Tin plate	4
214	Tower Crane	11
215	Track Wheel	11
216	Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/Razor Box (1 Razor Handle + 5 twin blades in a magazine both packed in a plastic box)/ Razor Card(1 Razor Handle + 5 twin blades in a magazine bubbled and fixed on a card)/ Magazine (5 twin blades packed in a magazine)	8
217	Twin type shaving system Razor/ Razor Handle	6
218	Mild steel U-Bolt	10
219	Deleted
220	Mild Steel Universal Bracket	11
221	Valve for LPG Cylinder, Hand wheel type, made of Brass	5
222	Water meters of outer casing made of brass.	5
223	M.S. Wire Nails	9
224	Wood screws made of carbon steel self colour or plated	9
225	Zinc plated (Galvanised) conduit Hanger	10
226	Ball/ Roller /Thrust/ clutch release/ spherical plain Bearing	8	Rs.600/Kg.
227	Bench Grinder 6"	5
228	Brazed Carbide Tools	9
229	Brazed Tools Carbide Tips	9
230	Pneumatic tool	7
231	Cutting Tools of High speed Steel (Cobalt Grade)	5
232	Cutting tools of High Speed Steel (Non-Cobalt Grade)	5
233A	Casing Pipes conforming to API Specifications 5CT or equivalent of OD 114mm to 508mm (4 to 20)made out of Seamless Steel Pipes	13	Rs.130/Kg.
233B	Casing Pipes confirming to API Specifications 5CT or equivalent of OD 114mm to 508 mm (4 to 20) made out of ERW Steel Pipes	13	Rs. 40/Kg.
233C	Tubing/Hollow Drill Rods/Coupling/Core Barrels and substitutes made out of Carbon Steel Seamless Tube/Pipe	13	Rs.130/Kg.
234	Drills/Reamers End Mills/ Broaches Milling cutters incuding Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade).	8
235	Drills/Reamers End Mills/ Breaches/Milling cutters including Threading Tools/ Taps of High speed (Cobalt Grade)	8
236	Pneumatic Revetting hammer	7
237	Resin bonded diamond wheels	4
238	Saws/ Segments made from high speed steel strips/ sheets	5
239	Front Engined Three Wheeler Drive away Chasis in CKD/SKD/ CBU condition	11
240	Rear Engined Auto Rikshaw in CKD/SKD/CBU condition	11
241	Scooter (in CKD/SKD/CBU condition)	11
242	Motor Cycle (in CKD/SKD/CBU condition)	11
243	Moped (in CKD/SKD/CBU condition)	11
244	Alternator Assembly	9
245	Non-alloy Steel Anchor Pin	11
246	Armature for Delcoremy type motor	10
247	Armature for Dynamo	10
248	Starter Motor Armature for Low Speed Vehicles	7
249	Automobile Tyre-Tube Valves	11
250	BB Axle	11
251	Brake shoe plate	13
252	Cam	10
253	Cam Shaft	10
254	CBH Flate for starter motor	10
255	Commutator	7
256	Cone Sleeve/Axle Stud sleeve	11
257	Connecting Rod	6
258	Cotter pin made of steel of any quality	11
259	Crank for chain wheel	10
260	Crank Shaft (for four wheelers)	10
261	Crank Shaft (for two wheelers)	10
262	Crank-shaft Forgings/ connecting rod forgings	10
263	Deep Well Hand pump complete without connecting Rods with/ without spares & Tools	12
264	Deepwell hand pump with 10 connecting rods.	12
265	Draw bars	10
266	Drive assembly for starter motor	9
267	End-Cap Assembly	8
268	Field Coil for Starter Motor	9
269	Flex Plate Assembly	9
270	Flywheel Starter Ring Gear	9
271	Front Axle beam/I-Beam	11
272	Front/rear axle shaft	11
273	Full Tension Sleeve made of steel	7
274	Deleted
274A	Galvanised Spokes other than for bi-cycles	11
274B	Galvanised Spokes for bi-cycles	11	Rs.85/gross
275	Generator (Dynamo) Assembly	10
276	Half Collets for engine valves	8
277	Deleted
278	Steel Hub bolts	9
279	Steel Hub cone	9
280	Ignition Coil oil filled	10
281	Ignition Coil Resin Cost	10
282	Inlet exhaust valves	5
283	Integral Shaft Water Pump bearing for automotive applications	11
284	King pin made out of alloy steel	9
285	Laminated Leaf Springs/Springs	8
286	Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition	7
287	Machined trailor ball/hitch pin/linkage pin	10
288	Nozzles made of steel	7
289	Oil Bath Gear case	8
290	Piston Pin/ Gudgeon Pin	7
291	Push rod	9
292	Rear Axle Assembly for LCV/ HCV (Assembly/SKD)	11
293	Rocker Arm/ Rocker Shaft made of steel	10
294	Roller for auto break shoe	11
295	Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing.	9
296	Sleeve Shaft and Ball Joint	7
297	Slip Ring	6
298	Slip Stub Shaft	7
299	Solenoid Switch Pre-engaged type	9
300	Solenoid Switch Co-axial type	9
301	Spindles made of steel	7
302	Sprocket with central axle	8
303	Starter motor with maximum current upto 1100 Amps	8
304	Stator for alternator for Light Duty (12 Volts 60-95 Amps)	9
305	Submersible Water pump sets i.e. Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes	9
306	Valve Tappets	9
307	Voltage Regulator	5
308	Aluminium Ingots	3
309	Aluminium Sow Ingots	3
310	Aluminium Wire Bar/ Rod	3
311	Brass Washers of all types	7
312	Brass Wood Screw	8
313	Calcined Alumina	7
314	Copper flats/ Sheets/ Strips	8
315	Copper Foils	8
316	Lead Antimony Wire	10
317	Phosphor Bronze fabric	10
318	Pressure die cast article made of zinc	11	Rs.60/Kg.
319	Tin Ingots	2
320	Valve Stems made of brass	5
321	Magnetic assemblies incorporating cast alloy permanent magnets viz. pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/ door catches/ vee blocks bases/ hold fast	6
322	Galvanised/ungalvanised spikes for use as Railway Track material	11
323	Gear cutting tools of Cobalt bearing high speed steel	5
324	Industrial Diamond prod. Diamond Grinding wheels/ Diamond file and tools	4
325	Aluminium Pistons, in fully machined conditions	7
326	Ferro Chrome/ Charge Chrome	8
327	Ferro Manganese (Fe Mn)	8
328	Ferro Silicon (Fe Si)	9
329	Cold Rolled Galvanised Non-alloy Steel sheets/Hoops & Strips/ wide coils/ Circles(Plain/ Corrugated)	12	Rs.25500/MT
330	Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)	5
331	Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco	11
332	High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars	10
333	High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars	10
334	High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars	10
335	High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars	10
336	High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products	11
337	High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products	11
338	Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	11	Rs.14000/MT
339	Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars	11	Rs.33000/MT
340	Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars	11	Rs.21000/MT
341	Non Alloy Steel wire Coated/ Plated or otherwise	11	Rs.30/Kg.
342	Hot rolled Galvanised Non-Alloy Steel Sheets /Hoops and strips/Wide coils (plain/corrugated)	10
343	Non alloy Steel Ingot, Billets, Blooms and slabs	10
344	Alloy Steel Wire coated, plated or otherwise.	10	Rs.35/Kg.
345	Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed Bars, Thermo mechanically treated reinforcing Bars ), Angles, Shapes & Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers	10	Rs.25/Kg.
346	Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	11	Rs.21000/MT
347	Silico Manganese (Si Mn)	8
348	Stainless Steel Wires	11
349	CR Stainless Steel Sheets/ Hoops & Strips/ Wide Coils/Circles with/without annealing/skin passing	12
350	Hot Rolled Non Alloy Steel Plates/Wide Coils/Sheets/Hoops & Strips (including skelp)	12
351	Low Carbon Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% Carbon)	8
352	Ferro Molybdenum (60-65% Molybdenum)	6
353	Table, Kitchen and other household articles made of Stainless Steel with or without handle/lid irrespective of what material the handle/lid may have been made of	13	Rs.135/Kg.
354	Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of	13	Rs.125/Kg.
355	Aluminium artware	6
356	Aluminium Circles/Slugs	7
357	11 KV, Indoor Vacuum circuit Breaker Panels	9
358	CRGO Transformer Lamination (Core Laminations)	11	Rs.40/Kg.
359	11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm.	11
360	Cast Iron Wheel	9
361	Cold Rolled painted/ coated High Tensile steel strapping	13	Rs.29/Kg.
362	Ferrous investment & Precision castings	2
363	Manhole Cover	9
364	Sanitary casting	9
365A	(a) Forged Steel ball made of mild steel/non-alloy steel	11	Rs.80/Kg.
365B	(b) Forged Steel ball made of alloy steel	11	Rs.100/Kg.
365C	(c) Forged steel ball made of stainless steel	11	Rs.175/Kg.
366	Thermostatic type bimetal/ trimetal strip of various grades	10
367	Cast Iron Weights	9
368	Cast Iron Vice	9
369	Hacksaw Frame	8
370	Automatic Socks Knitting Machine (Mechanical)	10
371	Computerised Automatic Power Socks Knitting Machine	10
372	Hydraulic End Cap	9
373	Injection moulding machine parts: Deckel /Cover made of non Alloy Steel	9
374	Injection Piston	9
375	Plates Injection cylinder	9
376	Speed Frame Drafting System	7
377	Tail Stocks made of Steel	9
378	Textile Spindle upper part	10
379	Textile spindle with insert	10
380	Thrust housing made of Steel	9
381	Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/Billets/Slabs), Bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire rods etc)., Angles, Shapes & Sections (including Special Profiles), Plates, Hot Rolled Sheets/Hoops and Strips (including Skelp)/Wide Coils	10
382	Alumina Carbon Bricks/ Shapes and/or Ramming Mass, Castables and Mortars	10
383	Alumina Carbon/ Slide Gate Plate Refractory and Attachments	10
384	Alumina Fused Cast Refractories	10
385	Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars	11	14000/MT
386	Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron)	5
387	Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non-Alloy/ Alloy Steel (excluding Stainless Steel) Sheets/Hoops and Strips/Wide-Coils, including CRCA	12	DEPB Rate corrected to read as 20% w.e.f. 1/4/2003 till 9.2.2004. Thereafter DEPB rate will be 12%
388	Iron Ore pellets (from Limonite Ore)	4
389	Iron Ore Pellets. (from Haematite Ore)	4
390	Stainless Steel Ingots, Semis (Blooms/Billets/Slabs) Bars and Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Channels, Special Profiles), Plates/HR Sheets/Hoops and Strips (including Skelp)/Wide Coil	11
391	Pig Iron/Hot Metal	6
392	Alumina Carbon Continuous Casting Refractories and/or Mortars	10
393	2" Bungs with or without Washer/Gasket	10
394	2" Flanges with or without Washer/Gasket	10
395	Bolt Axle made of mild Steel	9
396	Boulevard Clamp made of Steel	11
397	Box Girders for Bridges	9
398	Clevis	11	Rs. 40/Kg.
399A	Hoe Blade	8
399B	Hoe Eye	8
400	Articles manufactured out of GP Sheets not elsewhere specified	9	Rs.30/Kg.
401	Articles manufactured out of Tin Plate prime quality not elsewhere specified	8
402	Postcap	8
403	Rectangular tops made of Electrolytic tin plate fitted with screw neck & handle and bottoms	8
404	Round tops/ ends (bottoms) of containers made of tin plate	8
405	Rubber Wheel made of mild steel	13
406	Mild Steel Scrool	13
407	Vertical Arm made of mild steel	13	Rs.25/Kg.
408	Y Arm Made of mild Steel	13	Rs.25/Kg.
409	Slitting cutters made of mild steel	5
410	Forged Crank Shaft	10
411	Front Axle Beam Forging	10
412	Forged Crank Shaft Fully Machined (Made Of Alloy/ Non-Alloy Steel)	10
413	Front Axle Beam Fully Machined	10
414	MS Window, Doors, Ventilators, Grate, Grille, fabricated, frames and Components/ parts thereof	11	Rs.25/Kg.
415	Non Alloy Steel Flanges/ Couplings / Tees/ Elbows	9
416	Seamless Stainless Steel Tubes (Cold Finished)	11	Rs.250/Kg.
417A	Fully Threaded Rod made of non-alloy steel/ mild steel(Galvanised/Ungalvanised)	12	Rs.20/Kg.
417B	Fully Threaded Rod made of Alloy Steel including Stainless Steel	12	Rs.90/Kg.
418	PTFE Cables	9
419	Silica Bricks/Shapes For B.F Stoves	9
420	Silica Bricks/Shapes For Coke Ovens	9
421	Silica Mortar	2
422	Stainless steel flanges/ couplings / Tees/ Elbows	11
423	Bicycle Chains	6
424	Manganese Steel Cast Articles (Rough/machined)	9
425	Non Alloy Steel Castings Rough/Machined	7
426	Spheroidal Graphite/ Malleable/ Ductile Iron Castings (Rough/machined)	7
427	Copper Bonded Grounding Rods	9
428	Bearing Races	2
429	Carbon/Non Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)	10
430	Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)	11	Rs.55/Kg.
431	Fabricated Steel Hardware/ Structure/Articles not elsewhere specified Made out of MS HR Plates/ Sheets/ Coils/Strips	7
432	Industrial Roller Chain / Motorcycles including Moped Chain/ Automotive Timing Chains ( all types including spares )	6
433	Industrial Valves (cast or forged body)	4
434	MS Bucket Handles Duly Nickel Plated	8
435	Perforated Construction Stakes (Round/ Flat/ Square)	7
436	Printed Lug Cap With Internal Coating Lined With PVC Compound	4
437	Steel Hinges Bar Type	7	Rs.20/Kg.
438	Zinc Plated (Galvanised) Steel Lock Nuts (Blanked/Punched) from H.R.Coil/ Sheet	9	Rs.150/Kg.
439	Automotive Water Pump	4
440	Clutch Cover Assembly	4
441	Clutch Plate/Disc Assembly/Driven plate	4
442	Spline Hubs for clutch plate	4
443	Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised	6
444	Tractor Parts Ratchet Jack Assembly	7
445	Brass Wire	9
446	Stainless Steel rough castings	10
447	Aluminium Foil Commercial Grade Embossed/Non Embossed, Cut to Shape, Preformed,with/without Coating, with/without Printing, with/without Reinforcing Material	7
448	Aluminium Foil Paper backed	8
449	Aluminium Foil Plastic Coated/ Laminated	7
450	Aluminium Foil Synthetic Resin/ Lacquer Coated Printed	7
451	Aluminium Foil Synthetic Resin/ Lacquer Coated	7
452	9 KV 5 KVA Conventional Surge Arrester Distribution Type With Mounting Breenet And Insulators	10
453	Non-Alloy Ground/ Earthing Rods (Galvanised)	10
454	Stainless Steel Cable Ties made of SS.316 Grade	2
455	Alloy Steel Castings (Rough/Machined)	7
456	Galvanised Steel Wire Strand	9
457	Anchor Bolt With Nut	7
458	Ferro Vanadium	9
459	Magnesium Ferro Silicon	11
460	Cable Ties made of Stainless Steel	2
461	Pilfer proof caps/ Seals Plain/printed with EP Liner	8
462	Pole Line Hardware fittings and Accessories (Galvanised)	10
463	Carbon steel submerged arc welded pipes as per API grade or ASIM grade or equivalent or hot formed steel bends as per API, ASTM grade or equivalent degree: 0-180 degree	11	Rs.27000/MT
464	Machined /Cold rolled/Cold Formed ring for bearing races, CV cages	9
465	CRCA butt hinges	4
466	CRCA hinges electric brass plated	4
467	CRCA hinges self colour	4
468	CRCA hinges zinc plated	4
469	TEE Hinges (painted/ zinc plated) made of steel	4
470	Transformer (copper wound) above 100 KVA upto and including 400 KVA 3 phased, oil cooled.	9
471	Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled.	9
472	Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled.	9
473	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr.	10	Rs.34000/MT
474	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr.	10	Rs.34000/MT
475	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr.	10	Rs.34000/MT
476	Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr.	10	Rs.34000/MT
477	Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter	8
478	Electric door bell	8
479	Steel tapes/rules (1 meter to 50 meters)	4
480	Ceramic coated steel pipes with or without coupling	9
481	Cryogenic tanks for liquified gases	6
482	Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB	7
483	Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5 2.5%, Carbon 1.5 2.5% balance Iron	7
484	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14	3
485	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy GA- 17G/A-17X	3
486	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS- 30/KS-30/F-14/SAE/ 48/SL	3
487	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L-200/G-24/SAE-15	3
488	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-10/ L S-10/G-46/SAE-797/SY/F-100/F-59	3
489	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper Lead Alloy of GS-23/ L.S-23/G-48/SAE-799/SX/F-250/F-7	3
490	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP	3
491	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy SL/KS/30/GS/30/F-14/SAE48/SP/KS 25/GS 25/G 41/F 770-780/H 24/F112/SAE 49/SY/F 100/HF 2/LS/F-770/SL/KS 30/GS 30/F-14	3
492	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/ SL/KS30/ GS30/F-14	3
493	Deleted
494	Deleted
495	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based F-820/ F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A6/GA 6/A300/G73/SAE 770-780	3
496	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin BASED ALLOY GA 6/ A6/G 73A 300/SAE 770/ AS11	3
497	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed High Tin Alloy F-780/SP /H24/ GS25 /KS 25/G-41/SAE-49	3
498	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based AlloyF100/SY/HF2/ LS10 /gs10/Glyco-46/SAE/792	3
499	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F- 250/SX/HF 16 orH-116/LS-23/GS-23/ Glyco- 48/SAE-792	3
500	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783	3
501	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770	3
502	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/ G-32/B-100/SAE-12	3
503	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13	3
504	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X	3
505	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy AL-6	3
506	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Lead Alloy F-66/ AL-6M	3
507	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2	3
508	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/ GL-13/L-100/F-99/SAE-13/GM-155	3
509	Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41	3
510	Metallurgical coke	2
511	Chain wheel	10
512	Multispeed free wheel	8
513	Welded steel pipe	7
514	Bronze impellers for inter stream/ Thrustream pumps all types	3
515	Taper roller bearing	5
516	Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever	5
517	Cast iron parts for sewing machine namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft	1
518	Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for Feed Fork, Needle Bar, Screw and Nut for C.C Rod, Shuttle Race top spring, O/S Rock shaft	9	Rs. 60/Kg.
519	Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover	3
520	Portable bag closure machine	4
521	Submersible pumps	11
522	Non alloy steel forged (machined) hammers upto 10 kgs piece wt. without handle or with handle made of steel /wood/ rubber gripped steel pipe.	8
523	Chain wheel and Crank set	9
524	Triple chainwheel and crank set	9
525	Multi Cylinder Fuel injection Pumps for Diesel Engines	8
526	Single Phase Motor	4
527	Automotive Oil filters/fuel filter/Spin on filters/oil or fuel filter assembly/canister-lub oil filter/air filter	4
528	Aluminium Alloy Billets	3
529	Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.	6
530	Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.	6
531	Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.	5
532	Identifiable ready to use machined parts/components made wholly or predominantly of Carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.	4
533	Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel(0ther than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.	4
534	Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process, not elsewhere specified.	7
535	Brake Drums made of Alloy Cast Iron	10
536	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA.	7
537	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA.	7
538	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA.	7
539	Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA.	7
540	Nut and Shaft Assembly for Automobile	5
541	Paper Punches	5
542	Truck & Trailer Wheels	11
543A	(a) Carbon Steel Forged Flanges	10
543B	(b) Alloy Steel including Stainless Steel Forged Flanges	10
544	Electrode holder mainly made of copper or brass	6
545	Staples/ Staples in strips made of wholly galvanised steel wire	6
546	Disc Horn	10
547	Stainless Steel casseroles	4
548	Handle Bar Switch	9
549	Grip for Handle Bar	6
550	Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW	12
551	Rear Axle Housing Assembly for LCV/HCV	10
552	Constant Temperature Baths	4
553	Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/27 - 1000 pcs	5
554	Earth Moving Wheel having diameter not less than 25"	11
555	Sewing Machine Part - shuttle hook - Mild steel	8
556	Cold Rolled Alloy / Non Alloy Steel Hardened and Tempered Saw Blades	2
557	Electrical Wiring Accessories / Components made of Phosphors Bronze	9
558	Textile Machinery Spare Parts - Perforated Nickel Screen	1
559	PCB Routers	3
560	Electrolytic Tin Plate	13
561	Plastic Extrusion Plant and Machinery	7
562	Automotive Locks other than Ignition Locks	8	Rs.700/Kg.
563A	Automobile Ignition Locks for cars	13	Rs.3000/Kg.
563B	Automobile Ignition Locks for two wheelers	11	Rs.525/Kg.
564	Aluminium Oxide Resin Disc	4	Rs.8/Piece
565	Endless coated Zircon Cloth Belts	9	Rs. 330/sq.mt.
566	Non-Cast Hardware Fittings made of Stainless Steel Rod, Grade 304	7	Rs.350/Kg.
567	FTL Caps	8	Rs.350/Kg.
568	Vetrified Grinding Wheel	5
569	PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 mm-6.5 mm	8
570	Hypodermic Needle Disposable	4
571	Spheroidal Graphite Quality/Steel quality Alloy IC quality/ICDP quality/High Chrome quality Rolls for Rolling Mills.	10
572	Watch Dials made out of Nickel Silver Brass Strip Published	11	Rs.27/Piece
573	Steel Cops/Pirn/Bobbins	10	Rs.56/Kg.
574	Hermetically Sealed Compressor for Air Conditioners using R-22 refrigerant gas having cooling capacity -K Cal3400 +/- 5% /4790+/-5% /5214+/-5% /6350+/-5% per hour	10	Rs.5000/Piece
575	Agricultural Sprinkler mainly made of Brass	3
576	Earth Moving Wheel components---Gutter Band	11	Rs.80/Kg.
577	Earth moving wheel----Detachable Flange	9
578	Chrome/Nickel Plated wire wheel for all types of car	9
579	Shock Absorber	6
580	Power take offs/clutches	2
581	Shoulder Bolt made out of CHQ alloy steel/Stainless Steel	4	Rs.800/Kg.
582	Dowell Pin made out of CHQ alloy steel/Stainless Steel	8	Rs. 400/Kg.
583	Single Cylinder Pump for Diesel Engine	9	Rs.1150/Kg.
584	Nickel Screen	1
585	All Aliminium Alloy Conductor	9
586	Auto Parts Double Brake Chamber Type 24 L/S	8	Rs.750/No.
587	Auto Parts Brake Chamber Type-16 L/S, Type-20 L/S, Type 24 L/S, Type 30 L/S, Type 30 S/S	8	Rs. 375/No.
588adhoc	Hermetically Sealed Compressor for Refrigerators & Commercial Refrigeration Applications using eco-friendly gases.	10	Rs. 1200/Pc. valid for 6 months from the date 4.2.04 applicable to M/s. Tecumseh Products (I) Ltd., & M/s BPL Compressors Ltd., Hyderabad only
589	Textile Machinery Continuous open with Chainless Mercerising Machine	10	Rs.700000/No.
590	Zinc Concentrates	3
591	Tube Forming Rolls	4
592	Diffuser and parts thereof	5

Presented by eximkey.com