Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl. No.A-3272, new entries at Sl. No. A-3273 to A-3289 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1934, new entry at Sl.No.C-1935 shall be added as per Annexure “C” to this Public Notice.
After the existing entry at Sl.No.H-536 , new entries at Sl.No.H-537 to H-543 shall be added as per Annexure “D” to this Public Notice.
After the existing entry at Sl.No.J-355 , new entries at Sl.No.J-356 to J-357 shall be added as per Annexure “E” to this Public Notice.
5. This issues in public interest.
(L. MANSINGH)
DIRECTOR GENERAL OF FOREIGN TRADE
| Sl.No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 50 | Chemicals & Allied Products Sl.No.A254 | After the import item at Sl. No. 2, the following import items (with quantity) shall be added:- |
| “3. Furnace Oil | 0.735 Lit/kg |
| 4. L.D.O. | 0.210 Lit/kg” |
| 2. | 153 | Engineering Product Sl.No.A1168 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1168 | Silicon Carbide Grains | 1 MT | 1. Silicon Carbide Crude/ Lumps (containing not less than 95% on dry basis) | 1.15 MT |
| Note : The Purity of export product shall not be lesser than the purity of import item. |
| 3. | 230 | Chemicals & Allied Products Sl.No.A1790 | After the import item at Sl. No. 9, the following import items (with quantity) shall be added:- |
| “10.LDO/SKO | 0.435 kg” |
| 4. | 236 | Chemicals & Allied Products Sl.No.A1837 | After the import item at Sl. No. 8, the following import items (with quantity) shall be added:- |
| “9.LDO/SKO | 0.216 kg” |
| 5. | 284 | Chemicals & Allied Products Sl.No.A2217 | The quantity of import item at Sl. No. 1, shall be amended to read as under:-“0.717 kg” |
| 6. | 5 | Engineering Product Sl.No.A2312 (amended vide Public Notice No.31 Dated:05.11.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2312 | Zirconium Octoate 18% (Zirconium content 18%) | 1 kg | 1. 2-Ethyl Hexanoic Acid/ Dimethyl Hexanoic Acid Octoic Acid | 0.396 kg. |
| 7. | 357 | Chemicals & Allied Products Sl.No.A2821 | After the import item at Sl. No. 3, the following import items (with quantity) shall be added:- |
| “4.LDO/SKO | 0.369 kg” |
| 8. | 365 | Chemicals & Allied Products Sl.No.A2890 | After the import item at Sl. No. 7, the following import item (with quantity) shall be added:- |
| “8. Furnace Oil | 1.04 Lit/kg” |
| 9. | 366 - 367 | Chemicals & Allied Products Sl.No.A2901 | The description of export item shall be amended to read as under:- “Allura Red (Food Red 17) (C.I. No. 16035” |
| 10. | 368 | Chemicals & Allied Products Sl.No.A2913 | After the import item at Sl. No. 1, the following import item (with quantity) shall added:- |
| “2. Furnace Oil | 1.29 Lit/kg” |
| 11. | 12 | Chemicals & Allied Products Sl.No.A3028 (Amended vide Public Notice No. 37 Dated:03/10/2002) | Quantity of import item at Sl. No.7, shall be amended to read as under:-“1.16 kg” |
| 12. | 14 | Chemicals & Allied Products Sl.No.A3122 (Amended vide Public Notice No. 54 Dated:03/01/2003) | The description of import item at Sl. No. 1 & 2, (with quantity) shall be amended to read as under:- |
| “1. Para Chloro Benzotrichloride | 2.25 kg |
| 2. Phenol | 1.00 kg” |
| 13. | 35 | Chemicals & Allied Products Sl.No.A3164 (amended Vide Public Notice No.03 Dated:31/03/2003) | The description of export item shall be corrected to read as under:-“2,6 Dichloro Diphenylamine” |
| 14. | 14 | Chemicals & Allied Products Sl.No.A3175 (Notified vide Public Notice No. 10 dated: 30/05/2003) | 1. The quantity of import item at Sl. No. 6, shall be amended to read as under:-
“0.031 kg /kg of the export product instead of 0.30 kg”
2. The quantity of import item at Sl. No. 16 shall be amended to read as under:-“0.033 kg/kg of export product instead of 0.020 kg”
3. After import items at Sl. No. 16 the following additional inputs (with quantity) shall be added:- |
| “17. Refined Linseed Oil | 0.088 kg/kg of export product |
| 18. Oxy Aluminium | 0.005 kg/kg Octoate of export product |
| 15. | 23 | Chemicals & Allied Products Sl.No.A3188 (amended Vide Public Notice No.15 Dated:07/07/2003) | 1. The description of export item shall be amended to read as under:-“Bisphenol Amino Ester (Propane 2,2-Diphenyl-4, 4’Bis (2-Amino Phenyl-1-Sulfonyloxy)”
2. The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-“Bisphenol A” |
| 16. | 656 | Engineering Product Sl.No.C820 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C820 | S.S. Fabricated/ Welded Pipes/ Tubes | 1 MT | 1. Stainless Steel Plates/ Sheet/ Strips/ Wide Coils of relevant grade & specification | 1.10 MT. |
| 17. | 657-658 | Engineering Product Sl.No.C832 | The description of export item shall be amended to read as under:-
“Table, Kitchen & other household article of round shape made of Stainless Steel with or without handle irrespective of what material the handle may have been made of” |
| 18. | 658 | Engineering Product Sl.No.C833 | The description of export item shall be amended to read as under:-
“Table, Kitchen & other household article made of Stainless Steel with or without handle irrespective of what material the handle may have been made of (other than those covered under C-832)” |
| 19. | 8 | Engineering Product Sl.No.C873 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The quantity of export item shall be corrected to read in “Nos.” |
| 20. | 707 - 710 | Engineering Product Sl.No.C1059 | The description of export item shall be amended to read as under:-
“Light Commercial Vehicle (LCV) of GVW upto 7.5 MT” |
| 21. | 710-713 | Engineering Product Sl.No.C1062 | The description of export item shall be amended to read as under:-
“Medium Commercial Vehicles GVW above 7.5 MT and upto 12 MT in CBU/SKD/CKD condition” |
| 22. | 777 | Engineering Product Sl.No.C1375 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1375 | Machined cast Bushings of Automotive and Non-Automotive applications, Pumps and valve Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red BrassOR with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400-LB2, LG2, LG4/DIN 1705-RG5, RG7/ ASTMB 584 or ASTMB 763-C84400, C03200/C93700/SAE660 | 1 kg | 1. Gun Metal / Red Brass / Leaded Bronze Ingot / Copper Cathode with alloying elements Tin, Lead and Zinc | 1.20 kg/kg content in the export product |
| 23. | 872-873 | Engineering Product Sl.No.C1745 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1745 | Hermetically sealed compressors for air conditioner using R 22 refrigerant gas of different capacities | 1 No. | 1. Components | Net to net basis except upper and lower housing |
| 2. (a) CRNGO Steel Sheet upto 3500 Kcal/hr | 0.0032 Kg/ Kcal |
| (b) More than 3500 Kcal/hr | 0.0024 kg/ Kcal |
| 3.(a) Copper Wire upto 3500 Kcal/hr | 0.0005 kg/k/cal |
| (b) Mote than 3500 Kcal/hr | 0.0004 kg/Kcal |
| 4. (a) Music Wire Upto 3500 Kcal/hr | 0.000016 kg/ Kcal |
| (b) More than 3500 Kcal/hr | 0.000011 kg/ Kcal |
| 5. (a) Refrigeration Oil Upto 3500 Kcal/ hr | 0.0003 Ltrs/ Kcal |
| (b) More than 3500 Kcal/hr | 0.0002 Ltrs/ Kcal |
| 6. HR non alloy steel sheet/ coils | 1.28 KG/KG content |
| 7. EC grade aluminium ingot | 1.08 Kg/Kg content |
| 24. | 873 | Engineering Product Sl.No.C1746 | The norm covered by this entry shall be deleted. |
| 25. | 873 - 874 | Engineering Product Sl.No.C1747 | The norm covered by this entry shall be deleted. |
| 26. | 874 | Engineering Product Sl.No.C1748 | The norm covered by this entry shall be deleted. |
| 27. | 33 | Engineering Product Sl.No.C1899 (Notified vide Public Notice No. 15 Dated:07/07/2003) | After import item at Sl. No.5, the following import item (with quantity) shall be added:- |
| “6. Relevant Stainless Steel Sheets | 1.08 kg/kg content in the export product” |
| 28. | 21-23 | Engineering Product Sl.No.C1909 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 29. | 24-26 | Engineering Product Sl.No.C1910 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 30. | 26-28 | Engineering Product Sl.No.C1911 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 31. | 29-31 | Engineering Product Sl.No.C1912 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 32. | 31-33 | Engineering Product Sl.No.C1913 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 33. | 34-35 | Engineering Product Sl.No.C1914 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 34. | 36-37 | Engineering Product Sl.No.C1915 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 35. | 38-39 | Engineering Product Sl.No.C1916 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 36. | 40-41 | Engineering Product Sl.No.C1917 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-“Ammonium Polyacrylate” |
| 37. | 42-43 | Engineering Product Sl.No.C1918 (Notified vide Public Notice No. 23 Dated:10/09/2003) | The description of import item at S. No. 1 (J) (without any change in quantity) shall be corrected to read as under:-“Ammonium Polyacrylate” |
| 38. | 19 | Engineering Product Sl.No.C1929 (Notified vide Public Notice No. 31 Dated:05/11/2003) | The quantity of export item shall be amended to read in “Nos. instead of Kgs. |
| 39. | 963 | Plastic Products Sl.No.H-15 | The Foot Note below this entry shall be deleted. |
| 40. | 964 | Plastic Products Sl. No. H-24 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-24 | Articles made of HDPE/ PP twine / Rope OR Articles made of blend of HDPE&PP Twine / Ropes | 1 kg | 1. Relevant HDPE/PP Granules/ Chips | 1.08 kg/kg content in the export product |
Note : 1. The relevant HDPE & PP Granules may be allowed as 1.08 kg./kg content in the export product both for exclusive Articles made of HDPE/PP Twine /Ropes and for Articles made of blended HDPE & PP Twine / Rope on the actual net content of that relevant polymer i.e. HDPE or PP in the blended export product.
Note : 2. In case of coloured export items, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.06 kg/kg content in the export product. |
| 41. | 9 | Plastic Products Sl. No. H-333 (corrected vide Public Notice No. 61 Dated:03/02/2003) | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-333 | Twine/ Rope made of HDPE/ PP
OR
Twine/ Rope made of a blend of HDPE & PP in varying proportions | 1 kg | 1. Relevant HDPE/PP Granules/ Chips | 1.07 kg/ Kg content in the export product |
Note: 1. The relevant HDPE &PP Granules may be allowed as 1.07 kg/kg content in the export product both for exclusive HDPE/PP Twine/ Ropes and for Twine/ Rope made of blend of HDPE & PP on the actual net content of the relevant polymer i.e. HDPE of PP in the blended Twine/ Ropes to be exported.
2.In case of export of coloured Twine/Ropes, the relevant colour Master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.05 kg/ kg content in the export product. |
| 42. | 1025 | Plastic Products Sl. No. H-349 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H349 | Tape / Yarn (plain Twisted) made of HDPE/PP OR Tape / Yarn (Plain / Twisted) made of blend of HDPE & PP in varying proportions | 1 kg | 1. Relevant HDPE/PP Granules/ Chips | 1.05 kg/kg content in the export product |
Note : 1. The relevant HDPE & PP Granules/Chips may be allowed as 1.05 kg./kg content in the export product both for the exclusive HDPE/PP and Tape /Yarn made of blended HDPE & PP on the actual net content of that relevant polymer i.e. HDPE or PP in the blended Tape /Yarn to be exported.
Note : 2. In case of export of coloured Tape / Yarn, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the relevant polymer i.e. HDPE/PP shall be reduced to 1.03 kg/kg content in the export product. |
| 43. | 1041 - 1042 | Plastic Products Sl. No. H-444 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H444 | Aseptic Packaging of Aluminium Foil of thickness less than 0.2 mm backed by Paper & LDPE with/ without Polypropylene / MPM Strips | 1 MT | 1. Relevant Duplex paper Board / Bleached paper/ Kraft Paper | 1.10 MT/MT content in the export product |
| 2. Aluminium Foil | 1.10 MT/MT content in the export product |
| 3. LDPE Granules | 1.10 MT/MT content in the export product |
| 4. LLDPE/HDPE/MLLDPE Granules | 1.12 MT/MT content in the export product |
| 5. Etheylene Acrylic Acid Copolymer/ Adhesive Copolymer Granules | 1.12 MT/MT content in the export product |
| 6. Relevant Polypropylene Strips Modified Poly Metallosene Strips | Net to net |
| 7. Printing Ink | 12 kgs./MT of export product |
| 8. Photo Polymer Plates | 0.5 No./MT of export product |
| 44. | 10 | Plastic Products Sl. No. H-461 (amended vide Public Notice No. 61 Dated:03/02/2003) | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-461 | Prepared adhesives based on Plastic (Two component Laminating Adhesives) Adhesive (Polyurethane solution containing 60% Resin content and 40% Solvent) | 1 kg | 1. Adipic Acid | 0.090 kg |
| 2. Isophthalic Acid | 0.258 kg |
| 3. Mono Ethylene Glycol | 0.050 kg |
| 4. Diethylene Glycol | 0.195 kg |
| 5. 1,6-Hexane Diol | 0.015 kg |
| 6. Toluene Di-iso-cyanate | 0.035 kg |
| 7. Ethyl acetate/ methyl Ethyl Ketone (Relevant) | 0.400 kg |
| 45. | 5-6 (vol-2 Part-I)&(v)–(vi) (Vol-2 Part-II) | GENERAL NOTE FOR FUEL (Amended vide Public Notice No.27 Dated:06.10.2003) | After Sl. No. 18 of the General Note for Fuel, the following shall be added:- |
| “19. Bras Art Wares | 2% |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3273 | Ramipril | 1 kg | 1. L-Serine | 5.74 Kg |
OR
L-Serine Methyl Ester Hcl | 8.00 Kg |
| 2. Cyclopentanone | 5.54 Kg |
| 3. Pyrolidine | 5.00 Kg |
| 4. ECPP-Alanine | 1.23 kg |
| 5. 5% Palledium on Carbon | 0.200 Kg |
| 6. Di Cyclo Carbodiamide | 1.05 Kg |
OR
Propyl Phosphoric Anhydride N-Butyl Acetate 50% Sol | 2.10 Kg |
| 7. 1-Hydroxy Benzotriazole | 0.72 Kg |
| 8. Cyclohexane/Dimethyl Formamide | 8.50 Kg |
| 9. Methanol/Di Isopropyl Ether | 11.50 kg |
| 10.Chloroform | 15.00 Kg |
| A3274 | Anisyl Cyanide[(4-Mithoxyphenyl) Acetonitrile]/4-Methoxy Benzyl Cyanide | 1 kg | 1. p-Anisaldehyde | 1.13 Kg |
| 2. Toluene | 0.15 Kg |
| 3. Sodium Cyanide | 0.41 Kg |
| A3275 | Indoxacarb 14.5% SC | 1 kg | 1. Indoxacarb (on the basis of a.i. 71.25%) | 0.210 Kg |
| 2. Soprophor BSU | 0.060 kg |
| 3. Soprophor 3D33 | 0.090 Kg |
| 4. Methyl Soyate | 0.598 Kg |
| A3276 | Lannate (Methomyl 40% SP) | 1 kg | 1. Methomyl Tech. (a.i-98%) | 0.4120 Kg |
| 2. HI SIL (SiO2) | 0.0600 Kg |
| 3. Sucrose Octaacetate | 0.0040 Kg |
| 4. Sun Spray Oil | 0.0065 Kg |
| 5. Brilliant blue dye | 0.0020 Kg |
| A3277 | Hepta Sodium Salt of Diethylene Triamine Pentamethylene Phosphonic Acid (Active Salt Content = 32%) | 1 kg | 1. Yellow Phosphorous | 0.083 Kg |
| 2. Diethylene Triamine | 0.053 Kg |
| A3278 | Mono Chloro Benzene | 1 kg | 1. Benzene | 0.715 Kg |
| A3279 | Het Diol (1,4,5,6,7, 7 Hexa Chloro-2-3 Bis (Hydroxy Methyl) Bicyclo-2(2,1,1)-heptane-5) | 1 kg | 1. Hexa Chloro Cyclo Pentadiene | 0.850 kg |
| 2. Butene Diol | 0.270 kg |
| 3. Epichlorohydrin | 0.018 kg |
| 4. Toluene | 0.088 kg |
| A3280 | Oryazalin technical 98% Min. | 1 kg | 1. Potassium-4-Chloro 3.5 Dinitro benzene Sulphonate | 1.340 kg |
| 2. Di-N-Propyl Amine | 0.490 kg |
| 3. Thionyl Chloride | 0.720 kg |
| 4. Toluene | 0.680 kg |
| 5. Ethylene Dichloride | 2.290 kg |
| 6. Dimethyl Formamide | 0.116 kg |
| A3281 | Magnesium Aluminate Spinel (MAS-78) (containing alumina 77 + 1% and magnesium Oxide 22-23%) | 1 kg | 1. Magnesium calcined | 0.259 kg |
| 2. Alumina Calcined | 0.886 kg |
| 3. Dextrin | 0.019 kg |
| 4. Cemgrind (mixture of high boiling alkanolamine) | 0.105 gm |
| A3282 | Biocide Navdecide AL5014 (containing Gluteraldehyde 50%=9.41%) | 1 kg | 1. Gluteraldehyde 50% | 0.095 kg |
| A3283 | Hydroxylamine Hydrochloride | 1 kg | 1. Methyl Ethyl Ketoxime | 1.46 kgm |
| 2. Furnace Oil | 1.10 Lit |
| A3284 | Reactive Blue 221 (Reactive Blue BRX) | 1 kg | 1. Cyanuric Chloride | 0.187 kg |
| 2. N-Ethyl Meta Base Ester | 0.310 kg |
| A3285 | U.V. Curable Printing Ink-Black, Flush Route (Minimum Pigment 16.7 % + /- 1%) | 1 kg | 1. U.V. Flush Colour-Black (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate | 0.576 kg |
| 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate | 0.196 kg |
| 3. Reactive Monomer namely, Tri-Propylene, Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated, Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate | 0.073 kg |
| 4. Photo Initiator Combo | 0.124 kg |
| 5. P.E.Wax | 0.011 kg |
| 6. Fumed Silica /Additive | 0.051 kg |
| A3286 | U.V. Curable Printing Ink-various colours, Flush Route (Minimum Pigment 15 % + /- 1%) other than Black ,Cyan, Magenta and Yellow | 1 kg | 1. U.V. Flush Colour-Magenta (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate | 0.515 kg |
| 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate | 0.247 kg |
| 3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/Di-Pentaerythritrol Hexa Acrylate | 0.103 kg |
| 4. Photo Initiator Combo | 0.103 kg |
| 5. P.E.Wax | 0.011 kg |
| 6. Fumed Silica/ Additive | 0.051 kg |
| A3287 | U.V. Curable Printing Ink-Magenta, Flush Route (Minimum Pigment 17.4% + /- 1%) | 1 kg | 1. U.V. Flush Colour-Magenta (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate | 0.597 kg |
| 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate Expoy Acrylate | 0.175 kg |
| 3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate | 0.114 kg |
| 4. Photo Initiator Combo | 0.082 kg |
| 5. P.E.Wax | 0.0106 kg |
| 6. Fumed Silica/ Additive | 0.051 kg |
| A3288 | U.V. Curable Printing Ink-Cyan , Flush Route (Minimum Pigment 14.7% + /- 1%) | 1 kg | 1. U.V. Flush Colour-Cyan (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate) | 0.505 kg |
| 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate | 0.258 kg |
| 3. Reactive Monomer namely, Tri-Propylene, Glycol Diacrylate/ Tri Methylol propane ,Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate | 0.103 kg |
| 4. Photo Initiator Combo | 0.103 kg |
| 5. P.E.Wax | 0.011 kg |
| 6. Fumed Silica/ Additive | 0.051 kg |
| A3289 | U.V. Curable Printing Ink-Yellow, Flush Route (Minimum Pigment 10.2% + /- 1%) | 1 kg | 1. U.V. Flush Colour-Cyan (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/Acrylic Acrylate/ Epoxy Acrylate) | 0.351 kg |
| 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate | 0.412 kg |
| 3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate | 0.103 kg |
| 4. Photo Initiator Combo | 0.103 kg |
| 5. P.E.Wax | 0.011 kg |
| 6. Fumed Silica/ Additive | 0.051 kg |