Sl.No |
Description |
DEPB Rates (%) |
Value Cap |
(1) |
(2) |
(3) |
(4) |
1 |
All Aluminium Conductors (AAC) bare |
11.00 |
|
2 |
Aluminium Conductors Steel Reinforced (ACSR) |
13.00 |
|
3 |
Aluminium Conduit Bodies made of Aluminium and other alloying constituents |
9.00 |
|
4 |
Aluminium Flexible Tubing |
9.00 |
|
5 |
Deleted |
|
|
6 |
Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of |
9.00 |
|
7 |
Extruded Aluminium products including pipe and tubes |
9.00 |
|
8 |
Pressure Die Cast Articles of Aluminium |
9.00 |
|
9 |
Rolled Aluminium plates, sheets, strips including corrugated Aluminium sheets/strips |
9.00 |
|
10 |
11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 2 |
17.00 |
|
11 |
11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq. |
17.00 |
|
12 |
11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq. |
17.00 |
|
13 |
600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq |
17.00 |
|
14 |
600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq. |
17.00 |
|
15 |
600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq. |
17.00 |
|
16 |
600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq. |
17.00 |
|
17 |
600/1000 V Heat shrinkable straight joints for cable size 4 x 16 mm. sq. |
17.00 |
|
18 |
600/1000 V Outdoor overhead termination complete with cable lugs & armour clamping ring for 4 core c |
17.00 |
|
19 |
Electrical Wiring Accessories / Components wholly made of Brass |
14.00 |
|
20 |
Complete ceiling fan with metal blades(36"/42"/48"/56"/60") |
8.00 |
|
21 |
Electric Pedestal Fan |
13.00 |
|
22 |
Electric Table fans |
13.00 |
|
23 |
Fluorescent Tubes (18/20 /36/40 Watts) |
16.00 |
|
24 |
Galvanised transmission line towers and parts thereof |
15.00 |
Rs. 35.00 / K.G |
25 |
GLS Lamps (upto 100 Watts and below) |
16.00 |
|
26 |
H.P.M.V. Lamps (250 W) |
16.00 |
|
27 |
H.P.S.V Lamps (250 W) |
16.00 |
|
28 |
H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W) |
16.00 |
|
29 |
H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V) |
16.00 |
|
30 |
Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor. |
17.00 |
|
31 |
Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor |
17.00 |
|
32 |
Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor |
17.00 |
|
33 |
Marine Cable flexible Non Burning (TPR) 4 X 1.5 |
14.00 |
|
34 |
Marine Cable flexible Non Burning (TPR) 4 X 2.5 |
14.00 |
|
35 |
Marine Cable flexible Non Burning (TPR) 12 X 1.5 |
14.00 |
|
36 |
Marine Cable flexible Non Burning (TPR) 3 X 4.00 |
14.00 |
|
37 |
Marine Cable flexible Non Burning (TPR) 3 X 6.00 |
14.00 |
|
38 |
Marine Cable flexible Non Burning(TPR) 2 x 1.50 |
14.00 |
|
39 |
Marine Cable flexible Non Burning(TPR) 3 x 1.50 |
14.00 |
|
40 |
Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5 |
14.00 |
|
41 |
Marine Cable Non Burning for Stationary laying (PVC) 2 X 2.5 |
14.00 |
|
42 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 1.5 |
14.00 |
|
43 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 2.5 |
14.00 |
|
44 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 10.00 |
14.00 |
|
45 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 16.00 |
14.00 |
|
46 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 25.00 |
14.00 |
|
47 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 50.00 |
14.00 |
|
48 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 70.00 |
14.00 |
|
49 |
Marine Cable Non Burning for Stationary laying (PVC) 3 X 95.00 |
14.00 |
|
50 |
Marine Cable Non Burning for Stationary laying (PVC) 7 X 1.5 |
14.00 |
|
51 |
Marine Cable Non Burning for Stationary laying (PVC) 12 x 1.5 |
14.00 |
|
52 |
Out door weather proof light fitting with glass shell/Acrylic cover excluding automotive light fittings. |
13.00 |
|
53 |
Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC shroud and (with or without ring, lock nuts) |
13.00 |
|
54 |
Single Phase Electrical Energy Meter |
14.00 |
|
55 |
11 KV Straight Through Joints for XLPE Copper Cable size 3 x 95 Sq. mm. |
14.00 |
|
56 |
Starter Motor Armature for High Speed Vehicles, Cars, etc. |
12.00 |
|
57 |
Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps) |
14.00 |
|
58 |
Stator for Alternator for Medium Duty (12 Volts 95-105 Amps) |
14.00 |
|
59 |
Steel Welding Electrodes |
17.00 |
|
60 |
Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII |
7.00 |
|
61 |
Three Phase Electrical Energy Meter |
14.00 |
|
62 |
Tinned/Untinned copper cables lugs /sockets/ connections |
14.00 |
Rs. 260.00 / K.G |
63 |
Tinned/Untinned copper ferules |
14.00 |
Rs. 260.00 / K.G |
64 |
Tinned/Untinned copper terminals ends |
14.00 |
Rs. 260.00 / K.G |
65 |
Automotive Cast Products |
5.00 |
|
66A |
Nuts /Bolts/screws/ washers made of Alloy Steel including Stainless Steel |
15.00 |
Rs. 60.00 / K.G |
66B |
Nuts /Bolts/screws/ washers made of Non Alloy Steel |
15.00 |
Rs. 25.00 / K.G |
67A |
Bright bars made out of Stainless Steel. |
20.00 |
Rs. 90.00 / K.G |
67B |
Bright Bars made out of mild Steel |
14.00 |
Rs. 30.00 / K.G |
67C |
Bright bars made out of items other than Stainless Steel and mild steel |
14.00 |
Rs. 35.00 / K.G |
68A |
Carbon steel/Non Alloy Steel forgings (machined). |
20.00 |
Rs. 105.00 / K.G |
68B |
Alloy Steel forgings (machined) |
20.00 |
Rs. 175.00 / K.G |
68C |
Stainless Steel forgings (machined) |
20.00 |
Rs. 400.00 / K.G |
69A |
Carbon steel/Non Alloy Steel forgings (rough). |
20.00 |
Rs. 85.00 / K.G |
69B |
Alloy Steel forgings (rough) |
20.00 |
Rs. 125.00 / K.G |
69C |
Stainless Steel forgings (rough) |
20.00 |
Rs. 300.00 / K.G |
70A |
High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts- all varieties of Alloy Steel including Stainless steel |
12.00 |
Rs. 60.00 / K.G |
70B |
High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts- all varieties of Non Alloy Steel |
12.00 |
Rs. 25.00 / K.G |
71A |
Hot forged nut of Alloy Steel including stainless steel |
15.00 |
Rs. 60.00 / K.G |
71B |
Hot forged nut of Non Alloy Steel |
15.00 |
Rs. 25.00 / K.G |
72 |
Cast iron Products (Rough/Machined) not elsewhere specified |
10.00 |
|
73 |
Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or Steel |
14.00 |
Rs. 40.00 / K.G |
74 |
Chisels made of forging quality carbon steel |
14.00 |
|
75 |
Drop forged Pliers of Alloy/ Non-alloy steel |
14.00 |
|
76 |
Hand Drill |
15.00 |
|
77 |
High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile) |
14.00 |
|
78 |
Pipe Wrenches |
14.00 |
|
79 |
Punches |
14.00 |
|
80 |
Screw Drivers (Nickel plated) |
14.00 |
|
81 |
Spanners made of alloy/ Non-alloy steel |
14.00 |
|
82 |
Steel files of Alloy Steel |
14.00 |
|
83 |
Steel files of High Carbon Steel |
14.00 |
|
84 |
Steel Vices |
14.00 |
|
85 |
Cold Rolled Galvanised colour coated Non alloy steel sheets/hoops & Strips/Wide Coils (Plain/Corrugated) |
22.00 |
Rs. 29000.00 / M.T |
86 |
2" Galvanised flanges with rubber gaskets |
15.00 |
|
87 |
2" Galvanised/ Zinc Coated Bungs |
15.00 |
|
88 |
2" Galvanised/Zinc coated Flange |
15.00 |
|
89 |
3/4" Flanges with or without washer |
15.00 |
|
90 |
3/4" Galvanised bungs with rubber gaskets |
15.00 |
|
91 |
3/4" Galvanised flanges with rubber gaskets |
15.00 |
|
92 |
3/4" Galvanised/ Zinc coated Bungs |
15.00 |
|
93 |
3/4" Galvanised/ Zinc coated Flanges |
15.00 |
|
94 |
Adjustable Bracket made out of MS Sheet |
15.00 |
|
95 |
Wood to Steel Adapter (All Types) |
15.00 |
|
96 |
Aluminium collapsible tubes |
9.00 |
|
97 |
Aluminium Pencil Sharpner |
9.00 |
|
98 |
Aluminium rivets |
11.00 |
|
99 |
Aluminium Utensils with Interior PTFE Coating & Exterior painted (non-stick) with/ without handle. |
6.00 |
|
100 |
Animal Drawn Ploughs/ Parts Thereof |
13.00 |
|
101 |
Arm Blade |
17.00 |
Rs. 20.00 / K.G |
102 |
Aruvil Double Wheel Carrier kit Set |
16.00 |
|
103 |
Axes |
14.00 |
|
104 |
Ball Chain Cap |
12.00 |
|
105 |
Barb Arm |
16.00 |
|
106 |
Barb Arm Base |
12.00 |
|
107 |
Black Pipes/ tubes including Precision Tubes |
19.00 |
Rs. 20.00 / K.G |
108 |
Bottom/Top Plate UM-1 made of Tin Plate |
12.00 |
|
109 |
Box Hinge |
18.00 |
|
110 |
Brace Band |
18.00 |
|
111 |
Brace Rail End |
18.00 |
|
112A |
Nut milled from bar process of Alloy Steel including Stainless steel |
15.00 |
Rs. 60.00 / K.G |
112B |
Nut milled from bar process of Non Alloy Steel including |
15.00 |
Rs. 25.00 / K.G |
113 |
Brass Builder Hardware |
10.00 |
|
114 |
Brass Tubes |
16.00 |
Rs. 150.00 / K.G |
115 |
Brass valves |
10.00 |
|
116 |
Bull Dog Hinge |
16.00 |
|
117 |
Seamless/ Butt welded steel pipe fittings made from seamless/ERW steel tubes. |
17.00 |
Rs. 120.00 / K.G |
118 |
Cl Cistern |
10.00 |
|
119 |
CI Pipes and Fittings,not elsewhere specified |
10.00 |
|
120 |
Coil Spring/Helical coil spring |
15.00 |
Rs. 20.00 / K.G |
121 |
Collar |
19.00 |
|
122 |
Corner Arm |
17.00 |
|
123 |
Crow Bar /Wrecking Bar |
17.00 |
Rs. 35.00 / K.G |
124 |
Cultivator made of mild steel |
14.00 |
|
125 |
Cut Hand tacks made of M.S. Sheets |
14.00 |
|
126 |
Decorative Handicrafts/Artwares made of anodised aluminium |
6.00 |
|
127 |
Door/ Window/ ventilator Sections made of mild steel |
14.00 |
|
128 |
Double Carrier Wheel |
16.00 |
|
129 |
Drag Link Chain |
15.00 |
|
130 |
Ductile Iron Spun Pipes |
11.00 |
|
131 |
Electrolytic Tinplate components |
8.00 |
|
132 |
Elliptical /Oval Tin Plate container and/ or components thereof |
10.00 |
|
133 |
Deleted |
|
|
134 |
Female Hinge |
18.00 |
|
135 |
Flange Plate |
18.00 |
|
136 |
Floor Flange |
12.00 |
|
137 |
Fork |
17.00 |
|
138 |
Fork Digging with socket |
15.00 |
|
139 |
Galvanised Non-Alloy Steel Wire Ropes (wire steel core) |
14.00 |
|
140 |
Galvanised Non Alloy Steel Wire Ropes (fibre core) |
13.00 |
|
141 |
Galvanised Pipes/ tubes with wall thickness above 3mm to 4mm |
20.00 |
Rs. 20.00 / K.G |
142 |
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 1mm or below |
20.00 |
Rs. 20.00 / K.G |
143 |
Galvanised Pipes/ tubes conforming toASTM Specification with wall tickness above 1mm to 2mm |
20.00 |
Rs. 20.00 / K.G |
144 |
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 2mm to 3mm |
20.00 |
Rs. 20.00 / K.G |
145 |
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 3mm to 4m |
20.00 |
Rs. 20.00 / K.G |
146 |
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 4mm to 5mm |
20.00 |
Rs. 20.00 / K.G |
147 |
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 5mm and above |
20.00 |
Rs. 20.00 / K.G |
148 |
Galvanised Pipes/ tubes with wall thickness 1mm or below |
20.00 |
Rs. 20.00 / K.G |
149 |
Galvanised Pipes/ tubes with wall thickness above 1mm to 2mm |
20.00 |
Rs. 20.00 / K.G |
150 |
Galvanised Pipes/ tubes with wall thickness above 2mm to 3mm |
20.00 |
Rs. 20.00 / K.G |
151 |
Galvanised Pipes/ tubes with wall thickness above 4mm to 5mm |
20.00 |
Rs. 20.00 / K.G |
152 |
Galvanised Pipes/ tubes with wall thickness 5mm and above |
20.00 |
Rs. 20.00 / K.G |
153 |
Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3" |
18.00 |
Rs. 35.00 / K.G |
154 |
Gate Clip Made of Mild Steel |
18.00 |
|
155 |
Gate Hold Back Made of Mild Steel |
18.00 |
|
156 |
Gate Latch Made of Mild Steel |
18.00 |
|
157 |
Gun metal valves |
10.00 |
|
158 |
MS colour coated ghamla (made of HRsteel) |
15.00 |
|
159 |
Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator) |
5.00 |
|
160 |
Heavy duty Fork latch |
17.00 |
|
161 |
Deleted |
|
|
162 |
Deleted |
|
|
163 |
High Chromium Grinding media balls |
13.00 |
Rs. 35.00 / K.G |
164 |
Hot Dipped Galvanised Tension Bar/ Gate Rods/ Truss Rods/ Drop Rods. |
14.00 |
|
165 |
ILD Fork |
17.00 |
|
166 |
ILD Guide |
17.00 |
|
167 |
Industrial Offset Hinge |
17.00 |
|
168 |
Industrial Offset Bracket |
17.00 |
|
169 |
Industrial Locking Device |
17.00 |
|
170 |
J-Bracket |
17.00 |
|
171 |
Locks and valves water pipe fitting |
11.00 |
|
172 |
Loop Cap Made of Mild Steel |
12.00 |
|
173 |
LPG Cylinders with valves |
14.00 |
|
174 |
Male Hinge/ Male Bracket Made of Mild Steel |
16.00 |
|
175 |
Male Lag Bracket Made of Mild Steel |
14.00 |
|
176 |
Marine freight containers of type ICC 20`x8`x8.5` |
20.00 |
|
177 |
MS Paper pin & Clip |
17.00 |
Rs. 40.00 / K.G |
178 |
Steel Needle Screws Self colour or Plated |
14.00 |
|
179 |
Nickel Plated M S Buckles |
15.00 |
|
180 |
Offset Rail End |
19.00 |
|
181 |
OTS Cans/ dingeley cans |
12.00 |
|
182 |
Oxygen Cylinder dia 140 NF |
16.00 |
|
183 |
Oxygen Cylinder dia 229 MM |
16.00 |
|
184 |
Deleted |
|
|
185 |
Photo frame (Brass) |
11.00 |
|
186 |
Presensitised Positive Offset Aluminium plates |
11.00 |
|
187 |
Pressure Stoves/ kerosene burners/ pressure lamps/blow lamps/ pressure lanterns/ fancy light fittings made of brass |
10.00 |
|
188 |
Rail End |
20.00 |
|
189 |
Rakes/Garden Rakes/ Fork Manure hooks made of Iron and/or Steel |
18.00 |
|
190 |
Rectangular/ Square Tin Plate container and/ or components thereof |
10.00 |
|
191 |
Rectangular/Square Tin Plate container and/or component thereof with round neck. |
10.00 |
|
192 |
Rings, Lid and Tagger assemblies (with or without matching bottom piece) |
10.00 |
|
193 |
Deleted |
|
|
194 |
Sanitary and bathroom fittings (of brass) |
10.00 |
|
195 |
Sanitary and bathroom fittings (of gun metal) |
10.00 |
|
196 |
Shovels/Spades made of iron and/or steel, with or without Handle, irrespective of what material the Handle may have been made of. |
15.00 |
|
197 |
Folding bed made of Mild Steel |
12.00 |
|
198 |
Sleeve Made of Mild Steel |
19.00 |
|
199 |
Sleeve Bracket Made of Mild Steel |
19.00 |
|
200 |
Stainless Steel safety razor Blades |
11.00 |
|
201 |
Stainless Steel Vacuum Flask |
12.00 |
|
202 |
Stainless steel wire rope |
14.00 |
|
203 |
Stapler |
7.00 |
|
204 |
Steel Clamp (Galvanised and Ungalvanised) |
17.00 |
|
205 |
Steel pegs |
15.00 |
|
206 |
Steel Weld mesh |
17.00 |
Rs. 55.00 / K.G |
207 |
Steel Stranded Wire |
16.00 |
Rs. 26.00 / K.G |
208 |
Surgical blades other than made of High Carbon Steel |
13.00 |
|
209 |
Surgical blades made of High Carbon Steel |
13.00 |
|
210 |
Table Pencil Sharpener made of Plastic |
11.00 |
|
211 |
Tension Band |
17.00 |
|
212 |
Tiller Left Hand or Right Hand |
13.00 |
|
213 |
Top and Bottom cover of Round Battery Jacket made from Tin plate |
6.00 |
|
214 |
Tower Crane |
17.00 |
|
215 |
Track Wheel |
17.00 |
|
216 |
Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/ Razor Box (1 Razor handle + 5 twin blades in a magazing both packed in a plastic box)/ Razor card (1 Razor handle + 5 twin blades in a magazine bubbled and fixed on a card)/ Magazine (5 twin blades packed in a magazine) |
12.00 |
|
217 |
Twin type shaving system Razor/ Razor Handle |
9.00 |
|
218 |
U-Bolt |
15.00 |
|
219 |
Deleted |
|
|
220 |
Universal Bracket |
16.00 |
|
221 |
Valve for LPG Cylinder, Hand wheel type, made of Brass |
8.00 |
|
222 |
Water meters of outer casing made of brass. |
8.00 |
|
223 |
Steel Wire Nails |
13.00 |
|
224 |
Wood screws made of steel, self colour or plated |
13.00 |
|
225 |
Zinc plated (Galvanised) conduit Hanger |
14.00 |
|
226 |
Ball/ Roller/Thrust/ clutch release/ spherical plain Bearing |
12.00 |
Rs. 600.00 / K.G |
227 |
Bench Grinder 6" |
7.00 |
|
228 |
Brazed Carbide Tools |
14.00 |
|
229 |
Brazed Tools Carbide Tips |
14.00 |
|
230 |
Pneumatic Tool. |
11.00 |
|
231 |
Cutting Tools of High speed Steel (Cobalt Grade) |
8.00 |
|
232 |
Cutting tools of High Speed Steel (Non-Cobalt Grade) |
8.00 |
|
233A |
Casing Pipes conforming to API Specification 5CT or equivalent of OD 114 mm to 508 mm (4 to 20 ) made of Seamless Steel Pipes |
20.00 |
Rs. 130.00 / K.G |
233B |
Casing Pipes conforming to API Specification 5CT or equivalent of OD 114 mm to 508 mm (4 to 20 ) made of ERW Steel Pipes |
17.00 |
Rs. 40.00 / K.G |
233C |
Tubing/Hollow Drill Rods/ Coupling/ Core Barrels and substitutes made out of Carbon Steel Seamless Tube/ Pipe |
17.00 |
Rs. 130.00 / K.G |
234 |
Drills/Reamers End Mills/ Broaches Milling cutters including Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade). |
12.00 |
|
235 |
Drills/Reamers End Mills/Breaches/ Milling cutters including Threading Tools/ Taps of high speed (Cobalt Grade) |
12.00 |
|
236 |
Pneumatic Rivetting Hammer |
10.00 |
|
237 |
Resin bonded diamond wheels |
6.00 |
|
238 |
Saws/ Segments made from high speed steel strips/ sheets |
8.00 |
|
239 |
Front Engined Three Wheeler Drive away Chassis in CKD/SKD/CBU condition |
17.00 |
|
240 |
Rear / Front Engine Auto Rikshaw in CKD/SKD/CBU condition |
17.00 |
|
241 |
Scooter (in CBU/SKD/CKD condition) |
17.00 |
|
242 |
Motor Cycle (in CBU/SKD/CKD condition) |
17.00 |
|
243 |
Moped (in CBU/SKD/CKD condition) |
17.00 |
|
244 |
Alternator Assembly |
14.00 |
|
245 |
Steel Anchor Pin |
16.00 |
|
246 |
Armature for Delcoremy type motor |
14.00 |
|
247 |
Armature for Dynamo |
14.00 |
|
248 |
Starter Motor Armature for Low Speed Vehicles |
11.00 |
|
249 |
Automobile Tyre-Tube Valves |
16.00 |
|
250 |
BB Axle |
17.00 |
|
251 |
Brake shoe plate |
19.00 |
|
252 |
Cam |
15.00 |
|
253 |
Cam Shaft |
15.00 |
|
254 |
CBH plate for starter motor |
15.00 |
|
255 |
Commutator |
14.00 |
|
256 |
Cone Sleeve/Axle Stud sleeve |
16.00 |
|
257 |
Connecting Rods |
9.00 |
|
258 |
Cotter pin made of steel of any quality |
17.00 |
|
259 |
Crank for chain wheel |
15.00 |
|
260 |
Crank Shaft (for four wheelers) |
14.00 |
|
261 |
Crank Shaft (for two wheelers) |
14.00 |
|
262 |
Crank-shaft Forgings/ connecting rod forgings |
14.00 |
|
263 |
Deep Well Hand pump complete without connecting Rods with/ without spares & Tools |
18.00 |
|
264 |
Deepwell hand pump with connecting rods. |
18.00 |
|
265 |
Draw bars |
15.00 |
|
266 |
Drive assembly for starter motor |
14.00 |
|
267 |
End-Cap Assembly |
12.00 |
|
268 |
Field Coil for Starter Motor |
14.00 |
|
269 |
Flex Plate Assembly |
13.00 |
|
270 |
Flywheel Starter Ring Gear |
13.00 |
|
271 |
Front Axle beam/I-Beam |
17.00 |
|
272 |
Front/Rear axle shaft |
17.00 |
|
273 |
Full Tension Sleeve Made of Steel |
11.00 |
|
274A |
Galvanised Spokes |
16.00 |
|
274B |
Galvanised Spokes (for bicycle spokes) |
16.00 |
Rs. 85.00 / Gross |
275 |
Generator (Dynamo) Assembly |
14.00 |
|
276 |
Half Collets for engine valves |
12.00 |
|
277 |
Deleted |
|
|
278 |
Steel Hub Bolts |
13.00 |
|
279 |
Steel Hub cone |
13.00 |
|
280 |
Ignition Coil oil filled |
15.00 |
|
281 |
Ignition Coil Resin Cost |
15.00 |
|
282 |
Inlet exhaust valves |
14.00 |
|
283 |
Integral Shaft Water Pump bearing for automotive applications |
17.00 |
|
284 |
King pin made out of steel |
13.00 |
|
285 |
Laminated Leaf Springs / Springs |
12.00 |
|
286 |
Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition |
11.00 |
|
287 |
Machined trailor ball/hitch pin/linkage pin |
15.00 |
|
288 |
Nozzles made of steel |
11.00 |
|
289 |
Oil Bath Gear case |
12.00 |
|
290 |
Piston Pin/ Gudgeon Pin |
11.00 |
|
291 |
Push rod |
13.00 |
|
292 |
Rear Axle Assembly for LCV/HCV (Assembly/SKD) |
15.00 |
|
293 |
Rocker Arm/ Rocker Shaft made of steel |
14.00 |
|
294 |
Roller for auto break shoe |
17.00 |
|
295 |
Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing. |
14.00 |
|
296 |
Sleeve Shaft and/or Ball Joint |
11.00 |
|
297 |
Slip Ring |
10.00 |
|
298 |
Slip Stub Shaft |
11.00 |
|
299 |
Solenoid Switch Pre-engaged type |
13.00 |
|
300 |
Solenoid Swtich Co-axial type |
13.00 |
|
301 |
Spindles made of steel |
11.00 |
|
302 |
Sprocket with central axle |
12.00 |
|
303 |
Starter motor with maximum current upto 1100 Amps |
12.00 |
|
304 |
Stator for alternator for Light Duty (12 Volts 60-95 Amps) |
13.00 |
|
305 |
Submersible Water pump sets i.e. Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes |
16.00 |
|
306 |
Valve Tappets |
13.00 |
|
307 |
Voltage Regulator |
8.00 |
|
308 |
Aluminium Ingots |
5.00 |
|
309 |
Aluminium Sow Ingots |
5.00 |
|
310 |
Aluminium Wire Bar/ Rod |
5.00 |
|
311 |
Brass Washers of all types |
10.00 |
|
312 |
Brass Wood Screw |
12.00 |
|
313 |
Calcined Alumina |
11.00 |
|
314 |
Copper flats/ Sheets/ Strips |
12.00 |
|
315 |
Copper Foils |
12.00 |
|
316 |
Lead Antimony Wire |
14.00 |
|
317 |
Phosphor Bronze fabric |
14.00 |
|
318 |
Pressure Die Cast article made of Zinc |
16.00 |
Rs. 60.00 / K.G |
319 |
Tin Ingots |
4.00 |
|
320 |
Valve Stems made of brass |
7.00 |
|
321 |
Magnetic assemblies incorporating cast alloy permanent magnets viz. Pot magnets, magnetic welding clamps/ links, Magnetic lifting devices, magnetic racks/ vices/door catches/ vee blocks bases/ hold rast |
9.00 |
|
322 |
Galvanised/ ungalvanised spikes for use as Railway Track material |
17.00 |
|
323 |
Gear cutting tools of cobalt bearing high speed steel |
8.00 |
|
324 |
Industrial diamond prod. Diamond grinding wheels/ diamond file and tools |
6.00 |
|
325 |
Aluminium pistons, in fully machined conditions |
9.00 |
|
326 |
Ferro Chrome/ Charge Chrome |
12.00 |
|
327 |
Ferro Manganese (Fe Mn) |
12.00 |
|
328 |
Ferro Silicon (Fe Si) |
12.00 |
|
329 |
Cold Rolled Galvanised Non Alloy Steel Sheet/Hoops and Strips/ Wide Coils/ Circles (Plain/Corrugated) |
20.00 |
Rs. 25500.00 / M.T |
330 |
Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron) |
7.00 |
|
331 |
Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco |
18.00 |
|
332 |
High Alumina (bubble alumina based) Bricks & Shapes and/or castable and mortars |
13.00 |
|
333 |
High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars |
13.00 |
|
334 |
High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars |
13.00 |
|
335 |
High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars |
13.00 |
|
336 |
High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products |
17.00 |
|
337 |
High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products |
17.00 |
|
338 |
Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars |
17.00 |
Rs. 14000.00 / M.T |
339 |
Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars |
17.00 |
Rs. 33000.00 / M.T |
340 |
Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars |
17.00 |
Rs. 21000.00 / M.T |
341 |
Non alloy steel wire coated / plated or otherwise |
17.00 |
Rs. 30.00 / K.G |
342 |
Hot rolled galvanised Non alloy steel sheet/hoops & strips/wide coils (Plain/ Corrugated) |
15.00 |
|
343 |
Non-alloy steel ingots, billets, blooms and slabs |
15.00 |
|
344 |
Alloy steel wires coated/ plated or otherwise |
15.00 |
Rs. 35.00 / K.G |
345 |
Non-alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechanically treated reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers |
13.00 |
Rs. 25.00 / K.G |
346 |
Magnesite Bricks and shapes and/or Ramming Mass, Castables and Mortars |
17.00 |
Rs. 21000.00 / M.T |
347 |
Silico Manganese (Si Mn) |
13.00 |
|
348 |
Stainless steel wires |
15.00 |
|
349 |
CR Stainless Steel Sheets/ Hoops & Strips/ Wide-Coils/ Circles with/without annealing/skin passing. |
17.00 |
|
350 |
Hot Rolled Non Alloy Steel Plates/Wide Coils/ Sheets/hoops & Strips (including skelp) |
19.00 |
|
351 |
Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% carbon (produced by Silico Thermic Reduction Process) |
14.00 |
|
352 |
Ferro Molybdenum (60-65% Molybdenum) |
12.00 |
|
353 |
Table, Kitchen and other household articles made of Stainless Steel with or without handle, irrespective of what material the handle may have been made of |
20.00 |
Rs. 125.00 / K.G |
354 |
Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of |
20.00 |
Rs. 125.00 / K.G |
355 |
Aluminium artware |
8.00 |
|
356 |
Aluminium circles/slugs |
9.00 |
|
357 |
11 KV, Indoor Vacuum circuit Breaker Panels |
14.00 |
|
358 |
CRGO Transformer Lamination (Core Laminations) |
17.00 |
Rs. 40.00 / K.G |
359 |
11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm. |
17.00 |
|
360 |
Cast Iron Wheel |
11.00 |
|
361 |
Cold Rolled painted/ coated High Tensile steel strapping |
20.00 |
Rs. 29.00 / K.G |
362 |
Ferrous Investment & Precision castings |
10.00 |
|
363 |
Manhole Cover |
11.00 |
|
364 |
Sanitary casting |
11.00 |
|
365A |
Forged Steel ball made of mild steel/ non-alloy steel |
17.00 |
Rs. 80.00 / K.G |
365B |
Forged Steel ball made of alloy steel |
17.00 |
Rs. 100.00 / K.G |
365C |
Forged Steel ball made of Stainless Steel |
17.00 |
Rs. 175.00 / K.G |
366 |
Thermostatic type Bimetal/Trimetal Strip of Various Grades |
15.00 |
|
367 |
Cast Iron Weights |
11.00 |
|
368 |
Cast Iron Vice |
14.00 |
|
369 |
Hacksaw Frame |
12.00 |
|
370 |
Automatic Socks Knitting Machine (Mechanical) |
15.00 |
|
371 |
Computerised Automatic Power Socks Knitting Machine |
15.00 |
|
372 |
Hydraulic End Cap |
13.00 |
|
373 |
Injection moulding machine parts: Deckel /Cover |
13.00 |
|
374 |
Injection Piston |
13.00 |
|
375 |
Plates Injection cylinder |
13.00 |
|
376 |
Speed Frame Drafting System |
10.00 |
|
377 |
Tail Stocks Made of Steel |
13.00 |
|
378 |
Textile Spindle upper part |
14.00 |
|
379 |
Textile spindle with insert |
14.00 |
|
380 |
Thrust housing Made of Steel |
13.00 |
|
381 |
Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/ Billets/ Slabs), Bars and Rods (including Rounds/ Flats/ Hexagon/ Octagon Wire rods etc) Angles, Shapes & Sections (Including Special Profiles) , Plates, Hot Rolled Sheets/ Hoops and Strips (Including Skelp)/ Wide Coils |
12.00 |
|
382 |
Alumina Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars |
14.00 |
|
383 |
Alumina Carbon/ Slide Gate Plate Refractory and Attachments |
14.00 |
|
384 |
Alumina Fused Cast Refractories |
14.00 |
|
385 |
Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars |
17.00 |
Rs. 14000.00 / M.T |
386 |
Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron) |
7.00 |
|
387 |
Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non-Alloy/Alloy Steel (excluding Stainless Steel) Sheets/ Hoops and Strips/ Wide-Coils, including CRCA. |
18.00 |
|
388 |
Iron Ore pellets (from Limonite Ore) |
7.00 |
|
389 |
Iron Ore Pellets. (from Haematite Ore) |
7.00 |
|
390 |
Stainless Steel Ingots, Semis (Blooms/ Billets/ Slabs) Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Channels, Special Profiles), Plates / HR Sheets/ Hoops and Strips (Including Skelp) /Wide Coil. |
15.00 |
|
391 |
Pig Iron / Hot metal |
9.00 |
|
392 |
Alumina Carbon Continuous Casting Refractories and/or Mortars |
14.00 |
|
393 |
2" Bungs with or without Washer/Gasket |
15.00 |
|
394 |
2" Flanges with or without Washer/Gasket |
15.00 |
|
395 |
Bolt Axle Made of Steel |
13.00 |
|
396 |
Boulevard Clamp Made of Steel |
16.00 |
|
397 |
Box Girders for Bridges |
14.00 |
|
398 |
Clevis |
16.00 |
Rs. 40.00 / K.G |
399A |
Hoe Blade |
12.00 |
|
399B |
Eye |
12.00 |
|
400 |
Articles manufactured out of GP Sheets not elsewhere specified |
14.00 |
Rs. 30.00 / K.G |
401 |
Articles manufactured out of tin plate prime quality not elsewhere specified |
10.00 |
|
402 |
Postcap |
10.00 |
|
403 |
Rectangular tops made of electrolytic tin plate fitted with screw neck & handle and bottoms |
10.00 |
|
404 |
Round tops/ ends (bottoms) of containers made of tin plate |
10.00 |
|
405 |
Rubberised Wheel made of Mild steel |
19.00 |
|
406 |
Mild Steel Scrool |
19.00 |
|
407 |
Vertical Arm made of mild steel |
19.00 |
Rs. 25.00 / K.G |
408 |
Y Arm Made of Steel |
19.00 |
Rs. 25.00 / K.G |
409 |
Slitting cutters made of steel |
8.00 |
|
410 |
Forged Crank Shaft ( Made Of Alloy/ Non Alloy Steel) |
15.00 |
|
411 |
Front Axle Beam-Forging |
15.00 |
|
412 |
Forged Crank Shaft Fully Machined (Made Of Alloy /Non Alloy Steel) |
15.00 |
|
413 |
Front Axle Beam-Fully Machined |
15.00 |
|
414 |
MS Window , Doors , Ventilators, Grate, Grille, fabricated, frames and Components parts thereof |
16.00 |
Rs. 25.00 / K.G |
415 |
Non Alloy Steel Flanges/ Couplings / Tees/Elbows |
14.00 |
|
416 |
Seamless Stainless Steel Tubes (Cold Finished) |
17.00 |
Rs. 80.00 / K.G |
417A |
Fully Threaded Rod made of non-alloy steel/ mild steel (Galvanised/ Ungalvanised) |
18.00 |
Rs. 20.00 / K.G |
417B |
Fully Threaded Rod made of Alloy Steel including Stainless Steel |
18.00 |
Rs. 90.00 / K.G |
418 |
PTFE Cables |
14.00 |
|
419 |
Silica Bricks/Shapes for BF Stoves |
14.00 |
|
420 |
Silica Bricks/Shapes for coke ovens |
14.00 |
|
421 |
Silica Mortar |
2.00 |
|
422 |
Stainless Steel Couplings/ Tees/ Elbows |
17.00 |
|
423 |
Chains (110 Links) Weight: 34 gms for Item 1, 81 gms for Item No. 2) |
9.00 |
|
424 |
Manganese Steel Cast Articles(rough/machined) |
15.00 |
|
425 |
Non Alloy Steel Castings Rough/ machined |
12.00 |
|
426 |
Spheroidal graphite/Ductile iron cast articles including pipes and fittings (rough/machined) |
11.00 |
|
427 |
Copper Bonded Grounding Rods |
14.00 |
|
428 |
Bearing Races |
6.00 |
|
429 |
Carbon/ Non alloy Steel Seamless pipes/Tube (Cold Finish or otherwise) |
15.00 |
|
430 |
Alloy Steel Seamless pipes/ Tube (Cold Finish or otherwise) |
16.00 |
Rs. 55.00 / K.G |
431 |
Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS HR Plates/ Sheets/ Coils/Strips |
11.00 |
|
432 |
Industrial Roller/Motorcycle/Automotive timing Chain (all types including spares) |
9.00 |
|
433 |
Industrial Valve (Cast or Forged Body) |
7.00 |
|
434 |
MS Bucket Handles duly Nickel Plated |
12.00 |
|
435 |
Perforated Construction Stakes (Round/ Flat/ Square) |
11.00 |
|
436 |
Printed Lug Cap With Internal Coating Lined With PVC Compound |
6.00 |
|
437 |
Steel Hinges-Bar Type |
11.00 |
Rs. 20.00 /K.G |
438 |
Zinc Plated (Galvanised) Steel Lock Nuts (Blanked/Punched) from H.R.Coil/ Sheet |
14.00 |
Rs. 150.00 / K.G |
439 |
Automotive Water Pump |
7.00 |
|
440 |
Clutch Cover Assembly |
7.00 |
|
441 |
Clutch Plate/Disc Assembly/Driven plate |
7.00 |
|
442 |
Spline Hubs for clutch plate |
7.00 |
|
443 |
Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised |
9.00 |
|
444 |
Tractor Parts-Ratchet Jack Assembly |
10.00 |
|
445 |
Brass Wire |
14.00 |
|
446 |
Stainless steel rough/machined castings |
16.00 |
|
447 |
Aluminium foil commercial grade, embossed/ non embossed, cut to Shape, pre-formed, with/without coating, with/without printing, with/without reinforcing material |
9.00 |
|
448 |
Aluminium Foil Paper backed |
9.00 |
|
449 |
Aluminium Foil Plastic Coated/ Laminated |
9.00 |
|
450 |
Aluminium Foil-Synthetic Resin/ Lacquer Coated Printed |
9.00 |
|
451 |
Aluminium Foil-Synthetic Resin/ Lacquer Coated |
9.00 |
|
452 |
9 KV 5 KVA Conventional Surge arrester distribution type with Mounting Breenet and Insulators |
14.00 |
|
453 |
Non-Alloy Ground/ Earthing Rods (Galvanised) |
15.00 |
|
454 |
Stainless Steel Cable Ties made of SS.316 Grade |
2.00 |
|
455 |
Alloy Steel Castings (Rough/machined) |
10.00 |
|
456 |
Galvanised Steel Wire Strand |
14.00 |
|
457 |
Anchor Bolt With Nut |
11.00 |
|
458 |
Ferro Vanadium |
14.00 |
|
459 |
Magnesium Ferro Silicon |
16.00 |
|
460 |
Cable Ties made of Stainless Steel |
2.00 |
|
461 |
Pilfer Proof Caps/ Seals –Printed with EP Liner |
15.00 |
|
462 |
Pole Line Hardware fittings and Accessories (Galvanised) |
15.00 |
|
463 |
Carbon steel submerged arc welded pipes as per API grade/ASIM grade or equivalent or hot formed Steel bends as per API, ASTM grade or equivalent degree: 0-180 degree. |
17.00 |
Rs. 27000.00 / M.T |
464 |
Machined /Cold rolled/ Cold formed ring for bearing races & CV Cages |
14.00 |
|
465 |
CRCA butt hinges |
6.00 |
|
466 |
CRCA hinges electric brass plated |
6.00 |
|
467 |
CRCA hinges self colour |
6.00 |
|
468 |
CRCA hinges zinc plated |
6.00 |
|
469 |
TEE Hinges (painted/ zinc plated) Made of Steel |
7.00 |
|
470 |
Transformer (copper wound) above 100 KVA upto and including 400 KVA 3 phased, oil cooled. |
14.00 |
|
471 |
Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled. |
14.00 |
|
472 |
Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled. |
14.00 |
|
473 |
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs ± 5% per Sq.Mtr. |
15.00 |
Rs. 34000.00 / M.T |
474 |
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr. |
15.00 |
Rs. 34000.00 / M.T |
475 |
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr. |
15.00 |
Rs. 34000.00 / M.T |
476 |
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr. |
15.00 |
Rs. 34000.00 / M.T |
477 |
Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter |
14.00 |
|
478 |
Electric door bell |
14.00 |
|
479 |
Steel tapes/rules (1 meter to 50 meters) |
7.00 |
|
480 |
Ceramic coated steel pipes with or without coupling |
14.00 |
|
481 |
Cryogenic tanks for liquified gases |
9.00 |
|
482 |
Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB |
11.00 |
|
483 |
Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5-2.5%, carbon 1.5-2.5% balance iron |
10.00 |
|
484 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14 |
5.00 |
|
485 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy GA-17G/A-17X |
5.00 |
|
486 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-30/KS-30/F14/SAE/48/ SL |
5.00 |
|
487 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L-200/G-24/SAE-15 |
5.00 |
|
488 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-10/L.S 10/G-46/SAE-797 / SY/F-100/F-59 |
5.00 |
|
489 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper Lead Alloy of GS-23/L.S-23/G-48/SAE-799/SX/F-250/F-7 |
5.00 |
|
490 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP |
5.00 |
|
491 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy SL/KS/30/GS/30/F-14/SAE 48/SP/KS 25/GS 25/G 41/F 770 –780/H 24/F 112/ SAE 49/ SY/F 100/ HF 2 /LS/F-770/SL/KS30/GS30/F-14 |
5.00 |
|
492 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/SL/KS30/GS30/F-14 |
5.00 |
|
493 |
Deleted |
|
|
494 |
Deleted |
|
|
495 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based F-820/ or F-157/ TR-20/GA 20/A 20/G 74/SAE 783/AS 15/ GA 17G/A 17X/A6/GA 6/A300/ G73/ SAE 770-780 |
5.00 |
|
496 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Based Alloy GA 6/A6/G 73/A 300/SAE 770/AS11 |
5.00 |
|
497 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based High Tin Alloy F-780/SP/H24/GS25/KS25/G-41/ SAE-49 |
5.00 |
|
498 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F100/SY/HF2/LS10/ GS10/ Glyco-46/SAE/797 |
5.00 |
|
499 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-250/SX/HF 16 or H-116 L.S-23/GS-23/Glyco-48/ SA-794 |
5.00 |
|
500 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783 |
5.00 |
|
501 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770 |
5.00 |
|
502 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/G-32/B-100/SAE-12 |
5.00 |
|
503 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13 |
5.00 |
|
504 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/ GA-20/A-20/G-74/SAE-783/AS-15/ GA-17G/A-17X |
5.00 |
|
505 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy AL-6 |
5.00 |
|
506 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Lead Alloy F-66/AL-6M |
5.00 |
|
507 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2 |
5.00 |
|
508 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/GL-13/L-100/F-99/SAE-13/GM-155 |
5.00 |
|
509 |
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41 |
5.00 |
|
510 |
Metallurgical coke |
4.00 |
|
511 |
Chain wheel |
14.00 |
|
512 |
Multispeed free wheel |
12.00 |
|
513 |
Welded steel pipe |
11.00 |
|
514 |
Bronze/Gun Metals impellers for pumps, all types |
5.00 |
|
515 |
Taper roller bearing |
8.00 |
|
516 |
Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever |
8.00 |
|
517 |
Cast iron parts for sewing machine namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft |
2.00 |
|
518 |
Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for Feed Fork, Needle Bar, Screw and Nut for C.C Rod, Shuttle Race top spring, O/S Rock shaft |
14.00 |
|
519 |
Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover |
5.00 |
|
520 |
Portable bag closure machine |
6.00 |
|
521 |
Submersible pumps |
16.00 |
|
522 |
Non alloy steel forged (machined) hammers upto 10 kg. piece wt. Without handle or with handle made of steel/wood/rubber gripped steel pipe. |
12.00 |
|
523 |
Chain wheel and Crank set |
14.00 |
|
524 |
Triple chain wheel and crank set |
14.00 |
|
525 |
Multi cylinder fuel injection pumps for diesel engines |
12.00 |
|
526 |
Single phase motor |
7.00 |
|
527 |
Automotive Oil filters/fuel filter |
7.00 |
|
528 |
Aluminium Alloy Billets |
4.00 |
|
529 |
Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. |
9.00 |
|
530 |
Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. |
9.00 |
|
531 |
Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. |
6.00 |
|
532 |
Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process not elsewhere specified. |
6.00 |
|
533 |
Identifiable ready to use machined parts/components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. |
6.00 |
|
534 |
Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. |
10.00 |
|
535 |
Brake Drums made of Alloy Cast Iron |
13.00 |
|
536 |
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA. |
11.00 |
|
537 |
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA. |
11.00 |
|
538 |
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA. |
11.00 |
|
539 |
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA. |
11.00 |
|
540 |
Nut and Shaft Assembly for Automobile. |
7.00 |
|
541 |
Paper Punches |
8.00 |
|
542 |
Truck & Trailer Wheels. |
16.00 |
|
543A |
Carbon Steel Forged Flanges |
15.00 |
|
543B |
Alloy Steel (Including Stainless Steel) Forged Flanges |
15.00 |
|
544 |
Electrode holder mainly made of copper or brass |
9.00 |
|
545 |
Staples/Staples in strips made of wholly galvanised steel wire |
9.00 |
|
546 |
Disc Horn |
15.00 |
|
547 |
Stainless Steel casseroles |
6.00 |
|
548 |
Handle Bar Switch |
15.00 |
|
549 |
Grip for Handle Bar |
9.00 |
|
550 |
Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW |
18.00 |
|
551 |
Rear Axle Housing Assembly for LCV/ HCV |
15.00 |
|
552 |
Constant Temperature Baths |
6.00 |
|
553 |
Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/ 27 |
7.00 |
|
554 |
Earth Moving Wheel having diameter not less than 25" |
17.00 |
|
555 |
Sewing Machine Part-shuttle hook |
13.00 |
|
556 |
Cold Rolled Alloy/ Non Alloy Steel Hardened and Tempered Saw Blades |
3.00 |
|
557 |
Electrical Wiring Accessories / Components made of Phosphors Bronze |
14.00 |
|
558 |
Textile Machinery Spare Parts-Perforated Nickel Screen |
3.00 |
|
559 |
PCB Routers |
5.00 |
|
560 |
Electrolytic Tin Plate |
19.00 |
|
561 |
Plastic Extrusion Plant and Machinery |
10.00 |
|
562 |
Automobile Locks other than Ignition Locks |
12.00 |
Rs. 300.00 / K.G |
563 |
Automobile Ignition Locks |
12.00 |
Rs. 300.00 / K.G |
564 |
Aluminium Oxide Resin Disc. |
7.00 |
Rs. 8.00 / Piece |
565 |
Endless coated Zircon Cloth Belts |
13.00 |
Rs. 330.00 / Sq. metre |
566 |
Non-cast Hardware Fittings made of Stainless Steel Rod, Grade 304 |
11.00 |
Rs. 250.00 / K.G |
567 |
FTL Caps |
13.00 |
Rs. 350.00 / K.G |
568 |
Vetrified Grinding Wheel |
7.00 |
|
569 |
PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 MM dia to 6.5 MM dia |
12.00 |
|
570 |
Hypodermic needle(Disposable) |
4.00 |
|
571 |
Spheroidal Graphite Quality/Steel Quality/Alloy IC Quality/ ICDP Quality/Hig Chrome Quality ROLLS FOR ROLLING MILLS |
12.00 |
|
572 |
Watch Dials made out of Nickel Silver Brass Strip |
17.00 |
Rs. 27.00 / Piece |
573 |
Steel cops/Pirn/Bobbins |
15.00 |
Rs. 30.00 / K.G |
574 |
Hermetically Sealed Compressors for Airconditioners using R-22 refrigerant gas having cooling capacity - K Cal 3400/4790/5214/6350 per hour |
15.00 |
Rs. 5000.00 / Piece |
575 |
Agricultural sprinkler mainly made of Brass |
5.00 |
|
576 |
Earth Moving Wheel components (using HR sections) namely Bead Seat Ring, Fixed Flange and gutter Band |
17.00 |
Rs. 80.00 / K.G |
577 |
Earth Moving wheel components (using HR Plates) namely loose Flange side Ring and detachable Flange |
14.00 |
|
578 |
Chrome/ Nickel Plated wire wheel for all types of cars |
14.00 |
|
579 |
Shock Absorber |
8.00 |
|
580 |
Power Take Offs/ Clutches |
3.00 |
|
581 |
Shoulder Bolt made out of CHQ Alloy Steel/ Stainless Steel |
7.00 |
Rs. 800.00 / K.G |
582 |
Dowell Pin made out of CHQ Alloy Steel/ Stainless Steel |
12.00 |
Rs. 400.00 / K.G |