Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

PUBLIC NOTICE NO. 61(RE-02), DT. 03/02/2003

Amendments/ Addition in SION

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-3133, new entries at Sl. No. A-3134 to A-3140 shall be added as per Annexure ”B” to this Public Notice.

ELECTRONIC PRODUCTS

After the existing entry at Sl.No.B-257, new entry at Sl. No. B-258 shall be added as per Annexure ”C” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1858, new entries at Sl.No.C-1859 to C-1862 shall be added as per Annexure ”D” to this Public Notice.

PLASTIC PRODUCTS

After the existing entry at Sl.No.H-519, new entries at Sl. No. H-520 to H-524 shall be added as per Annexure ”E” to this Public Notice.

5. This issues in public interest.

(L. MANSINGH)
DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the
Public Notice No. 61
Dated: 03/02/2003

AMENDMENTS/CORRECTIONS

Sl. No. Page No. Reference Amendments/Corrections
1 2 3 4
1. 59 Chemicals & Allied Products Sl.No.A321 The description of import item at sl. No.1 (with quantity) shall be amended to read as under:-

“1. 3,5 Lutidine 2.18 kg
OR

2,3,5 Trimethyl Pyridine” 2.45 kg
2. 59 Chemicals & Allied Products Sl.No.A323 The description of import item at sl. No.1 (with quantity) shall be amended to read as under:-
“1. 3,5 Lutidine 0.18 kg
OR

2,3,5 Trimethyl Pyridine” 0.21 kg
3. 148 Chemicals & Allied Products Sl.No.A1089 After import item at Sl. No. 1, the additional import item (with quantity) shall be added:-
“2. Furnace Oil 0.383 Litres”
4. 232 Chemicals & Allied Products Sl.No.A1805 After import item at Sl. No. 3, the following additional import item (with quantity) shall be added:-
“4. Furnace Oil 350 Litre”
5. 326 Chemicals & Allied Products Sl.No.A2532 The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Metallurgical Grade Silicon”
6. 340 Chemicals & Allied Products Sl.No.A2684 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2684 2 Chloro Methyl 3,5 Dimethyl 4 Methoxy Pyridine Hcl 1 kg 1. 3,5 Lutidine

OR 1.77 kg
1. 2,3,5 Trimethyl Pyridine 2.00 kg
2. Methylene Chloride 7.83 kg
3. Methanol/ Diemthyl Formamide 4.14 kg
4. Acetone/IPA 2.07 kg
5. Activatted Carbon 0.100 kg
7. 341 Chemicals & Allied Products Sl.No.A2691 The note below this entry shall be replaced by the following note:-

“Note: This norm is valid upto 31.03.2003.”
8. 341 Chemicals & Allied Products Sl.No.A2692 The note below this entry shall be replaced by the following note:-

“Note: This norm is valid upto 31.03.2003.”
9. 341 Chemicals & Allied Products Sl.No.A2693 The note below this entry shall be replaced by the following note:-

“Note: This norm is valid upto 31.03.2003.”
10. 401 Electronics Product Sl.No.B53 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
B53 Electronic Capacitor Grade Metalised Dielectric Plastic (Polypropylene) Film 1 MT 1. Plain Polypropylene Film 1.2 MT
2. Super pure aluminium wire of purity 99.9% or above

OR 37 kg
2. Super pure aluminium wire of purity 99.9% or above

OR 8 kg
2. Zinc Rod of purity 99.9% or above 29 kg
3. Evaporation Boat 12 Pcs.
4. Kapton Bend 0.30 kg
5. Difusion pump Oil 0.7 kg
6. Masking Band/Silicon Oil 0.7 kg
7. B.N. Suspension 1.0 kg
8. Graphite Foil 1 Sq.meter
11. 504 - 505 Engineering Product Sl.No.C177 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
12. 505 Engineering Product Sl.No.C178 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
13. 505 Engineering Product Sl.No.C179 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
14. 505 Engineering Product Sl.No.C180 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
15. 505 Engineering Product Sl.No.C181 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
16. 506 Engineering Product Sl.No.C182 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
17. 506 Engineering Product Sl.No.C183 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
18. 506 Engineering Product Sl.No.C184 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
19. 506 - 507 Engineering Product Sl.No.C185 The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
20. 531 Engineering Product Sl.No.C274 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C274 Radiators for Transformers (made out of CRCA Steel Sheet/Coil 1 kg 1. CRCA Non-alloy Steel Sheets/ Coils 1.05 kg/kg
21. 754 - 755 Engineering Product Sl.No.C1285 After Foot Note No. 3, the following foot Note shall be added:-

“Note: 4. Wherever there is export of Ball Bearing with Housing, after ascertaining the weight of the Ball Bearing, the import of input maybe allowed applying relevant SION at C-1280 to1285”
22. 869 -870 Engineering Product Sl.No.C1742 1. The description of import item at Sl. No. 20, shall be amended (without any change in quantity) to read as under:-

“Welding Electrodes and or Welding Wire”

2. A Foot Note below this entry shall be added as under:-

“Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to the quantity of Welding Wire.”
23. 964 Plastic Products Sl.No.H-19 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-19 Anion Exchange Resin 1 kg 1. Styrene 0.435 kg
2. Divinyl Benzene Monomer 0.030 kg
3. Ethylene Dichloride 0.975 kg
4. Polyvinyl Alcohol 0.1755 kg
5. Methanol Formaldehyde Solution

OR 0.788 kg
a) Methanol 0.448 kg
b) Paraformaldehyde 0.330 kg
6. Dimethyl Ethanol Amine 0.275 kg
24. 965 Plastic Products Sl.No.H-28 The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“Polycarbonate Resin/ Moulding Powder/ Granules”
25. 965 Plastic Products Sl.No.H-29 The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“Polycarbonate Resin/ Moulding Powder/ Granules”
26. 968 Plastic Products Sl.No.H-45 After the import item at Sl. No.1 the following additional import item (with quantity) shall be added:-
“2. High Speed Diesel 0.533 Litre”
27. 1022 Plastic Products Sl.No.H-333 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-333 Twine/Rope made of HDPE/PP 1 kg 1. Relevant HDPE/ PP Granules/ Chips 1.07 kg/kg content in the export product
Note : In case of export of Coloured items, relevant coloured Master Batches shall also be allowed as an additional input @ 0.02 kg/kg weight of Polymer and accordingly the quantity of relevant Polymer shall be reduced to1.05 kg/kg content in the export product.
28. 1044-1045 Plastic Products Sl.No.H-461 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-461 Prepared Adhesives based on Plastics (Two component Laminating Adhesives)

A. Adhesive (Polyurethane Solution containing 60% Resin content and 40% Solvent)

OR 1 kg 1. Adipic Acid 0.090 kg
2. Isophthalic Acid 0.258 kg
3. Mono Ethylene Glycol 0.050 kg
4. Diethylene Glycol 0.195 kg
5. 1,6-Hexane Diol 0.015 kg
6. Toluene Di-iso-cyanate 0.035 kg
7. EthylAcetate/ Methyl Ethyl Ketone (relevant) 0.400 kg
B. 1.Additive (Poly Isocyanate Solution containing 50% Solid and 50% Solvent) 1 kg 1. Adipic Acid 0.012 kg
2. Isophthalic Acid 0.037 kg
3. Mono Ethylene Glycol 0.032 kg
4. Diethylene Glycol 0.060 kg
5. 1,6-Hexane Diol 0.002 kg
6. Toluene Di-iso-cyanate 0.372 kg
7. Ethyl Acetate/ Methyl Ethyl Ketone (relevant) 0.500 kg
B.2. Additive (Polyester Solution containing 50% Resin content and 50% Ethyl Acetate) 1 kg 1. Adipic Acid 0.385 kg
1. Diethylene Glycol 0.165 kg
2. Ethyl Acetate 0.500 kg
29. 29 Plastic Products Sl.No.H-487 (Notified vide Public Notice No. 20 Dated:01/07/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-487 Vinyl Acetate Co-polymer Emulsion Stabilized with Colloid 1 kg A) For Solid content 54+/-1%
1. Vinyl Acetate Monomer 0.315 kg
2. Hydroxy Ethyl Cellulose 0.018 kg
OR

B) For Solid content 48+/-1%
1. Vinyl Acetate Monomer 0.294 kg
2. Hydroxy Ethyl Cellulose 0.019 kg
Note: The two variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declaration.
30. 30 Plastic Products Sl.No.H-491 (Notified vide Public Notice No. 20 Dated:01/07/2002) The description of export item shall be amended to read as under:-

“Ethyl Acrylate and Methaacrylic Acid copolymer emulsion having solids 29+/-1% stabilized with emulsifier”
31. 30 Plastic Products Sl.No.H-492 (Notified vide Public Notice No. 20 Dated:01/07/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-492 Styrene and Acrylate Co-polymer Emulsion Stabilized with Emulsifier 1 kg A) For 50+/-1% Solid content
1. Styrene 0.231 kg
2. Butyl Acrylate 0.239 kg
3. Acrylic Acid 0.012 kg
4. Acryl Amide 0.007 kg
OR

B) For 50+/-1% Solid content
1. Styrene 0.185 kg
2. Butyl Acrylate 0.117 kg
3. Ethyl Acrylate 0.167 kg
OR

C) For 47+/-1% Solid content
1. Styrene 0.281 kg
2. Butyl Acrylate 0.149 kg
Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A, B or C as per applicants declaration.
32. 31 Plastic Products Sl.No.H-498 (Notified vide Public Notice No. 20 Dated:01/07/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-498 Ethyl Acrylate and Methyl Methacrylate Copolymer Emulsion having Solid content 5+/-1% Stabilized with Emulsifier 1 kg 1. Ethyl Acrylate 0.482 kg
2. Itacnoic Acid 0.010 kg
3. Methyl Metha Acrylate 0.055 kg
33. 31 Plastic Products Sl.No.H-499 (Notified vide Public Notice No. 20 Dated:01/07/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-499 Synthetic Tanning Agent-Metha acrylic Acid Homopolymer aqueous solution

A. Solid content 30+/-1%

OR

B. Solid content 40+/-1% 1 kg A. Metha Acrylic Acid

OR 0.212 kg
B. Metha Acrylic Acid 0.335 kg
Note : The inputs quantities of Metha acrylic acid are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declarations.

Annexure “B” to the
Public Notice No. 61
Dated: 03/02/2003
CHEMICALS AND ALLIED PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
A3134 1-Ethyl 5-Carbamoyl 6-Hydroxy 4-Methyl-3-Sulfomethyl-2- Pyridone 1 kg 1. Aceto Acetic Methyl Ester 0.696 kg
2. Mono Ethyl Amine (70%) 0.580 kg
3. Methyl Cyano Acetate 0.571 kg
A3135 Blend of Sodium Salt of Polymer of Naphthalene Sulfonic Acid with Formaldehyde and Aromatic Di-basic Salt (Active content 60%) 1 kg 1. Crude Naphthalene 0.220 kg
A3136 Azidothymidine (Zidovudine BP) 1 kg 1. Betathymidine 2.05 kg
2. Trityl Chloride 2.80 kg
3. Methane Sulfonide Chloride 1.47 kg
4. Sodium Azide 1.59 kg
5. Tert. Butyl Amine 3.50 kg
6. Triethyl Amine 3.69 kg
7. 1,4-Dioxane/ Toluene 5.50 kg
8. Diemethyl Sulfoxide/ Methanol 7.00 kg
9. Methylene Chloride/ Dimethyl Formamide 5.33 kg
A3137 2,4-0-BIS (Trimethyl Silyl) –6-0-Methyl Erthromycin-A9-(0-1- Methoxy-1-Methyl Ethyl Oxime) 1 kg 1. Erthromycin Base (on 100% Activity Basis) 1.055 kg
2. 2-Methoxy propene 0.333 kg
3. Pyridine Hydrobromide 0.212 kg
4. Hexa Methyl Di Silazane 0.356 kg
5. Hydroxylamine Hcl 0.50 kg
6. Dimethyl Sulfoxide/ Methanol 3.27 kg
7. MTBE/Methylene Chloride 7.03 kg
8. Methyl Iodide or Iodine 0.237 kg
9. Triethylamine 0.30 kg
A3138 Hepatitis-B vaccine (rDNA) BP (Adult) 10 ML-10 Doses 1 lakh Vials (10 ML, 10 Doses) 1. Hapatitis B Bulk Protein (H BsAg Protein) 0.04347 kgs
2. Aluminium Hydroxide Gel 3% 0.83160 kgs
3. Thiomersal 0.06930 kgs
4. Glass Vials 115,000 Nos
5. Rubber Stoppers 110,000 Nos
6. Aluminium Caps/ Seals 110,000 Nos
7. Cold Chain Monitor Cards 117 Nos
A3139 Citolopram Hydro Bromide 1 kg 1. 5-Bromo Phthalide 4.19 kg
2. 1-Bromo 4-Fluoro Benzene 4.31 kg
3. 3-Diemthyl Amino Propyl Chloride Hcl 2.35 kg
4. Tetrahydrofuran 25.63 kg
5. Sulfolane 1.98 kg
A3140 Chlorine 1 kg 1. Furnace Oil 0.269 Litres

Annexure “C” to the
Public Notice No. 61
Dated: 03/02/2003
ELECTRONICS PRODUCT
Sl.No. Export Item Qty. Import Item Qty. Allowed
B-258 Electronic Capacitor Grade Metalised Dielectric Plastic (Polyester) Film 1 MT 1. Plain Polyester Film 1.2 MT
2. Super Pure Aluminium wire of purity 99.9% or above 28 kg
3. Graphite Foil 1 sq.mtr.
4. Evaporation Boat 8 Nos.
5. Boron Nitride Suspension 1 kg
6. Fomblin Oil 1 kg

Annexure “D” to the
Public Notice No. 61
Dated: 03/02/2003
ENGINEERING PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1859 Aluminium Redrawn Alloy Tube/Pipes 1 kg 1. Aluminium Extruded Hollow Alloy Tubes/ Pipes 1.02 kg
C1860 Transformer MS Tank/Clamps 1 kg 1. HR Non-Alloy Steel Sheet/Wide Coil 0.945 kg
2. Polyurethane Epoxy Paint

3. Zinc Rich Epoxy Primer Upto 4% of FOB value of export
C1861 Circles (Circular Blank/ Disc) made of CR Non-alloy Steel Sheets/ Strips/Wide Coils 1 kg 3. Relevant Cold Rolled (including CRCA/CRCA-Skin Passed / Temper Passed) Non-alloy Steel Strips/Wide Coils 1.16 kg
4. VCI/ Rusto Paper As per Packing policy
5. Steel Strapping As per Packing policy
C1862 Automobile Radiator Parts made of Brass 2 kg 1. Brass Sheet 1.05 kg/kg content in the export product
2. Brass Pipe 1.01 kg/kg content in the export product
3. Brass Rod 1.05 kg/kg content in the export product

Annexure “E” to the
Public Notice No. 61
Dated: 03/02/2003
PLASTIC PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
H520 Vinyl Acetate Homo-polymer Emulsions Stabilized by colloids 1 kg A) For Solid content 44%
1. Vinyl Acetate Monomer 0.408 kg
2. Poly Vinyl Alcohol 0.024 kg
OR

B) For Solid content 46%
1. Vinyl Acetate Monomer 0.364 kg
2. Poly Vinyl Alcohol 0.021 kg
3. Diethylene Glycol Dibenzoate 0.109 kg
OR

C) For Solid content 40%
1. Vinyl Acetate Monomer 0.373 kg
2. Poly Vinyl Alcohol 0.052 kg
Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A,B or C as per applicants declaration.
H521 Ethyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 45+/-1% Stabilized with Emulsifier 1 kg 1. Ethyl Acrylate 0.249 kg
2. Acrylonitrile 0.143 kg
3. Acrylamide 0.028 kg
4. Acrylic Acid 0.004 kg
H522 Synthetic Tanning Agent-Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1% 1 kg 1. Acrylic Acid 0.180 kg
2. Acrylonitrile 0.103 kg
H523 Synthetic Tanning Agent-Metha Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1% 1 kg 1. Metha Acrylic Acid 0.168 kg
2. Acrylonitrile 0.023 kg
H524 Polyurethane Based Adhesive having Solid content 11.5+/-0.5% kg 1 kg 1. Polyurethane Resins 0.095 kg
Note : For any variation in the Solid content the imported raw material content shall be worked out on pro-rata basis.
Presented by eximkey.com

Sl. No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	59	Chemicals & Allied Products Sl.No.A321	The description of import item at sl. No.1 (with quantity) shall be amended to read as under:-
“1. 3,5 Lutidine	2.18 kg
OR 2,3,5 Trimethyl Pyridine”	2.45 kg
2.	59	Chemicals & Allied Products Sl.No.A323	The description of import item at sl. No.1 (with quantity) shall be amended to read as under:-
“1. 3,5 Lutidine	0.18 kg
OR 2,3,5 Trimethyl Pyridine”	0.21 kg
3.	148	Chemicals & Allied Products Sl.No.A1089	After import item at Sl. No. 1, the additional import item (with quantity) shall be added:-
“2. Furnace Oil	0.383 Litres”
4.	232	Chemicals & Allied Products Sl.No.A1805	After import item at Sl. No. 3, the following additional import item (with quantity) shall be added:-
“4. Furnace Oil	350 Litre”
5.	326	Chemicals & Allied Products Sl.No.A2532	The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “Metallurgical Grade Silicon”
6.	340	Chemicals & Allied Products Sl.No.A2684	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2684	2 Chloro Methyl 3,5 Dimethyl 4 Methoxy Pyridine Hcl	1 kg	1. 3,5 Lutidine OR	1.77 kg
1. 2,3,5 Trimethyl Pyridine	2.00 kg
2. Methylene Chloride	7.83 kg
3. Methanol/ Diemthyl Formamide	4.14 kg
4. Acetone/IPA	2.07 kg
5. Activatted Carbon	0.100 kg
7.	341	Chemicals & Allied Products Sl.No.A2691	The note below this entry shall be replaced by the following note:- “Note: This norm is valid upto 31.03.2003.”
8.	341	Chemicals & Allied Products Sl.No.A2692	The note below this entry shall be replaced by the following note:- “Note: This norm is valid upto 31.03.2003.”
9.	341	Chemicals & Allied Products Sl.No.A2693	The note below this entry shall be replaced by the following note:- “Note: This norm is valid upto 31.03.2003.”
10.	401	Electronics Product Sl.No.B53	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
B53	Electronic Capacitor Grade Metalised Dielectric Plastic (Polypropylene) Film	1 MT	1. Plain Polypropylene Film	1.2 MT
2. Super pure aluminium wire of purity 99.9% or above OR	37 kg
2. Super pure aluminium wire of purity 99.9% or above OR	8 kg
2. Zinc Rod of purity 99.9% or above	29 kg
3. Evaporation Boat	12 Pcs.
4. Kapton Bend	0.30 kg
5. Difusion pump Oil	0.7 kg
6. Masking Band/Silicon Oil	0.7 kg
7. B.N. Suspension	1.0 kg
8. Graphite Foil	1 Sq.meter
11.	504 - 505	Engineering Product Sl.No.C177	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
12.	505	Engineering Product Sl.No.C178	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
13.	505	Engineering Product Sl.No.C179	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
14.	505	Engineering Product Sl.No.C180	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
15.	505	Engineering Product Sl.No.C181	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
16.	506	Engineering Product Sl.No.C182	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
17.	506	Engineering Product Sl.No.C183	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
18.	506	Engineering Product Sl.No.C184	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
19.	506 - 507	Engineering Product Sl.No.C185	The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:- “CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”
20.	531	Engineering Product Sl.No.C274	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C274	Radiators for Transformers (made out of CRCA Steel Sheet/Coil	1 kg	1. CRCA Non-alloy Steel Sheets/ Coils	1.05 kg/kg
21.	754 - 755	Engineering Product Sl.No.C1285	After Foot Note No. 3, the following foot Note shall be added:- “Note: 4. Wherever there is export of Ball Bearing with Housing, after ascertaining the weight of the Ball Bearing, the import of input maybe allowed applying relevant SION at C-1280 to1285”
22.	869 -870	Engineering Product Sl.No.C1742	1. The description of import item at Sl. No. 20, shall be amended (without any change in quantity) to read as under:- “Welding Electrodes and or Welding Wire” 2. A Foot Note below this entry shall be added as under:- “Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to the quantity of Welding Wire.”
23.	964	Plastic Products Sl.No.H-19	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-19	Anion Exchange Resin	1 kg	1. Styrene	0.435 kg
2. Divinyl Benzene Monomer	0.030 kg
3. Ethylene Dichloride	0.975 kg
4. Polyvinyl Alcohol	0.1755 kg
5. Methanol Formaldehyde Solution OR	0.788 kg
a) Methanol	0.448 kg
b) Paraformaldehyde	0.330 kg
6. Dimethyl Ethanol Amine	0.275 kg
24.	965	Plastic Products Sl.No.H-28	The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- “Polycarbonate Resin/ Moulding Powder/ Granules”
25.	965	Plastic Products Sl.No.H-29	The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- “Polycarbonate Resin/ Moulding Powder/ Granules”
26.	968	Plastic Products Sl.No.H-45	After the import item at Sl. No.1 the following additional import item (with quantity) shall be added:-
“2. High Speed Diesel	0.533 Litre”
27.	1022	Plastic Products Sl.No.H-333	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-333	Twine/Rope made of HDPE/PP	1 kg	1. Relevant HDPE/ PP Granules/ Chips	1.07 kg/kg content in the export product
Note : In case of export of Coloured items, relevant coloured Master Batches shall also be allowed as an additional input @ 0.02 kg/kg weight of Polymer and accordingly the quantity of relevant Polymer shall be reduced to1.05 kg/kg content in the export product.
28.	1044-1045	Plastic Products Sl.No.H-461	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-461	Prepared Adhesives based on Plastics (Two component Laminating Adhesives) A. Adhesive (Polyurethane Solution containing 60% Resin content and 40% Solvent) OR	1 kg	1. Adipic Acid	0.090 kg
2. Isophthalic Acid	0.258 kg
3. Mono Ethylene Glycol	0.050 kg
4. Diethylene Glycol	0.195 kg
5. 1,6-Hexane Diol	0.015 kg
6. Toluene Di-iso-cyanate	0.035 kg
7. EthylAcetate/ Methyl Ethyl Ketone (relevant)	0.400 kg
B. 1.Additive (Poly Isocyanate Solution containing 50% Solid and 50% Solvent)	1 kg	1. Adipic Acid	0.012 kg
2. Isophthalic Acid	0.037 kg
3. Mono Ethylene Glycol	0.032 kg
4. Diethylene Glycol	0.060 kg
5. 1,6-Hexane Diol	0.002 kg
6. Toluene Di-iso-cyanate	0.372 kg
7. Ethyl Acetate/ Methyl Ethyl Ketone (relevant)	0.500 kg
B.2. Additive (Polyester Solution containing 50% Resin content and 50% Ethyl Acetate)	1 kg	1. Adipic Acid	0.385 kg
1. Diethylene Glycol	0.165 kg
2. Ethyl Acetate	0.500 kg
29.	29	Plastic Products Sl.No.H-487 (Notified vide Public Notice No. 20 Dated:01/07/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-487	Vinyl Acetate Co-polymer Emulsion Stabilized with Colloid	1 kg	A) For Solid content 54+/-1%
1. Vinyl Acetate Monomer	0.315 kg
2. Hydroxy Ethyl Cellulose	0.018 kg
OR B) For Solid content 48+/-1%
1. Vinyl Acetate Monomer	0.294 kg
2. Hydroxy Ethyl Cellulose	0.019 kg
Note: The two variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declaration.
30.	30	Plastic Products Sl.No.H-491 (Notified vide Public Notice No. 20 Dated:01/07/2002)	The description of export item shall be amended to read as under:- “Ethyl Acrylate and Methaacrylic Acid copolymer emulsion having solids 29+/-1% stabilized with emulsifier”
31.	30	Plastic Products Sl.No.H-492 (Notified vide Public Notice No. 20 Dated:01/07/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-492	Styrene and Acrylate Co-polymer Emulsion Stabilized with Emulsifier	1 kg	A) For 50+/-1% Solid content
1. Styrene	0.231 kg
2. Butyl Acrylate	0.239 kg
3. Acrylic Acid	0.012 kg
4. Acryl Amide	0.007 kg
OR B) For 50+/-1% Solid content
1. Styrene	0.185 kg
2. Butyl Acrylate	0.117 kg
3. Ethyl Acrylate	0.167 kg
OR C) For 47+/-1% Solid content
1. Styrene	0.281 kg
2. Butyl Acrylate	0.149 kg
Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A, B or C as per applicants declaration.
32.	31	Plastic Products Sl.No.H-498 (Notified vide Public Notice No. 20 Dated:01/07/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-498	Ethyl Acrylate and Methyl Methacrylate Copolymer Emulsion having Solid content 5+/-1% Stabilized with Emulsifier	1 kg	1. Ethyl Acrylate	0.482 kg
2. Itacnoic Acid	0.010 kg
3. Methyl Metha Acrylate	0.055 kg
33.	31	Plastic Products Sl.No.H-499 (Notified vide Public Notice No. 20 Dated:01/07/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-499	Synthetic Tanning Agent-Metha acrylic Acid Homopolymer aqueous solution A. Solid content 30+/-1% OR B. Solid content 40+/-1%	1 kg	A. Metha Acrylic Acid OR	0.212 kg
B. Metha Acrylic Acid	0.335 kg
Note : The inputs quantities of Metha acrylic acid are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declarations.

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3134	1-Ethyl 5-Carbamoyl 6-Hydroxy 4-Methyl-3-Sulfomethyl-2- Pyridone	1 kg	1. Aceto Acetic Methyl Ester	0.696 kg
2. Mono Ethyl Amine (70%)	0.580 kg
3. Methyl Cyano Acetate	0.571 kg
A3135	Blend of Sodium Salt of Polymer of Naphthalene Sulfonic Acid with Formaldehyde and Aromatic Di-basic Salt (Active content 60%)	1 kg	1. Crude Naphthalene	0.220 kg
A3136	Azidothymidine (Zidovudine BP)	1 kg	1. Betathymidine	2.05 kg
2. Trityl Chloride	2.80 kg
3. Methane Sulfonide Chloride	1.47 kg
4. Sodium Azide	1.59 kg
5. Tert. Butyl Amine	3.50 kg
6. Triethyl Amine	3.69 kg
7. 1,4-Dioxane/ Toluene	5.50 kg
8. Diemethyl Sulfoxide/ Methanol	7.00 kg
9. Methylene Chloride/ Dimethyl Formamide	5.33 kg
A3137	2,4-0-BIS (Trimethyl Silyl) –6-0-Methyl Erthromycin-A9-(0-1- Methoxy-1-Methyl Ethyl Oxime)	1 kg	1. Erthromycin Base (on 100% Activity Basis)	1.055 kg
2. 2-Methoxy propene	0.333 kg
3. Pyridine Hydrobromide	0.212 kg
4. Hexa Methyl Di Silazane	0.356 kg
5. Hydroxylamine Hcl	0.50 kg
6. Dimethyl Sulfoxide/ Methanol	3.27 kg
7. MTBE/Methylene Chloride	7.03 kg
8. Methyl Iodide or Iodine	0.237 kg
9. Triethylamine	0.30 kg
A3138	Hepatitis-B vaccine (rDNA) BP (Adult) 10 ML-10 Doses	1 lakh Vials (10 ML, 10 Doses)	1. Hapatitis B Bulk Protein (H BsAg Protein)	0.04347 kgs
2. Aluminium Hydroxide Gel 3%	0.83160 kgs
3. Thiomersal	0.06930 kgs
4. Glass Vials	115,000 Nos
5. Rubber Stoppers	110,000 Nos
6. Aluminium Caps/ Seals	110,000 Nos
7. Cold Chain Monitor Cards	117 Nos
A3139	Citolopram Hydro Bromide	1 kg	1. 5-Bromo Phthalide	4.19 kg
2. 1-Bromo 4-Fluoro Benzene	4.31 kg
3. 3-Diemthyl Amino Propyl Chloride Hcl	2.35 kg
4. Tetrahydrofuran	25.63 kg
5. Sulfolane	1.98 kg
A3140	Chlorine	1 kg	1. Furnace Oil	0.269 Litres

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
B-258	Electronic Capacitor Grade Metalised Dielectric Plastic (Polyester) Film	1 MT	1. Plain Polyester Film	1.2 MT
2. Super Pure Aluminium wire of purity 99.9% or above	28 kg
3. Graphite Foil	1 sq.mtr.
4. Evaporation Boat	8 Nos.
5. Boron Nitride Suspension	1 kg
6. Fomblin Oil	1 kg

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1859	Aluminium Redrawn Alloy Tube/Pipes	1 kg	1. Aluminium Extruded Hollow Alloy Tubes/ Pipes	1.02 kg
C1860	Transformer MS Tank/Clamps	1 kg	1. HR Non-Alloy Steel Sheet/Wide Coil	0.945 kg
2. Polyurethane Epoxy Paint 3. Zinc Rich Epoxy Primer	Upto 4% of FOB value of export
C1861	Circles (Circular Blank/ Disc) made of CR Non-alloy Steel Sheets/ Strips/Wide Coils	1 kg	3. Relevant Cold Rolled (including CRCA/CRCA-Skin Passed / Temper Passed) Non-alloy Steel Strips/Wide Coils	1.16 kg
4. VCI/ Rusto Paper	As per Packing policy
5. Steel Strapping	As per Packing policy
C1862	Automobile Radiator Parts made of Brass	2 kg	1. Brass Sheet	1.05 kg/kg content in the export product
2. Brass Pipe	1.01 kg/kg content in the export product
3. Brass Rod	1.05 kg/kg content in the export product

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H520	Vinyl Acetate Homo-polymer Emulsions Stabilized by colloids	1 kg	A) For Solid content 44%
1. Vinyl Acetate Monomer	0.408 kg
2. Poly Vinyl Alcohol	0.024 kg
OR B) For Solid content 46%
1. Vinyl Acetate Monomer	0.364 kg
2. Poly Vinyl Alcohol	0.021 kg
3. Diethylene Glycol Dibenzoate	0.109 kg
OR C) For Solid content 40%
1. Vinyl Acetate Monomer	0.373 kg
2. Poly Vinyl Alcohol	0.052 kg
Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A,B or C as per applicants declaration.
H521	Ethyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 45+/-1% Stabilized with Emulsifier	1 kg	1. Ethyl Acrylate	0.249 kg
2. Acrylonitrile	0.143 kg
3. Acrylamide	0.028 kg
4. Acrylic Acid	0.004 kg
H522	Synthetic Tanning Agent-Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1%	1 kg	1. Acrylic Acid	0.180 kg
2. Acrylonitrile	0.103 kg
H523	Synthetic Tanning Agent-Metha Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1%	1 kg	1. Metha Acrylic Acid	0.168 kg
2. Acrylonitrile	0.023 kg
H524	Polyurethane Based Adhesive having Solid content 11.5+/-0.5% kg	1 kg	1. Polyurethane Resins	0.095 kg
Note : For any variation in the Solid content the imported raw material content shall be worked out on pro-rata basis.

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password

Register now Free ? Forgot Password ?

Follow us on :