Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl.No.A-3016, the new entries at Sl.No.A-3017 to A-3034 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1798, the new entries at Sl.No.C-1799 to C-1809 shall be added as per Annexure ”C” to this Public Notice.
After the existing entry at Sl.No.K-152, the new entries at Sl.No.K-153 to K-154 shall be added as per Annexure ”D” to this Public Notice.
5. This issues in public interest.
( L. MANSINGH)
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 37
Dated: 03/10/2002
| Sl. No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 197 | Chemicals & Allied Products Sl.No.A1640 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A1640 | Monoceotophos 40% WSC (Monocotophos 40% SL) | 1 kg | 1. Mono methyl Aceto Acetamide 70% min. (MMAA) | 0.432 kg |
2. Trimethyl Phosphite
OR | 0.356 kg |
| 2(a)Yellow/White Phophorus | 0.128 kg |
| 2(b)Methanol | 0.355 kg |
3. Methanol (as solvent)
OR | 0.179 kg |
| 3. Ethylene Dichloride | 0.120 kg |
| 4. Cyclohexanone | 0.412 kg |
| 2. | 241 | Chemicals & Allied Products Sl.No.A1875 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A1875 | Upgraded Beneficiated (Synthetic Rutile) containing Titanium Dioxide 95% | 1 kg | 1. Ilmenite Ore containing Titanium Dioxide 54% | 2.0 kg |
| 2. Coke | 0.182 kg |
| 3. | 267 | Chemicals & Allied Products Sl.No.A2101 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2101 | Metoprolol Tartrate | 1 kg | 1. 4-Methoxy Ethyl Phenol | 0.77 kg |
| 2. Epichlorohydrin | 0.70 kg |
| 3. Mono isopropyl Amine | 1.50 kg |
| 4. Tartaric Acid | 0.24 kg |
| 4. | 4-5 | Chemicals & Allied Products Sl.No.A2030 (as amended vide Public Notice No. 27 Dated:01.08.2002) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2030 | Phenidone A (1-phenyl, 3-Pyrazolidone) | 1 kg | 1. Phenyl Hydrazine
OR | 1.124 kg |
| a) Aniline | 1.137 kg |
| b) Sodium Nitrite | 0.830 kg |
| 2. Acrylamide | 1.0 kg |
| 3. Caustic Soda | 1.15 kg |
| 4. Isopropyl Alcohol | 1.00 kg |
| 5. | 482 | Engineering Product Sl.No.C27 | The quantity of import item at. Sl. No. 1 shall be amended to read as under:- |
| 1. Aluminium Scrap | 1.10 MT/MT of Aluminium content in the export product |
OR
1. Aluminium Ingot | 1.06 MT/MT of Aluminium content in the export product |
| 6. | 705 | Engineering Product Sl.No.C1052 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C1052 | Inlet/ Exhaust Valves | 1 kg | 1. Valve Steel (Alloy Steel/ Non-Alloy Steel) Bars | 1.40 kg/kg content in the export product |
OR
1. Inconel Alloy 75 1 Bars | 1.20 kg/kg content in the export product |
| 2. Hard Facing Metal Alloy Powder of Grade Ni60, Stellite 1, 6 and 12 | 10 gms/valve |
| 7. | 705 | Engineering Product Sl.No.C1053 | The norm covered by this entry shall be deleted. |
| 8. | 746 | Engineering Product Sl.No.C1214 | The description of export item shall be amended to read as under:-
“Valve Stems made of Brass” |
| 9. | 766 | Engineering Product Sl.No.C1341 | The norm covered by this entry shall be deleted. |
| 10. | 780 | Engineering Product Sl.No.C1382 | The description of export item shall be amended to read as under:-
“Armoured / Un-armoured PVC Insulated Submersible/Flexible / Control Purpose Copper Cable rating upto 1100 volts, not elsewhere specified” |
| 11. | 781 | Engineering Product Sl.No.C1390 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C1390 | Aluminium Gravity Die Cast Articles | 1 MT | 1. Aluminium Scrap | 1.10 MT/MT content of Aluminium in export product |
OR
1. Aluminium Ingots | 1.06 MT/MT content of Aluminium in export product |
| 12. | 851 | Engineering Product Sl.No.C1661 | After the description of import item at Sl. No. 4, (with quantity) the following new import item shall be added:- |
| 5. Relevant Screw | 1 No. on net to net basis” |
| 13. | 24 | Engineering Product Sl.No.C1784 (amended vide Public Notice No. 20 Dated:01/07/2002) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C1784 | Pest Repellent Model POBD-1-01 | 1 No. | 1. Relevant Capacitor | Net to net |
| 2. Relevant Varistor | Net to net |
| 3. Relevant Triac | Net to net |
| 4. Relevant Resistors | Net to net |
| 5. Zinner | 1 No. (Net to net) |
| 6. Light Connector | 1 No. (Net to net) |
| 7. EL Display | 1 No. (Net to net) |
| 8. Polycarbonate Compound | 1.05 kg/kg content in the export product |
| 9. Copper Wire (Super Enamelled) | 0.17 kg/kg content in the export product |
| 10. Copper Clad Laminates | 1.01 kg/kg content in the export product |
| 11. Imaging/ Photo printing Dry Film Photo resists | 1.05 kg/kg content in the export product |
| 12. Solder Mask Ink-cum- Catalyst/ Hardner | 1.05 kg/kg content in the export product |
| 13. Relevant Microchip | 1 No. |
| 14. | 907 | Food Product Sl.No.E-11 | The description of export item shall be amended to read as under:-
“Fruit Slices and other edible products/ Chutneys/Condiment Paste/Vegetables/ Pickles packed in OTS Cans / Glass containers/ packed in relevant packing material” |
| 15. | 1015 | Plastic Products Sl.No.H-304 | The description of import items at Sl. Nos. 1 & 2, (without any change in quantity) shall be amended to read as under:-
“1. Spectacle Front of relevant Brand / make with or without metal fittings
2. Spectacle Sides of relevant Brand / make with or without noted fittings” |
| 16. | 33 | Plastic Products Sl.No.H-507 (as notified vide Public Notice No. 20 Dated:01/07/2002) | 1. The description of export item shall be amended to read as under:-
“Fragrant & Designed Polypropylene Mat”
2. The quantity of import item at Sl. No. 4 shall be amended to read as under:-
“94 kgs and cif value upto 20% of FOB value of export”
3. The quantity of import item at Sl. No. 6 shall be amended to read as under:-
“2 Nos.” |
| 17. | 34 | Textile Products Sl. No. J-353 (As corrected vide Public Notice No. 20 Dated:01.07.2002) | The quantity of import item at Sl. No. 2, shall be corrected to read as under:-
“1.05 kg/kg content in the export product” |
| 18. | 1123 | Miscellaneous Products Sl.No.K-32 | The norm covered by this entry shall be deleted. |
| 19. | 1136 | Miscellaneous Products Sl.No.K-103 | The description of export item shall be amended to read as under:-
“Absorbent Cotton Wool B.P.C./B.P./I.P.” |
| 20. | 1137 | Miscellaneous Products Sl.No.K-107 | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Polymethyl Metha Acrylate Sheet (Thickness upto 3.00 mm)” |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A3017 | Penta Adipate Stearate | 1 kg | 1. Penta Erythritol | 0.198 kg |
| 2. Adipic Acid | 0.217 kg |
| 3. Stearic Acid | 0.800 kg |
| A3018 | Farmazan Base | 1 kg | 1. Ortho Amino Phenol | 0.614 kg |
| 2. Ortho Nitro Toluene | 1.361 kg |
| 3. Copper Sulphate (Penta Hydrate) | 0.614 kg |
| 4. Benzaldehyde | 0.334 kg |
| A3019 | Para Chloro Benzaldehyde (4-Chloro Benzaldehyde) | 1 kg | 1. Para Chloro Toluene | 1.550 kg |
| A3020 | 1, 3-Dibromo-5, 5-Dimethyl Hydantoin | 1 kg | 2. 5,5 Dimethyl Hydantion | 0.526 kg |
| 3. Liquid Bromine | 0.621 kg |
| A3021 | Alpha Terpeniol perfumery grade minimum purity 99% | 1 kg | 1. Gum Terpentine containing Alpha Pinene 82.5% | 0.17 kg |
OR
1. Alpha Pinene | 1.608 kg |
| A3022 | Alpha Terpenyl Acetate perfumery grade minimum purity 99% | 1 kg | 1. Alpha Pinene | 0.17 kg |
OR
1. Gum Terpentine Oil content 82.5% of Alpha Pinene | 1.825 kg |
| A3023 | Amber Fleur (2,3,8,8-Tetramethyl-1 to 8-Octahydro-2-Naphthalenyl Mehtyl Ketone) | 1 kg | 1. Beta Pinene | 0.17 kg |
| 2. Methyl Ethyl Ketone | 0.650 kg |
| A3024 | Acrylic Polymers in primary form (RAN-1000) (solid content 36+/-3%) | 1 kg | 1. Acrylamide | 0.339 kg |
| 2. Dimethyl Aminoethyl Methaacrylate | 0.029 kg |
| 3. Emulsifier | 0.062 kg |
| 4. Solvent Oil (Paraffinic) | 0.236 kg |
| A3025 | Diphenyl Methane | 1 kg | 1. Benzene | 0.516 kg |
| 2. Benzyl Chloride | 0.837 kg |
| 3. Aluminium Chloride | 0.120 kg |
| A3026 | 3 Chloro Methyl Pyridine HCL | 1 kg | 1. 3 Pyridine Methanol | 0.740 kg |
| A3027 | Pigmented Chips | 1 kg | 1. Relevant Resin such as Nitro Cellulose Resin/ Polyamide Resin/ Vinyl Resin/ Acrylic Resin | 0.17 kg/kg content in the export product |
| 2. Relevant Organic/ Inorganic Pigments | 0.17 kg/kg content in the export product |
| 3. Relevant Platisiazer such as Dibutyl Phthalate / Acetyl Tributyl Citrate/ D.O.P/ Centisizer/ Epoxidised Soya Oil | 0.17 kg/kg content in the export product |
| 4. Solvent i.e. Ethyl Acetate/ Toluene/ IPA/MEK | 0.20 kg |
| A3028 | Tinted Float Glass | 1 MT | 1. Soda Ash | 275 kg |
| 2. Sodium Sulphate | 11 kg |
| 3. Silica Sand | 909 kg |
| 4. Dolomite | 224.9 kg |
| 5. Feldspar | 60 kg |
| 6. Iron Oxide | 2 kg |
| 7. Sodium Nitrate | 0.17 kg |
| 8. Nickel Oxide | 0.621 kg |
| 9. Cobalt Oxide | 0.17 kg |
| 10.Sodium Selenite | 0.14 kg |
OR
10. Selenium | 0.00756 kg |
| 11.Slag | 4 kg |
| 12.PMMA | 0.0469 kg |
| 13.LSHS/Furnace Oil | 266.73 kg |
| A3029 | Art Paper Coated One Side | 1 MT | 1. Wood Pulp | 0.8587 MT |
| 2. Calcium Carbonate | 0.2325 MT |
| 3. Latex (50% concentration) | 0.0520 MT |
| 4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) | 0.0558 MT |
| 5. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant | 0.01356 MT |
| 6. Stretch Film | As per packing Policy |
| 7. Poly Kraft Paper | As per packing Policy |
| A3030 | Art Paper (Coated (2 Side Coated Art Paper) | 1 MT | 1. Wood Pulp | 0.8100 MT |
| 2. Calcium Carbonate | 0.3351 MT |
| 3. Latex (50% concentration) | 0.0774 MT |
| 4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) | 0.0740 MT |
| 5. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant) | 0.0194 MT |
| 6. Stretch Film | As per packing Policy |
| 7. Poly Kraft paper | As per packing Policy |
| A3031 | Uncoated Paper | 1 MT | 1. Wood Pulp | 0.9164 MT |
| 2. Calcium Carbonate | 0.0973 MT |
| 3. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) | 0.0752 MT |
| 4. Stretch Film | As per packing Policy |
| 5. Poly Kraft paper | As per packing Policy |
| A3032 | 1/S Coated Art Board | 1 MT | 1. Wood Pulp | 0.925 MT |
| 2. Calcium Carbonate | 0.117 MT |
| 3. Clay | 0.033 MT |
| 4. Latex (50% concentration) | 0.021 MT |
| 5. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) | 0.047 MT |
| 6. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant) | 0.017 MT |
| 7. Stretch Film | as per packing policy |
| 8. Poly Kraft Paper | as per packing policy |
| A3033 | Viral Vaccines | 1000000 Doses | 1. Minimum essential medium (MEM) and Foetal Calf Serum (Foetal Bovine Serum) | 531.57 Ltr. |
| 2. Miscellaneous Chemicals for Viral Vaccine production such as D-Sorbitol Gelatine Food Grade, Lactalabumin Hydrolysate, L-Alanine, L-Arginine, L-Histadine, Tricine Soyabean Casein Digest Media Trypsin, L-Glutamine | upto 1.5% of FOB value of exports |
| 3. Consumables, such as Disposable Plastics Wares, Glasswares, Filters and Filter Aids, Testing Kits, SPF Eggs (Specific Pathogen Free Enggs) Media Bags and Accessories, Sterilisation Indicators | 891 Nos. |
4. Packing Materials:
(i) Aluminium Caps/ Seals | Net +10% wastage |
| (ii) Cold Chain Monitor Cards | 1215 Nos. |
| (iii) Glass Ampoules/ Sterile Water for Injection | Net+15% Wastage |
| (iv) Glass Vials | Net+15% Wastage |
| (v) Monitor Mark Dual Temp, Indicating Tag | 1215 Nos. |
| 5. Rubber Stoppers | Net+10% Wastage |
| 6. Corrugated Boxes | 1167 Nos. |
| 7. Thermo Cole Boxes (EPS Boxes) | 1167 Nos. |
| A3034 | Bacterial Vaccines | 1000000 Doses | 1. Consumables such as Disposable Plasticwares, Glass wares, Filters and Filter Aids | 212 Nos. |
| 2. Miscellaneous Chemicals for Bacterial Vaccine Production such as Aluminum Phosphate Gel, Thiomersal, Aluminium Chloride-6 Hydrate, Casamino Acid, Dextrose, Sodium Chloride, Sodium Hydroxide, Soyabean Casein Digest Media, Tri Sodium Ortho-Phosphate, Tryptone T, Ammonium Sulphate, Fluid Thioglycollate Medium | upto 4% of FOB value of exports |
3. Packing Materials:
1. Aluminium Caps/ Seals | Net +10% wastage |
| 2. Cold Chain Monitor Cards/Monitor Marks, Dual Temp. Indicating Tags/ Shipping Indicators | 350 Nos. |
| 3. Glass Ampoules/ Sterile Water for Injection | Net+15% Wastage |
| 4. Glass Vials | }Net+15% }Wastage |
| 5. Rubber Stoppers | Net+10% Wastage |
| 6. Corrugated Boxes | 525 Nos. |
| 7. Thermo Cole Boxes (EPS Boxes) | 525 Nos. |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C1799 | Cylindrical Air Intake Filter/ Pulse Jet Air Filter | 1 No. | 1. Relevant Filter Paper | 1.02 kg/kg content in the export product |
| C1800 | Non-Aerosol Spray Pump / dispensers | 1 No. | 1. Relevant Module Sub. Assembly | Net to net |
| 2. Relevant Actuator Assembly | Net to net |
| Note : The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No. if any) etc. of the components sought for import should confirm to those utilise in the manufacturer of the resultant product. |
| C1801 | Dumet wire (Copper tube filled with Alloy Steel and Nickel) | 1 kg | 1. Nickel Cathodes and / or Nickel Pellets-containing approx. 99.9%(min.) Nickel contents | 1.02 kg/kg content in export product |
| 2. High Conductivity Copper Tube containing approx. 99.9% (min.) Copper contents | 1.01 kg/kg content in export product |
| C1802 | Stainless Steel Ballpen Tips | 1 Million Nos. | 1. Stainless Steel Wire dia 2.3 mm of relevant grade | 2.30 kg/kg content in the export product |
| 2. Tungsten Carbide Balls | 1.02 Millions |
| 3. Cutting Oil, Cleaning Oil-Trichloroethylene, Cutting Tools | 4% of FOB value |
| C1803 | Sulphur Cored Wire | 1 kg | 1. Sulphur Granules S:99% Min. Size: 0 to 2 mm | 1.015 kg/kg of Sulphur Granule content in export product |
| 2. CRCA Steel Strips Grade: EDD Width 58 mm | 1.010 kg/kg of CRCA content in export product |
| C1804 | Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/ A.I. Equipment/ Cryogenic Containier / Cryoseal Liquid Nitrogen Container made of Aluminium | 1 No. | 1. Cold Rold Aluminium Sheet in Coil & Non Coil Form | 1.10 kg/kg content in export product |
| 2. Pallodium Oxide Anhydrous | Net to net |
| 3. Molecular Sleve | Net to net |
| 4. Non Woven Cryogenic Insulation Fabric | 1.05 kg/kg content in export product |
| 5. Aluminium Foil | 1.02 kg/kg content in export product |
6. Adhesive-Crest
7. Adhesive-Ciba
8. Consumables (Welding Wire, Welding Flux & Welding Rods) | 5% of FOB |
| 9. FRP Neck Tubes | Net to net |
| C1805 | High Speed Steel (Cobalt Grade) End Mills Dia 1 mm to 20 mm | 1 kg | 1. High Speed Steel (Cobalt Grade) in the form of Coils/ Bars/Rods of Diameter 7 mm to 23 mm | 1.50 kg |
| C1806 | Electrolytic Tinplate Waste/ waste printed / lacquered unprinted sheets cut to size for making components of round tin cans other than OTS cans | 1 kg | 1. Unprinted /Unlaquered Electrolytic Tinplate Waste / Waste Coil/Sheet | 1 kg |
| C1807 | Long Life Lamps (0-150 watts) life 16,000 hours to 20,000 hours) | 1000 Nos. | 1. 90% Krypton Gas Bal Nitrogen | 116 Litres at 1 Bar or 0.58 Litre at 200 Bar |
| 2. Glass Shells/ Glass Envelopes | 1150 Nos. |
| 3. Brass Caps | 1010 Nos. |
| 4. B701 Halogen Tungsten Wire (upto 30 mg) | 910 Mtrs. |
| 5. Lead in wire (Ballotiny filled) | 1010 Nos. |
| 6. Getter (P3L5) | 0.045 Litres |
| 7. K18 Lamp Copping Cement | 1.55 kg |
| 8. Getter (ALZR) | 0.030 Litres |
| 9. Marking Ink | 8.750 Grams |
| C1808 | Dish Ends (Ellipsoidal or Circular Shape) made of Non- Alloy Steel Plates | 1 kgs. | 1. Non-Alloy Steel Plates SA 516/515 | 1.1 kg/kg content of Steel Plate in the export product |
| C1809 | Pressure Die Cast Zinc Aluminium Alloy Builders Hardware Lacquered/ Powder Coated | 1 MT | 1. Zinc Ingot (High Grade Special 99.995% purity) | 1.12 kg/kg content of Zinc in export product |
| 2. Cylinders with or without key(s) | Net to net |
| 3. Plastic Chips for Plastic component such as washers key holders etc. Polyamite 66/ Nylon66/ Polyamite6 / Nylon6/ Polyacetal/ Delrin/ Polyoxymethylene | 1.05 kg/kg content in export product |
| 4. Machine Screws | Net to net |
5. Berlaclear CT Laquer/ Albrilac HB (for Electrophoretic Lacquer)
OR
(a) Polyester Powder for coating
(b)Solvent for Electrophoretic Lacquer
a. Rinse additive for Electrophoretic Lacquer
6. Abrasive Belt 50 mm x 3500 mm for grinding
7. Abrasive Belt 150 mm x 2000 mm for grinding
8. Liquid polishing compound for polishing Rough Finish
9. Trichloro Ethylene for degreasing
10.Bar Polishing compound Final Finish (Pre-polishing compound, polishing compound Finishing compound)
11.Polishing Buffs (Pre-polishing Buffs, Polishing Buffs, Finishing Buffs | Import item No. 5 to 11 upto 6% of FOB value |