PN No. 32 (RE-2000)/1997-2002 dt. the 1st September, 2000
Input-Output Norms further Added/ModifiedAttention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended,amendments/corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.
4. In the statement of Standard Input-Out Norms, following additions shall be made at appropriate places as mentioned below :-
CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl. No. A-2449, the new entries from Sl. No. A-2450 to A-2469 shall be added as per Annexure "B" to this Public Notice.
FOOD PRODUCTS After the existing entry at Sl. No. E-73 the new entry at Sl. No. E-74 shall be added as per Annexure "C" to this Public Notice.
PLASTIC PRODUCTS After the existing entry at Sl. No. H-414, the new entries from Sl. No. H-415 to H-416 shall be added as per Annexure "D" to this Public Notice.
TEXTILE PRODUCTS After the existing entry at Sl. No. J-324, the new entries from Sl. No. J325 to J326 shall be added as per Annexure "E" to this Public Notice.
MISCELLANEOUS PRODUCTS After the existing entry at Sl. No. K-126, the new entry at Sl. No. K-127 shall be added as per Annexure "F" to this Public Notice
5. This issues in public interest.
Sd/-
(N.L. Lakhanpal)
Director General of Foreign Trade
Issued by :
Government of India
Ministry of Commerce & Industry,
Department of Commerce, New Delhi
(F. No. 01/85/44/19/AM2001/DES-VI) Annexure "A"AMENDMENTS/CORRECTIONS | Sl. No. | Page No. | Reference | Amendments/corrections |
|---|
| (1) | (2) | (3) | (4) |
|---|
| 1 | 7 | Chemicals & Allied Products
Sl. No. A10 | The description of export item shall be amended to read as under:-
"1-ETHYL-6-FLUORO-7-CHLORO-1, 4-DI-HYDRO-4-OXO QUINOLINE-3-CARBOXYLIC ACID (NORFLOXACIN INTERMEDIATE". |
| 2. | 9 | Chemicals & Allied Products
Sl. No. A32 | The norm covered by this entry shall be deleted. |
| 3. | 54 | Chemicals & Allied Products
Sl. No. A319 | The norm covered by this entry shall be substituted by the following :-
|
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
|---|
| A319 | Norandro Stenedione (Nordion) | 1 kg | 1. DHA Acetate
2. Chloroform
3. Cyclo Hexane
4. Methanol
2.10 kg
| 12.13 kg
6.43 kg
5.58 kg |
| 4. | 67 | Chemicals & Allied Products
Sl. No. A425 | The description of the import item at Sl. No. 1 (with quantity) shall be amended to read as under :-
"1. N-Butyl Isocyanate- 0.493 kg
OR
N-Butylamine- 0.358 kg". |
| 5. | 71 | Chemicals & Allied Products
Sl. No. A465 | The norm covered by this entry shall be substituted by the following :-
|
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
|---|
| A465 | 4,4-Diamino Diphenyl amine-2 Sulphonic Acid (F.C. Acid) | 1 kg | 1. Para Nitro Chloro Benzene
2. Para Nitro Aniline | 0.70 kgs.
0.61 kgs. |
| 6. | 208 | Chemicals & Allied Products
Sl. No. A1670 | The description of import item at Sl. No. 8 shall be amended to read as under :-
"Relevant Polyester Cord/Cotton cord". |
| 7. | 268 | Chemicals & Allied Products
Sl. No. A2010 | At the end of this entry the existing foot note shall be deleted. |
| 8. | 269 | Chemicals & Allied Products
Sl. No. A2016 | The description of import item at Sl. No. 3 shall be amended to read as under :-
"3. Boron Tifluoro Gas (BF 3 Gas)". |
| 9. | 278 | Chemicals & Allied Products
Sl. No. A2090 | The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under :-
"1. Benzyl Chloride - 1.253 kg
OR
Toluene- 0.85 kg". |
| 10. | 294 | Chemicals & Allied Products
Sl. No. A2202 | In import item at Sl. No. 5 the following alternative item shall be added :-
"OR
Irgonox- 1330". |
| 11. | 302 | Chemicals & Allied Products
Sl. No. A2263 | The description of import item at Sl. No. 10 shall be amended (without any change in quantity) to read as under :
"10. Methyl Iodide
OR
Iodine".
|
| 12. | 306 | Chemicals & Allied Products
Sl. No. A2299 | The description of import item at Sl. No. 1 shall be amended to read as under :-
"Minimum Essential Medium (MEM) Powder with Hanks Salt L - Glutamine and without Sodium Bicarbonate Base". |
| 13. | 311 | Chemicals & Allied Products
Sl. No. A2316 | The description of export item shall be corrected to read as under:-
"D(-) Dihydro Phenyl Glycine". |
| 14. | 314 | Chemicals & Allied Products
Sl. No. A2338 | The norm covered by this entry shall be deleted. |
| 15. | 319 | Chemicals & Allied Products
Sl. No. A2381 | The norm covered by this entry shall be deleted. |
| 16. | 319 | Chemicals & Allied Products
Sl. No. A2382 | The norm covered by this entry shall be deleted. |
| 17. | 321 | Chemicals & Allied Products
Sl. No. A2389 | The norm covered by this entry shall be substituted by the following :- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
|---|
| A2389 | 2-Mercapto-5-Methoxy Benzimidazole | 1 kg | 1. Para Anisidine
2. Dimethyl Carbonate
3. Thionyl Chloride
4. Dimethyl Formamide
5. Hydroxy Propyl methyl Cellulose phthalate | 1.77 kg
1.68 kg
1.69 kg
1.00 kg
0.06 kg |
| 18. | 321
| Chemicals & Allied Products
Sl. No. A2393 | In import item at Sl. No. 3 quantity shall be amended to read as under :-
"0.730 kg". |
| 19. | 507 | Engineering Product
Sl. No. C396 | 1. The description of export item shall be amended to read as under:-
"Forged Non-alloy Steel Balls".
2. The description of import item shall be amended to read as under:-
"Non alloy steel wire rod". |
| 20. | 551 | Engineering Product
Sl. No. C512 | (i) The foot note No. 3 below this entry shall be amended to read as under :-
"Items of import at Sl. Nos. 3(iii) (a), (b), (g), (m), 3(ii) (b), (i), (l), (p), (q), (s), & l(ii) shall not be allowed in case of export of steel ingots".
(ii) The foot note No. 4 below this entry shall be amended to read as under :-
"Items of import at Sl. Nos. 1(ii), 3(ii), (c), (m) & 3(iii) (a), (b) shall not be allowed in case of rolled blooms/billets/slabs. However, against export of rolled billets made from continuous cast blooms, these item shall be allowed". |
| 21. | 609 | Engineering Product
Sl. No. C841 | 1. The description of export item shall be amended to read as under:-
"Forged Steel Balls made of Alloy Steel including Stainless Steel".
2. The description of import item shall be amended to read as under:-
"Alloy Steel Wire Rods including Stainless Steel wire rods of relevant grade" |
| 22. | 621 | Engineering Product
Sl. No. C915 | 1. The description of export item shall be amended to read as under:-
"Cold Rolled Alloy Steel Hardened and Tempered Saw Blades/Cold Rolled Non Alloy Steel Saw Blades".
2. The description of import item No. 1 (with quantity) shall be amended to read as under:-
“1(a) Hot Rolled Non Alloy Steel Strips -1.20 MT
OR
1(b) Hot Rolled Non Alloy H.R. Coil -1.20 MT”
- Note:
- For export of Alloy Steel Blades, item 1(a) only shall be allowed for import. For export of Non Alloy Steel Blades, item 1(b) only shall be allowed for import".
|
| 23. | 667 | Engineering Product
Sl. No. C1075 | (i) The description of import item at No. 1 shall be amended to read as under :-
"1. HR Steel Plates/Coils
(8 mm to 15 mm) - 1.83 kg/kg content in the export product"
(ii) The description of import item at Sl. No. 4 shall be amended to read as under :-
"4. Relevant bearings - Net to Net" |
| 24. | 722 | Engineering Product
Sl. No. C1354 | The norm covered by this entry shall be substituted by the following :- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
|---|
| C1354 | Surgical Suture Needles (eye type French spring eye Type, Atraumatic type Needles-) upto 250 mm Length. | 1 kg | 1. SS Steel wire AISI 420 series or equivalent | 1.25 kg |
| 25. | 752 | Engineering Product
Sl. No. C1489 | The norm covered by this entry shall be substituted by the following :- |
| Sl. No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C1489 | Rear Axle Housing Assembly for LCV/ HCV | 1 kg | 1. HR Steel Plates/Coils (8 mm to 15 mm)
2. Forgings (Machined)
OR
Forgings (Rough)
OR
Non alloy/ alloy steel bars/ Rods/ Billets/Blooms/ Ingots | 1.83 kg/kg content in the export product
Net to Net
1.47 kg/kg content in the export product
70 kg/kg content in the export product |
| 26. | 15 | Engineering product
Sl. No. C1538(Introduced vide Public Notice No.19. dated 03.07.2000) | 1. The description of export item shall be amended to read as under:-
"Non Alloy steel Forged (Machined) Hammers upto 10kg. pc. Wt. without Handle or with Handle made of Steel/Wood/rubber griped Steel Pipe"
2. At the end of this entry the following footnote shall be added:-
"Import items at 4(a)(i),(ii),(iii) and (b) will be allowed with reference to the nature of the product to be exported." |
| 27. | 861 | Plastic Product
Sl.No.H24 | (i) The description of import item at Sl. No. 1 shall be amended to read as under:-
"Relevant HDPE/PP Granules/Chips"
(ii) At the end for this entry, the following Note shall be added:-
- Note:In case of export of coloured items, relevant coloured master batches shall also be allowed as an additional input @ 0.02 kg/kg. weight of polymer and accordingly the quantity of relevant polymer shall be reduced to 1.06 kg/kg. content in the export product"
|
| 28. | 882 | Plastic Products
Sl.No. H129 | The norm covered by this entry shall be substituted by the following: |
| Sl. No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| H129 | Inlaid Linoleum Floor Covering of 2.0 mm thickness having a coating weight of 245+/-3% kg | 100 Sq. mtr. | 1. Raw linseed Oil
2. Granulated Cork/Cork Powder
3. Wood Powder
4. Gum Rosin, Gum Copal
5. Hydro Carbon Resin
6. Titanium Dioxide Rutile
7. Modified Acrylic/Stryene Co-Polymer Emulsion/Dispersion
8. Polythylene Wax
9. Non-lonic/lonic Surface Active Agent based on Tetra methyl De-cyndid and emulsifier for Acrylics/Anionic Surfactant based on Fluoropolymer | 87.14kg
5.21kg
33.23kg
17.12
2.39kg
28.40kg
0.6 4kg
016kg
0.05kg |
| Sl. No | Page No. | Reference | Amendments/Corrections |
|---|
| (1) | (2) | (3) | (4) |
|---|
| 29. | 883 | Plastic Products
Sl.No.H130 | The norm covered by this entry shall be substituted by the following: |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
|---|
| H130 | inlaid Linoleum Floor Covering of 2.5 mm thickness having a coating weight of 300+/-3%kg. | 100Sq.mtr | 1. Raw Linseed Oil
2. Granulated Cork/Cork Powder
3. Wood powder
4. Gum Rosin, Gum Copal
5. Hydro Carbon Resin
6. Titarium Dioxide Rutile
7. Modified Acrylic/Styrene Co-polymer Emulsion/Dispersion
8. Polythylene Wax
9. Non-lonic/lonic Surface Active Agent based on Tetra Methyl De-cyndid and emulsifier for Acrylics/ Anionic surfactant Based on Fluoropolymer
- Note: Packing materials (Green kraft Paper and Green Gum Tape) should be allowed as per packing Policy while issuing the licences.
| 1.10.00kg
5.51kg
41.91kg
21.60kg
2.39kg
36.67kg
0.64
0.16kg
0.05kg |
| 30. | 929 | Plastic products
Sl. No. H333 | (i) The description of import item at Sl. No. 1 shall be amended to read as under:-
"Relevant HDPE/PP Granules/Chips"
(ii) At the end of this entry the following Note shall be added:-
Note: "In case of export of coloured items, relevant coloured master batches shall also be allowed as an additional input @ 0.02 kg/kg. weight of polymer and accordingly the quantity of relevant polymer shall be reduced to 1.05 kg/kg content in the export product." |
| 31. | 932 | Plastic Products
Sl.No.H349 | (i) The description of import item Sl. No. 1 shall be amended to read as under:-
"Relevant HDPE/PP Granules/Chips"
(ii) At the end of this entry the following Note shall be amended to read as under:-
Note: "In case of export of coloured items, relevant coloured master batches shall also be allowed as an additional input @ 0.02 kg/kg. weight of polymer and accordingly the quantity of relevant polymer shall be reduced to 1.03 kg/kg.content in the export product."
1. In import item at Sl. No. 1 the following alternative item (with quantity) shall be added.
"OR
Polyster Cotton Blended Grey fabrics -1.03 kg/kg"
2. The following not shall be added below this norm:-
Note:- "If the import material is Polyester/Cotton Blended Grey Fabric, the item PVA shall not be permitted." |
| 32. | 963 | Textile Product | Sl.No.J31 1. In import item at Sl. No. 1 the following alternative item (with quantity) shall be added:-
“OR
Polyester Cotton Blended Grey Fabrics - 1.03 kg/kg”.
2. The following note shall be added below this norm:-
Note:-“If the import material is Polyester/Cotton Blended Grey Fabric, the item PVA shall not be permitted”. |
Annexure “B” to the
CHEMICALS AND ALLIED PRODUCTS| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2450 | 3-Nitro-4-Hydroxy Phenyl arsonic Acid (USP) | 1 kg | 1. Para Nitro Chloro Benzene
2. Hydrochloride Acid cone
3. Soda Ash
4. Reduction Grade Iron Powder
5. Arsenic Trioxide
6. Sodium Nitrite
7. Copper Sulphate
8. Cone. Sulphuric Acid
9. Cone. Nitric Acid
10.Sodium Hydroxide Flakes
11.Glaxial Acetic Acid
| 1.691 kg
8.192 kg
2.717 kg
1.976 kg
1.691 kg
0.762 kg
0.085 kg
3.705 kg
0.772 kg
1.185 kg
1.444 kg |
| A2451 | Acepifylline | 1 kg | 1. Anhydrous Theophyline
2. Anhydrous Piperazine
3. Methanol | 0.76 kg
0.31 kg
1.00 Litre/kg |
| A2452 | Cetrimide solution 40% BP | 1 kg | 1. Myristyl Alcohol Technical
OR
Myristyl Dimethy Amine
2. Methyl Ethyl Ketone
3. Liquid Bromine Technical
OR
Liquid Bromine
4. Isopropyl Alcohol | 0.352 kg
0.42 kg
0.24 kg
0.192 kg
0.264 kg
0.264 kg |
| A2453 | Lomefloxacin HCI | 1 kg | 1. 2,3,4, Trifluoro Aniline
2. Ethyl Ethoxy Methylene Malonate (EMME)
3. 2-Methyl Piperazine
4. Diethyl Sulphate
5. Potassium Carbonate
6. Dimethyl Formamide/ Acetonitrile | 1.14 kg
1.68 kg
0.82 kg
1.32 kg
1.18 kg
4.67 kg
|
| A2454 | Tramadol Hydrochloride | 1 kg | 1. Cyclohexanone
2. Meta Bromo Anisole
OR
N. Bromo Aniline
3. Caustic Soda/ Caustic Potash
4. Dimethyl Amine
5. Ammonium Chloride
6. 1,4 Diosane
7. Tetrahydrofuran
8. Isopropyl Alcohol/ Acetone | 1.50 kg
1.75 kg
2.51 kg
0.75 kg
1.00 kg
1.25 kg
2.00 kg
2.00 kg
1.50 kg |
| A2455 | Direct Black ADS (Direct Black 168) | 1 kg | 1. Para Nitro Chloro Benzene
2. Naphthalene crude
3. Aniline Oil
4. Meta Phenylene Diamine
5. Sodium Nitrate | 0.797 kg
0.476 kg
0.121 kg
0.135 kg
0.273 kg |
| A2456 | Articles made of Polyester (PET/PBT) | 1 kg | 1. Relevant Polyester (PET/PBT Resin)
| 1.05 kg/kg content in the export product |
| A2457 | Poly-Propylene (Copolymer) Resin | 1 MT | 1. Propylene
2. Ethylene
3. Active Shac-103
4. Triethyl aluminium
5. PEEB (SCA)
6. Antioxidants:
Irgonox-1010/ Irgonox-3114/ Ethanox-330/ Ultranox-626/ Igofos-168
7. Additives: Zinc Oxide/ Hydrotal cite DHT-4A/ Myverol 18-6(GMS)/ Millad-3988 | 0.980 MT
0.070 MT
0.064 MT
0.215 kg
0.173 kg
1.486 kg
1.821 kg |
| A2458 | Monoethyl Meta Toluidine (MEMT) | 1 kg | 1. Meta Toluidine | 0.927 kg |
| A2459 | Diethyl Meta Toluidine (DEMT) | 1 kg | 1. Meta Toluidine | 0.785 kg |
| A2460 | Pigment Red 53:1 (C.I. No. 155851:1) | 1 kg | 1. Beta Naphthol
2. C. Acid (2Amino 5 Chloro Toluene Sulphonic Acid) |
0.325 kg0.505 kg |
| A2461 | Filled Polypro-pylene compound (containing 30%+1% filler content) | 1 kg | 1. Polypropylene
2. Relevant filler
3. Additives | 700.4 gms/kg
309.0 gms/kg
20.6 gms/kg |
| Note: “In case of higher or lower filler content from 30+/-1, the quantity of filler will be calculated on pro rata basis based on the filler content. The lower or higher quantity of filler will be adjusted in the polymer quantity, maintaining the additive level same”. |
| A2462 | Cefixime USP | 1 kg | 1. 7-Phenylacetamideo-3- Chloromethyl Cephalosporanic Acid Para Methoxybenzyl Ester(GCLE)
OR
7-Phenyl Acetamido-3- Chloromethyl Cepham-4-carboxylic Acid Diphenyl Methyl Ester(GCLH)
2. 4-Chloro-2-(Z) Methoxy Carboxyl Methoxy Amino-3- Oxobutyric Acid (CMOBA)
OR
Alpha-2-Amino- Thiazol-4-YL-Alpha-Tert, Butoxy Carbonyl
3. Triphenyl Phosphine
4. Triphenyl Phosphite
5. Phosphorous Oxychloride
6. Activated Carbon
7. Cyclo Hexane
8. Dimethyl Formamide/Acetonitrile
9. Methylene Chloride/Ethyl Acetate | 3.00 kg
3.00 kg
0.62 kg
1.29 kg
1.22 kg
1.19 kg
0.48 kg
0.100 kg
0.22 kg
3.07 kg
17.83 kg |
| A2463 | Quinine Sulphate BP/EP/USP | 1 kg | 1. Cinchona Bark (Quinine content 4.5% +/- 10%
2. Toluene | 26.79 kg
20.00 litre/kg |
| A2464 | Integral Drip Leteral with in line Dripper (OD 16 mm, Wall thickness 0.9 mm) | 100 Metres (appox Weight 4.734 kgs) | 1. LLDPE
2. LDPE
3. Colour Master Batch | 3.367 kg
1.421 kg
0.305 kgs |
| A2465 | Seperator Paper 1D Zak-49 width 49 mm having coating of starch and adhesives min. 34% by weight. | 1 kg | 1. Modified Starch (Cellux)
2. Modified Starch (Longum)
3. Adhesive (coponyl)
4. Adhesive (Kiprogum)
5. Uncoated seperator Paper | 0.086 kg
0.196 kg
0.053 kg
0.152 kg
0.54 kg |
| A2466 | Acid Yellow 49 colocid Yellow FG (Dye content 66%) | 1 kg | 1. Beta Naphthol | 0.285 kg |
| A2467 | Acid Blue 193 Cololan Navy Blue RL (Dye content 59%) | 1 kg | 1. Beta Naphthol
2. Twitchell Oil | 0.455 kg
0.020 kg |
| A2468 | Para Chloro Phenyl Acetic Acid | 1 kg | 1. Parachloro Toluene
2. Sodium Cyanide | 1.205 kg
0.415 kg |
| A2469 | N-Ethyl 3-Carbomyl Cyano 4-Methyl-6 Hydroxy–2Pyridone | 1 kg | 1. Sodium Cyanide
2. Aceto Acetic Methyl Ester
3. Mono Ethyl Amine (70%) | 0.852 kg
0.876 kg
0.730 kg |
Annexure “C” to the
FOOD PRODUCTS| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| E74 | Paprika Oleoresin/ Capsicum Oleoresin | 1 kg | 1. Hexane | 4.5 kgs. |
Annexure “D”
PLASTIC PRODUCTS| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| H415 | Article made of SAN Resin (Styrene Acrylonitrile Resin) | 1 kg | 1. SAN Resin (Styrene Acrylonitrile Resin) | 1.05 kg/kg content in the export product |
| H416 | Plastic Sharpners | 1 No. | 1. Relevant Polystyrene (GPPS/HIPS) Moulding Powder/Granules
2. Blades
3. Screws
| 1.05 kg/kg content in the export product
Net to net
Net to net |
Annexure "E"
TEXTILE PRODUCTS| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| J325 | Cotton Printed Fabrics | 1 sq. mtr. | 1. Relevant Cotton processed fabrics | 1.01 sq. mtr. |
| J326 | Polyester Jacketted fire hose without lining | 1 kg | 1. Polyester Staple fibre
2. Polyester filament yarn | 1.10 kg/kg. content in the export product
1.04 kg/kg. content in the export product |
Annexure “F” to the
MISCELLANEOUS PRODUCTS| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|
| K127 | Coir and Coir Products | 1 MT/ 1 kg/ 1 No. | 1. Relevant packing materials
(a) In finished form
OR
Relevant raw material to be used for manufacture of packing materials |
Net+1% wastage
Net+5% wastage |
Presented by eximkey.com