PUBLIC NOTICE No.12 (RE-2000)/1997-2002 Dated 1st June, 2000.

Attention is invited to Paragraph 4. 11 of the Export and Import Policy 1997-2002. as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.l. 1997-2002. as amended and also to the Handbook of Procedures. Vol.2, 1997-2002. as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11. of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments / modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments / corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTSAfter the existing entry at Sl.No.A-2428, the new entries from Sl.No.A-2429 to A-2438 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTSAfter the existing entry at Sl.No.C-1530, the new entries from Sl.No.C-1531 to C-1537 shall be added as per Annexure "C" to this Public Notice.This issues in Public interest.

Sd/-
(N.L Lakhanpal)
Director General of Foreign Trade

ANNEXURE "A" AMENDMENTS / CORRECTIONS

--------------------------------------------------------------------------------------Sl.	Page	Reference			Amendments / CorrectionsNo.	No.--------------------------------------------------------------------------------------1.	174	Chemicals &		The norms covered by this entry shall be 		Allied Products	substituted by the following:-		S. No. A1412 ----------------------------------------------------------------------------------Sl.		Export		Qty.	Import 		Qty.No.		Item					allowed ---------------------------------------------------------------------------------A1412	N(1,3 Dimethyl Butyl)	1 Kg.	1.	Aniline		0.463 Kg.	N Phenyl-			2.	MIBK (Methyl	0.444 Kg.	Para Phenylene				Isobutyl Ketone)	Diamine				3.	Para Nitro Chloro	0.761 Kg.	(Minimum 95%)				Benzene					4.	Formic Acid (85%)	0.354 Kg.					5.	Potassium Carbonate0.459 Kg.					6.	Platinum Catalyst	0.0002 Kg. -----------------------------------------------------------------------------------2.	306	Chemicals &		The description of import item Sl. No. 1 shall be 		Allied Products		amended to read as under :-		S. No. A2299		"L-Glutamine and without Sodium Bicarbonate."3.	307	Chemicals &		The quantity of export item shall be corrected to 		Allied Products		read as under :-		S. No. A2301		"10,000 vials."4.	438	Engineering		After import item No. 7, the following item (with 		Products		quantity) shall be added:-		Sl. No. C169		8.	Aluminium Sheet / CRCA	-1.05 Kg/Kg 						Sheet (for Blades of Fan)	content in 						(only the relevant item used	the export 						in the export to be allowed)	product."5.	589	Engineering		After import item No. 1, the following alternative 		Products		item (with quantity) shall be added:-		Sl.No. C697		 		"OR					Aluminium Wire			36.225 Kg."					(Not below 3mm)6.	589	Engineering		After import item No. 1, the following alternative 		Products		item (with quantity) shall be added:		Sl. No. C698				OR					Aluminium Wire			5.999 Kg."					(Not below 3mm)7.	607	Engineering		1. The description of import item No. 1 (with 		Product			quantity) shal1 be amended to read as		Sl. No. C829		under:					1. 	C.R.S.S. Strip		988 Kgs.							OR						H.R.S.S. Strip		1522 Kgs.					2. At the end of this entry the following Note 					shall be added					NOTE:- "In so far as H.R.S.S. is concerned, the 					input norm as above shall be valid for a period of 					one year viz. upto, 31.3.2001 only after which it 					shall be reviewed."8.	615	Engineering		1. Import item No. 5 alongwith quantity shall 		Product			be deleted.		Sl. No.C876		2. After import itern No. 4 the following items 					(with quantity) shall be added :-					"5.	Polyox WSRN 750		-44 Kg.					6. 	Polyox Coagulant		-44 Kg.					7. 	General purpose Polystyrene	-38 Kg."				 					3. The note below this norm shall be amended to 					read as under:					NOTE:- 1. The items at S.No. 5,6 and 7 above shall 					be allowed only if the product exported is with 					Lubra Strip9.	712	Engineering		The description of import item No. 1 (without any 		Product			change in quantity) shall be amended to read as 		Sl. No. C1315		under.					"Inco's Nickel Rounds / Pellets Unwrought & 					Unalloyed."10.	757	Engineering		The description of import item No. 1 (alongwith 		Product			quantity) shall be amended to read as under:		Sl. No.C1503		1.	Copper concentrate	-1.06 MT/MT 						of Copper		content in									the export 									Product.								OR						Copper Scrap		-1.075 MT/MT 									copper content in									the export 									product.						Blister			-1.04 MT/MT copper 									content in the 									export product."(Sl. No. C1503 has been amended vide PN. No. 13(RE-00), Dt.7/6/2000)11.	805	Food Product		After import item No. 3 the following items (with 		Sl.No.E51			quantity) shall be added					"4.	Kraft Paper		-Net+ 1 % wastage					5.	Adhesive (Powder form)	0.005 gm (aprox.)					6.	Printing Ink		-0.00005 gm."

12.	830	Leather Product		1. After import item No. 7, the following item 	831	Sl.No.G18		(with quantity) shall be added					"8. Leather Chemicals	-As per Leather 								Chemicals 								prescribed in G-								7, on pro-rata								basis".					2. At the end of this entry the following foot-note 					shall be added					"Note :2	For import of Leather Chemicals (Item 					No. 8) the requirement of Finished 					Leather per number of Glove is 0.50 sq. ft.".13.	873	Plastic Product		After import item No. 1 the following additional 		Sl.No.H-90		item with quantity shall be added					"2.	Trigonox 101 (2,5 Bis tert-	0.007 						butylperoty -2,5-dimethyl	kg/kg".						hexane, minimum 92% in						solvent)14.	951	Sports Goods		1. The description of export item (without change 		Sl. No. I-23		in quantity), shall be amended to read as under :					"Head Guard made out of PVC / PU leather cloth".					2. The description of import item (without change 					in quantity) shall be amended to read as under					"Relevant PVC / PU Leather Cloth".15.	1	General Notes for	" In the general notes, note No. 4 shall be deleted		all Export Product		Group--------------------------------------------------------------------------------------								ANNEXURE "B"				CHEMICALS AND ALLIED PRODUCTS-----------------------------------------------------------------------------------------------Sl.	Export Item		Qty.		Import Item		QtyNo.									Allowed.-----------------------------------------------------------------------------------------------A2429	Tris Nonyl Phenyl 		1 Kg.	1. Nonyl Phenol			1.066 Kg.	Phosphite			2. Phosphorous Trichloride		0.222 Kg.A2430	Cis-2-(2,4-Dichlorophenyl)	1 Kg.	1. 2,4 Dichloro Acetophenone	3.07 Kg.	-2- (1-H-Imidazole-1,		2. Imidazole			1.38 kg.	-yl-methyl-1,3- Dioxolan		3. Toluene			6.41 kg.	-4-y1) methyl-P-Toyl 		4. Methanol			9.08 kg.	sulplhonate			5. Methyl Isobutyl Ketone		0.74 kg.		OR	Cis-TosylateA2431	Cyanoacetamide		1 kg.	1. Monochloro Acetic Acid		3.75 kg.					2. Sodium Cyanide			1.36 kg.					3. Acetone			1.75 kg.					4. Methyl Isebutyl Ketone		1.36 kg.A2432	Reactive Polyamide Resin 	1 kg.	1. Domer Acid			0.684 kg.	with Free Amino Groups and 		2. Triethylene Tetramine		0.443 kg.	Viscosity at 25°C 125 to 		3. Industrial Mono Carboxylic 	poises (SYNPOL-140) 		 Fatty Acid			0.029 kg.	A2433	Reactive Polyamide Resin 	1 kg.	1. Industrial Monocarboxylic 		with High Amine value 		 Fatty Acid			0.600 kg. 	(340-400) Long Pot Life 		2. Triethylene Tetramine		0.440 kg.	and Viscosity at 25°C 2 to	6 poises (SYNPOL-160)A2434	Slow curing Solvent free 	1 kg.	1. Aniline			0.470 kg.	aromatic polyamine Epoxy 		2. Epoxy Resin			0.384 kg.	adduct (Epoxy Resin 		3. Dibutyl Phthalate		0.360 kg.	Hardner-340) Viscosity 	-50- 90 Poises Pot life 	-8-10 hrs.A2435	Fast Curing Solvent free 	1 kg.	1. Aniline			0.442 kg.	aromatic polyamine Epoxy 		2. Epoxy Resin			0.146 kg.	adduct (Epoxy Resin 		3. Dibutyl Phthalate		0.338 kg.	Hardner-350) Viscosity-	150- 210 Poises Pot life 	-20-30 minutesA2436	Polyvinyl Butyral Resin	1 kg.	1. Poly Vinyl Alcohol		0.710 kg.					2. N-Butyraldehyde		0.429 kg.A2437	BOPP Bags with / without 	1 kg.	1. BOPP Film (relevant 		1.02 kg/kg 	Adhesive Tape 			 thickness and grade) 		content in 									the export 									Product					2. Double side self-adhesive 	1.02					 Tape				sq.mtr					 				/sq. mtr.									content in									the export									productNote: 	The item No. 2 viz. Double side self-adhesive Tape shall be permitted for 	import only when the product is exported with adhesive tape.A2438	Reactive Polyamide Resin 	1 kg.	1. Domer Acid			0.236 kg.	with High Amine Value 		2. Triethylene Tetramine		0.431 kg.	(380-420) Rapid curing 		3. Industrial Mono carboxylic 	and Viscosity at 25° 10 to 		 Fatty Acid			0.389 kg. 	15 poises (SYNPOL- 150)--------------------------------------------------------------------------------------				ENGINEERING PRODUCTS		ANNEXURE'C'--------------------------------------------------------------------------------------Sl.	Export Item		Qty.	Import Item			Qty.No.								 Allowed--------------------------------------------------------------------------------------C1531	Pneumatic Tools-Hand	1 No.	1.	Relevant Inlet bushing	1 No.	drills without Muffler		2.	Relevant Hose tail		1 No.	with chuck 3/4" X 3/4"		3.	Relevant Throttle lever	1 No.	(19mm X 95.2mm)			4.	Relevant Rear Valve seat	1 No.					5.	Relevant Front Valve Seat	1 No.					6.	Relevant Valve		1 No.					7.	Relevant Handle bare	1 No.					8.	Relevant Throttle Valve 						bushing			1 No.					9.	Relevant Bolt		2 No.					10.	Relevant Pawl		2 No.					11.	Relevant Ratchet Ring	1 No.					12.	Relevant Cylinder		1 No.					13.	Relevant Piston		1 No.					14.	Relevant Cylinder bushing	1 No.					15.	Relevant Retainer Plate	1 No.					16.	Relevant Chuck		1 No.					17.	Relevant chuck sleeve	1 No.					18.	Relevant front head	1 No.					19.	Relevant Plunger shifter1 No.					20.	Relevant shifter sleeve	1 No.					21.	Relevant Retainer sleeve	1 No.NOTE: 	The import of components shal1 be allowed on net to net basis with 	accountability clause.C1532	Pneumatic Tools-Hand	1 No.	1.	Relevant Inlet bushing	1 No.	drills with Muffler and		2.	Relevant Hose tail		1 No.	shifier sleeve with chuck		3.	Relevant Throttle lever	1 No.	3/4" X 3/4" (19mm X		4.	Relevant Rear Valve seat	1 No.	95.2mm)				5.	Relevant Front Valve Seat	1 No.					6.	Relevant Valve		1 No.					7.	Relevant Handle bare	1 No.					8.	Relevant Throttle Valve 						bushing			1 No.					9.	Relevant Bolt		2 No.					10.	Relevant Pawl		2 No.					11.	Relevant Ratchet Ring	1 No.					12.	Relevant Cylinder		1 No.					13.	Relevant Piston		1 No.					14.	Relevant Cylinder bushing	1 No.					15.	Relevant Retainer Sleeve	1 No.					16.	Relevant Retainer Plate	1 No.					17.	Relevant Chuck		1 No.					18.	Relevant Chuck Sleeve	1 No.					19.	Relevant Front head	1 No.					20.	Relevant Muffler		1 No.					21.	Relevant Plug-Muffler	1 No.					22.	Relevant Button-rotation 						release			2 No.					23.	Relevant Washer-clamping	1 No.					24.	Relevant Plunger Shifter	1 No.					25.	Relevant Shifter Sleeve	1 No.					26.	Relevant Depth gauge	1 No.					27.	Relevant dead handle	1 No.NOTE:	The import of components shall be allowed on net to net basis with 	accountability clause.C1533	Pneumatic Tool Concrete 	1 No.	1.	Relevant Live Air Handle 	Vibrator with 2-1/2				Cap 			1 No.	(inch) Head			2.	Relevant Plug Handle	1 No.					3.	Relevant Live Air Handle 						cover			1 No.					4.	Relevant Sleeve		1 No.					5.	Relevant Hose Nipple	2 No.					6.	Relevant 'Band-It' Clamp	2 No.					7.	Relevant Intake Hose	1 No.					8.	Relevant Shell & Nose Cap	1 No.					9.	Relevant End Cap		1 No.					10	Relevant Eccentric Shaft 						Nut Assembly		1 No.					11.	Relevant Upper end Plate	1 No.					12.	Relevant Eccentric Weight	1 No.					13.	Relevant Eccentric Shaft	1 No.					14.	Relevant Lower end Plate	1 No.					15.	Relevant Hose Clamp (Band-It),3 No.					16.	Relevant Swivel Nipple	1 No.					17.	Relevant Lock wire		1 No.					18.	Relevant Hose Clamp 						(Band-It)			2 No.					19.	Relevant Hose Nipple	1 No.					20.	Relevant Exhaust Swivel 						Collar			1 No.					21.	Relevant Live air hose	1 No.					22.	Relevant Strainer		1 No.					23.	Relevant Oiler body	1 No.					24.	Relevant Live air handle 						stem & Bushing		1 No.					25.	Relevant Exhaust Hose	1 No.Note:	The import of components shall be allowed on net to net basis with 	accountability clause.C1534	Pneumatic Tool 	1 No.		1.	Relevant Valve		1 No.					2.	Relevant retainer		1 No.					3.	Relevant Piston		1 No.					4.	Relevant Sprint		2 No.					5.	Relevant Cylinder		1 No.					6.	Relevant Clamp		1 No.					7.	Relevant Muffler		1 No.					8.	Relevant Muffler P1ug	1 No.					9.	Relevant Housing		1 No.					10.	Relevant Pin		2 No.					11.	Relevant Air Tube		1 No.					12.	Relevant Bushing		2 No.					13.	Relevant Shaft		1 No.					14.	Relevant Button		1 No.					15.	Relevant Bush		1 No.					16.	Relevant Bearing		2 No.					17.	Relevant Sleeve		1 No.					18.	Relevant Casting		1 No.					19.	Relevant Chain Link Lead	1 No.					20.	Relevant throttle valve	1 No.					21.	Relevant Handle		1 No.NOTE:-	The import of components shall be allowed on net to net basis with 	accountability clause.C1535	Pneumatic Tool	1 No.		1.	Relevant Handle Bracket 	Rock Drill					(made of steel 						Gr. SAE 8620)		1 No. 					2.	Relevant Handle Bolt 						(made of steel Gr.EN 9)	1 No.					3.	Relevant Air inlet swivel 						(made of steel Gr. EN24)	1 No.					4.	Relevant Air inlet swivel 						nut (made of steel 						Gr. SAE 8620)		1 No.					5.	Relevant Blower valve 						(made of steel 						Gr. SAE 8620)		1 No.					6.	Relevant Thru Bold (made 						of steel Gr. EN24)		2 No.					7.	Relevant Front head (made 							of steel Gr. SAE 8620)	1 No.					8.	Relevant Retainer (made 						of steel Gr. SAE 8620)	1 No.					9.	Relevant Retainer 						trunnion (made of steel 						Gr. SAE 8620)		2 No.					10.	Relevant Cylinder (made 						of steel Gr. SAE 8620)	1 No.					11.	Relevant Back head (made 						of steel Gr. SAE 8620)	1 No.					12.	Relevant Throttle valve 						handle (made of steel 						Gr. SAE 8620)		1 No.					13.	Relevant Ratchet ring 						(made of steel 						Gr. SAE 8620)		1 No.					14.	Relevant Valve case (made 						of steel Gr. 354 )		1 No.					15.	Relevant Blower valve 						bushing (made of steel 						Gr. SAE 8620)		1 No.					16.	Relevant Rifle bar nut 						(Bronze) (made of steel 						Gr. SAE 8620)		2 No.					17.	Relevant Piston (made of 						steel Gr. 355 )		1 No.					18.	Relevant Bushing Cylinder 						(made of steel 						Gr. SAE 8620)		1 No.					19.	Relevant Air tube (made 						of steel Gr. SAE 8620)					20.	Relevant Chuck rotation 						nut (made of steel Brass)	1 No.					21.	Relevant Chuck Sleeve 						(made of steel 						Gr. SAE 8620)		1 No.					22.	Relevant Chuck (made of 						steel Gr. SAE 8620)	1 No.					23.	Relevant Rifle bar (made 						of steel Gr. SAE 8620)	1 No.					24.	Relevant Valve (made of 						steel Gr. SAE 8620)	1 No.					25.	Relevant Valve Guide 						Bushing (made of steel 						Gr. SAE 8620)		1 No.					26.	Relevant Bushing water 						valve (made of steel 						Brass)			1 No.					27.	Relevant Throttle Valve 						(made of steel 						Gr. SAE 8620)		1 No.NOTE:-	The import of components shall be allowed on net to net basis with 	accountability clause.C1536	Pneumatic Tool 	1 No.		1.	Relevant Throttle valve 	Rivetting Cutter				(made of steel 	(buster) 8" to			 	Gr. SAE 8620)		1 No.	11" Cylinder			2.	Relevant Throttle tube 						(made of stee1 Gr. ENIA)	1 No. 					3.	Relevant Throttle lever 						(made of steel Gr. EN8)	1 No.					4.	Relevant Valve case lid 						(made of steel 						Gr. SAE 8620)		1 No.					5.	Relevant Valve (made of 						steel Gr. EN24)		1 No.					6.	Relevant Valve case (made 						of steel Gr. SAE 8620)	1 No.					7.	Relevant Handle (made of 						steel Gr. EN8)		1 No.					8.	Relevant Spring clip 						(Lock collar) (made of 						steel Gr. EN8)		1 No.					9.	Relevant Lock collar (made 						of steel Gr. EN8)		1 No.					10.	Relevant Cylinder (made 						of steel Gr. EN24)		1 No.					11.	Relevant Piston (made of 						steel Gr. T118 CR2)	1 No.					12.	Relevant Lower sleeve 						(made of steel Gr. EN31)	1 No.					13.	Relevant Upper Sleeve 						(made of steel Gr. EN31)	1 No.					14.	Relevant Retainer sleeve 						(made of steel Gr. EN24)	1 No.					15.	Relevant Exhaust 						Deflector (made of steel 						Gr. SAE1070)		1 No.NOTE:-	The import of components shall be allowed on net to net basis with 	accountability clause.C1537	Regulators with		1 No.		1.	Zinc	245	rotating outlet		(227 				gms	for LPG			gms)	cylinder--------------------------------------------------------------------------------------	

Presented by eximkey.com