Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

PUBLIC NOTICE NO. 46 (RE-99)/1997-2002, Dt. 3/01/2000.

Attention is invited to Paragraph 7.8 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-2319, the new entries from Sl.No.A-2320 to A-2369 shall be added as per Annexure "B" to this Public Notice.ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1479, the new entries from Sl.No.C-1480 to C-1486 shall be added as per Annexure "C" to this Public Notice.MISCELLANEOUS PRODUCTS
After the existing entry at Sl.No.K-120, the new entry Sl.No.K-121 to K-124 shall be added as per Annexure "D" to this Public Notice.TEXTILE PRODUCTS
In the statement of Standard Input Output Norms relating to Textile Products, amendments / additions shall be made at appropriate places as per Annexure "E" to this Public Notice.This issues in Public interest.

(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE

(ASHUTOSH MISHRA)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure "A" to the
Public Notice No. 46
Dated: 03/01/2000

AMENDMENTS/CORRECTIONS

(1)	(2)	(3)	(4)
1.	54	Chemicals & Allied Products Sl.No.A316	The description of the export item shall be amended (without any change in the quantity) to read as under:- "Niacinamide/ Nicotinamide BP/USP"
2.	68	Chemicals & Allied Products Sl.No.A425	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A425	Tolbutamide	1 kg	1. Para Toluene Sulphonamide	0.976 kg
A425	Tolbutamide	1 kg	2. N-Butyl Amine	0.358 kg
3.	68	Chemicals & Allied Products Sl.No.A426	The norm covered by this entry shall be deleted.
4.	130	Chemicals & Allied Products Sl.No.A940	The description of the export item shall be amended to read as under:- "Solvent Blue 2B/ Solvent Blue 36(C.I.No. 61551)".
5.	173	Chemicals & Allied Products Sl.No.A1379	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A1379	Light Liquid Paraffin BP/VSP	1 kg	1. HVI Base Oil	1.25kg/kg content in the export product
A1379	Light Liquid Paraffin BP/VSP	1 kg	2. Isopropyl Alcohol	0.172 kg/kg content in the export product
6.	178	Chemicals & Allied Products Sl.No.A1452	The quantity of import item No. 3 shall be amended to read as under :- "Acetic Acid - 0.657 Kg."
7.	192	Chemicals & Allied Products Sl.No.A1567	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A1567	M.G. Poster Paper /MG Tissue Paper	1 MT	1. Waste Paper	0.709 MT
A1567	M.G. Poster Paper /MG Tissue Paper	1 MT	2. Gum Rosin	0.019 MT
8.	220	Chemicals & Allied Products Sl.No.A1708	The import item namely "Nitrile Rubber (NBR)" in the Sl. No. 2 shall be deleted.
9.	246	Chemicals & Allied Products Sl.No.A1820	The description of the export item shall be amended to read as under:- "Polychloroprene Based Adhesives (Solid content 23% + 1%)".
10.	268	Chemicals & Allied Products Sl.No.A1997	Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A1997	Atrazine 97% Tech.	1 kg	1. Cyanuric Chloride	0.883 kg
			2. Isopropyl Amine (70%)	0.404 kg
			3. Monoethyl Amine (70%)	0.308 kg
			4. Toluene	0.240 kg
			5. Caustic Soda (100% basis)	0.371 kg
11	271	Chemicals & Allied Products Sl.No.A2016	Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A2016	Ceftriaxone Sodium Sterile	1 kg	1. 7-ACA	0.668 kg
			2. 2.5 Dihydro-2- Methyl-3- Mercapto -5-Oxo-6-hydroxy- 1,2,4, Triazine(TAA)	0.36 kg
			3. BF Gas	0.611 kg
			4. Mercapto Benzo Thiazole 4-4-Y1 2(2-Amino Thiazolyl Methoxy Imino Acetate (MAEM)	0.81 kg
			5. Triethyl Amine	0.514 kg
			6. Acetonitrile	0.60 kg
			7. Methylene Chloride	7.34 kg
			8. Acetone	13.99 kg
12.	273	Chemicals & Allied Products Sl.No.A2027	Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A2027	Gefotaxime Sodium Sterile	1 kg	1. 7-ACA	0.741 kg
			2. Mercapto Benzo Thiazole-4-YL-2 (2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM) OR	1.025 kg
			2. (i) Ethyl Aceto Acetate	0.965 kg
			2. (ii) Potassium Carbonate	1.49 kg
			2. (iii) Bromine	0.76 kg
			2. (iv) Triphenyl Phosphine	1.23 kg
			2. (v) Vulkacit Acid	1.49 kg
			3. Methylene Chloride	5.20 kg
			4. Isopropyl Alcohol	4.68 kg
			5. Acetone	1.51 kg
			6. Methanol	5.23 kg
			7. Formic Acid	1.19 kg
			8. Triethyl Amine	0.41 kg
			9. Ethyl Hexanate/2- Ethyl Hexanic	0.40 kg

13.	274	Chemicals & Allied Products Sl.No.A2033	After import item No. 5 the following item with quantity shall be added :- "6. N-Propanol - 6.766 Kgs."
14.	19	Chemicals & Allied Products Sl.No.A2144 (Introduced vide Public Notice No.52 dated: 5.11.98 )	The description of import item No. 4 shall be amended to read as "Gum Rosin instead of Resin"
15.	19	Chemicals & Allied Products Sl.No.A2146 (Introduced vide Public Notice No. 52 dated: 5.11.98 )	After import item No. 4, the following item with quantity shall be added :- "5. Gum Rosin - 0.238 kg"
16.	25	Chemicals & Allied Products Sl.No.A2193 (Introduced vide Public Notice No.3 dated: 5.4.99 )	The description of import item No. 4 shall be amended to read as "1-Phenyl 3 Methyl 5 Pyrazolone instead of Aceto Acet Ortho Anisidide"
17.	30	Chemicals & Allied Products Sl.No.A2218 (Introduced vide Public Notice No.3 dated 5.4.99)	The quantity of import item No. 10 and description of export Item No. 13 shall be amended to read as :- 10. "0.642 kg instead of 0.042 Kg." 13. " Di Isopropyl Ether instead of Di Isopropyl Ester"
18.	14	Chemicals & Allied Products Sl.No.A2262 (Introduced vide Public Notice No.26 dated 4.8.99)	The description of export item shall be amended to read as:- "Pigment Red 57:1 (Rosinated containing 92% Pigment)"
19.	16	Chemicals & Allied Products Sl.No.A2273 (Introduced vide Public Notice No.26 dated 4.8.99 )	Corrigendum The description of import item No. 1 shall be corrected to read as:- "Diphenylphosphonate (DPP) instead of Diphenylphophonate(DPP)"
20.	373	Engineering Products Sl.Nos. C12	The description of export item shall be amended to read as "Aluminium Foil commercial grade embosed cut to shape, preformed coated printed or other re-inforcing material" without any change in the quantity.
21.	428 & 429	Engineering Products Sl.Nos. C279, C280, C281 & 282	After import item No. 9 in the Norms covered by these entries, the following items with quantity shall be added:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C279	Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 watts under SKD condition	1 No.	"10. Strain relief bush	1.00 No.
			11. Pull chain switch with chord	1.00 No.
			12. Aluminium alloy	0.50 kgs
			13. Lead wire	1.175 Mtrs
			14.Power supply chord	2.00 Nos.
			15. CRCA steel for end shields, mounting base, Lugs & pads	1.50 Kgs.
			16.Open circuit switch	1.00 No.
			17.Centrifugal gear	1.00 No.
			18.Terminal/Crimp cap	3 Nos. Or 4 Nos. (as per requirement: quantity to be accounted for in the export product)
			19.Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation	3 or 4 sets (as per require-ment quantity to be accounted for in the export product)
			20.Plastic film for labels/name plates	10 grams
			21.Transfer ribbon for labels/name plates"	8 sq.inches
C280	Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180 watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180 watts under SKD condition	1 No.	"10. Strain relief bush	1.00 No.
			11. Pull chain switch with chord	1.00 No.
			12. Aluminium alloy	0.50 kgs
			13. Lead wire	1.175 Mtrs
			14.Power supply chord	2.00 Nos.
			15. CRCA steel for end shields, mounting base, Lugs & pads	1.50 Kgs..
			16.Open circuit switch	1.00 No.
			17.Centrifugal gear	1.00 No.
			18.Terminal/Crimp cap	3 Nos. Or 4 Nos. (as per requirement: quantity to be accounted for in the export product)
			19.Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation	3 or 4 sets (as per require-ment quantity to be accounted for in the export product)
			20.Plastic film for labels/name plates	10 grams
			21.Transfer ribbon for labels/name plates"	8 sq.inches
C281	Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750 watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750 watts under SKD condition	1 No.	"10. Strain relief bush	1.00 No.
			11. Pull chain switch with chord	1.00 No.
			12. Aluminium alloy	0.50 kgs
			13. Lead wire	1.175 Mtrs
			14.Power supply chord	2.00 Nos.
			15. CRCA steel for end shields, mounting base, Lugs & pads	1.50 Kgs..
			16.Open circuit switch	1.00 No.
			17.Centrifugal gear	1.00 No.
			18.Terminal/Crimp cap	3 Nos. Or 4 Nos. (as per requirement: quantity to be accounted for in the export product)
			19.Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation	3 or 4 sets as per require-ment quantity to be accounted for in the export product)
			20.Plastic film for labels/name plates	10 grams
			21.Transfer ribbon for labels/name plates"	8 sq.inches
C282	Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and above under SKD condition	1 No.	"10. Strain relief bush	1.00 No.
			11. Pull chain switch with chord	1.00 No.
			12. Aluminium alloy	0.50 kgs
			13. Lead wire	1.175 Mtrs
			14.Power supply chord	2.00 Nos.
			15. CRCA steel for end shields, mounting base, Lugs & pads	1.50 Kgs..
			16.Open circuit switch	1.00 No.
			17.Centrifugal gear	1.00 No.
			18.Terminal/Crimp cap	3 Nos. Or 4 Nos. (as per requirement: quantity to be accounted for in the export product)
			19.Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation	3 or 4 sets (as per require-ment quantity to be accounted for in the export product)
			20.Plastic film for labels/name plates	10 grams
			21.Transfer ribbon for labels/name plates"	8 sq.inches
22.	452	Engineering Products Sl.No. C367	The quantity of the import item shall be amended as "1.20 Kg/kg of the net content in export Product instead of 1.10 Kg/kg of the net content in export Product".
23.	465	Engineering Products Sl.No. C428	The quantity of the import item shall be amended as 1.25 kg instead of 1.15 kg.
24.	465	Engineering Products Sl.No. C429	The quantity of the import item shall be amended as 1.25 kg instead of 1.15 kg.
25.	492	Engineering Products Sl.No. C498	Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C498	Iron Ore Pellets (from Haematite Ore)	1000 kgs.	1. Iron Ore Fines	1000 kg.
			2. Lime stone/ Dolomite	29 kg.
			3. Bentonite	5 kg.
			4. Chromium based grinding media having 10-18% chromium content in the steel balls of different diameters	0.4 kg.
			5. Furnace Oil	37 kg.
			6. Flocculent	0.0017 kg.
26.	516	Engineering Products Sl.No. C527	1. In the description of the resultant product the words "(from Wire Rod)" shall be deleted. The existing import item No. 1 alongwith its quantity shall be substituted by following:-
			"1. (a) Stainless Steel wire Rod OR	1060 kgs
			1. (b) Stainless Steel will of 1.2mm and above for redrawing of thinner wire	1020 kgs
			The existing import item No.7 alongwith its quantity shall be substituted by following :-
			"7(a) Used/New Plastics Bobbins/Spools OR	300Nos
			7. (b) ABS/Polystrene for making Plastics content	1.05 Kg/kg Bobbins/Spools of Plastic Bobbins/ Spools in the export product
The existing note below the standard norms C-527 shall be numbered as "NOTE No.(1). and thereafter the following shall be added "(2) The import item 1 (b) shall be permitted for import only if the product to be exported is of dia 1 mm and below".
27.	525	Engineering Products Sl.No. C589	Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C589	Cabinet made of CRCA	1 kg	1. Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary	1.05 kg/kg content in the export product.
			2. 6 Leverlock with dead locking Mechanism (relevant)	1 No. (net to net)
			3. Round Spindle Handle (relevant)	1 No. (net to net)
			4. 3 Ply Carton	(as per packing policy)
28.	530	Engineering Products Sl.No.C-635	The description and quantity of import item No. 1 shall be amended as follows:- The word "OR" shall be deleted. 2. The following quantity shall be permitted for import against import item No. 1:- 1. Pig Iron - 0.96 MT 2. Steel Scrap - 0.24 MT
29.	609	Engineering Products Sl.No. C1058	The Norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C1058	Lead Acid Battery	1 kg	1. a) Pure Lead	1.02 Kg/kg content in the export product
			1. b) Antimony OR	1.02 Kg/kg content in the export product
			1. c) Antimonial Lead Alloy	1.02 Kg/kg content in the export product
			2. Battery Separators OR	Net to Net
			2. Roll of Battery Separators OR	1.05 Sq.Mtr/ Sq.Mtr. content in the export product
			2. a) Synthetic Pulp Porous Paper Sheet	1.14 Kg/kg content in the export product
			2. b) Acid Reistent Glass Mat Sheet	1.14 Kg/kg content in the export product
			2. c) Nitrile Rubber Based Glue	1.14 Kg/kg content in the export product
			3. Tubular Bags	Net to Net
			4. Relevant Battery Cell Container and Lids/Relevant Battery Container and Lids OR	Net to Net
			4. Polypropylene Granules	1.05 Kg/kg content in the export product
			5. Battery Vent Plugs	Net to Net
			6. Polarity Indicator Rings	Net to Net
			7. Rubber Grommet	Net to Net
			8. Electrolytic Copper	Net To Net
			9. Pure Tin	1.02 Kg/kg content in the export product
			10. Lignin	1.02 Kg/kg content in the export product
30.	649	Engineering Products Sl.No.C-1218	The description of the import Item No. 1 shall be amended as "Lamp Black/ Thermal Black" instead of "Lamp Block/Thermal Block".
31.	565	Engineering Products Sl.No.C-1265	The norm covered by this entry shall be substituted by the followsing

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C1265	Stud	1 kg	1. MS/ Alloy Steel/ Bars/ Rods	1.15 kg.
32.	29	Engineering Products Sl.No.C1467 (Introduced vide Public Notice No.26 dated 4.8.99)	The description of the export item shall be amended to read as under:- "Brake Drum made of Alloy Cast Iron (Rough Castings)".
"Note:- In the case of Machined Castings the above quantities of import items at each Sl.No. 1 to 5 are to be multiplied by factors as given below:- a) Less than 10 kg/piece - 1.36 b) 10 kgs. to 100 kgs/piece - 1.25"
33.	724	Handicrafts Sl.No.F7	The description of the import item No.1 & 2 shall be amended to read as:- "Relevant Wood"
34.	830	Plastic Products Sl.No.H194	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
H194	Plastic shaving/ household Brushes	1 kg	1. Relevant Nylon/ PP/ PVC Mono filament Bristles	1.05 kg/kg content of the relevant items in the export product
			2. Relevant Polymers like ABS/ Granules/ PP Granules/ HIPS Granules	1.05 kg/kg content of the relevant items in the export product
			3. Relevant Dyes	Upto 1% weight of Polymer content at 1 above
35.	951	Miscellaneous Products Sl.No.K74	The following may be added after import item No.2: "OR 2. White prepared pigments -10 Kgs." The following shall be added at the end of the Note:- "and import of white prepared pigments shall be allowed only in the case of export of sanitary ware (white)".

Annexure "B" to the
Public Notice No. 46
Dated: 03/01/2000

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
A2320	Cinnamic Aldehyde	1 kg	1. Benzaldehyde	0.908 kg
A2321	Allopurinol	1 kg	1. Cyano Acetamide	1.50 kg
			2. Triethyl Ortho- formate	3.17 kg
			3. Formamide	1.50 kg
A2322	Low Active manesia types Catalyst (Nickel impregnated an Magnesia support Nickel content 6 +/- 1% Bulk density = 0.95 to 1.15 kg / Litre	1 Cubic meter	1. Nickel Metal	71.14 kg
			2. Magnesium Oxide	920.00 kg
			3. Alumina Powder	27.80 kg
			4. Methyl hydroxy Ethyl Cellulose	41.00 kg
A2323	FCMIC Chloride	1 kg	1. 2-Fluoro-6-Chloro Benzalde-hyde	1.141 kg
			2. Hydroxyl amine Sulphate	0.760 kg
			3. Methyl Aceto Acetate	1.090 kg
			4. Chloroform	1.345 kg
			5. Sodium Hydroxide	1.076 kg
A2324	Aseptic Packaging aluminium Foil of Thickness less than 0.2 mm backed by paper & LDPE	1 MT	1. Relevant Duplex Paper Board/ Bleached Paper Board	1.10 MT/MT content in the export product
			2. Aluminium Foil	1.10 MT/MT content in the export product
			3. LDPE Granules	1.12 MT/MT content in the export product
			4. LLDPE Granules OR 4. HDPE Granules	1.12 MT/MT content in the export product
			5. Ethylene Acrylic Acid Co-polymer Granules	1.10 MT/MT content in the export product
			6. Polypropylene Strips (1"width)	8 kg
A2325	Alpha Cypermethrin Tech. 97%	1 kg	1. A(i) D.V. Ester	0.655 kg
			1. A(ii) Thionyl Chloride	0.365 kg
			1.A (iii)Caustic Soda Flakes OR	0.233 kg
			1. B(i) DV Acid Chloride	0.595 kg
			1. B. (ii) Caustic Soda Flakes OR	0.111 kg
			1. C(i) T-Butanol	0.482 kg
			1. C. (ii) Acrylonitrile	0.393 kg
			1. C (iii) Acetonitrile	0.116 kg
			1. C (iv) Tri Ethyl Amine	0.320 kg
			1. C (v) Carbon Tetra Chloride	1.144 kg
			1. C (vi) Thionyl Chloride	1.110 kg
			1. C (vii) Dimethyl Formamide	0.048 kg
			1. C (viii) Caustic Soda Flakes	2.052 kg
			1. C (ix) Hexane	1.707 Litre
			2. Meta Phenoxy Benzaldehyde OR	0.542 kg
			2. (i) Benzaldehyde	0.433 kg
			2. (ii) Liquid Bromine	0.330 kg
			2. (iii) Mono Ethylene Glycol	0.222 kg
			2. (iv) Phenol	0.325 kg
			2. (v) Potassium Hydroxide	0.230 kg
			2. (vi) Aluminium Chloride	0.542 kg
			3. Tetra Butyl Ammonium Bromide	0.0044 kg
			4. Sodium Cyanide	0.122 kg
			5. Hexane	0.375 kg
			6. Tri Ethyl Amine	0.400 kg
			7. Caustic Soda Flakes	0.816 kg
A2326	Activated Nickel hydroxide (Mass) Powder (Containing min. 95% Nickel Hydroxide Powder)	1 kg	1. Nickel Hydroxide Powder	0.98 kg
A2327	Activated Cadmium hydroxide (Mass) Powder (Containing min. 80% Cadmium oxide Powder)	1 kg	1. Cadmium Oxide Powder	0.823 kg
A2327		1 kg	2. Graphite Flakes/ Powder	0.204 kg
A2328	Double Perforated Steel strip (below 40 mm)	1 kg	1. Cold Rolled Steel Strip	1.05 kg
A2329	Ethion Tech. 50% EC (W/V)	1 Ltr.	1. Ethion Tech. 92%	0.5434 kg.
			2. Emulsifier (An-Ionic & Non Ionic) Stansurf-4466)	0.060 kg
			3. Solvent C-9	0.396 kg
A2330	Cefuroxime Axetil Crystaline	1 kg	1. Cefuroxime Acid	1.00 kg
			2. Acetyl Bromide	0.598 kg
			3. N N Dimethyl Acetamide	2.80 kg
			4. Ethyl Acetate	4.21 kg
			5. Activated Carbon	0.05 kg
A2331	Cefuroxime Axetil Amourphous	1 kg	1. Cefuroxime Acid	1.187 kg
			2. Acetyl Bromide	0.71 kg
			3. N N Dimethyl Acetamide	3.33 kg
			4. Ethyl Acetate	5.00 kg
			5. Acetone	2.497 kg
			6. Activated Carbon	0.05 kg
A2332	Frambinon 4- (4- hydroxyphenyl) -2- butanone	1 kg	1. Acetone	0.176 kg
			2. Formaldehyde	0.306 kg
			3. Phenol	0.715 kg
			4. Toluene	0.691 kg
A2333	1-Hydroxy Ethylidene Diphosphonic Acid Disodium Salt 95% (Maxinol DS)	1 kg	1. Yellow Phosphorous	0.260 kg
A2334	Nickel Based Catalyst on Magnesia Support (nickel oxide content 6.6%)	1 MT	1. Nickel Metal	50 kg
A2334		1 MT	2. Magnesia support	953 kg
A2335	Benzyl Benzoate	1 kg	1. Benzyl Chloride	0.663 kg
A2335	Benzyl Benzoate	1 kg	2. Sodium Benzonate	0.755 kg
A2336	Oxydemeton Methyl Tech. 50%	1 kg	1. Mixed Xylene/ Methyl Iso Butyl Ketone OR Mono Chloro Benzene	0.511 kg
A2337	Plaster of Paris (Dental Grade)	1 kg	1. Hydrocol Cement	0.975 kg
A2338	Loratadine	1 kg	1. 3-Chlorobenzyl Chloride	10.035 kg
			2. Ethyl Nicotinate	10.035 kg
			3. N-methyl-4-Chloro Piperidine	1.844 kg
			4. N, N - Dimethyl Carbonyl Chloride	5.00 kg
			5. N, N - Di-isopropyl Amine	0.50 kg
			6. Acetonitrile	16.50 kg
			7. Tetra Hydrofuran	22.00 kg
			8. Methylene Chloride	22.00 kg
A2339	Patent Blue V-C I No. 42051 (Dye content 85%)	1 kg	1. Meta Hydroxy Benzaldehyde	0.272 kg
A2340	Acid Black 194-145% (100% Dye content)	1 kg	1. 6, Nitro - 1 - Diazo - 2 Naphthol - 4 - Sulfonic Acid OR	0.641 kg
			1. a) Beta Naphthol	0.448 kg
			1. b) Sodium Nitrite	0.410 kg
			2. Beta Naphthol	0.313 kg
A2341	Cobalt Silicate (Containing: Cobaltic oxide 67%)	1 kg	1. Cobalt oxide (Cobaltic Oxide)	0.691 kg
A2342	Praseodymium Yellow (Containing : Zirconium Oxide 60% praseodymium Oxide 5%)	1 kg	1. Zirconium Oxide	0.620 kg
A2342		1 kg	2. Praseodymium Oxide	0.052 kg
A2343	Red Brown (Containing : Chromium Oxide 39%)	1 kg	1. Chromium Oxide	0.400 kg
A2344	Chrome Green (Containing: Chromium Oxide 92%)	1 kg	1. Chromium Oxide	0.948 kg
A2345	Parrot Green (Containing: Zirconium Oxide 67%, Praseodymium Oxide 5%)	1 kg	1. Zirconium Oxide	0.691 kg
			2. Praseodymium Oxide	0.052 kg
			3. Ammonium Meta Vanadate	0.032 kg
A2346	Zirconium Grey (Dark Grey) (Containing: Zirconium Oxide 62%)	1 kg	1. Zirconium Oxide	0.640 kg
A2346		1 kg	2. Ammonium Meta Vanadate	0.080 kg
A2347	Cobalt Blue (Containing: Cobaltic Oxide 67%)	1 kg	1. Cobalt Oxide (Cobaltic Oxide)	0.691 kg
A2348	Coral Pink (Containing: Zirconium Oxide 58%)	1 kg	1. Zirconium Oxide	0.600 kg
A2349	Mustard Yellow (Containing: Stannic Oxide 86%, Antimony Trioxide 9%)	1 kg	1. Stannic Oxide (Tin Oxide)	0.887 kg
A2349		1 kg	2. Antimony Trioxide	0.093 kg
A2350	Vanadium Blue (Containing: Zirconium Oxide 63%)	1 kg	1. Zirconium Oxide	0.650 kg
A2350	Vanadium Blue (Containing: Zirconium Oxide 63%)	1 kg	2. Ammonium Meta Vanadate	0.080 kg
A2351	Burgundy (Containing: Stannic Oxide 62%, Chromium Oxide 9%)	1 kg	1. Stannic Oxide (Tin Oxide)	0.640 kg
A2351	Burgundy (Containing: Stannic Oxide 62%, Chromium Oxide 9%)	1 kg	2. Chromium Oxide	0.093 kg
A2352	Zirconium Yellow (Containing: Zirconium Oxide 58%)	1 kg	1. Zirconium Oxide (Tin Oxide)	0.600 kg
A2352	Zirconium Yellow (Containing: Zirconium Oxide 58%)	1 kg	2. Ammonium Meta Vanadate	0.095 kg
A2353	Jade Green (Containing: Zirconium Oxide 62%, Praseodymium Oxide 5%)	1 kg	1. Zirconium Oxide	0.640 kg
			2. Praseodymium Oxide	0.050 kg
			3. Ammonium Meta Vanadate	0.040 kg
A2354	Ivory (Containing: Zirconium Oxide 60%, Praseodymium Oxide 4.5%)	1 kg	1. Zirconium Oxide	0.620 kg
			2. Praseodymium Oxide	0.045 kg
			3. Ammonium Meta Vanadate	0.022 kg
A2355	Sodium Lauryl Ether Sulphate (active matter 69% minimum)	1 kgm	1. Lauryl alcohol	0.366 kg
			2. Sulphur	0.060 kg
			3. Caustic Soda Flakes	0.075 kg
A2356	Cocomonoetharo-lamide 4 mole Ethoxylate	1 kg	1. Coconut fatty Acid	0.505 kg
A2356	Cocomonoetharo-lamide 4 mole Ethoxylate	1 kg	2. Monoethenolamine	0.146 kg
A2357	Cobalt Chloride Hexa Hydrate	1 kg	1. Broken Cobalt Metal Electrodes	0.262 kg/kg
A2358	Cobalt Oxide	1 kg	1. Broken Cobalt Metal Electrodes	0.789 kg/kg
A2359	Formo Sulphathiazole	1 kg	1. Sulpha thiazole	1.00 kg
A2359	Formo Sulphathiazole	1 kg	2. Isopropyl Alcohol	0.25 kg
A2360	Poly Vinyl Formal Resin	1 kg	1. Vinyl Acetate Monomer	1.690 kg
			2. Paraformaldehyde	0.462 kg
			3. Poly Vinyl Alcohol	0.100 kg
A2361	Reinforced Steel wire - braided Rubber Hose containing Minimum 35% relevant Synthetic rubber in the Rubber compound	1 kg	1. Hose Reinforcement Steel wire. (Brass Plated of relevant thickness)	1.05 kg/kg content in the export product
			2. Relevant Textile Yarn (Cotton, Polyester, Rayon)	1.05 kg/kg content in the export product
			3. Input for 1 kg Rubber compound in the export product i) Relevant Synthetic Rubber (Polychloroprene Rubber/ NBR/ EPDM/ SBR)	0.37 kg
			3. ii) Carbon Black	0.47 kg
			3. iii) Plasticiser/ Oil (Thiokol)	0.055 kg
			3. iv) Rubber Chemicals (Accelerators, Antioxidants, Retarders, Bonding Agents, Peptizers, Sulphur, Wax, Resins, Magnesium oxide, Dispersing Agents, Precipitated Silica)	0.030 kg
			3. v) Filler (China Clay)	0.105 kg
Note: (1) Relevant Item No.2 above is to be allowed if hose is impregnated with relevant textile cover (2) Under S.No. 3(i) NBR is to be allowed only if the hose is oil resistant. (3) Under import of item at S.No.3(iv), the quantity of Antioxidants shall not exceed 0.015 kg and the value of total rubber chemicals shall not exceed 7% of f.o.b. value of export
A2362	3, 4 - Dichloro Aniline	1 kg	1. Para Nitro Chloro Benzene	1.350 kg
A2363	Acid Black 194-160% (69% Dye-content)	1 kg	1. Beta Naphthol	0.510 kg
			2. Sodium Nitrite	0.280 kg
			3. Twitchell Oil	0.020 kg
A2364	Acid Black 194-115% (49% Dye content)	1 kg	1. Beta Naphthol	0.371 kg
			2. Sodium Nitrite	0.203 kg
			3. Twitchell Oil	0.020 kg
A2365	Acid Black 194-215% (100% Dye content)	1 kg	1. 6 Nitro 1 Diazo Naphthol 4 Sulfonic acid (OR)	0.641 kg
			1. a) Beta Naphthol	0.448 kg
			1. b) Sodium Nitrite	0.410 kg
			2. Beta Naphthol	0.313 kg
A2366	Benzalphthalide	1 kg	1. Phenyl acetic acid	0.681 kg
A2366	Benzalphthalide	1 kg	2. Phthalic anhydride	0.740 kg
A2367	Synthetic Resin Master Batch containing 60% propylene (Homo Polymer) and 40% Synthetic Resin (Arkon P-140)	1 kg	1. Polypropylene (Homo polymer film grade)	0.624 kg
A2367		1 kg	2. Synthetic Resin (Arkon P-140)	0.416 kg
A2368	Paper Cones made of relevant paper board	1 kg	1. Relevant Kraft/Grey Paper Board (180 GSM to 310 GSM)	1.39 kg
A2369	Multilayer Foiless Plastic Laminated tubes with or without Caps (5 ply Printed)	1 kg	1. LDPE Granules	1.17 kg/kg content in the export product
			2. LLDPE Granules	1.17 kg/kg content in the export product
			3. Polyester Film	1.12 kg/kg content in the export product
			4. Master Batch (70% Titanium Di-Oxide)	1.12% of weight of LDPE Granules in the export product
			5. U.V. Ink	0.5% of weight of LDPE/ LLDPE in the export product
			6. U.V. Varnish	0.3% of weight of LDPE/ LLDPE in the export product
			7. HDPE Granules (for Shoulder of tubes)	1.05 Kg/Kg content in the export product
			8. Polypropylene Granules (for caps)	1.05 Kg/Kg content in the export product

Annexure "C" to the
Public Notice No. 46
Dated: 03/01/2000

ENGINEERING PRODUCTS

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
C1480	Washing Machine (Semi Automatic)	1 No.	1. Washer - P	Net to Net
			2. Belt. V	Net to Net
			3. Door SW ASM	Net to Net
			4. Buzzer ASM	Net to Net
			5. Capacitor	Net to Net
			6. Gear Case Assembly	Net to Net
			7. Plunger Valve Strap	Net to Net
			8. Timers	Net to Net
			9. Block Brake	Net to Net
			10. Motors (Relevant)	Net to Net
			11. P.V. Bellow	Net to Net
			12. Net	Net to Net
			13. Bellows ASM	Net to Net
			14. Power Cord	Net to Net
			15. Adapter	Net to Net
			16. Polypropylene Resin	7.233 Kgs
			17. Resin ABS	0.2 Kgs
C1481	Battery type NCSP-B-40600D (Nickel Cadmium batteries) 24 Volts, 40 AH.	1 No	1. Nickel Fibremat Fibrex OR	40.00 sq. ft.
			1. Nickel Powder	4.48 kgs
			2. Nylon moulding granules/powder	4.10 kgs
			3. Nonwoven Separator (Viledon) FS 2115	18.00 sq.mtr
			4. Nickel Powder type 255/287/210	4.00 kgs
			5. Celgard 3400 film	16.00 sq.mtr
			6. Battery connector	1 No.
			7. Metregrip 303 LV epoxy adhesive activator	0.50 Ltrs
			8. Metregrip 303 LV Epoxy Adhesive base.	0.50 Ltrs
C1482	Pneumatic Demolition Tool	1 No.	1. Valve Assembly & Case	One No. each on net to net basis
			2. Valve Case Cover
			3. Valve
			4. Valve Case Spacer
			5. Retainer latch
			6. Bushing Latch
			7. Back Head Complete
			8. Throttle Lever
			9. Front Head
			10. Front Head Spring
			11. Fron Head Bolt
			12.Retainer Latch Pin (outer)
			13.Air Inlet Nut
			14.Anvil Block
			15.Anvil Block Bushing
			16.Piston
			17.Back Head Bolt
			18.Air Inlet Swivel
			19.Cyliner
			20.Retainer Latch Pin (inner)
Not:- The firm shall account for each of the above input in the export product.
C1483	Pneumatic Tools Chipper-I"to 4" Cylinder	1 No.	1. Throttle Valve	One No. each on net to net basis.
			2. Throttle Valve Tube
			3. Bushing-Permanent
			4. Throttle Lever
			5. Handle
			6. Upper Valve case Lid
			7. Valve Case
			8. Piston
			9. Cylinder
			10. Retainer
			11. Bushing-Round/ Hex
			12. Collar Lock
			13. Exhaust Shield
Not:- The firm shall account for each of the above input in the export product.
C1484	ALPVCP VCSWP VC (1.1kv)	3x 240 Sq. mm	1. Al. Ingot/Rod	2.024Kg. per m
			2. PVC Resin	1.053Kg.per m
			3. DIDP	.3786 Kg.per m
C1485	ALPVCSWPVC (1.1kv)	1x 150 Sq. mm	1. Al. Ingot/Rod	0.426 Kg.per m
			2. PVC Resin	0.215 Kg.per m
			3. DIDP	.0774 Kg.per m
C1486	ALPVCPVCSWPVC (1.1kv)	3.5x 95 Sq. mm	1. Al. Ingot/Rod	0.970 Kg.per m
			2. PVC Resin	0.587 Kg.per m
			3. DIDP	.218 Kg.per m

Annexure "D" to the
Public Notice No. 46
Dated: 03/01/2000

MISCELLANEOUS PRODUCTS

K121	Pressure Bandage	1 No.	1. Non-Woven Fabric (67% Viscose and 33% Polyester) of relevant GSM	1.05 Kg/kg content in the export product
K121	Pressure Bandage	1 No.	2. Elastic Guage bandage of relevant width and length	Net to net
K122	Disposable Diaper (Contour shape) Size-Small Diaper Length (mm) 400(+/- 10 mm) Diaper width (mm) 305 (+/- 10 mm) Weight (gms) 29-34	1000 Nos.	1. Cellulose based Wood Pulp (Untreated)	25.27 kgs.
			2. Tissue (15-20 gsm)	2.18 kgs.
			3. Super Absorbent Polymer (Sodium Poly Acrylate Based Polymer	4.19 kgs.
			4. Polypropylene Hydrophillic Non-woven Fabric (15-20 gsm)	0.166 kgs.
			5. Polyethylene Film	3.280 kgs.
			6. Elastic Rubber Threads (6-8 strands)	0.154 kgs.
			7. Hotmelt Construction Adhesive	0.568 kgs.
			8. Hotmelt Elastic Adhesive	0.433 kgs.
			9. Release Tape (Polypropylene based)	2.0 sq. meter
			10. Fastening Tape (Polypropylene based)	3.2 sq. meter
			11. Frontal Tape (Polypropylene based)	8.7 sq. meter
K123	Disposable Diaper (Contour shape) Size-Medium Diaper Length (mm) 450(+/- 10 mm) Diaper width (mm) 320 (+/- 10 mm) Weight (gms) 37-43	1000 Nos.	1. Cellulose based Wood Pulp (Untreated)	30.63 kgs.
			2. Tissue (15-20 gsm)	2.66 kgs.
			3. Super Absorbent Polymer (Sodium Poly Acrylate Based Polymer	5.07 kgs.
			4. Polypropylene Hydrophillic Non-woven Fabric	0.174 kgs.
			5. Polyethylene Film	3.80 kgs.
			6. Elastic Rubber Threads (6-8 strands)	0.190 kgs.
			7. Hotmelt Construction Adhesive	0.693 kgs.
			8. Hotmelt Elastic Adhesive	0.481 kgs.
			9. Release Tape (Polypropylene based) (width-38 mm(+/-10 mm)	2.04 sq. meter
			10. Fastening Tape (Polypropylene based) (width-60.325 mm(+/- 10 mm)	3.25 sq. meter
			11. Frontal Tape (Polypropylene based) (width 8.75 inches (+/- 1inch)	8.70 sq. meter
K124	Disposable Diaper (Contour shape) Size-Large Diaper Length (mm) 470(+/- 10 mm) Diaper width (mm) 330 (+/- 10 mm) Weight (gms) 46-54	1000 Nos.	1. Cellulose based Wood Pulp (Untreated)	38.28 kgs.
			2. Tissue (15-20 gsm)	2.86 kgs
			3. Super Absorbent Polymer (Sodium Poly Acrylate Based Polymer	6.39 kgs
			4. Polypropylene Hydrophillic Non-woven Fabric (15-20 gsm)	0.183 kgs
			5. Polyethylene Film	4.04 kgs.
			6. Elastic Rubber Threads (6-8 strands)	0.230 kgs.
			7. Hotmelt Construction Adhesive	0.866 kgs.
			8. Hotmelt Elastic Adhesive	0.481 kgs.
			9. Release Tape (Polypropylene based) (width-38 mm(+/-10 mm)	2.04 sq. meter
			10. Fastening Tape (Polypropylene based) (width-60.325 mm(+/- 10 mm)	3.25 sq. meter
			11. Frontal Tape (Polypropylene based) (width 9.5 inches (+/- 1inch)	9.44 sq. meter

Annexure "E" to the
Public Notice No. 46
Dated: 03/01/2000

TEXTILE PRODUCTS

The description of export item in the existing entry at S.No. J-92 (page No. 904) shall be amended to read as under:-

"100% Cotton Fabric - Dyed".

Further after the existing entry at S.No. J-307 a new entry at S.No. J-308 shall be added as under:-

Sl.No.	Item of Export	Qty.	Item of Import	Qty. Allowed
J-308	100% Cotton yarn Dyed Fabric/Made ups	1 kg	1. Cotton yarn	1.10 kg
			2. Polyvinyl Alcohol (PVA) Sizing Materials	0.01 kg
			3. Sodium Hydro Sulphite	0.02 kg
			4. Vat Dyes/ Reactive Dyes (100% Strength)	0.

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password