Attention is invited to Paragraph 7.8 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8, 7.9 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002 as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export & Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2 - 1997-2002, as amended.
3. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.
4. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl.No.A-2160, the new entries from Sl.No.A-2161 to A-2181 shall be added as per Annexure "B" to this Public Notice.
After the existing entry at Sl.No.B-226, the new entry as Sl.No.B-227 shall be added as per Annexure "C" to this Public Notice.
After the existing entry at Sl.No.C-1385, the new entries from Sl.No.C-1386 to C-1400 shall be added as per Annexure "D" to this Public Notice.
After the existing entry at Sl.No.E-71, the new entry as Sl.No.E-72 shall be added as per Annexure "E" to this Public Notice.
After the existing entry at Sl.No.H-397, the new entries from Sl.No.H-398 to H-400 shall be added as per Annexure "F" to this Public Notice.
After the existing entry at Sl.No.I-24, the new entry as Sl.No.I-25 shall be added as per Annexure "G" to this Public Notice.
5. This issues in Public interest.
| (1) | (2) | (3) | (4) | (5) |
|---|
| A1903 | Nalidixic Acid | 1 kg | 1. 2-Amino & Picoline | 1.013 kg |
| 2. Ethoxy Methylene Malonic Ester | 2.078 kg |
| 3. Dimethyl Formamide | 4.780 kg |
| 8. | 267 | Chemicals & Allied Products Sl.No.A1986 | The norms covered by this entry shall be substituted by the following :- |
| (1) | (2) | (3) | (4) | (5) |
|---|
| A1986 | Dressed Marble Blocks | 1 Cubic Meter | 1. Consumables, namely:-
Diamond Beads/ Pearls/Wire | 80 Nos. |
| 9. | 270 | Chemicals & Allied Products Sl.No.A2013 | The description of import item No.1 shall be amended to read as under:-
"N-Acetyl Sulfanilyl Chloride (N-ASC)".
The quantity will reamin unchanged. |
| 10. | 427 & 428 | Engineering Products Sl.No.C278 | In item No.6, the following alternative item with quantity shall be added:- |
"OR
Copper Ingots/ Bars/Rods (Electrolytic Grade)" | 1.02 kg/kg content in export. |
| 11. | 437 | Engineering Products Sl.No.C311 | In item No.6, the following alternative item with quantity shall be added:- |
"OR
Copper Ingots/ Bars/Rods (Electrolytic Grade)" | 1.02 kg/kg content in export." |
| 12. | 441 | Engineering Products Sl.No.C323 | The description of import item 1 shall be amended to read as under:-
"CRGO Steel in Coil form/CRNGO Steel Sheet/Coil"
The quantity will remain unchanged. |
| 13. | 465 & 466 | Engineering Products Sl.No.C430 | The description of the import item 1 shall be amended to read as under:-
"Carbon Steel Sheet/Coil/Strip"
The quantity will remain unchanged. |
| 14. | 526 | Engineering Products Sl.No.C594 | In import item 1, the following alternative item with quantity shall be added:- |
"OR
Carbon Steel Seamless mother pipes (hot finish)" | 1.35 MT |
| 15. | 545 | Engineering Products Sl.No. C727 | The description of the export product shall be amended to read as under:-
"MS Window, Door, Ventilator, Grate/ Grille Fabricated Frames and component parts thereof". |
| 16. | 547 | Engineering Products Sl.No.C741 | The description of the export product shall be amended to read as under:-
"OTS Cans for packing 100-500 gms. of instant coffee". |
| 17. | 561 | Engineering Products Sl.No.C845 | 1. The description of the export product shall be amended to read as under:-
"Steel Fire Resisting Filing Cabinets fitted with combination locks (consisting of Locks, Dail and Dail Rings)".
2. The description of import item 1 shall be amended to read as under:-
"Combination Locks (consisting of Locks, Dail and Dail Rings)". |
| 18. | 562 | Engineering Products Sl.No.C852 | 1. The description of the export product shall be amended to read as under:-
"Steel Safes fitted with combination locks (consisting of Locks, Dail and Dail Rings)".
2. The description of import item 1 shall be amended to read as under:-
"Combination Locks (consisting of Locks, Dail and Dail Rings)". |
| 19. | 570 | Engineering Products Sl.No.C902 | 1. The quantity of export product shall be amended to read as under:-
"1 MT (Connectors with/without Screws/Bolts and Locknut)".
2. In import item 3, the following alternative item with quantity shall be added:- |
"OR
Bolts | Net to net." |
| 20. | 571 & 572 | Engineering Products Sl.Nos.C917, C918, C920 and C921 | The norms covered by these entries Products shall be substituted by the following:- |
| (1) | (2) | (3) | (4) | (5) |
|---|
| C917 | Cutting Tools Single point of High Speed Steel (Cobalt Grade) | 1 kg | 1. High Speed Steel (Cobalt Grade) | 1.05 kg |
| C918 | Cutting Tools Single point of High Speed Steel (Non-cobalt Grade) | 1 kg | 1. Non-cobalt Bearing High Speed Steel (AISI M2 Grade of High Speed Steel) | 1.05 kg |
| C920 | Cutting Tools Multiple point of High Speed Steel (Non-cobalt Grade) | 1 kg | 1. High Speed Steel (Non Cobalt Grade) | 1.33 kg |
| C921 | Cutting Tools multiple point of High Speed steel (Cobalt Grade) | 1 kg | 1. High Speed Steel (Cobalt Grade) | 1.33 kg |
| 21. | 576 | Engineering Products Sl.No.C945 | The description of the export product shall be amended to read as under:-
"PCB Drills made from Solid Tungsten Carbide Blanks/Rods of diameter 1.51 mm to 6.50 mm". |
| 22. | 595 | Engineering Products Sl.No.C992 | The description of the export product shall be amended to read as under:-
"Bronze/Gun Metal Impellers for Pumps, all type." |
| 23. | 643 | Engineering Products Sl.No.C1165 | The description of the export product shall be amended to read as under:-
"Brass Blanks (Discs)/Brass Case Blanks (Discs)for defence application". |
| 24. | 677 | Engineering Products Sl.No.C1361 | 1. The description of import item No.1 with quantity shall be amended to read as under:- |
"CRGO Silicon Electrical Steel Sheets/Coils
OR | 6.60 kgs/KVA |
| Transformer Core Alloy Amorphous Electrical Steel" | 8.25 kgs/KVA |
| 2. After import item 6, the following additional item with quantity shall be added:- |
| "7. CRCA Sheets | 3.960 Kgs/KVA" |
3. Below this norms, the following note shall be added:-
"Note: 1)CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts." |
| 25. | 677 & 678 | Engineering Products Sl.No.C1362 | 1. The description of the import item 1 with quantity shall be amended to read as under:- |
"CRGO Silicon Electrical Steel Sheets/Coils
OR | 1.540 kgs/KVA |
| Transformer Core Alloy Amorphous Electrical Steel" | 1.925 kgs/KVA |
2. The quantity of import item No.2 shall be corrected to read as under :-
"1.606 Kgs/KVA"
3. After import item No.6, the following additional items with quantity shall be added:- |
| 7. CRCA Sheets | 0.440 Kgs/KVA |
8. Transformer Parts:
a)Porcelain Bushings (HV)
OR | 2 Nos. |
| Porcelain Bushings Assembly (H.V.) | 2 Nos. |
b)Porcelain Bushings (LV)
OR | 2 Nos. |
| Porcelain Bushings Assembly (L.V.) | 2 Nos. |
| 9. Magnetic Oil Level Gauge | 1 No. |
| 10. Pressure Vacuum Bleeder | 1 No. |
| 11. Oil Temperature Indicator | 1 No. |
4. Below this norm, the following notes shall be added:-
"Note: 1)CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts.
2)In case of item No.8, if the Transformer is for H.V., item 8(a)is to be allowed only. Similarly, in case of L.V., item 8(b)is to be allowed only." |
| 26. | 678 | Engineering Products Sl.No.C1363 | 1. The description of the import item No.1 with quantity shall be amended to read as under:- |
"CRGO Silicon Electrical Steel Sheets/Coils
OR | 1.155 kg/KVA |
| Transformer Core Alloy Amorphous Electrical Steel" | 1.445 kg/KVA |
| 2. After import item No.6, the following additional items with quantity shall be added:- |
| "7. CRCA Sheets | 0.198 Kg/KVA |
8. Transformer Parts:
a)Porcelain Bushings (HV)
OR | 2 Nos. |
| Porcelain Bushings Assembly (H.V.) | 2 Nos. |
b)Porcelain Bushings (LV)
OR | 2 Nos. |
| Porcelain Bushings Assembly (L.V.) | 2 Nos. |
| 9. Magnetic Oil Level Gauge | 1 No. |
| 10. Pressure Vacuum Bleeder | 1 No. |
| 11. Oil Temperature Indicator | 1 No. |
3. Below this norm, the following notes shall be added:-
"Note: 1)CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts.
2)In case of item No.8, if the Transformer is for H.V., item 8(a)is to be allowed only. Similarly, in case of L.V., item 8(b)is to be allowed only." |
| 27. | 682 & 683 | Engineering Products Table 3 | After column pertaining to Zinc coating weight of 275 gms/Sq.mtr. and against Sl.Nos.1 to 29, the addition as per ANNEXURE "H" to this Public Notice shall be added in seriatum. |
| 28. | 722 | Food Products Sl.No.E64 | 1. The description of the export product shall be amended to read as under:-
"Whey Protein Concentrate 80%".
2. Below this norm, the following note shall be added:-
"Note: In case of export of different percentage of Whey Protein Concentrate, the requirement of inputs may be worked out on pro-rata basis." |
| 29. | 793 & 794 | Plastic Products. Sl.No.H18 | The description of import item 2 shall be corrected to read as under:-
2. Polystyrene Granules/High Impact Polystyrene (Moulding Grade)". The quantity will remain unchanged. |
| 30. | 872 | Plastic Products Sl.No.H382 | 1. The description of the export product shall be amended to read as under:-
"Fibreglass Tissue with UF/PF Resin content minimum 17%".
2. Below this norm, the following note shall be added:-
"Note: The import of item No.2 i.e. Fibreglass Yarn shall be permitted only when the export product i.e. Fibreglass Tissue is reinforced with fibre glass yarn. The description of export product shall be modified accordingly.' |
| Sl. No. | Export Item | Import Item |
| Name | Qty. | Name | Qty. |
| (1) | (2) | (3) | (4) | (5) |
|---|
| A2161 | Mosquito Repellent Cream containing 10% N,N-Di-Ethyl Benzamide | 1 kg (Net Weight of Cream) | 1. Distearyl Di-Ammonium Chloride | 0.06 kg |
| 2. Ceto Stearyl | 0.04 kg |
| 3. Glycerine | 0.02 kg |
| 4. N,N-Di-Ethyl Benzamide | 0.10 kg |
| A2162 | Eugenol/Iso Eugenol | 1 kg | 1. Clove Leaf Oil | 1.10 kg |
| A2163 | Guanine | 1 kg | 1. Sodium Cyanide | 0.80 kg |
| 2. N-Butanol | 1.20 kg |
| 3. Guanidine Nitrate | 1.51 kg |
| 4. Sodium Nitrite | 0.40 kg |
| 5. Hydrazine Hydrate (80%) | 0.646 kg |
| 6. Formamide | 0.37 kg |
| A2164 | 2,4 D-Dimethylamine Salt (2,4 D-Amine) | 1 kg | 1. Phenol | 0.427 kg |
| 2. Dimethylamine | 0.340 kg |
| 3. Monochloroacetic Acid | 0.362 kg |
| 4. Caustic Soda | 0.304 kg |
| A2165 | Pseudo Ephedrine Sulphate | 1 kg | 1. Benzaldehyde FFC Grade | 4.50 Kg. |
| 2. Platinum of minimum 99.98% purity | 265 mg. |
| 3. Benzene | 7.05 Ltr. |
| 4. Acetone | 1.52 Kg. |
| 5. Methanol | 2.33 Ltr. |
| 6. Caustic Soda Flakes | 6.48 kg |
| 7. Monomethyl Amine | 1.63 kg |
| 8. Acetic Anhydride | 1.65 kg |
| 9. Activated Carbon | 0.08 kg |
| 10. Molasses (Total sugar content 45% to 55%) | 120.6 kg |
| Note: Before issue of licence, the procedure laid down in para 7.4(c)of HBP, Vol.I shall be followed. |
| A2166 | Ceramic Overfeed Plate (High Alumina content) | 1 kg | 1. Calcined Alumina | 1.05 kgs |
| 2. Polythelene Glycol 20000 | 6.15 gms |
| 3. Phenothiazine | 0.073 gms |
| 4. Synthetic Industrial Diamond, Power, Diamond Grinding Wheel | Upto 5% of FOB value of export. |
| A2167 | Meta (Ortho Toluidino)Phenol | 1 kg | 1. Resorcinol | 0.65 kg |
| A2168 | Turbufos Technical 85% | 1 kg | 1. Yellow Phosphorus | 0.115 kg |
| 2. Sulphur | 0.295 kg |
| 3. Tertiary Butyl Mercaptan | 0.324 kg |
| 4. Formaldehyde 37% | 0.286 kg |
| A2169 | Bas Acid (4 Sulpho- Anthranilic Acid) | 1 kg | 1. Ortho Nitro Toluene | 2.075 kg |
| 2. Caustic Soda Flakes | 1.218 kg |
| 3. Soda Ash | 0.250 kg |
| A2170 | Methylol Amino Resins containing 65% sulfonated UF Resins, 20% PF condensate & 5% UF Resin (T-150) | 1 kg | 1. Phenol | 0.034 kg |
| 2. Formaldehyde(37%) | 0.589 kg |
| 3. Urea | 0.186 kg |
| 4. Caustic Soda (Solid) | 0.052 kg |
| 5. Dicarboxylic Acid (C4 - C6) | 0.088 kg |
| 6. Sodium Bisulfite | 0.495 kg |
| A2171 | 1-(3-Chloro) Phenyl-3-Methyl-5-Pyrazolone | 1 kg | 1. Aceto Acetic Methyl Ester | 0.60 kg |
| 2. Meta Chloro Aniline | 0.76 Kg |
| 3. Sodium Nitrite | 0.40 Kg |
| A2172 | Paramethoxy Ethyl Phenol | 1 kg | 1. Phenyl Ethyl Alcohol | 3.42 kg |
| 2. Dimethyl Sulphate | 3.54 kg |
| 3. Hydrazine Hydrate | 1.12 kg |
| 4. Sodium Nitrite | 0.59 kg |
| 5. Iso-Propyl Alcohol | 2.15 kg |
| 6. Activated Carbon | 0.10 kg |
| A2173 | Zinc Di Butyl Dithio Carbamate | 1 kg | 1. Di-Butyl Amine | 0.568 kg |
| 2. Zinc Chloride(40%) | 0.791 kg |
| 3. Carbon Di Sulphide | 0.344 kg |
| 4. Caustic Soda | 0.200 kg |
| A2174 | Solvent Yellow 93 | 1 kg | 1. 1-Phenyl 3-Methyl-5-Pyrazolane | 1.026 kg |
| 2. Dimethyl Formamide | 0.156 kg |
| A2175 | Meta Phenoxy Benzyl Alcohol | 1 Kg | 1. Benzaldehyde | 0.834 kg |
| 2. Liquid Bromine | 0.635 kg |
| 3. Phenol | 0.625 kg |
| 4. Mono Ethylene Glycol | 0.417 kg |
| 5. Potassium Hydroxy (min 88%) | 0.442 kg |
| 6. Aluminium Chloride Anhydrous | 1.042 kg |
| 7. Nickel | 0.0095 kg |
| A2176 | Cyclohexyl Isocyanate | 1 kg | 1. Cyclohexyl Amine | 0.932 kg |
| 2. Toluene | 0.933 kg |
| A2177 | Diethyl Carbamoyl Chloride | 1 kg | 1. Diethyl Amine | 0.634 kg |
| 2. Toluene | 0.592 kg |
| A2178 | 3,4 Dichloro Phenyl Isocyanate | 1 kg | 1. 3,4 Dichloro Aniline | 1.014 kg |
| 2. Toluene | 0.938 kg |
| A2179 | Pigment Red 8 Dispersion (35.5% pigment content) | 1 kg | 1. C.I.Pigment Red 8 | 0.355 Kg |
| 2. Surface Active Agent | 0.107 Kg |
| A2180 | Pigment Blue 15 Dispersion (32.5% pigment content) | 1 kg | 1. C.I.Pigment Blue 15 | 0.325 Kg |
| 2. Surface Active Agent | 0.131 Kg |
| A2181 | Garcinia Cambogia Powdered Extract having 50% SCA. | 1 Kg | 1. Garcinia Cambogia (Gorkaka) | 4.56 kg |
| Sl. No. | Export Item | Import Item |
| Name | Qty. | Name | Qty. |
| (1) | (2) | (3) | (4) | (5) |
|---|
| C1386 | Railway Bogie for Meter Gauge Wagons(Weight 14.2 MT) | 1 No. | 1. Non-Alloy Steel Scrap | 2.238 MT |
| 2. Ferro Manganese | 25 kgs |
| 3. Ferro Silicon | 21 kgs |
| 4. Welding Electrode | 7 kgs |
| 5. Grinding Wheel | 5 kgs |
| 6. Graphite Electrode | 6 kgs |
| 8. Industrial X Ray Film | 9440 Sq.cms. |
| 9. Furnace Oil/LDO | 212 ltrs. |
| C1387 | Table Compression Tools of Steel Bar | 1 Kg. | 1. Tool Steel Round | 1.35 Kg |
| C1388 | T-Rail Anchors made of Steel | 1 MT | 1. Carbon Steel Billets IS: 2830 | 1.05 MT |
| C1389 | Automotive Flexible Exhaust Connectors (Corrugated) made of Stainless Steel | 1 MT | 1. Stainless Steel Sheets/Coils (relevant grade) | 1.25 MT/MT content in export. |
| 2. Stainless Steel Wire/Rods (relevant grade) | 1.10 MT/MT content in export. |
| 3. Aluminised Steel Sheets/Coils (relevant grade) | 1.25 MT/MT content in export. |
| C1390 | Aluminium Gravity Die Castings | 1 MT | 1. Aluminium Scrap/Aluminium Ingots | 1.10 MT |
| C1391 | Mechanical Spray Pump (Mechanical) (20mm) | 1 No. | A. COMPONENTS
1. Body (Poly Ethylene) | 1 No. |
| 2. Stem (Poly Ethylene) | 1 No. |
| 3. Actuator (PE/PP) | 1 No. |
| 4. Inner Gasket/O Ring (Buna Rubber) | 1 No. |
| 5. Steel Ball (Stainless Steel 304) | 1 No. |
| 6. Aluminium Cap | 1 No. |
B. RAW MATERIALS
7. Aluminium Sheet (for Ferrules) | 2.60 gms. |
| 8. Plastic Granules (for Dip Tube) | 1.05 gm/gm content in export. |
| C1392 | Copper/Aluminium Conductors for XLPE Insulated Armoured/ Unarmoured PVC Sheathed Cable for 1100V/L.T. | 1 km | 1. Continuous Cast Copper Rod | 1.01 kg/kg content in the export product. |
| 2. Aluminium Ingots/Rods | 1.01 kg/kg content in the export product. |
| 3. XLPE Compound | 1.05 kg/kg content in the export product. |
4. PVC Compound
OR | 1.05 kg/kg content in the export product. |
| a)PVC Resin | 0.57 kg |
| b)Plasticizer | 0.11 kg |
| c)Lubricant | 0.01 kg |
| Note: The quantity of item 4.a, b)& c)given above are per kg of PVC Compound in export. |
| C1393 | Truck & Trailer Wheels | 1 No. (Weight 46 kgs +/-1%) | 1. Non-alloy Steel Plates for Rim (HSN No. 7208.52) | 24.43 kg |
| 2. Non-alloy Steel Plates for Disc (HSN No. 7208.51) | 24.64 kg |
| 3. Non-alloy Steel Sections for Ring Special 'Z' type Section (HSN No.7216.50) | 9.03 kg |
| C1394 | All Aluminium Alloy Conductors | 1 Kg. | 1.a)Primary Un-alloyed Aluminium Ingots /T-Bars / Sows | 1.01 Kg/kg content in export. |
| b)Magnesium | 1.05 Kg/kg content in export. |
| c)Silicon | 1.05 Kg/kg content in export. |
OR
Aluminium Alloy Ingots / T-Bars / Sos | 1.01 Kg/kg content in export. |
OR
Aluminium Alloy Wire Rods | 1.01 kg/kg content in export. |
| C1395 | Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers *0 Watt to 20 Watts | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in Coil form | 47.80 gms/Watt |
OR
CRCA Steel Sheets /Sheets in Coil form | 47.80 gms/Watt |
| 2. Copper Wire Bars / Cathods / Rods / Winding Wires / Strips | 10.41 gms/Watt |
| 3. Electrolytic grade Aluminium for Rotor | 10.00 gms/Watt |
| 4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity)for Housing | 10.00 gms/Watt |
OR
CRCA Sheets for Housing | 15.00 gms/Watt |
OR
Mild Steel Sheets for Housing | 10.99 gms/Watt |
5. EN-8 Alloy Steel for Shaft
OR
Stainless Steel for Shaft | 9.65 gms/Watt |
| 6. Ball/Sleeve/Roller Bearings | 2 Nos. (Net to net) |
| 7. Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| 8. Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| 9. Motor Protectors / Thermal Protectors / Thermo Strips | Net to net. |
| 10. Power Capacitor | 1 No. (Net to net) |
| 11. Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| 12. Terminals, Connectors | 8 Nos. each (Net to net) |
| C1396 | Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in oil form | 46.87 gms/Watt |
OR
CRCA Steel Sheets/Shets in Coil form | 46.87 gms/Watt |
| 2. Coper Wire Bars/Cathods/Rods/ Winding Wires/Strips | 7.19 gms/Watt |
| 3. Electrolytic grade Aluminium for Rotor | 5.58 gms/Watt |
| 4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity)for Housing | 6.00 gms/Watt |
OR
CRCA Sheets for Housing | 9.00 gms/Watt |
OR
Mild Steel Sheets for Housing | 8.36 gms/Watt |
5. EN-8 Alloy Steel for Shaft
OR
Stainless Steel for Shaft | 5.70 gms/Watt |
| 6. Ball/Sleeve/Roller Bearings | 2 Nos. (Net to net) |
| 7. Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| 8. Special packing material like Kraft Paper for export worthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| 9. Motor Protectors/ Thermal Protectors/Thermo Strips | Net to net. |
| 10. Power Capacitor | 1 No. (Net to net) |
| 11. Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| 12. Terminals, Connectors | 8 Nos. each (Net to net) |
| C1397 | Single Phase Shell construc tion motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in coil form | 33.82 gms/Watt |
OR
CRCA Steel Sheets/ Shets in Coil form | 33.82 gms/Watt |
| 2 Copper Wire Bars/ Cathods/Rods/ Winding Wires/ Strips | 4.98 gms/Watt |
| 3. Electrolytic grade Aluminium for Rotor | 2.80 gms/Watt |
| 4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity)for Housing | 2.80 gms/Watt |
OR
CRCA Sheets for Housing | 4.20 gms/Watt |
OR
Mild Steel Sheets for Housing | 4.88 gms/Watt |
5. EN-8 Alloy Steel for Shaft
OR
Stainless Steel for Shaft | 1.98 gms/Watt |
| 6. Ball/Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| 7. Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| 8. Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| 9. Motor Protectors/ Thermal Protectors/Thermo Strips | Net to net. |
| 10. Power Capacitor | 1 No. (Net to net) |
| 11. Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| 12. Terminals, Connectors | 8 Nos. each (Net to net) |
| C1398 | Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in Coil form | 20.76 gms/Watt |
OR
CCA Steel Sheets/ Sheet in Coil form | 20.76 gms/Watt |
| 2.Copper Wire Bars/ Cathods/Rods/ Winding Wires/ Strips | 2.76 gms/Watt |
| 3. Electrolytic grade Aluminium for Rotor | 2.80 gms/Watt |
| 4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity)for Housing | 2.80 gms/Watt |
OR
CRCA Sheets for Housing | 4.20 gms/Watt |
OR
Mild Steel Sheets for Housing | 4.88 gms/Watt |
5. EN-8 Alloy Steel for Shaft
OR
Stainless Steel for Shaft | 1.98 gms/Watt |
| 6. Ball/Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| 7. Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| 8. Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| 9. Motor Protectors/ Thermal Protectors/Thermo Strips | Net to net. |
| 10. Power Capacitor | 1 No. (Net to net) |
| 11. Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| 12. Terminals, Connectors | 8 Nos. each (Net to net) |
| C1399 | Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | 1. Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/Sheets in Col form | 19.39 gms/Watt |
OR
CRCA Steel Sheets/ Sheets in Coil form | 19.39 gms/Watt |
| 2. Coppe Wire Bars/ Cathods/Rods/ Winding Wires/ Strips | 1.89 gms/Watt |
| 3. Electrolytic grade Aluminium for Rotor | 1.63 gms/Watt |
| 4. Commercial Grade Aluminium in Ingot form (upto 99.5% purity)for Housing | 1.63 gms/Watt |
OR
CRCA Sheets for Housing | 2.44 gms/Watt |
OR
Mild Steel Sheets for Housing | 2.83 gms/Watt |
5. EN-8 Alloy Steel for Shaft
OR
Stainless Steel for Shaft | 1.18 gms/Watt |
| 6. Ball/Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| 7. Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| 8. Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| 9. Motor Protectors/ Thermal Protectors/Thermo Strips | Net to net. |
| 10. Power Capacitor | 1 No. (Net to net) |
| 11. Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| 12. Terminals, Connectors | 8 Nos. each (Net to net) |
| C1400 | Bicycle Frames made of Aluminium | 1 No. | 1. Aluminium Extruded Tubes of relevant size in terms of ID/OD | 1.02 kg/kg content in the export product. |
| 2. Filler Wire for Welding | 2% of net weight of the export product. |