1. In exercise of the powers conferred under paragraph 4.11 of the Export and Import Policy, 1997 -2002, the Director General of Foreign Trade hereby notifies the credit rates under DEPB scheme in respect ofthem as given in the Annexure to this Public Notice. The annexure will form part of Appendix-28A of Handbook of Procedures (Vol.1), 1997-2002.
2. The entry at S. No. 10 in Annexure to Public Notice No. 10/(PN)/1997-2002 dated 21.5.97 shall be corrected to read as Amoxycillin Trihydrate (6 APA Route).
3. The entry at S No. 86 in Annexure to
/1997-2002 dated 21.5.97 shall be corrected to read as 3-Nitro-4-Hydroxy Phenyl Arsonic Acid' instead of 3-Nitro-4-Hydroxy orthonalic Acid'.
4. The entry at S.No. 147 of Annexure to
/1997- 2002 dated 6th June, 1997 shall be deleted.
5. This issues in public interest.
| S.No. | Export Product | Rate of Credit (as a % age of fob value of exports) |
|---|
| 523 | Naphthalene Acetic Acid | 11.00 |
| 524 | Phorate 10% Granule | 12.00 |
| 525 | Phorate Tech (90%) | 12.00 |
| 526 | Phosalone Tech 93% | 12.00 |
| 527 | Phosphamidon Tech (82%) | 12.00 |
| 528 | Sodium Salt of 2,4 Dichloro Phenoxy Acetic Acid 80% (2,4 Di Sodium Salt 80%) | 14.00 |
| 529 | Temephos Tech | 9.00 |
| 530 | Triazophos Technical 70% | 12.00 |
| 531 | Tridemorph Tech | 12.00 |
| 532 | Zinc Phosphide | 13.00 |
| 533 | Zinc Phosphide (Purified grade) | 13.00 |
| 534 | Automobile Tyres and Tubes(in pair) reinforced with Nylon Tyrecord warp-sheet or Rayon Tyrecord wrapsheet and Butyl Rubber. | 17.00 |
| 535 | Automobile Tyres reinforced with Nylon tyre-Cord warp-sheet or Rayon Tyre Cord warp-sheet. | 17.00 |
| 536 | Bicycle tubes | 14.00 |
| 537 | Bicycle Tyres | 14.00 |
| 538 | Butyl tubes, other than cycle tubes | 17.00 |
| 539 | Metal Bonded Rubber Part (Moulded/Extruded) including Engine Mounting and Automotive Part | 12.00 |
| 540 | Nylon bicycle tyres | 14.00 |
| 541 | Pigment Rubber Master Batch URM Blue | 12.00 |
| 542 | Pigment Rubber Master Batch URM Red 4B | 12.00 |
| 543 | Pigment Rubber Master Batch URM Red 5R | 12.00 |
| 544 | Pigment Rubber Master Batch URM Yellow 2G | 12.00 |
| 545 | Precured Tread Rubber/Rubber Strips/Lugs Strips | 12.00 |
| 546 | Rubber Chemical Accelerator(containing 73% Dibenzo thiazoledisulfide & 15% Diphenyl guanidine) | 12.00 |
| 547 | Rubber compounded sheets/Rings | 12.00 |
| 548 | Rubber Condoms | 10.00 |
| 549 | Rubber Condoms packed in Aluminium Foil. | 10.00 |
| 550 | Rubber Hawai Chappal | 15.00 |
| 551 | Rubber Hot water bottle | 10.00 |
| 552 | Rubber Polished brakes | 10.00 |
| 553 | Tubeless all Steel Radial tyres | 17.00 |
| 554 | Vee/Fan Belts Reinforced,with Manmade Textile Cord/Vee Belts with Kevlar | 15.00 |
| 555 | Commercial Plywood | 6.00 |
| 556 | Plywood other than commercial Plywood | 6.00 |
| 557 | Veneer | 2.00 |
| 558 | Ayurvedic Toilet Soap having 67% TFM content and coconut Fatty acid not less than 50% | 15.00 |
| 559 | Beauty Cream | 9.00 |
| 560 | Eau De Perfume containing 70% Alcohol 20% Perfumery compounds or 10% each of aromatic chemicals and essential oils | 13.00 |
| 561 | Herbal Neem Toothpaste | 15.00 |
| 562 | Laundry Soap | 12.00 |
| 563 | Nail Polish in glass bottle in consumer pack | 13.00 |
| 564 | Refined Castor Oil | 2.00 |
| 565 | Refined Glycerine 99.5% | 20.00 |
| 566 | Scouring Powder | 12.00 |
| 567 | Shaving Cream | 15.00 |
| 568 | Synthetic Detergent Powder/Cake | 12.00 |
| 569 | Toilet Soap 80% TFM 1% Perfume | 15.00 |
| 570 | Tooth Paste | 15.00 |
| 571 | 1 stage phenol Resin (Flake) | 14.00 |
| 572 | 50% Rayon Elastic adhesive bandage B.P. | 7.00 |
| 573 | Acrylic fibre /Acrulic fibre Yarn | 15.00 |
| 574 | Agarbattis | 4.00 |
| 575 | Alkyl Phenol Resin Super Beackacite 100 | 9.00 |
| 576 | Calcined Petroleum coke | 14.00 |
| 577 | Carbofoil of various grades(chemically Acid treated graphite) | 17.00 |
| 578 | Carbon Black of all grades | 13.00 |
| 579 | Ink blue concentrate (100% Dye content) Acid blue 93 C.I.No. 42780. | 8.00 |
| 580 | Crown Cork | 12.00 |
| 581 | Fluorescent Powder | 15.00 |
| 582 | Gelatine | 3.00 |
| 583 | Granite Monuments | 3.00 |
| 584 | Granite Tiles | 6.00 |
| 585 | Guargum CP 200 | 12.00 |
| 586 | Heat Reactive Liquid phenol Resin (polyphen TD-2640) | 12.00 |
| 587 | Heat Reactive Liquid phenol Resin (polyphen J-303) | 12.00 |
| 588 | Industrial/Automotive Lubricants | 16.00 |
| 589 | Micro crystalline Cellulose Powder | 2.00 |
| 590 | Neoprene base Adhesives (Solid content 23% plus or minus 1%) | 10.00 |
| 591 | Nylon filament yarn | 15.00 |
| 592 | Nylon filament yarn including crimped twisted and Dyed | 15.00 |
| 593 | Nylon Tyre Yarn/ Cord/Fabric | 15.00 |
| 594 | Ossein | 3.00 |
| 595 | Partially Oriented Yarn (DMT Route) | 15.00 |
| 596 | Partially Oriented Yarn (PTA Route) | 15.00 |
| 597 | Phenolic Resin AL-3 | 9.00 |
| 598 | Plaster of Paris Bandage B.P. or BPC | 9.00 |
| 599 | Polished Granite Slabs | 4.00 |
| 600 | Polyester Filament Yarn | 7.00 |
| 601 | Polyester Staple Fibre (DMT Route) | 14.00 |
| 602 | Polyester Staple Fibre (PSF) | 14.00 |
| 603 | Polyester Staple Fibre (PTA Route) | 14.00 |
| 604 | Polyester Texturised Dyed Filament Yarn | 12.00 |
| 605 | Polyester/Polyester Blended Yarn | 7.00 |
| 606 | Powder Phenol Resin(2 stage powder phenol)(Resin varcum TD-2025) | 14.00 |
| 607 | Prepared Glue (PVA content 15%) | 12.00 |
| 608 | Primary Reformer Catalyst(Type C-11-9-02) | 9.00 |
| 609 | Rayon Tyre Cord | 6.00 |
| 610 | Rayon Tyre Cord/ Fabric dipped | 6.00 |
| 611 | Rayon Tyre Cord/ Fabric or Rayon Tyre Cord Fabric | 6.00 |
| 612 | Rayon Tyre Cord/ Yarn Dipped | 6.00 |
| 613 | Rayon Tyre Yarn | 6.00 |
| 614 | Shoe Polish | 15.00 |
| 615 | Silicon carbide | 4.00 |
| 616 | Sodium Carboxy Methyl Cellulose | 13.00 |
| 617 | Vinyl Acetate Based Adhesive (Solid content 43% -/-1%) | 15.00 |
| 618 | Viscose Staple Fibre | 2.00 |
| 619 | Acid Casein (Industrial Grade ) having Protein content 80-85% | 20.00 |
| 620 | 1-(4-Piperridinyl)-5-Chloro - 2- Benzimidazolinone | 20.00 |
| 621 | 1-(3-Chloropropyl)-Benzimidazoline | 18.00 |
| 622 | 1-(2propenyl)-3-Dihydro-2-H Benzimidazoline-2-One (Minimum 99% Purity) | 18.00 |
| 623 | Basic Blue 3G Nitrate Salt 200% (Assey 65%) (C.I.No.51004) | 8.00 |
| 624 | Rhodamine B | 8.00 |
| 625 | Para Octyl Phenol | 10.00 |
| 626 | Alkali blue (Pigment Blue 6) C.I.No. 42765.1 | 8.00 |
| 627 | Ink blue concentrate(63.32% dye content)Acid blue 93 CI No, 42780 | 8.00 |
| 628 | Basic Blue 3G zinc Salt 330% ( 94% dye content) C.I.No.51004 | 8.00 |
| 629 | Basic Blue 3G zinc Salt 300% ( 85.5% dye content) (C.I.No.51004) | 8.00 |
| 630 | Basic Blue 3G zinc Salt 200% ( 57% dye content) C.I.No.51004 | 8.00 |
| 631 | Potassium cyanide | 9.00 |
| 632 | Acrolite fast carmine P.R.C (Pigment Red 146) 99% Assay | 8.00 |
| 633 | Potassium mercuric Iodide 75% W/W | 10.00 |
| 634 | Jasol blue A.L. Disperse blue 359 (100% dye content) | 8.00 |
| S.No. | Export Product | Rate of Credit (as a % age of fob value of exports) |
|---|
| 151 | Fountain Pen Nibs | 15.00 |
| 152 | Galvanised High Carbon Steel Wire Ropes (wire steel core) | 18.00 |
| 153 | Galvanised High Carbon Steel Wire Ropes (fibre core) | 18.00 |
| 154 | Galvanised Pipes/ tubes with wall thickness above 3mm to 4mm | 16.00 |
| 155 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 1mm or below | 16.00 |
| 156 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 1mm to 2mm | 16.00 |
| 157 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 2mm to 3mm | 16.00 |
| 158 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 3mm to 4mm | 16.00 |
| 159 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 4mm to 5mm | 16.00 |
| 160 | Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 5mm and above | 16.00 |
| 161 | Galvanised Pipes/ tubes with wall thickness 1mm or below | 16.00 |
| 162 | Galvanised Pipes/ tubes with wall thickness above 1mm to 2mm | 16.00 |
| 163 | Galvanised Pipes/ tubes with wall thickness above 2mm to 3mm | 16.00 |
| 164 | Galvanised Pipes/ tubes with wall thickness above 4mm to 5mm | 16.00 |
| 165 | Galvanised Pipes/tubes with wall thickness 5mm and above | 16.00 |
| 166 | Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3" | 15.00 |
| 167 | Gate Clip | 15.00 |
| 168 | Gate Hold Back | 15.00 |
| 169 | Gate Latch | 15.00 |
| 170 | German Silver Art-ware | 7.00 |
| 171 | Gun metal valves | 10.00 |
| 172 | MS colour coated ghamla (made of HR steel) | 12.00 |
| 173 | Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator) | 5.00 |
| 174 | Heavy duty Fork latch | 15.00 |
| 175 | High Carbon Steel Wire Ropes (fibre core) | 18.00 |
| 176 | High Carbon Steel wire Ropes (Steel Wire core) | 18.00 |
| 177 | High Chromium Grinding media balls | 6.00 |
| 178 | Hot Dipped Galvanised Tension Bar/ Gate Rods/Truss Rods/ Drop Rods. | 10.00 |
| 179 | ILD Fork | 16.00 |
| 180 | ILD Guide | 16.00 |
| 181 | Indust Offset Hinge | 16.00 |
| 182 | Indust Offset Bracket | 16.00 |
| 183 | Industrial Locking Device | 16.00 |
| 184 | J-Bracket | 15.00 |
| 185 | Jotter refills | 10.00 |
| 186 | Locks and valves water pipe filling | 6.00 |
| 187 | Loop Cap | 8.00 |
| 188 | LPG Cylinders with valves | 12.00 |
| 189 | Male Bracket | 15.00 |
| 190 | Male Hinge | 15.00 |
| 191 | Male Lag Bracket | 15.00 |
| 192 | Marine freight containers of type ICC 20'x8'x8.5' | 14.00 |
| 193 | Metal fountain Pens | 20.00 |
| 194 | MS Paper pin & Clip | 20.00 |
| 195 | MS Washer | 15.00 |
| 196 | Needle Screws Self colour or Plated | 15.00 |
| 197 | Nickel Plated M S Buckles | 14.00 |
| 198 | Offset Rail End | 16.00 |
| 199 | OTS Cans/ dingeley cans | 15.00 |
| 200 | Oxygen Cylinder dia 140 NF | 13.00 |
| 201 | Oxygen Cylinder dia 229 MM | 13.00 |
| 202 | Panel Clamp | 16.00 |
| 203 | Pen Barrels made of brass or stainless steel | 17.00 |
| 204 | Pen Caps made of brass or stainless steel | 17.00 |
| 205 | Photo frame (Brass) Rectangular | 10.00 |
| 206 | Presensitised Positive Offset Aluminium plates | 13.00 |
| 207 | Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass | 10.00 |
| 208 | Rail End | 16.00 |
| 209 | Rakes/Garden Rakes/ Fork Manure Hooks | 13.00 |
| 210 | Rectangular/ Square Tin Plate container and/ or components thereof | 15.00 |
| 211 | Rectangular/Square Tin Plate container and/or component thereof with round neck. | 15.00 |
| 212 | Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece) | 15.00 |
| 213 | Saddle Clamp made of mild steel | 16.00 |
| 214 | Sanitary and bathroom fittings of brass | 10.00 |
| 215 | Sanitary and bathroom fittings of gun metal | 10.00 |
| 216 | Seamless steel pipes and tubes (other than stainless steel) Hot finished | 11.00 |
| 217 | Self Tapping Screw | 18.00 |
| 218 | Shovels (Spades) with Wooden Handle | 15.00 |
| 219 | Single folding bed made of mild steel | 10.00 |
| 220 | Sleeve made of steel | 16.00 |
| 221 | Sleeve Bracket | 16.00 |
| 222 | Spade/Showels | 15.00 |
| 223 | Stainless Steel safety razor Blades | 10.00 |
| 224 | Stainless Steel Vacuum Flask | 11.00 |
| 225 | Stainless steel wire rope (from wire rod) | 12.00 |
| 226 | Stapler | 6.00 |
| 227 | Steel Clamp (galvanised) | 6.00 |
| 228 | Steel Clamp (ungalvanised) | 16.00 |
| 229 | Steel pegs | 14.00 |
| 230 | Steel Screw | 18.00 |
| 231 | Steel Weld mesh | 20.00 |
| 232 | Stranded wire made of mild steel | 18.00 |
| 233 | Surgical blades other than made of High Carbon Steel | 8.00 |
| 234 | Surgical Blades made of High Carbon Steel (Carbon 0.6% and above by weight) | 6.00 |
| 235 | Table Pencil Sharpener | 15.00 |
| 236 | Tension Band made of steel | 15.00 |
| 237 | Tiller Left Hand or Right Hand | 15.00 |
| 238 | Tips made of brass for Ball Pen Refills | 15.00 |
| 239 | Top and Bottom cover of Round Battery Jacketmade from Tin plate | 13.00 |
| 240 | Tower Crane | 13.00 |
| 241 | Track Wheel made of mild steel | 16.00 |
| 242 | Twin type shaving system Disposable Razor Blades/razor box/razor card/ magazine. | 9.00 |
| 243 | Twin type shaving system Razor/ Razor Handle | 9.00 |
| 244 | U-Bolt | 13.00 |
| 245 | U-Clamp | 13.00 |
| 246 | Universal Bracket | 13.00 |
| 247 | Valve for LPG Cylinder,Hand wheel type, made of Brass | 8.00 |
| 248 | Water meters of outer casing made of brass. | 8.00 |
| 249 | Wire Nails | 15.00 |
| 250 | Wood screws, self colour or plated | 15.00 |
| 251 | Zinc plated (Galvanised) conduit Hanger | 11.00 |
| 252 | Ball / Roller / Thrust / Clutch Release/ Spherical Plain Bearing | 12.00 |
| 253 | Bench Grinder 6" | 4.00 |
| 254 | Brazed Carbide Tools | 11.00 |
| 255 | Brazed Tools Carbide Tips | 11.00 |
| 256 | CP 1240 Pneumatic tool | 8.00 |
| 257 | Cutting Tools of High speed Steel (Cobalt Grade) | 8.00 |
| 258 | Cutting tools of High Speed Steel (Non-Cobalt Grade) | 8.00 |
| 259 | Drilling Machine Accessories (viz) Drill Rods/Casings/core barrels/ core lifters/ coupling adapters/core litter case/ substitutes etc. made out of carbon steel seamless tubes | 20.00 |
| 260 | Drills/Reamers End Mills/Broaches Milling cutters including Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade). | 12.00 |
| 261 | Drills/Reamers End Mills/Breaches/Milling cutters includings Threading Tools/ Taps of High speed (Cobalt Grade) | 12.00 |
| 262 | Pneumatic Rivetting Hammer | 7.00 |
| 263 | Resin bonded diamond wheels | 6.00 |
| 264 | Saws/ Segments made from high speed steel strips/ sheets | 8.00 |
| 265 | Screw Drivers made of non alloy steel including Nickel plated | 11.00 |
| 266 | Front Engined Three Wheeler Drive away Chassis in CKD / SKD / CBU Condition | 14.00 |
| 267 | Rear / front Engine Auto Rikshaw in CKD/SKD/CBU condition | 14.00 |
| 268 | Scooter | 14.00 |
| 269 | Motor Cycle | 14.00 |
| 270 | Moped | 14.00 |
| 271 | Alternator Assembly | 14.00 |
| 272 | Anchor Pin | 13.00 |
| 273 | Armature for Delcoremy type motor | 15.00 |
| 274 | Armature for Dynamo | 15.00 |
| 275 | Starter Motor Armature for Low Speed Vehicles | 11.00 |
| 276 | Automobile Tyre-Tube Valves | 18.00 |
| 277 | Automotive timing chain | 8.00 |
| 278 | BB Axle | 13.00 |
| 279 | Brake shoe plate | 15.00 |
| 280 | Cam | 10.00 |
| 281 | Cam Shaft | 10.00 |
| 282 | CBH plate for starter meter | 12.00 |
| 283 | Commutator | 14.00 |
| 284 | Cone Sleeve/Axle Stud sleeve | 20.00 |
| 285 | Connecting Rod Forging | 12.00 |
| 286 | Connecting Rods | 12.00 |
| 287 | Cotter pin made of steel of any quality | 13.00 |
| 288 | Crank for chain wheel | 13.00 |
| 289 | Crank Shaft (for four wheelers) | 12.00 |
| 290 | Crank Shaft (for two wheelers) | 10.00 |
| 291 | Crank-shaft Forgings/connecting rod forgings | 12.00 |
| 292 | Deep Well Hand pump complete without connecting Rods with/ without spares & Tools | 15.00 |
| 293 | Deepwell hand pump with 10 connecting rods. | 15.00 |
| 294 | Draw bars | 11.00 |
| 295 | Drive assembly for starter motor | 15.00 |
| 296 | End-Cap Assembly | 12.00 |
| 297 | Field Coil for Starter Motor | 15.00 |
| 298 | Flex Plate Assembly | 10.00 |
| 299 | Flywheel Starter Ring Gear | 10.00 |
| 300 | Front Axle beam/I-Beam | 13.00 |
| 301 | Front/rear axle shaft | 13.00 |
| 302 | Full Tension Sleeve | 8.00 |
| 303 | Galvanised Spokes | 18.00 |
| 304 | Generator (Dynamo) Assembly | 14.00 |
| 305 | Half Collets for engine valves | 11.00 |
| 306 | Handpump with minimum 5 connecting /pump rods | 15.00 |
| 307 | Helical Coil Spring | 15.00 |
| 308 | Hub Bolts for Automobiles | 12.00 |
| 309 | Hub cone | 12.00 |
| 310 | Ignition Coil oil filled | 18.00 |
| 311 | Ignition Coil Resin Cost | 16.00 |
| 312 | Inlet exhaust valves | 15.00 |
| 313 | Integral Shaft Water Pump bearing for automotive applications | 16.00 |
| 314 | King pin made out of steel | 12.00 |
| 315 | Laminated Leaf Springs of steel quality | 12.00 |
| 316 | Light Commercial Vehicle (LCV) of GVW 7500 Tonnes | 12.00 |
| 317 | Machined trailor ball/hitch pin/linkage pin | 11.00 |
| 318 | Nozzles made of steel | 8.00 |
| 319 | Oil Bath Gear case | 12.00 |
| 320 | Piston Pin/ Gudgeon Pin | 10.00 |
| 321 | Push rod | 12.00 |
| 322 | Rear Axle Assembly for LCV/HCV (Assembly/SKD) | 12.00 |
| 323 | Rocker Arm/ Rocker Shaft made of steel | 10.00 |
| 324 | Roller for auto break shoe | 13.00 |
| 325 | Shallow Well hand pump with PVC riser main pump rod,well screen, Lower casing & upper casing. | 13.00 |
| 326 | Sleeve Shaft and/or Ball Joint | 8.00 |
| 327 | Slip Ring | 10.00 |
| 328 | Slip Stub Shaft | 8.00 |
| 329 | Solenoid Switch Pre-engaged type | 13.00 |
| 330 | Solenoid Swtich Co-axial type | 13.00 |
| 331 | Spindles made of steel | 11.00 |
| 332 | Sprocket with central axle | 10.00 |
| 333 | Starter motor with maximum current upto 1100 Amps | 11.00 |
| 334 | Stator for alternator for Light Duty (12 Volts 60-95 Amps) | 14.00 |
| 335 | Submersible Water pump sets i.e. Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes | 16.00 |
| 336 | Valve Tappets | 13.00 |
| 337 | Voltage Regulator | 7.00 |
| 338 | Aluminium Ingots | 5.00 |
| 339 | Aluminium Sow Ingots | 5.00 |
| 340 | Aluminium Wire Bar/ Rod | 5.00 |
| 341 | Brass Washers of all types | 10.00 |
| 342 | Brass Wood Screw | 12.00 |
| 343 | Calcined Alumina | 11.00 |
| 344 | Copper flats/ Sheets/ Strips | 12.00 |
| 345 | Copper Foils | 12.00 |
| 346 | Extruded Aluminium Products including pipes and tubes | 10.00 |
| 347 | Lead Antimony Wire | 15.00 |
| 348 | Pen Part - Mouth piece made of Brass | 18.00 |
| 349 | Phosphor Bronze fabric | 15.00 |
| 350 | Pressure die casting(zinc) | 17.00 |
| 351 | Tin Ingots | 2.00 |
| 352 | Valve Stems made of brass | 8.00 |
| 353 | Cast Alloy permanent magnets | 8.00 |
| 354 | Hard ferrite magnets in magnetized or demagnetized condition | 12.00 |
| 355 | Magnetic assemblies incorporating cast alloy permanent magnets viz.pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/door catches/ vee blocks bases/ hold rast | 9.00 |
| 356 | Spikes for use as Railway Track material | 13.00 |
| 357 | Gear cutting tools of cobalt bearing high speed steel | 8.00 |
| 358 | Industrial diamond prod. Diamond grinding wheels/diamond file and tools | 6.00 |
| 359 | Aluminium pistons, in fully machined conditions | 9.00 |