SL.No. |
Description of Goods |
Condition |
(1) |
(2) |
(3) |
1. |
Medals and decorations (including medal ribbons) |
If imported directly by the Government of India in the Ministry of Defence. |
2. |
Personal effects of the persons on duty out of India with the Indian naval, military or air forces or with the Indian Navy |
If Imported for delivery to the next of kin of such person if he dies or is wounded, is missing or is taken prisoner of war. |
3. |
* |
* |
4. |
Bonafide gifts from donors abroad when imported for the maintenance of war graves by an institution |
If, (a) a certificate is produced from the Ministry of Defence that the said goods are intended solely for the purpose of maintenance of war graves; and
(b) the head of the importing institution certifies in each case that the said goods are intended only for the above purpose and shall not be sold or disposed off. |
5. |
Supplies made out of warehoused goods belonging to Air-India International |
if,-
(a) the supplies are made to the two specific 737 aircrafts maintained and operated by the Indian Air Force for use of Government of India for the purpose of certain special assignments; and
(b) an officer not below the rank of an Air Vice-Marshal certifies in each case that the said supplies are required for the purpose specified above. |
6. |
Imported stores purchased out of bonded stocks lying in a warehouse |
If,- (a) the imported stores are intended to be supplied free by the Government for use of the crew of a ship of the Coast Guard Organisation, in accordance with their conditions of service;
(b) a shipping bill in the prescribed form has been presented and the export duties, penalties, rent, interest and other charges payable, in respect of the imported stores have been paid;
(c) an order for clearance of the imported stores for taking on board a ship of the Coast Guard Organisation has been made by the proper officer; and
(d) the procedure as may be specified by the Commissioner of Customs in this behalf is followed. |
7. |
Paints, consumables (adhesives, glues, resins, additives, sealants, pigments, etc.), metallic( ferrous and non ferrous) and non-metallic (composite reinforced fiber, wood, carbon fiber, glass fiber, Rubber, etc.) materials in any form and articles thereof, conforming to aeronautical specification accompanied with certificate of conformance/ release note /airworthiness certificate for development
(Amended vide CUS NTF NO. 28/2003 DATE 01/03/2003)
|
If,- (a) the said goods conform to aircraft and aerospace specifications;
(b) the said goods are imported for use in the manufacture of aircrafts including helicopters and such manufacture is against an indent from the Ministry of Defence and the aircrafts including helicopters so manufactured are appropriated by the Ministry of Defence;
(c) the importer undertakes to store the said goods separately and account for the same to the satisfaction of the Assistant Commissioner of Customs or Deputy Commissioner of Customs;
(d) the importer, by execution of a bond in such form and for such sum as may be specified by that Assistant Commissioner, binds himself to pay on demand in respect of such quantity of the said goods, as is not proved to the satisfaction of the said Assistant Commissioner to have been used in the aforesaid manner, an amount equal to the duty leviable but for the exemption contained herein. |
8. |
Goods imported for trial, demonstration or training before any authority under the Ministry of Defence in the Government of India |
If,- (a) a certificate from the Under Secretary to the Government of India in the Ministry of Defence is produced to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, in each case, that the goods imported are for the purpose of trial, demonstration or training; and
(b) the importer undertakes, in each case, to pay the duty leviable on such goods (except those which are certified by the said Under Secretary as having been consumed in the process of trial, demonstration or training) which are not re-exported by him within a period of two years from the date of importation or within such extended period importation or within such extended period that the said Assistant Commissioner may allow.
(Bold words has been substituted vide CUS NTF NO. 28/2003 DATE 01/03/2003)
|
|
(Sr.Nos. 9, 9A, 10, 10A has been omitted vide CUS NTF NO. 14/2016 DATE 01/03/2016) |
|
[old-9. |
The following goods required for construction of, or fitment to, ships of Indian Navy of Coast Guard:-
(i) machinery equipment, components and raw materials;
(ii) spares and test equipment for maintenance, testing and tuning of imported equipment;
(iii) parts required for manufacture of indigenous equipment by Indian suppliers for supply to Indian Navy Coast Guard. |
If imported by the Government of India
[old - or by a person authorised by that Government or shipped on the order of a Department of that Government and appropriated to such order at the time of shipment]
|
9A. |
The following goods required for construction of, or fitment to, ships of Indian Navy or Coast Guard:-
(i) machinery, equipment, components and raw materials;
(ii) spares and test equipment for maintenance, testing and tuning of imported equipment;
(iii) parts required for manufacture of indigenous equipment by Indian suppliers for supply to Indian Navy or Coast Guard. |
If imported by a person authorised by the Government of India, or shipped on the order of a Department of that Government and appropriated to such order at the time of shipment."; |
10. |
(i) Aircrafts, aircraft parts, aircraft engines and aircraft engine parts;
(ii) Production tooling including jigs, tools, fixtures, tools and gauges, ground support equipments, test / measuring equipments, scientific and technical instruments, apparatus and equipments including spare parts and components thereof, consumables
(Amended vide CUS NTF NO. 28/2003 DATE 01/03/2003)
(iii) Arms, ammunition and military stores;
(iv) Tools and gauges which are for use only with ammunition and explosives of service use; ammunition chemicals; electric detonators; fire directing and fire control instruments such as range-finders, predictors, platters, computers; sight dial; signal equipment including wireless equipment and component parts thereof, used exclusively by the defence services; test equipment for radars for service use; military bridging stores and equipment; ASDIC and ECHO sounding equipment; specialised cameras for Air Force use; mines sweeping gear and parachutes;
(v) Radars, torpedoes, sonar sets, mine laying gear, diving equipment and their spares, accessories, jigs, tools testing equipment and components;
(vi) Spare parts, accessories, jigs, tools, testing equipment, components, special raw materials and half wroughts like steel forgings and castings, to be processed into finished components for armourd and specialised vehicles peculiar to the defence services;
(vii) Guided weapons and their Accessories;
(viii) Components, spares, jigs, fixtures, tools, dies, moulds and test equipment required for the manufacture and testing of guided weapons and their accessories;
(ix) Raw material and special materials required for the manufacture of guided weapons and their accessories;
(x) Rock drills and breakers;
(xi) All types of ground support equipment for guided weapons and their accessories; |
If the said goods are imported by the Government of India or State Governments.
[old If,- (a) the said goods are imported by the Government of India, the contractors of the Government of India, State Governments, Public sector Undertaking of the Central Government or the State sub-contractors of such Public Sector Undertakings; and
(b) in the case of imports by contractors or sub-contractors or Public Sector Undertakings referred above, the importer furnishes at the time of import a duty exemption certificate showing:-
(1) the details of the purchase order placed by the Ministry of Defence on the contractors or sub-contractors and on the said Public Sector Undertakings and the quantity of the items required to be imported to execute the said order; and (2) the details of purchase order placed by the said contractors or sub-contractors or the said Public Sector Undertakings, on their foreign suppliers indicating the description and quantity of the items.
Explanation,-
(i) in the case of imports by contractors of the Government of India, who are contractors of Research and Development Laboratories or Establishment under the Ministry of Defence the certificate shall be signed by the Chief Controller of Research and Development (R) of the said Laboratories or Establishment
(ii) in the case of imports by Public Sector Undertakings of the Central Government under the Ministry of Defence, the certificate shall be signed by the functional Director of such Undetaking; and
(iii) in other cases where a certificate is to be furnished by the importer at the time of import in terms of condition (b) above, the certificate shall be signed by an officer not below the rank of a Joint Secretary to the Government of India, in the Ministry of Defence.
(Pl. refer Cir. No. 57/2002-Cus., Dt. 10/09/2002 for Full exemption from customs duty to goods imported for the Computerized Inventory Control Project of the Ministry of Defence)
|
10A. |
(i) Aircrafts, aircrafts parts, aircraft engines and aircraft engine parts;
(ii) Production tooling including jigs, tools, fixtures, tools and gauges, ground support equipments, test/measuring equipments, scientific and technical instruments, apparatus and equipments including spare parts and components thereof, consumables;
(iii) Arms, ammunition and military stores;
(iv) Tools and gauges which are for use only with ammunition and explosives of service use; ammunition chemicals; electric detonators; fire directing and fire control instruments such as range finders, predictors, platters, computers; sight dial; signal equipment including wireless equipment and component parts thereof, used exclusively by the defence services; test equipment for radars for service use; military bridging stores and equipment; ASDIC and ECHO sounding equipment; specialised cameras for Air Force use; mines sweeping gear and parachutes;
(v) Radars, torpedoes, sonar sets, mine laying gear, diving equipment and their spares, accessories, jigs, tools, testing equipment and components;
(vi) Spare parts, accessories, jigs, tools, testing equipment, components, special raw materials and half wroughts like steel forgings and castings, to be processed into finished components for armoured and specialised vehicles peculiar to the defence services;
(vii)Guided weapons and their accessories:
(viii) Components, spares, jigs, fixtures, tools, dies, moulds and test equipment required for the manufacture and testing of guided weapons and their accessories;
(ix) Raw material and special materials required for the manufacture of guided weapons and their accessories;
(x) Rock drills and breakers;
(xi) All types of ground support equipment for guided weapons and their accessories. |
If,-
(a) the said goods are imported by the contractors of the Government of India, Public Sector Undertakings of the Central Government or the State Governments and the sub-contractors of such Public Sector Undertakings; and
(b) in the case of imports by contractors or sub-contractors or Public Sector Undertakings referred above, the importer furnishes at the time of import a duty exemption certificate showing :-
(1) the details of the purchase order placed by the Ministry of Defence or Ministry of Home Affairs, as the case may be on the contractors or sub-contractors and on the said Public Sector Undertakings and the quantity of the items required to be imported to execute the said order; and
(2) the details of the purchase order placed by the said contractors or sub-contractors or the said Public Sector Undertakings, on their foreign suppliers indicating the description and quantity of the items .
Explanation.-
(i) in the case of imports by contractors of the Government of India, who are contractors of Research and Development Laboratories or Establishments under the Ministry of Defence, the certificate shall be signed by the Chief Controller of Research and Development (R) of the said Laboratories or Establishments;
(ii) in the case of imports by Public Sector Undertakings of the Central Government under the Ministry of Defence, the certificate shall be signed by the
functional Director or the Chief Executive Officer, as the case may be,
[old -functional Director] of such Undertaking; and
(iii) in other cases where a certificate is to be furnished by the importer at the time of import in terms of condition (b) above, the certificate shall be signed by an officer not below the rank of a Joint Secretary to the Government of India, in the Ministry of Defence or Ministry of Home Affairs, as the case may be.".]
|
11. |
(i) Machines, appliances, instruments, parts and equipmentrequired for the construction of, or fitment to, or maintenance of, patrol crafts;
(ii) Wireless transmission and receiving sets and their components;
(iii) Night vision equipment and their compnents;
(iv) Arms and their components, and ammunition;
(v) Omitted
(vi) Radio communication test sets;
(vii) Spare parts of patrol crafts;
(viii) Spare parts in respect of any of the above items. |
If,- (a) the goods are imported by the Government of of India or by a person authorised by that Government or shipped on the order of a Department of that Government for use in anti-smuggling operations and are appropriated under such order at the time of shipment; and
(b) the importer produces a certificate from the Under Secretary to the Government of India in the Department of Revenue to the effect that the said goods are intended use in anti-smuggling operations. |
12. |
(i) Spedeheat grenades CS, 3-way grenades CN / CS, practice grenades, blast dispersion grenades with two second bouchon, model 34 signle blast grenades, one second delay firing mechanism for spede-heat grenades, two seconds delay firing mechanism for three way grenades;
(ii) Long range shells CN/CS, short range CN/CS, flite rite-shells CN/CS, practice shells CN/CS;
(iii) Refills, accessories, caps, gas pellets and recapping and decapping machines for practice shells, gas guns and accessories and spare parts for gas guns;(iv) Truncheons, truncheon cartridges, one second bouchons, two second bouchons, chemical mace, aerosol tear gas spray, tear gas billets, paper fog and bullet proof protective vests. |
If,- (a) the said goods are imported for the use of Police Force of the States or the Union territories, or the Central Reserve Police Force; and
(b) the importer produces a certificate from Under Secretary to the Government of India in the Ministry of Home Affairs to the effect that the said goods are intended for the aforesaid use; |
13. |
Machinery, equipment, instruments, fittings, devices, scientific apparatus, components, spares, tools, accessories, computer hardware, computer software, technical know-how (in the form of documents and drawings in the printed media), castings, forgings, pipings, tubings, raw materials and consumables required for the purpose of ATVP, Ministry of Defence. |
If,-
(a) the said goods are imported by works centres of the ATVP, Government agencies or public sector undertakings, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description, duly certified by a Project Director or Director of the ATV Programme (of the rank of Rear Admiral of the Indian Navy, or of equivalent rank of the Joint Secretary to the Government of India), to the effect that the said goods are required for the ATVP, shall be used only for the ATVP and that they are not manufactured in India.
[old-Explanation. - Nothing contained in this exemption shall have effect on or after the 1st day of January 2016 [OLD2011]."] |
(Explanation omitted vide CUS NTF NO. 56/2015 DATE 11/12/2015)
(In Sl No. 13 has been amended vide Ntf. CUS NTF NO. 12/2011 DATE 24/02/2011)
(In Sl No. 13 bold words has been amended vide Ntf. CUS NTF NO. 105/2005 DATE 28/12/2005)
(This Sl No.has been amended vide Ntf. No.33/2001 dated 29/03/2001)
|
14. |
Machinery, equipment, instruments, components, jigs, fixtures, dies, tools, raw materials, accessories and spares required for the purposes of Integrated Guided Missile Development Programme (IGMDP) of the Ministry of Defence. |
If,-
(a) the said goods are imported by authorised works centres of the IGMDP, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised work centre produces to the Joint Commissioner of Customs or the Assistant Commissioner of Customs,or Deputy Commissioner of Customs,as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Member Secretary, Programme Management Board of the IGMDP, Defence Research and Development Laboratory, Hyderabad to the effect that the said goods mentioned in the list are required for the purposes of the IGMDP, and that they are not mnufactured in India and that the imports of the said goods mentioned in the said list are authorised by the Ministry of Defence under and for the purposes of the IGMDP and shall be used only for the purposes of the IGMDR
Explanation.- Nothing contained in this exemption shall have effect on or after the 1st day of January 2011. [OLDthe 31st day of December, 2009]. |
|
(Sl No. 14 has been amended vide Ntf. CUS NTF NO. 51/2010 DATE 16/04/2010)
(Sl No. 14 has been amended vide Ntf. CUS NTF NO. 23/2009 DATE 03/03/2009)
(Sl No. 14 has been amended vide Ntf. CUS NTF NO. 14/2008 DATE 04/02/2008)
(Sl No. 14 has been amended vide Ntf. CUS NTF NO. 105/2005 DATE 28/12/2005)
(Amended as per Custom Notification No.130/2001 dated 24/12/2001)
(Amended as per Custom Notification No.11/2000 dated 31st January, 2000) |
15. |
Machinery, instruments, tools, including accessories of such machinery, instruments and tools required for the setting up of ammunition filling facilities in the Ordance Factory, Badmal, Distt.: Bolangir in Orissa, of the Ministry of Defence. |
If, –
(a) the said goods are imported by the General Manager, Ordance Factory, Badmal, Distt. : Bolangir in Orissa; and
(b) the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by an officer not below the rank of a Joint Director in the Ordnance Factory Board, Kolkata, to the effect that the said goods mentioned in the list are required for the setting up of ammunition filling facilities in the Ordnance Factory, Badmal, Distt.: Bolangir in Orissa, and that such goods are not manufactured in India and shall be used only for the above purpose in the said factory.
Explanation. –Nothing contained in this exemption shall have effect on or after the 31st day of August, 2003. |
(S.No.15 has been amended as per Cus. Ntf. No.03/2003 dated 03/01/2003)
|
[OLD - 15. |
Machinery, instruments, tools including accessories of such mahcinery, instruments and for the tools required setting up of ammunition filling facilities in the Ordnace Factory, Badmal,Distt.:Bolangir in Orissa, of the MInistry of Defence. |
If,-
(a) the said goods are imported by the General Manager ,Ordanace Factory, Badmal,Distt.:Bolangir in orissa; and
(b) the importer produces to the Assistant Commissioner of Customs or Deputy Commissioner of Customs,at the time of import, in each case, a list of the said goods with their relevant description duly certified by an officer not below the rank of a Joint Director in the Ordnance Factory Board, Calcutta, to the effect that the said goods mentioned in the list are required for the setting up of ammunition filling facilities in the Ordnance Factory, Badmal, Distt.:Bolangir, and that such goods are not manufactured in India and that the said goods shall be used only for the purposes in the said factory.
Explanation,- Nothing contained in this exemption shall have effect on or after the 1st day of August, 2002. |
( S.No.15 has been amended as per Custom Notification No.81/2001 dated 20-7-2001)
(S. No. 15 has been amended as per Custom Notification No.103/2000 dated 19-7-2000) ] |
16. |
Ballistic grade aramid fabric, aramid thread, aramid yarns, [OLDaramid thread], ballistic grade ceramic plate, high performance polyethylene plate special grade polyurethane paste and special grade thermoplastic film required for the manufacture of bullet proof jackets and bullet proof helmets [OLDbullet proof jackets] for supply to the armed forces of the Union under the Ministry of Defence or the Police Foreces of the States or the Union Territories |
If,-
(a) the importer funishes to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, at the time of importation, in each case, a list of the said goods, with relevant description and quantities required for the manufacture of such bullet proof jackets; and
(b) such list is duly certified by an officer not below the rank of a Joint Secretary to the Government of India:-
(1) in the Ministry of Defence, in the case of imports made against an order for supply of such bullet proof jackets to the Armed Forces of the Union under the Ministry of Defence; or
(2) in the Ministry of Home Affairs, in case import is made against an order for supply of such bullet proof jackets to the Police Forces of the States or the Union Territories.
Explanation:- Police Forces of the States or the Union Territories shall also include the Central Reserve Police Force, the Indo-Tibetan Border Police Force, the Special Services Bureau, the Border Security Force, the Central Industrial Security Force and the National Security Guards maintained or constituted under the Central Reserve Police Force Act, 1949 ( 66 of 1949), the Indo-Tibetan Border Police Force Act, 1992 (35 of 1992), the Border Security Force Act, 1968 (47 of 1968), the Central Industrial Security Force Act, 1968(50 of 1968) and the National Security Guard Act, 1986 (47 of 1986) |
[Sl.no.16 amended vide CUS NTF NO. 34/2007 DATE 01/03/2007]
[Sl.no.16 amended vide Customs Notification No. 111/99 dtd. 21.9.99]
[Sr.No.16 has been substituted vide CUS NTF NO. 11/2012 DATE 17/03/2012]
|
17. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies tools, accessories, computer software, raw materials and consumables required for the purpose of SAMYUKTA Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by works centers of the SAMYUKTA Programme, Government agencies or public sector undertakings, as the case may be, designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description, -
(1) duly certified by the Programme Director or Associate Programe Director, SAMYUKTA Programme, Department of Defence Research and Development, to the effect that the said goods are required for the SAMYUKTA Programme, shall be used only for the SAMYUKTA Programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the import of the said goods mentioned in the said list are authorised by the Ministry of Defence under and for the purposes of the SAMYUKTA Programme.
Explanation. – Nothing contained in the exemption shall have effect on or after the 1st day of June, 2006. |
[Sl.no.17 has been amended vide Customs Notification CUS NTF NO. 05/2006 DATE 24/01/2006]
[Sl.no.17 has been amended vide Customs Notification CUS NTF NO. 49/2004 DATE 23/03/2004]
[Sl.no.17 has been amended vide Customs Notification CUS NTF NO. 93/2003 DATE 12/06/2003] |
[OLD 17. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of SAMYUKTA Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by works centers of the SAMYUKTA Programme, Government agencies or public sector undertakings, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description, -
(1) duly certified by the Programme Director or Associate Programme Director, SAMYUKTA programme, Department of Defence Research and Development, to the effect that the said goods are required for the SAMYUKTA Programme, shall be used only for the SAMYUKTA programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the imports of the said goods mentioned in the said list are authorized by the Ministry of Defence under and for the purposes of the SAMYUKTA Programme.
Explanation.– Nothing contained in this exemption shall have effect on or after the 1st day of April, 2003.] |
[Sl.no.17 has been amended vide Customs Notification No.133/2002 dt.3.12.2002] |
[OLD 17. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of SAMYUKTA Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by works centers of the SAMYUKTA Programme, Government agencies or public sector undertakings, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence, and
(b) such importers produce to the Joint Commissioner of Customs Assistant, Commissioner of Customs or Deputy Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description,-
(1) duly certified by the Programme Director or Associate Programme Director SAMYUKTA programme, Department of Defence Research and Development, to the effect that the said goods are required for the SAMYUKTA Programme, shall be used only for the SAMYUKTA programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the imports of the said goods mentioned in the said list are authorized by the Ministry of Defence under and for the purposes of the SAMYUKTA Programme.
Explanation.- Nothing contained in this exemption shall have effect on or after the 1st day of December, 2002.] |
[Sl.no.17 amended vide Customs Notification No. 8/2000 dt. 27.01.2000] |
18. |
Machinery, equipment, instruments components spares, tools, accessories, computer software, mock ups and models, raw materials and consumables required for the purposes of Light Combat Aircraft Programme (LCAP) of the Ministry of Defence. |
If,- (a) the said goods are imported by authorised works centres of the LCAP, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India, in the Ministry of Defence; and
(b) such importers produce to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, at the time of import, in each case, a list of the said goods with their relavant description,-
(1) duly certified by the Senior Manager or the Assistant Director [OLD duly certified by the Senior Manager], Aeronautical Development Agency, to the effect that the goods mentioned in the said list are required for the LCAP of the Ministry of Defence, shall be used only for the LCAP and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the imports of the goods mentioned in the said list are authorised by the Ministry of Defence under and for the purposes of the LCAP.
Explanation,- Nothing contained in this exemption shall have effect on or after the 1st day of January, 2019 [OLD-the 28th day of March, 2010 [OLD- the 1st day of July, 2006. [OLD - 1st day of July, 2002.]] |
(Sl. No. 18 has been substituted vide CUS NTF NO. 32/2010 DATE 11/03/2010)
(In Sl. No. 18 in column (3) in explanation Words "the 28th day of March, 2010" has been substituted vide NTF. NO. 64/2006-Cus., Dt. 26/06/2006)
(In Sl. No. 18 in column (3) in explanation Bold Words before OLD has been substituted vide Ntf. No. 66/2002-Cus., Dt. 26/06/2002)
|
19. |
Machinery, equipment, instruments components spares, raw materials consumables, jigs, fixtures tools, accessories and computer software required for the purpose of the SANGRAHA Programme of the Ministry of Defence |
If,- (a) the said goods are imported by authorised works centres of the SANGRAHA Programme, as may be designated, by an officer not below the rank of a Deputy Secretary to the Government of India, in the Ministry of Defence; and
(b) such importer produces to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, at the time of import, in each case, a list of the said goods with their relevant description,- (1) duly certified by the Programme Director or Associate Programme Director , Department of Defence Research and Development, to the effect that the goods mentioned in the said list are required for the SANGRAHA Programme of the Ministry of Defence, shall be used only for the SANGRAHA Programme and that they are not manufactured in India; and (2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the imports of the goods mentioned in the said list are authorised by the Ministry of Defence under and for the purpose of the SANGRAHA Programme.
Explanation,- Nothing contained in this exemption shall have effect on or after the 1st day of July, 2002. |
20. |
Bomb disposal suits/helmets /protection shields. Bomb suppression blanket. Explosive detectors including hand held or portable type. Electronic stethoscope. Remote car opening tool (push/pull type). [OMITTED- Portable X-ray machine/system], Inspection/ Search mirrors - illuminated/ telescopic or otherwise. Mine detectors, Metal detectors (portable or fixed), Postal bomb detector. Explosive container. Water jet disrupter with cartridges and laser sight and Telescopic manipulator, Non-linear junction detector. Optical fibre scopes, Search lights (dragon variety), Radiation detectors. Parcel viewer. Alarm systems, CCTV systems. Bomb disrupter, Bomb trailer, Blasting machines. Wire and cable locators
|
If,- (a) imported by the Police Forces of the States or Union territories or Central Reserve Police Force, National Security Guard or Border Security Force or Central Industrial Border Police or Assam Rifles or Railway Protection Force or Special Frontier Force for bomb detection or disposal purposes;and
(In S.No.20, in column (3), in sub-condition (a), the words “ Special Protection Group or ” be omitted vide Cus Ntf No.99/2002 Date 13/09/2002)
(b) the importer produces a certificate from an officer in the Ministry of Home Affairs or Ministry of Railways, as the case may be,not below the rank of an under Secretary to the Government of India to the effect that the Said goods are intended for the aforesaid use. |
(Sr. No. 20 in column (3) (a) & (b)has been amended vide Customs Notification No.146/2000, dt. 15-12-2000) |
21. |
The following goods,-
(a) capital equipment required for setting up of facilities for manufacture of SU-30 MKI aircraft; and
(b) capital equipment required for setting up facilities for-
(i) repair/overhaul of SU-30 MKI aircraft, its Avionics & accessories; and
(ii) overhaul of AL-31FP engines and its accessories |
If imported by M/S Hindustan Aeronautics Limited (HAL). |
(Sr. No. 21 has been substituted vide Customs CUS NTF NO. 12/2008 DATE 23/01/2008) |
[OLD 21. |
Capital equipment required for setting up of facilities for manufacture of SU-30 MKI aircraft |
If imported by M/S Hindustan Aeronautics Limited (H.A.L.) .] |
(Sr. No. 21 has been added vide Customs Notification No.66/2002, dt. 26/06/2002) |
22. |
All goods |
If,-
(a) imported for the use of Special Protection Group for operational purpose; and
(b) the importer produces a certificate from an officer in the Cabinet Secretariat not below the rank of an Under Secretary to the Government of India to the effect that the said goods are intended for the aforesaid purpose.
[OLDIf,-
(a) imported by the Special Protection Group for operational purposes; and
(b) the importer produces a certificate from an officer in the Ministry of Home Affairs not below the rank of an Under Secretary to the Government of India to the effect that the said goods are intended for the aforesaid purposes.] |
(Sr. No. 22 has been substituted vide Customs CUS NTF NO. 124/2008 DATE 21/11/2008)
(Sr. No. 22 has been added vide Customs Notification No.99/2002, dt. 13/09/2002) |
23. |
Capital equipment required for setting up of facilities for manufacture of compressor / turbine blades for AN-32 transport aircraft , Mi-8 and Mi-17 helicopter. |
If imported by M/S Hindustan Aeronautics Limited (H.A.L.) |
(Sr. No. 23 has been inserted vide Customs Ntf. No.06/2003, Dt. 06/01/2003) |
24 |
ToT documents (both Technical Data Pack and manufacturing Data Pack), machinery, instruments, tools, accessories and spares including replacement of defective parts, if any, under the warranty clause, required for manufacturing facilities for Bi-Modular Charge System for high caliber ammunition in the Ordnance Factory Project Nalanda, at Rajgir in Nalanda District of Bihar, of the Ministry of Defence |
If, –
(a) the said goods are imported into India by the Ordnance Factory Board, Kolkata;
(b) the importer produces to the Deputy Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods duly certified by General Manager, Ordnance Factory Project, Nalanda at Rajgir or by an officer not below the rank of Joint Director in the Ordnance Factory Board, Kolkata that the said goods are required for manufacturing facilities for Bi-Modular Charge System for high caliber ammunition at Ordnance Factory Project, Nalanda; and
(c) the said goods are not manufactured in India and the said goods shall be used only for the purpose of the said Project.
Explanation: – Nothing contained in this exemption shall have effect on or after the 30th day of November, 2005. |
(Sr. No. 24 has been inserted vide Customs Ntf. No.88/2003, Dt. 29/05/2003) |
25. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of DIVYA DRISHTI Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by works centers of the DIVYA DRISHTI Programme, Government agencies or public sector undertakings, as the case may be, designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description, -
(1) duly certified by the Director, Defence Electronic Research Laboratory or Chief Managing Director, Electronics Corporation of India Limited, to the effect that the said goods are required for the DIVYA DRISHTI Programme, shall be used only for the DIVYA DRISHTI programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the import of the said goods mentioned in the said list are authorized by the Ministry of Defence under and for the purposes of the DIVYA DRISHTI Programme. |
(Sr. No. 25 has been inserted vide CUS NTF NO. 41/2004 DATE 27/02/2004) |
26. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of DHANUSH Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by work centres of the DHANUSH Programme, Government agencies or public sector undertakings, as the case may be, designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description, -
(1) duly certified by the Member Secretary, Programme Management Board (Integrated Guided Missile Development Programme) to the effect that the said goods are required for the DHANUSH Programme, shall be used only for the DHANUSH programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the import of the said goods mentioned in the said list is authorized by the Ministry of Defence under and for the purposes of the DHANUSH Programme. |
27. |
Machinery, equipment, instruments, components and spares theof, tools, accessories, computer software, mock-ups and models required for the maufacture or repair or overhaul of Advanced Jet Trainer (HAWK- 115 Y) and Adour Mark 871-07 engines. |
If imported by M/s. Hindustan Aeronautics Limited (H.A.L.) |
28. |
Capital equipment required for setting up of facilities for manufacture of Intermediate Jet Trainers (HJT-36) and its engines and other accessories required for these aircrafts. |
If imported by M/s. Hindustan Aeronautics Limited (H.A.L.) |
29. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of SAMYUKTA Programme of the Ministry of Defence. |
If,-
(a) the said goods are imported by works centers of the SAMYUKTA Programme, Government agencies or public sector undertakings, as the case may be, designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) such importers produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description,-
(1) duly certified by the Programme Director or Associate Programme Director, SAMYUKTA Programme, Department of Defence Research and Development, to the effect that the said goods are required for the SAMYUKTA Programme and shall be used only for the SAMYUKTA Programme and that they are not manufactured in India; and
(2) duly certified also by an officer not below the rank of an Under Secretary to the Government of India in the Ministry of Defence to the effect that the import of the said goods mentioned in the said list is authorized by the Ministry of Defence under and for the purposes of the SAMYUKTA Programme.
Explanation.- Nothing contained in this exemption shall have effect on or after the the 1st day of June, 2008. |
(Sr. No. 29 has been substituted vide CUS NTF NO. 36/2008 DATE 17/03/2008)
(Sr. No. 29 has been inserted vide CUS NTF NO. 81/2006 DATE 21/08/2006)
(Sr. Nos. 27 & 28 has been inserted vide CUS NTF NO. 66/2005 DATE 14/07/2005)
(Sr. No. 26 has been inserted vide CUS NTF NO. 48/2004 DATE 18/03/2004) |
30. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of Project ASTRA of the Ministry of Defence. |
If,-
(a) the said goods are imported by authorised works centers of Project ASTRA, as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Project Director ‘ASTRA’, Defence Research and Development Laboratory, Hyderabad, to the effect -
(i) that the said goods in the list are required for Project ASTRA, and that they are not manufactured in India; and
(ii) the import of the said goods in the list is authorized by the Ministry of Defence under and for the purposes of Project ASTRA and shall be used only for Project ASTRA.
Explanation.– Nothing contained in this exemption shall have effect on or after the 1st day of September, 2012. |
(Sr. No. 30 has been inserted vide CUS NTF NO. 110/2006 DATE 20/10/2006) |
31. |
The following goods, required for the Airborne Early Warning and Control (AEW&C) System Programme of Ministry of Defence,-
i) aircrafts, aircraft parts, aircraft engines, aircraft engine parts, including ground handling equipment of aircrafts for defence use:
ii) radars, ESM, CSM, RWR, CMDS, MAWS, Communication and their related components/parts, Electronic components/boards, simulators and related hardware/software;
iii) machinery, equipments including test equipments, instruments, fitting devices, components, spares, jigs and fixtures, dies, tools, moulds, accessories, raw materials, castings, forgings, piping, tubing, consumables, mockup and models;
iv) computer hardware, computer software, accessories and consumables. |
If,-
(a)the said goods are imported by authorised works centers of the Airborne Early Warning and Control (AEW&C) programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Joint Commissioner of Customs or the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office AEW&C, Centre for Air Borne System, Bangalore, to the effect that -
i) the said goods mentioned in the list are required for the purposes of the AEW&C;
(ii) the import of the said goods mentioned in the list are authorized by the Ministry of Defence under AEW&C programme and the said goods shall be used only for the purpose of the AEW&C programme.
Explanation.- Nothing contained in this exemption shall have effect on or after the 5th day of April, 2014 [OLD on or after the 1st day of January, 2012] |
(Sr.No.31 In Column (3) has been subsituted vide CUS NTF NO. 110/2011 DATE 19/12/2011)
(Sr.No.31 has been inserted vide CUS NTF NO. 113/2006 DATE 16/11/2006)
|
31B. |
The following goods, required for the Airborne Early Warning and Control (AEW&C) System Programme of Ministry of Defence,-
i) aircrafts, aircraft parts, aircraft engines, aircraft engine parts, including ground handling equipment of aircrafts for defence use;
ii) radars, ESM, CSM, RWR, CMDS, MAWS, Communication and their related components/parts, Electronic components/boards, simulators and related hardware /software;
iii) machinery, equipments including test equipments, instruments, fitting devices, components, spares, jigs and fixtures, dies, tools, moulds, accessories, raw materials, castings, forgings, piping, tubing, consumables, mockup and models;
iv) computer hardware, computer software, accessories and consumables. |
If,-
(a) the said goods are imported by authorised works centers of the Airborne Early Warning and Control (AEW&C) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Joint Commissioner of Customs or the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office AEW&C, Centre for Air Borne System, Bangalore, to the effect that -
i) the said goods mentioned in the list are required for the purposes of the AEW&C;
(ii) the import of the said goods mentioned in the list are authorized by the Ministry of Defence under AEW&C Programme and the said goods shall be used only for the purpose of the AEW&C Programme.
Explanation. - Nothing contained in this exemption shall have effect on or after the 1st day of January, 2016.". |
(Sr.No.31B has been inserted vide CUS NTF NO. 26/2015 DATE 09/04/2015) |
|
32. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence |
If,-
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office LR-SAM, to the effect that -
i) the goods mentioned in the said list are required for the purposes of the LR-SAM;
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation. – Nothing contained in this exemption shall have effect on or after the 31st day of May, 2011. |
(Sr.No.32 has been inserted vide CUS NTF NO. 85/2007 DATE 10/07/2007) |
33. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purposes of Programme AD of Ministry of Defence |
If,-
(a) the said goods are imported by authorized works centres of Programme AD, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Member Secretary, Programme Management Board, Programme AD or Programme Director AD, Defence Research and Development Laboratory, Hyderabad, to the effect that the goods mentioned in the said list are required for the purposes of Programme AD and shall be used only for the Programme AD and that they are not manufactured in India and the said goods mentioned in the said list are authorized by the Ministry of Defence under and for the purposes of programme AD.
Explanation. – Nothing contained in this exemption shall have effect on or after the 31 st day of July, 2016. |
(Sr.No.33 has been inserted vide CUS NTF NO. 54/2009 DATE 22/05/2009) |
34 |
Ballistic grade aramid yarn |
If,-
(a) the goods are imported by a manufacturer for use in the manufacture of Ballistic grade aramid fabric;
(b) the procedure laid down in the Customs (Import of Goods at concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996 is followed while importing the goods;and
(c) the importer, at the time of importation, in each case, furnishes to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, as the case may be, an undertaking that such aramid fabric shall be supplied only to a manufacturer of bullet proof jackets for further supply to the armed Forces of the Union under the Ministry of Defence or the Police Forces of the States or the Union territories.
Explanation. – The expression “Police Forces of the States or the Union-territories” shall include the Central Reserve Police Force, the Indo-Tibetan Border Police Force, the Special Services Bureau, the Border Security Force, the Central Industrial Security Force and the National Security Guards maintained or constituted under the Central Reserve Police Force Act, 1949 (66 of 1949), the Indo-Tibetan Border Police Force Act, 1992 (35 of 1992), the Border Security Force Act, 1968 (47 of 1968), the Central Industrial Security Force Act, 1968 (50 of 1968) and the National Security Guard Act, 1986 (47 of 1986). |
(Sr.No.34 has been inserted vide CUS NTF NO. 66/2010 DATE 04/06/2010) |
35. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence |
If,-
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office LR-SAM, to the effect that -
i) the goods mentioned in the said list are required for the purposes of the LR-SAM;
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation. - Nothing contained in this exemption shall have effect on or after the 25th day of November, 2011. |
(Sr.No.35 has been inserted vide CUS NTF NO. 64/2011 DATE 19/07/2011) |
36. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, computer hardware, castings, forgings piping, tubing, chemicals, bio-chemicals, refrigerants, raw materials and consumables, ammunition and ground support equipments required for the Medium Range Surface to Air Missile (MR-SAM) Programme of Ministry of Defence |
If,-
(a) the said goods are imported by authorised works centres of the Medium Range Surface to Air Missile (MR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office MR-SAM, to the effect that -
(i) the goods mentioned in the said list are required for the purposes of the Programme MR-SAM;
(ii) the import of the goods mentioned in the said list are authorised by the Ministry of Defence under MR-SAM programme and these goods shall be used only for the purpose of the MR-SAM programme |
(Sr.No 36 has been added vide CUS NTF NO. 102/2011 DATE 18/11/2011) |
37. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, computer hardware, castings, forgings piping, tubing, chemicals, bio-chemicals, refrigerants, raw materials and consumables. |
If,-
(a) the said goods are imported by authorised works centres of the International Thermonuclear Experimental Reactor (ITER) –India, Institute of Plasma Research, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Department of Atomic Energy; and
(b) the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Project Director, (ITER)-India project, to the effect that -
(i) the goods mentioned in the said list are required for the purposes of the ITER –India project;
(ii) the said goods shall be used only for the said project.” |
(Sr.No.37 has been inserted vide CUS NTF NO. 05/2012 DATE 07/02/2012) |
38. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence |
If,-
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office LR-SAM, to the effect that -
i) the goods mentioned in the said list are required for the purposes of the LR-SAM;
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation. – Nothing contained in this exemption shall have effect on or after the 25th day of May, 2012.” |
(Sr.No.38 has been inserted vide CUS NTF NO. 06/2012 DATE 09/02/2012) |
39. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence. |
If,-
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office LR-SAM, to the effect that -
i) the goods mentioned in the said list are required for the purposes of the LR-SAM;
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation. - Nothing contained in this exemption shall have effect on or after the 25th day of November, 2012." |
(Sr.No.39 has been inserted vide CUS NTF NO. 57/2012 DATE 18/10/2012) |
40. |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of Air-to-Air Missile System (Project ASTRA) of the Ministry of Defence. |
If,-
(a) the said goods are imported by authorised works centers of Air-to-Air Missile System(Project ASTRA), as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Project Director, ‘ASTRA’, Defence Research and Development Laboratory, Hyderabad, to the effect that -
i) the said goods in the list are required for Project ASTRA, and that they are not manufactured in India; and
(ii) the import of the said goods in the list is authorized by the Ministry of Defence under and for the purposes of Project ASTRA and shall be used only for Project ASTRA.
Explanation. – Nothing contained in this exemption shall have effect on or after the 1st day of March, 2013” |
(Sr.No.40 has been inserted vide CUS NTF NO. 58/2012 DATE 19/11/2012) |
41. |
Machinery, equipment, instruments, components, spares, jigs, fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence |
If,-
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme, as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Programme Director, Programme Office LR-SAM, to the effect that -
i) the goods mentioned in the said list are required for the purposes of the LR-SAM;
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation. – Nothing contained in this exemption shall have effect on or after the 25th day of May, 2013. |
42 |
Machinery, equipment, instruments, components, spares, jigs and fixtures, dies, tools, accessories, computer software, raw materials and consumables required for the purpose of Air-to-Air Missile System (Project ASTRA) of the Ministry of Defence |
If,-
(a) the said goods are imported by authorised works centers of Air-to-Air Missile System(Project ASTRA), as may be designated by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Defence; and
(b) the authorised works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import, in each case, a list of the said goods with their relevant description duly certified by the Project Director, ‘ASTRA’, Defence Research and Development Laboratory, Hyderabad, to the effect that -
(i) the said goods in the list are required for Project ASTRA, and that they are not manufactured in India; and
(ii) the import of the said goods in the list is authorised by the Ministry of Defence under and for the purposes of Project ASTRA and shall be used only for Project ASTRA.
Explanation. – Nothing contained in this exemption shall have effect on or after the 1st day of September, 2013”. |
43 |
Machinery,equipment,instruments,components,spares,jigs,fixtures,dies,tools,accessories,computer software,raw materials and consumables required for the Long Range Surface to Air Missile (LR-SAM) Programme of Ministry of Defence |
If,
(a) the said goods are imported by authorized works centres of the Long Range Surface to Air Missile (LR-SAM) Programme,as may be designated by an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Defence and
(b) the authorized works centre produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of import,in each case,a list of the said goods with their relevant description duly certified by the Programme Director,Programme Office LR-SAM,to the effect that,
i) the goods mentioned in the said list are required for the purposes of the LR-SAM.
(ii) the import of the goods mentioned in the said list are authorized by the Ministry of Defence under LR-SAM programme and these goods shall be used only for the purpose of the LR-SAM programme.
Explanation.Nothing contained in this exemption shall have effect on or after the 1st day of January,2016.
|
|
44 |
All goods |
If,-
(a) the said goods are imported by the National Technical Research Organisation, (hereinafter referred to as NTRO);
(b) before clearance of the said goods, an officer of NTRO, not below the rank of Joint Secretary to the Government of India, certifies that the said goods are required for strategic systems by NTRO.
Explanation. � Nothing contained in this exemption shall have effect on or after the 1st day of January, 2019. |
45. |
All goods |
If,- (a) the said goods are imported by the Indian Offset Partner (hereinafter referred to as IOP) of the contractor to the National Technical Research Organisation, (hereinafter referred to as NTRO);
(b) before clearance of the said goods, the importer furnishes a duty exemption certificate from an officer of the NTRO, not below the rank of Joint Secretary to the Government of India -
(i) indicating the details of the purchase order placed by the NTRO on the contractor;
(ii) indicating the details of the purchase order placed by the said contractor on the IOP along with the description of the final products and the description and quantity of goods required to be imported for manufacture of the said final products; and
(iii) certifying that the said goods are intended for use in the radars acquired by the NTRO from the said contractor. Explanation. � Nothing contained in this exemption shall have effect on or after the 1st day of January, 2019.". |
(Sr.No.41 has been inserted vide CUS NTF NO. 08/2013 DATE 20/02/2013)
(Sr.No.42 has been inserted vide CUS NTF NO. 16/2013 DATE 25/03/2013)
(Sr.No.43 has been inserted vide CUS NTF NO.42/2013 DATE 30/08/2013)
(Sr.No. 20 amended & 44 & 45 has been inserted vide CUS NTF NO. 20/2014 DATE 11/07/2014)
|